Is there any way to write on NTFS HDDs?

Hello, I recently got a MacBook Air as my late birthday gift. But i have an External Hard Drive that's been Formatted into "NTFS" Now, i know OS X can read NTFS but can't Write. so is there any app that let's me write on NTFS formatted Hard drives? i have a couple of files that needs to be moved to the Hard Drive  because i need to save space on my Mac. Any suggestions? Thanks in Advance!

Yes. Look for Paragon and/or Tuxera applications on the Internet.
Ciao.
http://www.paragon-software.com/home/ntfs-mac/
http://www.tuxera.com/products/tuxera-ntfs-for-mac/
I have not used them.  Mixed resuts have been reported.
Message was edited by: OGELTHORPE

Similar Messages

  • Is there any way to write to a socket after shutting it down?

    Guys is there any way to write to a socket after using the shutdownOutput() method?
    I get this complain at runtime
    java.net.SocketException: Cannot send after socket shutdown: socket write error

    Your question embodies a contradiction in terms. Shutting down the socket means that you're telling the other end there is no more data. So you can't send more data. And even if you could, the other end wouldn't read it, because it would think it had already reached end of stream. Because that's what you told it.
    If you don't want HTTP keep-alive, turn it off via the appropriate HTTP header.
    You should be using HttpURLConnection for this, not a Socket. That takes care of your reading problem: it knows how to process the content-length header.

  • Is there any way to write a Java prg without main()

    I would like to know Is there any way to write a Java program without using main() function.

    > i am unable to execute the program ..............i
    think there must be a main method through with the
    program starts
    The program can be compiled and run. After running it, you'll see "They'll kill you for that" followed by something like "java.lang.NoSuchMethodError: main" and finally someone with a big Volvo will burst into your room and runs you over.

  • Is there any way to write-enable an NTFS-format WD external Hard Drive ?

    I have a WD Elements external HD unit, 1TB previously formatted NTFS under Windows XP on a PC. I would like to use this HD unit to both read and write data using both the Windows PC and a MacBook Pro. But when connected to the MacBook Pro (USB), the HD unit shows up as Read Only.
    Is there a way to write-enable the HD unit without losing, or having to backup/restore, the mass of data already saved there ?
    I have tried installing NTFS-G3 on the MBP, as suggested elsewhere. Having done so, when I "get information" about the WD unit, the disc format shows as "Windows NT File System (NTFS)" and not NTFS-G3 as expected. Ran chkdsk on the WD under Windows to iron out any problems in the disc's file system. It ran for several hours before completing successfully, but there was no change at all - the unit is still read-only after re-connecting to the MBP.
    Can anyone help out please?

    Why would you expect it to say NTFS-3G? NTFS-3G is just a program that translates the NTFS to something the Mac OS can deal with. It doesn't change the format of the hard drive. The drive is formatted with the New Technology File System (NTFS), not the NTFS-3G file system.
    Were you not able to write to the drive with NTFS-3G installed? Did you install the free version? If so, did you install MacFuse, also? It is required for the free version of NTFS-3G.
    Edit:
    I just plugged in an NTFS drive and I'm guessing what you were looking for was something to indicate what was doing the translation. On mine I get, "Windows NT File System (Tuxera)." So, I think I understand what you meant before. My guess is as I stated above. Make sure you also have MacFuse installed if you are using the free version of NTFS-3G.
    Message was edited by: Barney-15E

  • GUYS!! Is there any way to write BLOB's 4K using Oracle thin driver

    I've been trying for 3 days to do that but nothing worked ...
    Not
    setBinaryStream(x, new ByteArrayInputStream(anArrayWith10KBytes), anArrayWith10KBytes);
    nor setBytes(x, myArray), or setObject(x, myArray).
    Is there any way to store Blobs to Oracle 8.1.6 using the thin driver ????????????
    Please help ... cause I really need it !!!
    Best regards,
    Stefig

    Hi Stefig
    Following code help you to store the files >4k in BLOB column in Oracle database
    test is a table in which TEST is BLOB column
    String url = "jdbc:oracle:thin:@.....";
    String user = "user name";
    String password = "password";
    Connection conn = null;
    PreparedStatement aQuery = null;
    ResultSet rs = null;
    try
    Class.forName("oracle.jdbc.driver.OracleDriver");
    conn = DriverManager.getConnection(url,user,password);
    conn.setAutoCommit(false);
    Statement stmt = conn.createStatement();
    stmt.execute("insert into test values (EMPTY_BLOB())");
    rs = stmt.executeQuery("select TEST from test");
    rs.next();
    BLOB blob =((OracleResultSet)rs).getBLOB(1);
    File f = new File(filename);
    FileInputStream io = new FileInputStream(f);
    OutputStream os = blob.getBinaryOutputStream();
    int size = io.available();
    byte[] buffer = new byte[1024];
    int length=0;
    while((length=io.read(buffer)) != -1)
    os.write(buffer,0,length);
    io.close();
    os.close();
    stmt.execute("commit");
    catch()
    Good Luck
    From
    Sachin

  • Is there any way to write  error show in a operator to a file??

    Hi Team,
    I want to write errors whatever comes during execution of scenario in a file that shown in operator window.
    error like 'invalid number','no data found' such type of message generally show in operator window.
    such type of message i want to rite in file for debugging purpose.

    Hi,
    Yes u can.
    Have a look,
    Re: Using GetPreviousLog and OdiOutFile in a package
    Thanks,
    Guru

  • I have a MacBook Pro, I recently bought a microsof word for it but its in spanish, since all my work its done in English, it there any way I an adapt a dictionary so it gives me suggestions when i write?

    I have a MacBook Pro, I recently bought a microsof office for it,  but its in spanish, since all my work its done in English, it there any way I an adapt a dictionary so it gives me suggestions when i write?

    Your Mac already has a Spanish and an English Dictionary.
    May be you only need to select them.
    Open Dictionary.app and under preferences select the languages you need.

  • Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

    I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
    1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
    2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
    3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
    4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
    5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
    6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
    7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
    8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
    IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
    i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
    thanks,
    K
    Message was edited by: K Paton

    1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
    Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it.  The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
    2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
    Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
    3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
    It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
    4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
    It's the connection on your phone. Samsung Galaxy SII? Android software?  What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot,  name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7,  I don't know the layout of that software, but presumeably similar.
    5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
    Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
    6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
    It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
    As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page  into view. Other option is opening a second tab with same website and just go between tabs to reference material.
    7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
    If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
    8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
    Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
    Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
    - Ceridwyn2

  • Is there any way to repeat the last action on a new selection?

    I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

    Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
    I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
    Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

  • Is there any way to get the height/width of an image before importing it in the indesign document.

    Hi All,
    I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
    I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
    I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
    Is there any way to get the height/width of image without importing it in the indesign document.
    Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
    At this point I am clueless where to search next.
    Any help will be appriciated.
    Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
    Thnx,
    D.

    You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
    Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
    For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
    Perhaps Quicktime could provide you with a platform independant solution.

  • Is there ANY way to get QOS with an airport extreme base station?

    I recently moved and decided to go with Primus VOIP for my phone line. It works fine as long as i don't have any torrents going...if i do then call quality goes to **** (i wish someone would've told me before)
    I was told to use a QOS on teh VOIP ports...but my airport extreme doesn't support this (and apparently neither will the new one). Honestly this is something Apple REALLY needs to fix. This is outrageous. They're supposed to be on teh cutting edge of technology, and their routers don't even won't properply with VOIP services??? That's ********.
    Is there any way i could get this to work - perhaps thru software?
    It seems the only solution i have is to get a Linksys router and sell off the airport

    Sorry that this may not seem like an ideal solution, but one option is to use an application that runs on a Windows PC that allows you to format HDDs for HFS+. Once formatted as such, it can be shared out to either OS X, Windows, or Linux users from an AirPort Extreme or Time Capsule. HFS+, like NTFS, supports much larger HDDs.

  • I accidentally formatted my portable hard drive when setting it up for time machine. Is there any way for me to get back my lost files?

    I have an external hard drive of the brand Western Digital.
    Before I got my iMac I moved a lot of my important files from my PC to the hard drive and today I went on and connected it to my iMac to move my files over to it.
    When it had connected a window popped up that asked if I wanted to use this hard drive with the program Time Machine and create backups. Without thinking it trough enough and reading the warning properly (I'm stupid I know) I clicked "yes". I then realised how stupid it was and cancelled the formatting of the hard drive. But somehow the program still managed to delete all my important files and can't find any way to get them back. Neither can I connect the hard drive to my PC anymore so I can't check if the files are still there (which I doubt they are since I can't see them on my iMac either).
    And now I wonder: is there any way for me to get back my lost files or are they lost forever?
    Thank you in advance!
    //Gina

    A data recovery specialist or some data recovery programs should be able to help.  Most format simply rewrite the directory tree saying no files are on this disk.  The bits that represent the files are still flipped appropreiately so they still exists, you just don't have the location info to get at them.  Secure formats and erases rewrite each bit to a zero or 1 or random so the data is then truely gone.  This type of format takes a long time to complete.
    I'm not making a recomendation of a particular program but here is one company that does what you ask:
    http://www.remosoftware.com/mac-recovery  The cost is pretty high but I'm sure they don't sell many copies and need to cover their development costs.
    Good luck and don't write anything on the freshly formatted disk until you decide what to do.

  • Is there any way to create objects in jstl even if its not a java bean

    please someone help me :<(
    thx in advance for the time you'll spend on my question.
    i am translating some code in jsp with embedded java to jstl. and in scriptlets they created java object of some class and using it in loop. but that class is not bean, so i can't use <jsp:useBean> tag so how do i do that here is the code
    <% TabLayoutConfiguratorImpl tabsConfigurator = new TabLayoutConfiguratorImpl();
    %>
    <logic:iterate id="tab" name="tabList" type="TabItem" >
    <% // compute href
    if (!tabsConfigurator.isHidden(tab))
    -----statements-----
    %>
    </logic:iterate>
    how can i create TabLayoutConfiguratorImpl class object and use everything should be done in jstl? is there any way at all?
    here is my class
    package conf;
    import javax.servlet.http.*;
    import org.apache.struts.tiles.ComponentContext;
    public class TabLayoutConfiguratorImpl implements TabLayoutConfigurator
    public void configure(HttpServletRequest request) {
    HttpSession session = request.getSession();
    ComponentContext context = ComponentContext.getContext(request);
    this.configureDefinition(context);
    java.util.Iterator i = ((java.util.List) context.getAttribute("tabList")).iterator();
    while (i.hasNext())
    TabItem tab = (TabItem) i.next();
    this.configureTab(tab, session);
    // subclasses should override this if there the attributes in the Definition
    // need to be manipulated
    protected void configureDefinition(ComponentContext context)
    // default implementation does nothing
    // subclasses should override this if tabs in the definition
    // need to be manipulated
    protected void configureTab(TabItem tab, HttpSession session)
    // default implementation does nothing
    // subclasses should override this if they want to hide tabs in the
    // configuration
    public boolean isHidden(TabItem tab)
    // default implementation returns false - ie they are visible
    return false;
    }

    I don't see what is wrong with
    <jsp:useBean id="tabsConfigurator" class="com.mypackage.TabLayoutConfiguratorImpl"/>
    The class has a no-args constructor at least. The useBean tag will work with it. Probably.
    But still, some code just can't be translated into scriptless JSTL.
    Calling methods which take parameters is one of those things.
    In this case you probably want to write a custom tag to work with your tabs
    I would probably look at using custom tags like this:
    <%@ taglib prefix="tab" uri="/WEB-INF/TabLayout.tld"%>
    // tab to create the configurator.
    // either export it as a var, or use other tags only nested within this one
    // so you can get access to the configurator.
    <tab:configure var="configurator">
      <tab:render configurator="${configurator}" tab="${tab}">
    </tab:configure>I don't know exactly what the scriptlet code will be doing. But I think a custom taglib would be the only way to eliminate scriptlet code that you have here.

  • Is there any way to create a style sheet in APEX?

    Hi experts,
    I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
    Is there any way to create a style sheet in APEX any version?
    I want to create a style sheet and use APEX report column link to it.
    Thanks.
    Cow

    Well, if that is the case, then you'll need to do some PL/SQL programming to write a package to create all of that for you, then execute the package when the 'link' column is clicked.
    After your package is written, change the attributes on your link column to be a URL instead of page in your application and call it like:
    javascript:{MypopUp2('http://your.server.name/print/owner.package_name.sub_procedure?key=#COL01#',800,600);}
    On my system, I created a new DAD and user just for this one purpose, to read an select the information in my report, generate the HTML to display the data, etc. without leaving a loophole someone could exploit to get direct data manipulation access. My report though is a form-type report of all the data from about 40 tables for that one 'master' record, with css formatting included. I'm not directly generating a css file based upon data within the database, but simply adding the css formatting into the HTML file my package generates.
    Does this help your problem?
    Bill Ferguson

  • Is there any way to turn off the auto formatting in Pages?  I just want to type a letter and add pictures and titles, and Pages keeps changing font sizes and doesn't let me "Do it my way".  I HATE this!

    Is there any way to turn off the auto formatting in Pages?  I'm using a blank document, so I figured I could write my letter and add pictures any way I wanted to.  But NO!  Pages keeps changing the font size!  I typed a large heading as a title, and when I try to change to a smaller font for the body of the letter, it changes the size back to the larger size!  I am getting SO FRUSTRATED!  I've spent over an hour trying to get the stupid program to let me just type my letter!  Can anyone help?

    The only one left is the "unsubmitted text" dialogue, which would not be a problem if I were not a Facebook user; after updating the "Richard is..." field (which does not require a manual submit to actually send) I get the above message. This is obviously Safari just not realising that the info has been sent and is therefore (I imagine) one for Apple themselves to answer!!
    You're welcome Rich. Glad to help.
    Not being a Facebook User, I'm not sure how to respond to the error situation. However, this would be something to report to Apple as a bug via the Safari Menu. First, open to the page in question, then select "Report Bugs to Apple".
    Mahalo for the and Aloha from Big Island.

Maybe you are looking for