Is there any way to run older games on the booklet...

everytime I try to run age of empires 2 I get the error message "make sure the video card is compatible with direct x"
im very upset, age of empires is one of my favoritee games and I was wishing I could run it on my favorite booklet.
i have been able to do so using a custom driver for the intel GMA 500 card, but I loose the power save profile, i am unable to change screen brightness and no aero effects.
any one knows a better way?
thanks !

take a look at this thread, you can find some useful info about running old and some new games on Booklet there.

Similar Messages

  • Is there any way to run a timer on the presentation screen during two consecutive presentations?

    I administer exams that require running two consecutive presentations and interact with the person being tested. With each candidate we use two different presentations, so I can't just make only one presentation.  Is there a way to have a timer display on the presentation screen through both presentations? Each person only has thirty minutes to get thru both presentations. If one only takes ten minutes, then they have twenty for the final one. I'd like to get away from using egg timers.

    take a look at this thread, you can find some useful info about running old and some new games on Booklet there.

  • Is there any way to run Classic on an Intel mini running Tiger?

    Due to space limitations, I'm having to retire my old faithful Powermac 6500. It's hard to believe that it's 10 years old. It's running OS8.6, and can run OS9 even though it seems slow and memory intensive.
    Is there any way to run Classic mode on my Intel Core Duo mini? It's hardly a matter of life and death, but I still have several older Mac-based games like Railroad Tycoon II and Myst that I enjoy, and they won't run on the newer mini.
    If space wasn't a problem, I would keep the old machine running just to play games, but it's not possible now.
    Any assistance would be appreciated.
    Thank you,
    -Bill

    The only way is to install (free) emulator programs such as BasiliskII or SheepShaver.
    I have both installed, though I only use them to run older programs to rescue old data from obsolete formats.
    Installing and configuring them is not trivial, unfortunately.
    Links here:
    http://basilisk.cebix.net/
    http://gwenole.beauchesne.info/projects/sheepshaver/
    I don't know if either is suitable for the kind of games you want to play. Graphics is typically where emulators fall behind. But again, I have no experience with those games.

  • Is there any way to run abap program in dialog process with process chain?

    Hi.
    I just want to run custom abap program in every 30min.
    so I made process chain and connect abap program.
    but it returns NOTHING when background running.
    the program has ABSOLUETLY no problem when it's running DIALOG process.
    custom program is modified from sap standard program for my use.
    so complicated and hard to read that I cann't figure out what's problem in backgound job and even hard to debug in background process.
    is there any way to run abap program in dialog process in every 30 min.?
    or call BSP page or call function.
    any solution will be helpful that excuting PROGRAM or FUNCTION or BSP PAGE in schedule job and should running dialog process.
    thanks.
    Lee.

    Hi,
    did you try using sm36 transaction?
    1Give these values in Gereral data
    Create one sample job "SAMPLE JOB"
    Priority "A"
    Execu target - Your application server
    2Click start conditon
    schedule according to ur requirements.
    3.Click Step button
    Give your ABAP program name.
    fill variants if it has any variants.
    if it is useful assign points
    Regard,
    Senthil Kumar.P

  • I have an iPod whose contents I want to transfer to a newer Ipod.  At some stage I lost the music files from my library.  Is there any way to get them back from the older iPod and put them onto the newer one again?  I stupidly synced the wrong one.

    I have an iPod whose contents I want to transfer to a newer Ipod.  At some stage when I thought I was syncing correctly I wasn't so I lost the music files from my library.  Is there any way to get them back from the older iPod and put them onto the newer one again? 

    Have you not got a backup of your content on, for example, external drives ? If not then you could have a look to see if any of the utilities mentioned in this old post still exist and work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893

  • Is there any way to limit video game usage in safari???

    Is there any way to limit video game usage in safari???

    Parental Controls might work for you >  Mac OS X: Parental Controls

  • Is there any way to run a report from database?

    Is there any way to run a report from database using trigger?
    A report needs to be printed out when a new row is inserted into a table.

    If you are using the Reports Server it is possible to start a report from a trigger by using the UTL_HTTP package (in the sys schema) to call the report URL. This should work with DESTINATION=PRINTER.
    Hope this helps.

  • I need to transfer up to 200 pages and keynote files from my macbook to my PC. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as word-friendly?

    I need to transfer up to two hundred Pages and Keynote files from my macbook running on Mac OS X 10.6.8 to my PC running windows. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as a word-friendly file?

    I need to transfer up to two hundred Pages and Keynote files from my macbook running on Mac OS X 10.6.8 to my PC running windows. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as a word-friendly file?

  • I have an old MacBook (Mac OSX 10.5.8) with iPhoto '08.  Is there any way to back up not only the photos, but the way I have organized them into events and labeled them?

    I have an old MacBook (Mac OSX 10.5.8) with iPhoto '08.  Is there any way to back up not only the photos, but the way I have organized them into events and labeled them?

    Yes. Back up the Library.
    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

  • Is there any way to execute process chain from the portal?

    Hello,
    Is there any way to execute process chain from the portal? I dont want to link process chain with any of report. I want to have a button in some of portal folders. User presses the button and it executes the process chain.
    I was thinking about to create a fake planning cube, aggregation level and planning function. I call FM within the Fox planning function that runs the process chain. But it should be done within the report.
    Any ideas?
    Thanks a lot in advance!

    Hi.
    I want to have a button in some of portal folders
    You mean that you want to use some link in EP ?
    Regards.

  • Is there any way I can get rid of the noise my iPod makes when I plug it in to charge without turning the volume of the whole IPod (4th Generation) down?

    I have a 4th generation IPod touch. Today I downloaded the new iOS 6.0.1 and I have a question. Is there any way I can get rid of the noise when I plug it in to charge? I had it set that way before, and I can't seem to figure out how I did it. I found when I turned down the over all volume it gets rid of it, but I don't want to change the over all volume. Thanks so much for you help and Happy Holidays.

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled. As most of these are classical, it is inappropriate to have them separated into songs that play any old time. Can I restore them to the original albums?

    Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled into individual 'songs'. As most of these are classical and folk, it is inappropriate to have them separated into songs that play any old time (ie, a movement from Beethoven's 5th symphony followed by a folk song followed by one excerpt from Vivaldi's Four Seasons, etc. Can I restore them all to the original albums and make sure the shuffle doesn't happen again?
    Thanks!

    goldberry wrote:
    Thanks! That has worked, but only partially - there are still some Beethovens mixed in with the Vivaldis. I'm sure I installed these as total albums.
    I have noticed that too from time to time, I generally move the files into the correct folder and fix the index in itunes when one won't open, occasionally.

  • My itunes account was disabled for some reason.  I changed password in iforgot and still didn't work.  I could log in but not make purchases from the store so I set up a new login/account .  Is there any way to move my music to the new account?

    My itunes account was disabled for some reason.  I changed password in iforgot and still didn't work.  I could log in and see my music but not make purchases from the store or even redeem an itunes gift card so I set up a new login/account with another email account of mine. On the new account I can redeem my gift card and download items onto my ipad2.  Is there any way to move my music to the new account?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

    I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

    I sent it via FedEx. 
    Call FedEx.  They will be able to track their own packages.  They will let you know if your iPod Nano was delivered and to who!

  • The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

    The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed.  Thanks!

    If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
    If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership. 
    Please refer to : Lightroom and Creative Cloud FAQ
    Regards
    Rajshree

Maybe you are looking for