Is there any way to repair the ouput on an Airport Express?

My ancient Airport Express is only putting out one channel with a whole bunch of static. Is there any way to pop in a new output where the mini-jack plugs in? (I've tried a bunch of different minijack adapters, btw. It's definitely the output that's borked.)

Easiest thing to do is probably buy a digital-to-analog audio converter (see example below), and just use the optical output of the AirPort Express, which is probably still fully functional (test by plugging in a TOSlink cable and sending music to the AEx...if the other end of the fiber optic cable glows red, it's working). You can velcro or glue it to the side of the AirPort Express if you need to.
http://www.amazon.com/Digital-Optical-Analog-audio-converter/dp/B004C4WPXA

Similar Messages

Is there ANY way to configure the wired ports on Airport Extreme with 7.6.1 software?

I need to connect a Cisco router to one of the wired ports because I'm creating a home lab with several switches and routers and attached hosts. I need the VERY BASIC ability to set (or even just to SEE) what IP address the AirPort is using/assigning, but with the current AirPort Utility, you apparently can't show the DHCP table for wired connections or set up a static pool of addresses to use or really, to do anything else that is ABSOLUTELY BASIC networking configurations for a router. I don't even know what range of IP addresses the AirPort is using for the wired ports.
I love this device - it works much better than my old Linksys that I replaced a couple years ago, but this is the Apple Nannies taking things too far. Sure, make the products easy to configure and use, but stop taking away the ability for advanced users to actually use the product because all you're doing is ******* off your power users - which are the exact people whose friends always ask for recommendations on what products to buy. I've always recommended Apple products to everyone, but if they're going to engineer everything so that only stupid people can use them, then only stupid people will buy (and recommend) them. (Can you tell I'm annoyed that I've wasted so much time on a completely unnecessary and irrelvant side-issue when I should be already working on my actual work project?)
/Rant-off
So, does anyone know how to access the actual configuration of the AirPort Extreme so I can use a static IP address for my Cisco router that's plugged into one of the AirPort's wired ports? That's all I need.
Thanks.

The AirPort assigns IP addresses via DHCP in a range you specify. You may also elect to assign devices their own static IP addresses. That does not involve the Extreme at all, though you may "reserve" those addresses in its DHCP Reservations table.
AirPort Utility > Network > Network Options...
Assigning static IP addresses obviates any need to determine the IP addresses the Extreme assigns.
Update its firmware to version 7.6.3.

I have a iPhone 3GS and the power connection prongs are damaged and it won't charge or sync. Is there any way to repair?

I have a iPhone 3GS and the power connection prongs are damaged and it won't charge or sync. Is there any way to repair? Or, at least is there a way to charge so I can write down phone numbers and othe rinformation. My power charge is totally out right now.

If it will not turn on - you have zero chance of getting anything off the phone.

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Iphone 3GS was dropped and will not turn on or respond to USB connection. Is there any way to extract the data off when it is not responding so that I can restore to my new phone?

The phone is physically intact, but you can see the LCD is cracked behond the glass. I have tried plugging it in, tried putting it on the charger, and resetting it using the off and home buttons, bit response. I don't need the phone to work, but I do need to be bale to back it up in order to restore to the new phone. Is there any way to extract the data or back up the hard drive without repairing the phone? Just curious what my options are before I spend cash trying to fix the phone and find out there was another way to get the data. Any thoughts here or should a good repair shop being able to create a backup somehow?

Im not going to be much help because I don't know of anything else to besides take it somewhere that fixes electronics and see if they can get it off some how maybe if you take it to an apple store they can do something to get your information.

I smashed my ipod, is there any way to fix the touchscreen as it is now stuffed

i smashed my ipod, is there any way to fix the touchscreen as it is now stuffed

Apple will exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Is there any way to change the power supply on a hp elite 8100 sff

hello . Is there any way to upgrade the power supply from the standerd 240W psu . the pc is a hp elite 8100 sff ( quad i7 2.8ghz nvidia quadro 295 nvs and 8 gb ram )

Joleney-
I do not know of any way to turn off the Sleep button. If yours does not work, there might be an internal problem like a loose connection in the iPad.
One thing you can try is to hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow if it appears. If successful, the iPad will restart after a couple of minutes.
If the Apple logo never appears, it is likely your Sleep button is bad. If the iPad is still in warranty, show it to an Apple Store Genius. You may get a replacement iPad if the Genius can not fix it.
If the iPad is out of warranty or there is no Apple Store near you, look for an Apple Authorized Repair Center near you. There may be one in your city. If out of warranty, the cost of a repair would most likely be less than Apple's replacement price. <Apple Authorized Repair Centers>
Fred

Is there any way to prevent the OS from querying the Superdrive when start

Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?

Is there any way to retreive the FileName in the mapping

Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.
I am using the adapter specific message attributes in the file sender CC.
Thanks,
Ravi
null

Yes you can retreive it. Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
Or
Just do whatever mentioned in this weblog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
---Satish

Is there any way to repeat the last action on a new selection?

I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

Is there any way to Mask the Name when a select statement is issued?

Dear all,
Is there any way to mask the name .. i mean if User issue a select statement in a customer table the real name should come like ' ABCXXXDEFXXCFXX'... Which is not the actual name?
e.g if Name: CHIEV SONG MEE
If user issue a statment select * from customers;
The Result Should come something Like this:
Name
CHXXV SXNG MXX
Thank You

user3029023 wrote:
but it seems there is no option in oracle it self which can be used as there they are saying to get a data masking software which we can't due to some internal issues....I would not say that. How one implements masking depends entirely on the requirements that need to be met.
For example, schema A owns all the tables. Schema B can be created as a "trusted" schema - in other words, schema A trusts schema B and allows it full access (with grants) to its tables. Schema B implements data masking as views. For each table in A, a view exists in B that implements the required masking. B can now grant select access on these views to user C. User C will see the same data object names in B as it would have if it used A - only, by using the B data objects it uses masked data objects and not the original source data objects.
Another example - schema Dev is to have all the data objects of schema Prod, but masked where needed. One can use CTAS (Create Table As Select) to create the required tables in Dev with masked values where relevant. This Dev schema can be "refreshed" on weekends by dropping all tables and getting a new fresh copy of production data and masking it - ready for the next week's development cycle.
If the application use is for example APEX, then instead of coding SQL directly as reporting regions to display, a function is used instead. APEX supports reporting regions where it calls a function and this function provides the APEX run-time with the SQL to execute and contents to render. It is easy to use this approach to implement logic in functions that masked column data depending on who the APEX user is, the security/role attributes of the user, and so on.
No there is not a single "+mask this column!+" feature in Oracle.. but that does not mean that such a feature is not supported and cannot be implemented. Oracle has a very comprehensive and rich set of tools - more so than most (if not all) other RDBMS products.
It is up to the architect/designer/developer to use this toolkit in creating a system that meets the specific requirements at hand.

Is there any way to identify the particular socket connection is closed ?

Is there any way to identify the particular socket connection is closed or not ?
Any methods ???
How can the program knows the connection is lost or some thing ...
Is the socket throws some excpetions when there is no active connection ???
namanc

If you get an IOException when you try to use the socket, the connection was obviously closed.
The correct way for an application to know if the socket was closed is:
1) the server sends a message indicating that the socket should be closed
2) the client closes the socket itself

Is there any way to get the height/width of an image before importing it in the indesign document.

Hi All,
I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
Is there any way to get the height/width of image without importing it in the indesign document.
Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
At this point I am clueless where to search next.
Any help will be appriciated.
Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
Thnx,
D.

You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
Perhaps Quicktime could provide you with a platform independant solution.

Is there any way to specify the default version of LabVIEW?

I have a sinking feeling that the answer to this question is "no." With more than one version installed, is there any way to set the default LabVIEW version for opening a VI? I have both 7.1 and 8 installed, and usually only use 8 to open an example or look at something posted here. When I do that, it resets all the OS hooks so that the default action for opening a VI is to open it in version 8. I've even gone so far as to create actions to open files in 7.1 and 8, but it always resets my default action.
I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
Ugh. I hate it when software thinks it knows what I want better than I do.

eaolson wrote:
I have a sinking
feeling that the answer to this question is "no." With more than
one version installed, is there any way to set the default LabVIEW
version for opening a VI? I have both 7.1 and 8 installed, and usually
only use 8 to open an example or look at something posted here.
When I do that, it resets all the OS hooks so that the default action
for opening a VI is to open it in version 8. I've even gone so
far as to create actions to open files in 7.1 and 8, but it always
resets my default action.
I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
Ugh. I hate it when software thinks it knows what I want better than I do.
Add
in the LabVIEW.ini file of those versions you do not want to rewrite
the registry on startup to point to themselves for VI files, the
following:
RegisterExtensions=False
Of course the VersionChooser utility mentioned earlier is even more convinient.
Rolf Kalbermatter
Message Edited by rolfk on 06-28-2006 08:21 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Is there any way to set the default for *.doc document so that Pages opens them automatically?

I have a number of Ms Word documents because I used to have Word for Mac before the last OS release. Now, of course, when I double-click on them, I get a message saying that PowerPC isn't supported.
Now Pages will open these files. Is there any way to change the default for *.doc files so that a double-click will open them in Pages?
(Instead of me going to the trouble of finding out where they are actually located on the hard drive so that I can open pages and say - here, open this file--even though you didn't create it--)

Click on a .doc file and type Cmnd I to open Get Info. In the Open with: menu select Pages, then click on Change All…
Walt

Is there any way to repair the ouput on an Airport Express?

Similar Messages

Maybe you are looking for