Is there any way to use bluetooth and force audio out at the same time?

I have an older treadmill that uses IFit which means a program on my phone controls my treadmill via an aux audio cable. I like using BT headphones so I don't have cords hanging. So...I'm trying to figure some way to either a) have iphone connected physically to treadmill but bt'ing music to my headphones at the same time or b) get iphone to communicate with two different bt devices simultaneously. (Treadmill can also be controlled via BT, but I still need the BT for headphones)
Any ideas would be great. I currently have cable running from treadmill to iphone and headphones via a splitter but it's a LOT of cord hanging which makes things difficult.

No. FaceTime is one on one only.

Similar Messages

  • HT204380 Is there any way to "FaceTime " between 3 or 4 users at the same time?

    Is there any way to "FaceTime " between 3 or 4 users at the same time?

    No. FaceTime is one on one only.

  • Is there a way to work with two or more app at the same time on iPhone or iPad

    Is there a way to work with two or more app at the same time on iPhone or iPad?

    What i am attempting to achieve is to work with at least two app at the same time. For example: select any picture from my albums to attach them in an email. Another example is get data from an app to use it with the calc app. And there are more exaples for it. And for sure I need support for an iPad air. I mencioned the other tablet just to try to be a bit clearer.

  • TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

    How can i enable both paired bluetooth and ios keyboard input at the same time?
    This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

    You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
    I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
    https://developer.apple.com

  • Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

    Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

    IIRC, OPTION-click on the Apple icon on the menu bar and select either Restart or Shutdown. Alternatively,
    Control-Command-Eject
    Quit all applications (after giving you a chance to save changes to open documents), then restart the computer
    Control Option-Command-Eject
    Quit all applications (after giving you a chance to save changes to open documents), then shut down the computer

  • Is there a way to view different portions of a document at the same time?

    Is there a way to view different portions of a document at the same time?

    No. I suggest you leave feedback for the Pages team regarding this. You can find it under the Pages menu > Provide Pages Feedback. That takes you to the same page as this link.

  • Is there a way to play to 2 blue tooth devices at the same time?

    is there a way to play to 2 blue tooth devices at the same time from my ipad?

    If you want to have 2 sets of headphones plaing at the same time, just get a headphone splitter.  Here's a link to several that will work on your iPad......http://search.yahoo.com/search;_ylt=Ao7XF2KB2RaGRXX1SKOKmICbvZx4?p=headphone+spl itter+ipad&toggle=1&cop=mss&ei=UTF-8&fr=yfp-t-701

  • Possible to use both optical out AND regular line out at the same time?

    I currently have my computer speakers (logitech z560) hooked up to the mac pro via regular stereo jack in the back. I have an extra receiver that I would love to hook in to supply me with some needed sound for movie watching and what-not.. Is there a way to enable both line out - digital and line out at the same time?

    You can set DVD Player's "Audio output" to "Digital Out" in its "Disc Setup" preference, while other applications use Line Out.
    You could use a splitter on Line Out to feed your current speakers, and analog Line In on your receiver. When you want sound to both systems, set the receiver to Line In. When you want to watch DVDs, set it to Digital In. This will give you surround sound if the DVD has multichannel sound, and the receiver supports more than two channels.
    If you really want the same output on the Mac Pro Line Out, and Digital Out, you can use the "Auxiliary Device Output" effect in Audio Hijack Pro
    <http://www.rogueamoeba.com/audiohijackpro/>
    It will not support more than two-channel audio.

  • Is there any way to judge whether two streamings are casted by the same client?

    Hello,
    My app use two different streams to send video and audio from flash clients to the server.
    So another client need to judge whether two streamings are casted by the same client or not.
    Is there any way to do this?
    For example, if it is possible to get ip address from netStream instance, it will be a solution.
    Could anyone teach me this?
    Thanks in advance!

    From the FCP 7 User Manual. You can access your copy of the Manual through the HELP menu on the menu bar at the top of your main screen.
    x
    Subtract Composite Mode
    Subtract darkens all overlapping colors. Whites in the foreground image go black, while whites in the background image invert overlapping color values in the foreground image, creating a negative effect.
    Blacks in the foreground image become transparent, while blacks in the background image are preserved.
    Overlapping midrange color values are darkened based on the color of the background image. In areas where the background is lighter than the foreground, the background image is darkened. In areas where the background is darker than the foreground, the colors are inverted.
    The order of two clips affected by the Subtract composite mode is important.
    Difference Composite Mode
    The Difference composite mode is similar to the Subtract composite mode, except that areas of the image that would be severely darkened by the Subtract composite mode are colored differently.
    The order of two clips affected by the Difference composite mode does not matter.

  • Use Siri and older voice command at the same time?

    Hi all,
    It is my understanding that Siri cannot be used simultaneously with the older version voice command.
    If I wish to use the older voice command function, I have to deactivate Siri, which is terribly incovenient.
    Is there any way I can use both simultaneously?

    No, it's not normal.  You should be able to send and receive from any mail account set up on your device, whether the account is also set up on another device or not.  Have you tried sending email from your @me account on your Mini?  Does that work properly?
    Here are some troubleshooting steps you can try on your Mini:
    On Safari and go to www.apple.com to confirm that your connection to the internet is working properly
    Go to Settings>Mail,Contacts,Calendars>Fetch New Data, make sure Push is set to On, tap Advanced at the bottom, tap your @me.com address and make sure Push is checked.
    Go to Settings>Mail,Contacts,Calendars>Default Account (in the Mail section) and confirm that you have selected your @me.com address as your defalut.

  • Is there a way to open different books on various apps at the same time like in android devices?

    hello good peolpe, i bought an ipad mini retina for books reading and i would like to know if there is a way i can open a book with different apps like  i do on android device where you can use various apps to open differents books at the same time, i would like to also know if there is a way to do the same thing but with power point and word files, and how can i open them on my ipad and transfer them, thanks every one for their time

    Currently you can't. Maybe in iOS 8 that will be released soon.
     Cheers, Tom

  • Any way to have two DVD SP projects open at the same time?

    Hi
    Since it is likely that I'm going to re-build all the menues in my PAL DVD in a new NTSC project, I'd like to know if there is any way for me to have two separate DVD Studio Pro projects open at the same time. That way I can easily check and copy location coordinates for the buttons, copy text, etc, etc.
    When I open my new project when the old still open, DVD SP just closes the old and opens the new project.
    If it was possible, it would make everything much easier for me, since I have 15 menues to re-create
    Thanks!
    Natasha
    Mac OS X (10.4.9)

    If you just require a visual reference, you can take screen grabs of your first project and open them in Preview...
    Open your project, and press Shiftcommand(apple)4 and the pointer turns into a little cross-hair.... you then click-hold & drag a marquee around the section of the screen you need as reference, then when you release the mouse button a screen grab is taken of that portion you selected.
    It will be saved to your desktop as 'Picture 1'
    you can repeat this for different sections of the project (picture 2, picture 3 etc), and open them in preview.
    Not an ideal solution, but might be of help.

  • Is there a way to restore more than one MacBook Pro at the same time from an image? .

    I restore each MacBook Pro one at a time from an Mountain Lion image on a firewire Hard Drive but each MacBook has to be done one at a time. When I re-image the PC's here at work I'm able to Ghost as many laptops I want simultaneously.
    Thank you

    They are a few different models of the MacBook Pro ranging from 15.4" i7's to 17" i7's. I would use the same models together though when imaging them just like I do with PC's. For example I would Ghost 5 Lenovo T420 Thinkpads at the same time which all share the same exact specs and config. Looking to do the same with the MBP. I have .dmg image of OSX 10.8.1 on a firewire drive which I'm using. I image all my MBP's with this drive, the only downside is I have to do each MBP one at a time.
    Thanks

  • Is there a way to see or play two video tracks at the same time?

    I have video shot using two cameras at the same event.  If I take the video and put it in a sequence, say video1 and video2, how can I watch both tracks at the same time so I can edit them?  I tried using multi-camera monitor and have that show video1, while watching video2 in the right hand panel, but it doesn't work very well.  By that, I mean the multi-camera monitor does not play at the same time.  Instead, it stops, then when I play the other monitor it is still until I stop the other one.  Then, it "catches up".  If I play the multi-monitor, the other one is still until I stop the multi-cam monitor.  So, anybody have a better solution that I can use where they both play at the same time?
    BTW, my hardware is brand new and I have a 6-core i7-3930K processor with 16 GB of memory, so I don't believe the problem is with my hardware not being enough to run PPro 5.0 correctly.

    "adobe multicam tutorial"
    http://tv.adobe.com/watch/short-and-suite/multicam-sync-and-editing/

  • MSI MegaPC 651 and two audio streams at the same time

    Running Showshifter Time Shifting playback through 5.1 SPDIF, I get the sound of the live stream and the playback stream at the same time, any ideas on how to fix this?
    Spec:
    MSI MegaPC 651
    P4 2.66GHz
    512Mb DDR 333MHz
    Seagate 120GB 7200rpm 8mb
    LiteOn LDW-401S DVD+RW
    MS8606M TV@nywhere
    Windows XP Home
    Showshifter v2.10.2235

    Hi, I don't know this for a fact, but I suspect Video will, & Audiowill not.

Maybe you are looking for

  • Simplest/most reliable setup for 2 mini's+ext HD+backup+printer?

    Hello and a happy 2009 to everyone, I'm a recent switcher (replaced one PC with a mini). Using it for internet/email and getting to grips with OpenOffice 3.0; transferred photos and music onto an ext HD and using them with iTunes and iPhoto (and tryi

  • Problem with rendered attribute in jhs 10.1.3.3

    We are currently trying to migrate our applications from jhs 10.1.3.2.52 to jhs 10.1.3.3.87 using jdeveloper 10.1.3.5. We are facing a problem with all the detail groups structured inside detail group regions - they have all disappear from the pages.

  • Version BC to PS

    Hi Experts, We are activating Business Content to PS. When active the objects 0PS_C041 or 0PS_C021 for example, it's showing both rules of 7.0 and 3.5 version as below: Which the correct to use? Why the 7.0 version stop in infosource and the 3.5 vers

  • Move file server in DFS

    i have an older w2k3 file server that holds my DFS namespace.  I have a second DFS server that is w2k8.  I want to move my all of my files to the new server.  is replication the best path or robocopy?  I also want to attempt this as seemless as possi

  • Help with various iPod touch problems ;O

       Hey guys! Recently ( about a month ago) I jumped in the pool with my iPod 4g in my pocket. I didn't notice until about 12 minuites late. After two days it finaly came back on. Now when it came back on the screen was always very dark regardless of