Is there any way to restart the bluetooth module without restarting Mountain Lion?

Im using a Logitech V470 bluetooth mouse. The sensitivity and responsiveness was excellent at first. However, after about 2 to 4 days of using the mouse, it becames jumpy and lags. I found out that it can be solved by restarting the machine. Is there any way of restarting only the bluetooth module but not the whole system? I've tried turning it off and on the preferences, but it didn't solve the jumpy problem. I've also read about resetting the PRAM/NVRAM and it clears up some problems, but according to the instructions given, it will reset the boot setting. So, I don't want to loose my bootcamp partition.
Thanks.

Hello:
To my knowledge, no to your question.
However, I would suggest you reset both the PRAM and SMC at least once.
Barry

Similar Messages

Is there any way to disable the expanding scroll bars in Mountain Lion?

Since I never scroll by dragging the scroll bars with the cursor, I find the expansion of the scroll bars to be a distracting and even productivity limiting feature. Is there any way to disable the expansion of the scroll bars (perhaps with a terminal command)? System Preferences doesn't have an option to switch this feature off as far as I'm concerned.
Thanks a lot in advance.

No!

Is there a way to change the cursor hotspot systemwide on Mountain Lion?

Hello community.
Is there a way to change the cursor hotspot on Mountain Lion, systemwide?
Like editing the original cursor file (or downloading one) and replacing the original one?
Reason: when I enlarge the arrow, the "absoulute" tip (top of the white outline) gets distant from the internal tip (top of the black core), so sometimes the white outline needs to stick out if I want to click the approprate area - because the hotspot is on the internal tip. To me it's counter-intuitive. I would prefer to have the hotspot on the absolute edge of the cursor (tip of the white outline). This is not debatable - this is my private preference, and I've read today that it's not only mine - there is a number of users who want the same.
I know it's always been like this on Macs, so please avoid questions like "why to you want that", answers like "get used to it" or any kind of hostility, for these are useless. The quiestion is how can I change it, if possible.
Thanx guys!

I don't know how you get to the System folder in Mavericks; and even if I found the folder with the alternative cursors in it, I would have no way of switching to any of them. The designers have obviously not anticipated that anyone would wish to do this.
The System Preferences has an adjustment under Accessibilty which allows the user to change the size of the cursor, but nothing else.
So I guess that there is no way to make the change without actually re-engineering the System somehow.
If someone can find a way, I will be most pleased to be enlightened; only please make the directions explicit.

Is there any way to know the battery strength without 3rd party app?

Is there a way to do this without installing an app? Most reviews of such apps question the accuracy of their readings.
How does one know the "actual" battery strength as the OS inderstands it to be(besides looking at the tiny icon on the top right of the screen)?

How does one know the "actual" battery strength as the OS inderstands it to be
You can't! Desktop Macs may try to 'count the electrons in and the electrons out' to determine the state of charge. It doesn't appear the touch does; many times I will get the Red 20% charge warning and then when I later turn the touch on the battery is still Green. This leads me to believe that the touch battery monitor simply looks at the voltage under load.

I don't know the password to the old Apple ID on this phone. Is there any way to delete the iCloud ID without the old password?

Help!!!

No, not unless you have a more current iCloud ID that was created by revising this old ID. If you do, you can go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone, then delete the account. When you're done, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.
If that isn't the case, and you don't know the password for the old ID, you'll have to reset it yourself (see http://support.apple.com/kb/PH2617) or contact the Apple account security team for assistance resetting it: http://support.apple.com/kb/HT5699.

My husband dropped his phone in water now it won't turn but when you switch the lock button the side it vibrates and we have been charging it and it's getting warm?? is there any way to retreive the information on without turning it on? Is their a memory

I really need help with this question. Can someone please shed some light on this subject.

Let it dry thoroughly in a very dry environment for a couple of days and then try to charge it for more than 15 minutes. Then try to power it on again. I did the same and after two days my phone turned on and although I could not make calls or use data, and the screen was erratic, I was able to connect to iTunes with my Mac and do a backup of both contacts and stuff like photos, settings, etc. afterwards I was able to restore my new iPhone from the backup and I got almost everything back including notes.

My computer somehow restarted then deleted all my progress from Word documents. Is there any way to get these documents back without purchase of a data recovery software?

Recently when I open my Mac the screen stays black until I press the start button a few times. Usually at this point it's in sleep mode. This time, however, the computer restarted completely, losing any word documents that I had left open prior. Is there any way I can recover these files without a purchase of a data recovery software? I've tried looking in the 'recent' tab, but it didn't save anything I have done in the last week, and finals are this coming week. Please help!

If the system just Restarted on it's own, Shut down while you were working on something then started back up all those changes, edits, you had done in that app, document, are gone.

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Is there any way to turn my Bluetooth LED on again?

My Bluetooth is working (send/receive).
But the Bluetooth LED indicator doesn't on.
Anyone got the same problem?
Z60m 2529 EAU
Bluetooth Firmware's version is 299 and the software is 7kbf09ww.

I thought that too, but I am 100% sure it is not now.
I made it light on again some times, by reinstall XP and did some configure of wireless and Bluetooth.
I just can't make it light on again in the recent couple try.
I am thinking about the firmware problems.
( After I got problem with Bluetooth firmware update, some times ago. I got this problem)
Is there any way to refresh my Bluetooth firmware back to version 208?
Bluetooth is working fine. Just don't feel good about that indicator is not working.

Is there any way to restore the 'Open New Tab' option in the tab bar drop-down menu?

After years of using tabbed browsing in Firefox, I've long-since gotten used to right-clicking the tab bar, and selecting the top menu item 'Open New Tab'. So much so that it has become reflexive. Now with v4, when I perform the same action, it now just reloads the current page. Is there ANY way to restore the option to the pull-down menu? I don't wanna have to move my pointer all the way to the other side of the screen just to open a new tab... (T_T)

Hello, I suffered from a similar problem with the new search bar type. I've found that you can go into '''about:config''', then search for '''browser.search.showOneOffButtons''' boolean and toggle that. This should restore the old functionality. (You might need to restart your browser)
Note that, like always, edit your '''about:config''' at your own risk.
credit: [http://www.askvg.com/how-to-disable-new-one-click-search-bar-interface-in-mozilla-firefox/ askvg.com]

Is there any way to restart Cancled Background job

Dears,
Now we have a very important background job need to run everyday, but sometime it will be canceled due to memory is not enough.
Is there any way to restart Cancled Background job automatically ?
Thanks,
Michael

Hi Michael,
To start the cancelled job manually
At SM37 just mark the job then click Job -> Change and just reschedule.
For auto
Create another job with same program name and variant , then create background processing event which gets trigger only when your job gets failed.
For Event Creation kindly reach out to ABAPers and for Event based Scheduling you can contact basis team.
BR Vaibhav

Is there any way to change the power supply on a hp elite 8100 sff

hello . Is there any way to upgrade the power supply from the standerd 240W psu . the pc is a hp elite 8100 sff ( quad i7 2.8ghz nvidia quadro 295 nvs and 8 gb ram )

Joleney-
I do not know of any way to turn off the Sleep button. If yours does not work, there might be an internal problem like a loose connection in the iPad.
One thing you can try is to hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow if it appears. If successful, the iPad will restart after a couple of minutes.
If the Apple logo never appears, it is likely your Sleep button is bad. If the iPad is still in warranty, show it to an Apple Store Genius. You may get a replacement iPad if the Genius can not fix it.
If the iPad is out of warranty or there is no Apple Store near you, look for an Apple Authorized Repair Center near you. There may be one in your city. If out of warranty, the cost of a repair would most likely be less than Apple's replacement price. <Apple Authorized Repair Centers>
Fred

Is there any way to prevent the OS from querying the Superdrive when start

Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?

Is there any way to retreive the FileName in the mapping

Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.
I am using the adapter specific message attributes in the file sender CC.
Thanks,
Ravi
null

Yes you can retreive it. Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
Or
Just do whatever mentioned in this weblog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
---Satish

Is there any way to repeat the last action on a new selection?

I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

Is there any way to restart the bluetooth module without restarting Mountain Lion?

Similar Messages

Maybe you are looking for