Is there any way to unify the columns view between playlists?

When you add columns or resize columns it only effects whatever playlist you are in.
Is there any way to make them all the same?

When you create a new playlist, it will model the current column view of your (main music) library in list view.

Similar Messages

Is there any way to hide the column header in BW workbook?

I have inserted a query into a workbook. But I don't want the column header to be shown. Is there any way to hide the column header? Thanks.

Hi,
If you want to do any custom formatting to the workbook and you do not want it to reset when you refresh the workbook,
You will have to You can deactivate the function for adjusting the formatting (Adjust Formatting after Refreshing) in the Display Options of the Query Properties.
When you do this, you can have your own formatting for the workbook and it will not be affected when you refresh the workbook.
Regards,
Joe

Is there any way to spy the data communicating between the GPIB and the PC.

HI
I have a device communicating with my PC using IEEE 488 GPIB card. Do we have any way to spy the data exchanged by the device and the PC running a different application.
I am trying to program an application that needs to gather data from a HP 54602A - 150 MHz - 4 Channel oscilloscope using a IEEE 488 add-on card. I am able to talk to the device and request the device number through MAX. I need to know the other commands to the oscilloscope. Can any one help me in this regard.
With Regards
S.Gopal

Launch NI Spy (Start >> Programs >> National Instruments >> NI Spy). You may want to configure it to capture 64k of data instead of 64 bytes since the strings sent to the device may be larger than 64 bytes.
Start capturing with NI Spy and then run the application. All of the calls made to the device will be captured in NI Spy. You can then look at the data buffers to determine what strings are being sent to your device.

Is there any way to add the column in the verifier table?

Hi folks,
I am new to WFR.I am using AP solution project.While sending my invoice to WFR,I can see that one column is not picked by the verifier table.Can I use Supervise Learning to add the column there?Will this configuration be supported by Oracle then?

Hi Ajay,
I understood that we cannot add FY for header details.
Cleint requirement was to add special periods (client is happy with this), so I have done added periods and also I need make the
file description changes in Planning layout because integrated excel is active.
My doubt is how to Transport this layout and profile changes, I could see "transport from" in planning layout menu.
Is there any additional things I have to do for transporting layout changes.
Regards
Shanu

Is there any way to display the Design View in fluid grid pages?

After upgrading to the newest version of DW CC 2014, I noticed that the Design View is disabled in Fluid Grid pages. You can only use the Live View to edit those pages. The Design/Live button displays on non-fluid pages.
I'm wondering if there is a work-around to allow Design View editing on fluid pages. It is a major hassle to try to edit some things in the Live View. It would nice to have a choice.

Have you actually tried using is? Try this?
1) Create a new Responsive Layout. We’ll call it demo.php, fluid.css and the usual accompanying DW files.
2) Enter demo.php and progress is normal. Everything works. You can choose to view both Live and Display and edit accordingly.
3) Close down DW.
4) Open DW and open demo.php
5) There is NO LONGER a Display View option and Live View does not EDIT. (at least it doesn't for me)
6) I can ONLY edit work in CODE view.
Thus, on brand new files, all is fine. The moment DW is closed and the files becomes “old” it can no longer be seen or edited properly.
How am I supposed to provide support to clients? How can I access a Responsive site I built last week when Live View will not edit and Display will not display?
I feel this is a programming error, not a purposeful act.

Is there a way to place the column browser next to the sidebar vertically?

I updated to the newest itunes and I am thoroughly frustrated trying to navigate it. Is there any way to place the column browser next to the side bar? Its really inefficient trying to scroll through it over the library. Also I want my default interface to be as close to the previous version of itunes as possible (without the Song, Artist, Album, etc headings). Basically I want the Songs head to be my default when I open itunes, but instead it always sends me to the thumbnails of artists.
Sorry for the multipart thread, I'm just fedup trying to figure out all these issues myself.

Take a look at this link, http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/

Is there any way to set default column widths in the Finder's Column view

When my Finder windows open in column view, all the columns are always VERY wide. I have to then spend time resizing them to a managable width. Is there any way to set default column widths in the Finder's Column view?
<Re-Titled By Host>

No, because you can't set a columns view default.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Is there any way to Mask the Name when a select statement is issued?

Dear all,
Is there any way to mask the name .. i mean if User issue a select statement in a customer table the real name should come like ' ABCXXXDEFXXCFXX'... Which is not the actual name?
e.g if Name: CHIEV SONG MEE
If user issue a statment select * from customers;
The Result Should come something Like this:
Name
CHXXV SXNG MXX
Thank You

user3029023 wrote:
but it seems there is no option in oracle it self which can be used as there they are saying to get a data masking software which we can't due to some internal issues....I would not say that. How one implements masking depends entirely on the requirements that need to be met.
For example, schema A owns all the tables. Schema B can be created as a "trusted" schema - in other words, schema A trusts schema B and allows it full access (with grants) to its tables. Schema B implements data masking as views. For each table in A, a view exists in B that implements the required masking. B can now grant select access on these views to user C. User C will see the same data object names in B as it would have if it used A - only, by using the B data objects it uses masked data objects and not the original source data objects.
Another example - schema Dev is to have all the data objects of schema Prod, but masked where needed. One can use CTAS (Create Table As Select) to create the required tables in Dev with masked values where relevant. This Dev schema can be "refreshed" on weekends by dropping all tables and getting a new fresh copy of production data and masking it - ready for the next week's development cycle.
If the application use is for example APEX, then instead of coding SQL directly as reporting regions to display, a function is used instead. APEX supports reporting regions where it calls a function and this function provides the APEX run-time with the SQL to execute and contents to render. It is easy to use this approach to implement logic in functions that masked column data depending on who the APEX user is, the security/role attributes of the user, and so on.
No there is not a single "+mask this column!+" feature in Oracle.. but that does not mean that such a feature is not supported and cannot be implemented. Oracle has a very comprehensive and rich set of tools - more so than most (if not all) other RDBMS products.
It is up to the architect/designer/developer to use this toolkit in creating a system that meets the specific requirements at hand.

Is there any way to activate the keep identity setting when using a Transfer SQL Server Object Task?

Is there any way to add the "Keep Identity" option to the tables selected for transfer in a Transfer SQL Server Object Task? It seems that would be very useful, yet I can't find an easily available setting for it. I would prefer to
accomplish this within the Transfer SQL Server Object Task since it can copy any new fields added to the source tables, as opposed to having to rebuild a custom Data Flow Task any time a table structure is altered. I thought setting "CopyPrimaryKeys"
to True would do the trick, but I found that only ensures that the column settings are transferred; when the transfer happens, the destination id column is populated based on the specified seed and increment value, not what's actually in the source table.
I'd like to point out that replication isn't really an option here. This is a package that runs a few times a day to keep some data on our website up to date with data in our protected corporate environment.

IIRW there is FastLoadKeepIdentity specifies
whether to keep an identity in OLEDB destination
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Is there any way to change the label of my VO attributes

hi ,
Is there any way to change the label of my VO attributes so that it will have more logical presentation
Thanks
Musahib

Hello Alex,
I 've just checked my webbeans and the COLUMN_NAME_LABEL property is not use by the EditCurrentRecord, FindForm and RowsetBrowser webbeans.
I had the following line to my custom EditCurrentRecord, FindForm and RowSetBrowser.
So I can set Column display name ones for each webbeans.
It's better than do it with different methods for each webbeans!!!!
if((String)qView.getProperty(attrs[attrNo].getColumnName() + "_LABEL") != null)
rField.setPromptText((String)qView.getProperty(attrs[attrNo].getColumnName() + "_LABEL"));
In the ViewCurrentRecord something was done but with errors. Oracle Developers used getName() method instead of getColumnName()!!! So I rewrite it.
if((String)qView.getProperty(attrs[attrNo].getName() + "_LABEL") != null)
sHeader = (String)qView.getProperty(attrs[attrNo].getName() + "_LABEL");
Hope this will help!
Email if you need more.
[email protected]
Jean-Nokl

Is there any way to put the values inthe system matrix which is non editabl

is there any way to put the values inthe system matrix which is non editable...
this Q is not that much priority since i had achieved the requirement other way round by having user defined matrix ... but if i get the way for this it will help my add on performance much better...

Hi Raj, I didnt get all the details but here some ideas how you can solve your issue:
Depending in the system form you are working you can always use a DBDataSource in order to manipulate the rows in a matrix. It's much better as using the objects of the matrix itself. In this case you can use:
oMatrix.FlushToDataSource()
oDBDsource.SetValue("U_Quan", pVal.Row, "101")
oMatrix.Clear()
oMatrix.LoadFromDataSource()
As you can see in SetValue i'm obtaining the Column, then the row number and then setting a NEW value for this cell.
Please consider if you can use DBDataSource instead of UserDataSource.
If the answer is yes then you can use the following:
oMatrix.FlushToDataSource()
'//Get the line you want
matrix.GetLineData(pval.row)
'//Call the Userdatasource assigned to that column
UserDataSource = UserDataSources.Item("ItmCode")
'//Set the new value
m_UserDS.ValueEx = "A02520"
oMatrix.LoadFromDataSource()
You can also use:
oMatrix.Columns.Item("ItemName").Cells.Item(l_rownum).Specific.String = "A02520"
In case you are not assigning the string in a combobox of course.
Good luck!
Felipe

Is there any way to prevent the OS from querying the Superdrive when start

Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?

Is there any way to retreive the FileName in the mapping

Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.
I am using the adapter specific message attributes in the file sender CC.
Thanks,
Ravi
null

Yes you can retreive it. Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
Or
Just do whatever mentioned in this weblog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
---Satish

Is there any way to repeat the last action on a new selection?

I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

Is there any way to identify the particular socket connection is closed ?

Is there any way to identify the particular socket connection is closed or not ?
Any methods ???
How can the program knows the connection is lost or some thing ...
Is the socket throws some excpetions when there is no active connection ???
namanc

If you get an IOException when you try to use the socket, the connection was obviously closed.
The correct way for an application to know if the socket was closed is:
1) the server sends a message indicating that the socket should be closed
2) the client closes the socket itself

Is there any way to unify the columns view between playlists?

Similar Messages

Maybe you are looking for