Is there any way to rebuild the database in iTunes?

I've moved my iTunes Library to another hard drive for more space and now it has lost track of the location of many of the songs on the new drive. I have set up the location of the drive in Preferences/Advanced, but it has no effect. Is there any way to rebuild the entire iTunes database at the same time so it is not necessary to locate each of the songs individually?

Hello there, MataPunk.
The following Knowledge Base article has great guidelines for recreating an iTunes Library:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Thanks for reaching Apple Support Communities.
Cheers,
Pedro D.

Similar Messages

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN ????

What happened to your metadata? Are you sure the metadata is gone?
In theory, file carving could be attempted on the data LUNs, but you would need a tool that understands how Xsan lays out data across LUNs in a stripe group and hope your fragmentation isn't too bad. I doubt such a tool exists, but if one does it almost certainly is not publicly available. You should probably contact a data recovery service with experience recovering data from Xsan. Do that before you do anything else if this data is really important.

Is there a way to rebuild the database(s) in ARD without re-installing?

On my intel iMac (10.4.7) my lists will all go offline or "--" all at once... a restart of the app sometimes solves this for a while but eventually, I need to completely delete all of ARD and re-install to restore functionality. Id there a way to rebuild or replace the database(s) aARD uses for this stuff without a complete re-install (which, is not a trivial process)
thanks.
intel iMac Mac OS X (10.4.7)

the app is not crashing with logs. It will become non-responsive frequently while scanning or while refreshing my all computer list. I originally, suspected the not so great DNS and st00pid number of subnets I have to scan to work but I have ARD 3 on my Xserve and the same install has been running issue free for months, on the same network.
I have removed/re-installed ARD a few times on this box (and a dual G5 tower) with the same issue recurring... I just cannot figure out the trigger that makes it all go pear shaped.

I have an older Mac and can't update osx. Is there any way to move the music in iTunes to my newer apple devices?

I can't upgrade Osx 4 and would like to move music and photos to newer Apple devices. Is there any way to accomplish this?

At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
If we can update it to 10.5 then this looks like it works...
http://software-download.name/2010/ipad-file-transfer-mac/
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html

Is there any way to restore my iPod if iTunes won't recognize it?

I bought my husband a 30 gig ipod for Christmas and gave it to him early. Last night I bought and installed a video converter so that he could watch movies on the ipod. This morning when he updated the device with a new video and tried to play it, the screen turned green with little black squares. Itunes does not recognize that the ipod is connected to the computer and I can't turn the ipod off. Is there any way to restore the ipod if Itunes won't recognize it?

Try this, hold the middle button and the menu button for 10 seconds while it is plugged into the computer. See if it will come back to life. You may have to try this several times. Give it a try.

Is there any way to activate the keep identity setting when using a Transfer SQL Server Object Task?

Is there any way to add the "Keep Identity" option to the tables selected for transfer in a Transfer SQL Server Object Task? It seems that would be very useful, yet I can't find an easily available setting for it. I would prefer to
accomplish this within the Transfer SQL Server Object Task since it can copy any new fields added to the source tables, as opposed to having to rebuild a custom Data Flow Task any time a table structure is altered. I thought setting "CopyPrimaryKeys"
to True would do the trick, but I found that only ensures that the column settings are transferred; when the transfer happens, the destination id column is populated based on the specified seed and increment value, not what's actually in the source table.
I'd like to point out that replication isn't really an option here. This is a package that runs a few times a day to keep some data on our website up to date with data in our protected corporate environment.

IIRW there is FastLoadKeepIdentity specifies
whether to keep an identity in OLEDB destination
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Is there any way to change the default AWR thresholds?

Hi Gurus,
Is there any way to change the default thresholds or attributes of AWR reports for a database?
I have a requirement to change threshold for the SQL statements reported based on sharable memory.
*"SQL ordered by Sharable Memory"*
By defaults it reports statements only above 1Mb (I think it is in Bytes). So I can find only one statement being reported in this category or some times even nil.
*"Only Statements with Sharable Memory greater than 1048576 are displayed"*
It would be great help for me if you guys can help me out as we have issues related to memory often.
Thanks and regards
Satish

U can do it using DBMS_WORKLOAD_REPOSITORY.MODIFY_SNAPSHOT_SETTINGS pararmeter
DBMS_WORKLOAD_REPOSITORY.MODIFY_SNAPSHOT_SETTINGS(
retention IN NUMBER DEFAULT NULL,
interval IN NUMBER DEFAULT NULL,
topnsql IN VARCHAR2,
dbid IN NUMBER DEFAULT NULL);

Is there any way to know the T-code from the screen?

Hi friemds,
it s a general question. but I found relavant for posting here.
I saw our group friens giving some T-codes for spro functions (eg: SNRO, M/06), bbut how to know the transaction from path. i.e. If I go to condition types screen, there I could not see any transaction. is there any way to know the T-code from the screen?

Hi,
Listed here are the various ways you can find the list of transaction codes and their usage:
Use transaction SE11 - ABAP Dictionary:
Fill in the Database table name and click the Display button.
- TSTC table will contain all the Tcodes and
- TSTCT table will contain all the Tcodes with Texts.
Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
or
Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
or
Goto transaction SE93
There are two ways where you can find the list of transaction codes in SE93.
Method 1:
You must be familiar with the starting characters strings for each of the R/3 application modules.
Assuming you know that most Materials Management transaction codes start with MM.
In the Fields: Transaction code, type in MM* and press the function key F4
The list of transaction code starting with MM will be displayed.
Method 2:
On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
I know a particular T Code and can enter and work on it. How do I know what is the menu path for that T Code?
Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path.
This is helpful only in case of SAP Menu not in case of SPRO - ie IMG.....
Reward if Helpful,
Regards,
Archit.

HT1386 After syncing my iphone I found that all of my notes were erased from the phone. Is there any way to retrieve the notes now that they have been erased?

After syncing my iphone I found that all of my notes were erased from the phone. Is there any way to retrieve the notes now that they have been erased? I had some very important notes that I have to be able to find. Anyone know how?

I think those contacts still in iphone database. So you can back up you iphone with itunes to get iphone database off your iphone. Then access the SQLite batabse.
http://support.apple.com/kb/HT1766
All data included with the backup is stored in a SQLite database format with the data within various folders not easily accessible.There are some 3rd party utilities that provide for extracting select data from an iPhone's backup and iphone database such as this one.
http://www.datarecoveryforiphone.com/

Type your questionI am trying to deactivate a version and transfer it to another computer, however I have lost the card with the serial number. Is there any way of retrieving the serial number?

Type your questionI am trying to deactivate a version and transfer it to another computer, however I have lost the card with the serial number. Is there any way of retrieving the serial number?

Hello Irene,
you should have a look at Adobe's database, to see what's stored/saved about your accounts. Here you will find general infos about your Adobe Account
https://www.adobe.com/account.html and to find your serial number have a look there http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Hans-Günter

Is there any way to prevent the OS from querying the Superdrive when start

Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?

Is there any way to retreive the FileName in the mapping

Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.
I am using the adapter specific message attributes in the file sender CC.
Thanks,
Ravi
null

Yes you can retreive it. Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
Or
Just do whatever mentioned in this weblog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
---Satish

Is there any way to repeat the last action on a new selection?

I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

Is there any way to Mask the Name when a select statement is issued?

Dear all,
Is there any way to mask the name .. i mean if User issue a select statement in a customer table the real name should come like ' ABCXXXDEFXXCFXX'... Which is not the actual name?
e.g if Name: CHIEV SONG MEE
If user issue a statment select * from customers;
The Result Should come something Like this:
Name
CHXXV SXNG MXX
Thank You

user3029023 wrote:
but it seems there is no option in oracle it self which can be used as there they are saying to get a data masking software which we can't due to some internal issues....I would not say that. How one implements masking depends entirely on the requirements that need to be met.
For example, schema A owns all the tables. Schema B can be created as a "trusted" schema - in other words, schema A trusts schema B and allows it full access (with grants) to its tables. Schema B implements data masking as views. For each table in A, a view exists in B that implements the required masking. B can now grant select access on these views to user C. User C will see the same data object names in B as it would have if it used A - only, by using the B data objects it uses masked data objects and not the original source data objects.
Another example - schema Dev is to have all the data objects of schema Prod, but masked where needed. One can use CTAS (Create Table As Select) to create the required tables in Dev with masked values where relevant. This Dev schema can be "refreshed" on weekends by dropping all tables and getting a new fresh copy of production data and masking it - ready for the next week's development cycle.
If the application use is for example APEX, then instead of coding SQL directly as reporting regions to display, a function is used instead. APEX supports reporting regions where it calls a function and this function provides the APEX run-time with the SQL to execute and contents to render. It is easy to use this approach to implement logic in functions that masked column data depending on who the APEX user is, the security/role attributes of the user, and so on.
No there is not a single "+mask this column!+" feature in Oracle.. but that does not mean that such a feature is not supported and cannot be implemented. Oracle has a very comprehensive and rich set of tools - more so than most (if not all) other RDBMS products.
It is up to the architect/designer/developer to use this toolkit in creating a system that meets the specific requirements at hand.

Is there any way to identify the particular socket connection is closed ?

Is there any way to identify the particular socket connection is closed or not ?
Any methods ???
How can the program knows the connection is lost or some thing ...
Is the socket throws some excpetions when there is no active connection ???
namanc

If you get an IOException when you try to use the socket, the connection was obviously closed.
The correct way for an application to know if the socket was closed is:
1) the server sends a message indicating that the socket should be closed
2) the client closes the socket itself

Is there any way to rebuild the database in iTunes?

Similar Messages

Maybe you are looking for