Is there any way to save dynamic data intact to a spreadsheet file?

Does anyone have an idea on how to save dynamic data to a spreadsheet type file i.e. each input has a column and the last column is the time stamp portion of the data? I am using a DAQmx configured device and the DAQ Assistant Express vi. What I am trying to create is a basic datalogger. With all the Express VIs, you would think that there is a function for this. I am trying to avoid doing the data string assembly manually. Any thoughts?

Take a look at the Write LAbVIEW Measurements File Express VI. The output may not be exactly what you want but you can open them up in Excel, for example.
In addition if you have an suggestions for LabVIEW you can go to Contact NI and click on the feedback link. From that link you can submit suggestions on new features etc.

Similar Messages

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?

Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?

Only if this program will get the iPod out of recovery mode.
RecBoot: Easy Way to Put iPhone into Recovery Mode

Is there any way to save my data after i have updated my phone and backed it up first

Is there any way to retrive or save my data after updating my phone and its locked, asking to restore to original settings in itunes.

If there is a passcode on your iPhone, which you don't know, there is no way around it. You'll have to restore factory settings. The passport is meant to protect sensitive data, and that is, what it does.

Is there any way to save a customized toolbar layout?

Is there any way to save a customized toolbar layout?

Printing the layout helps, I can pretty much do it from memory..
Once you have '''freshly generated the layout''' you want
# Open your profile folder by typing about:support int the location bar (or Help > Troubleshooting information...)
# Click on Open containing folder
# use File > Exit or "Firefox" button > Exit to get out of Firefox (Not the "X" in upper right corner as that just closes the Window)
# in your profile f older select localstore.rdf and copy ("Ctrl+C") then paste it aback to make a copy, repeat to create at least one more copy, The original and "localstore - Copy.rdf " and "localstore - Copy (2).rdf" will all be the same, about 4KB to start with. (not 18 KB not 76 KB)
# bring Firefox back up.
''Freshly generated ''means rename or delete the original localstore.rdf while Firefox is down, restart Firefox and customize your toolbars as you want them.
If you have a problem with a corrupt localstore.rdf bring Firefox down and in your profile directory delete or rename the localstore.rd then rename a copy to localstore.rdf
Reference: http://kb.mozillazine.org/Corrupt_localstore.rdf see references to backup copy, you should, of course, be taking periodic backups of all your personal data, and for Firefox that includes your profile.

I purchased some movies off iTunes from my account from my fathers IPad as a gift but didn't realize can not view if not logged with my account. Is there any way to save directly to the IPad (regardless of account)? Or transfer to him so he can view have?

I purchased some movies off iTunes from my account (but from my father IPad) to download as a gift,
but didn't realize he can not view if not logged in with my account.
Is there any way to save directly to the IPad (regardless of account) so he can view?
Or transfer to his account?
Or is any was to cancel the recent purchase if can not transfer as I will not watch these myself?

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

My contacts are organized in different groups. An iPhone trade show app (Vinexpo) displays exhibitors infos and allows to create new contacts. Is there any way to save a new contact in a specified group instead of the contacts root? Thks in advance

My contacts on my iPhone are organized in different groups. I have downloaded a trade show app which gives infos on the exhibitors of the show. It offers to create new contacts from these info. Is there any way to save these new contacts in a specified group instead of putting them into the contacts root, where they are mixed with all the old ones? By the way, can we create a new contacts group directly from the IPhone, without having to go through the sync process with the PC?
Thanks a lot in advance

Sorry, I forgot to bookmark the thread where the app was mentioned, but searching for "group" or "contacts" should bring a few results in the AppStore.

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN ????

What happened to your metadata? Are you sure the metadata is gone?
In theory, file carving could be attempted on the data LUNs, but you would need a tool that understands how Xsan lays out data across LUNs in a stripe group and hope your fragmentation isn't too bad. I doubt such a tool exists, but if one does it almost certainly is not publicly available. You should probably contact a data recovery service with experience recovering data from Xsan. Do that before you do anything else if this data is really important.

Is there any way to retrive the data from my USB Key

Hello,
I have a usb key I have been using on a Win 7 desktop computer and a Mac Book Air to put in Data on a spread sheet.
I interchange to put in the data between the computer and my MBA without any problem.
I am today not able to open the usb memory key in either-Computer or the MAC Book Air.
Does that mean I have a coruppted USB memory key and the data lost for ever?
I have just put the USB memory key in my computer and it says File System CDFS.
I put it in MAC Book Air and it would not open either!!
Is there any way to access my data. I have no back up...

If the USB drive won't mount on either computer, it's probable that the drive has failed, in which case it's unlikely that you can recover any data from it. You can do a web search for something like "flash drive file recovery" and you'll find a number of utilities that purport to do file recovery, but all the utilities I'm familiar with require that the drive at least be mountable. There may be services that could attempt recovery, but they tend to be expensive.
The moral of the story is: never have only a single copy of a critical document, and if you must, never, never have your single copy only on a flash drive (or floppy, for those "old timers" who still use floppies).
Regards.

Is there any way to print the data inside the Notes field of MIR6 Report

Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.

There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.

Iphone 3GS was dropped and will not turn on or respond to USB connection. Is there any way to extract the data off when it is not responding so that I can restore to my new phone?

The phone is physically intact, but you can see the LCD is cracked behond the glass. I have tried plugging it in, tried putting it on the charger, and resetting it using the off and home buttons, bit response. I don't need the phone to work, but I do need to be bale to back it up in order to restore to the new phone. Is there any way to extract the data or back up the hard drive without repairing the phone? Just curious what my options are before I spend cash trying to fix the phone and find out there was another way to get the data. Any thoughts here or should a good repair shop being able to create a backup somehow?

Im not going to be much help because I don't know of anything else to besides take it somewhere that fixes electronics and see if they can get it off some how maybe if you take it to an apple store they can do something to get your information.

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time .

Is there any way too see all data on all enteties an user owns.

Hi all,
Is there any way to see all data an user owns in CRM2011?
Maybe an custom report or view?

I could only think of one solution to this, a little bit of code to get a list of records a user owns. The List contains Entity objects with the Id & LogicalName. You could do this with a report too but you'll have to query every entity...
public List<Entity> GetOwningRecords(IOrganizationService service, Guid systemUserId)
List<Entity> owningRecords = new List<Entity>();
RetrieveAllEntitiesRequest retrieveAllEntitiesRequest = new RetrieveAllEntitiesRequest();
retrieveAllEntitiesRequest.EntityFilters = EntityFilters.Entity;
retrieveAllEntitiesRequest.RetrieveAsIfPublished = true;
RetrieveAllEntitiesResponse retrieveAllEntitiesResponse = (RetrieveAllEntitiesResponse)service.Execute(retrieveAllEntitiesRequest);
foreach (EntityMetadata entityMetadata in retrieveAllEntitiesResponse.EntityMetadata)
if (entityMetadata.OwnershipType != OwnershipTypes.UserOwned)
continue;
try
QueryExpression query = new QueryExpression(entityMetadata.LogicalName)
ColumnSet = new ColumnSet("ownerid"),
Criteria =
Conditions =
new ConditionExpression("ownerid",ConditionOperator.Equal, systemUserId)
EntityCollection result = service.RetrieveMultiple(query);
foreach (Entity entity in result.Entities)
owningRecords.Add(entity);
catch (FaultException<OrganizationServiceFault>)
Console.WriteLine(String.Format("Couldn't retrieve the records for {0}", entityMetadata.LogicalName));
catch (Exception)
Console.WriteLine(String.Format("Unexpected error for {0}", entityMetadata.LogicalName));
return owningRecords;
Hope this helps

Is there any way for updating wrong data in ODS and infocube?

Hi all
Is there any way for correcting wrong data in ODS and infocube?

You could do a selective deletion, by specifying the filter values, so that you only delete a subset of the entire data. You could then do a re-load for the same selection so that there is no duplication of records.
This is on the assumption, that your incorrect data is due to some incorrect update or transfer rules, which you have now corrected (before the re-load).
mate, you have mentioned that You could then do a re-load for the same selection .
could you please tell me how to do a re-load ? thank you very much

Is there any way to save an iphone with water damage?

Is there any way to save an iphone 5 with water damage? I know older phones you could some times use rice to dry it out.

1, Place in ziplock bag with dry raw white rice for a week.
2, When that doesn't work take to Apple and purchase out of warranty replacement.
3, If you have already turned on the power the damage is done so just proceed to step 2.
Allan

Is there any way to save dynamic data intact to a spreadshee​t file?

Similar Messages

Maybe you are looking for

Is there any way to save dynamic data intact to a spreadsheet file?