Is there anybody know the meaning of Condition control in pricing?

Hi everybody,
When I create a sales order in CRM,and the system will call IPC for pricing calculation,
Object "pricingcondition" is one of the parameters,in which there is a field named "m_control",it's condition control.
As far as I know,it has some potential values,such as "A","B",and "C".Is there anybody knows the meanning of them?
Thanks.
Edited by: Jerry cui on May 20, 2010 8:20 AM

hi,
This field Indicates whether the prices or values in a condition are fixed or whether they have been changed and, if so, in what way. For example the indicator shows, for example, if the prices generated by a condition have been changed manually during processing.
A     Adjust for quantity variance
B     Free
C     Changed manually
D     Fixed
E     Condition value and basis fixed
F     Condition value fixed (billed items)
G     Condition basis fixed
H     Condition value fixed (cost price)
This field is same as the R/3 field KONV-KSTEU.
Thanks and Regards
shanto aloor

Similar Messages

Hi! Anybody knows the meaning of the "ornament" feature in Logic software?

Hi! Anybody knows the meaning of the "ornament" feature in Logic software?

They're a bit odd....
An ornament is just a visual frame in the Environment, that does nothing except, well...be there.
I've seen some people use them in complex Environment setups to act as a border for a group of buttons for example, so it acts like one of those little plastic boxes that you puts knobs and switches onto, to make them look better.
That's about it.

Is there anybody knows the designed logic in report RHAUTUPD_NEW?

Hi, expertes,we met a problem has somthing with SAP standard report RHAUTUPD_NEW,
is there anybody knows the designed auhtorization profile delete/add logic?
Thanks in advance.
Jerry.

I don't understand the problem. Please post the complete screenshot. And possibly the outline view.

Is there anybody know the bandwidth of OSC in 15530.

As title: I have been asked by customer. And I did a show interface wave1/0 <--OSC card. and the outpurt is as below:
Wave1/0 is up, line protocol is up
Patched Interface(s) : Oscfilter0/0
Channel: 0 Frequency: 191.9 Thz Wavelength: 1562.23 nm
Signal quality : Good
Laser safety control : Off
Osc physical port : Yes
Wavelength capable for inband management: No
Threshold monitored for: None
CDL HEC error count: 3
Code violation and running disparity error count( 8b10b cvrd): 214
Last clearing of "show interface" counters never
Hardware is OSC_phy_port
Interface is unnumbered. Using address of Loopback0 (10.32.10.33)
MTU 1492 bytes, BW 10000000 Kbit, DLY 0 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SNAP, loopback not set
Last input 00:00:00, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
5 minute input rate 2000 bits/sec, 2 packets/sec
5 minute output rate 3000 bits/sec, 2 packets/sec
3704817 packets input, 364542217 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicast)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
3863706 packets output, 540967902 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
It indicate that the bandwidth is 10G..is it possible? or is there anyone know the answer?
Thanks,
Justin Fu

Thanks....
I found there is a doc said, the clocking of OSC is 1.25Gbps but it uses 2Mbps for Management....thanks for your answer for the advanced clarification.

What is the mean of condition index in pricing condition

hi
my question is what is the mean of conditon index in pricing condition type what is the use of it give me ascenario.

hi nag
A customer-defined list of conditions that allows quicker access to condition records or a group of condition records.
<a href="https://forums.sdn.sap.com/click.jspa?searchID=4774296&messageID=3962335">condition index</a>
Condition Index can be created for particular condition type to maintain condition record. The condition index along with the condition update field in condition type (T.Code: V/06) restricts the usage of condition type for limited sales orders, condition base value or condition value.
Features of condition Index:
When checked this specifies whether the system updates one or more condition indices when maintaining condition records.
This makes it possible to list or maintain condition records independently of condition type and condition table
Message was edited by:
Prashanth Goud

Is anybody out there who knows the steps to set up Logic Express? with an Alesis iO|26 interface

Is anybody out there who knows the steps to set up Logic Express 9 (scores) with an Alesis iO|26 interface to input notes by playing
an electric guitar? Thank you for your time and patience.
W.W.

And i fount this
PETERSON SONUUS-G2M MIDI-KONVERTER
ok this one could sendout your guitar sound as a MIDI data but only monophone.
Thats what i see as a big computation problem ( when you play your simple C7 there are
at least 10 important parameter that describe your C7 chord; but if you play monophone
theese small boxes can convert it).
Have you tried anny MIDI guitar?
I saw some "usb" guitars transmiting midi signal into
software synth on some computer.
http://www.roland.com/products/en/GI-20/
This one?

Anybody know the maximum channel, concurrent connection limit

Anybody know the maximum channel that can be set and the maximum concurrent connection that listener can support for WebSphere 6.0 Solaris.
One more question, please correct if I'm wrong; in order to set above value, I have to modify qm.ini as below:
TCP:
Port=1414
KeepAlive=YES
ListenerBacklog=800 --------> for maximum concurrent connection that listener supports
Channels:
MaxChannels=1000 ----------> for maximum channel for QManager
MaxActiveChannels=1000
Every suggestions would be appreciated.

Not really sure what you mean by "half-closing" and the question you're asking. Can you clarify?

Does anybody know the error code 11 while updating to ios 4.3.3.? thx

does anybody know the error code 11 while updating to ios 4.3.3. on an ipad1? thx

but my hard drive is still lot of spaces...still keep on trying to update...

Does anybody know the exact date when iOS 6 will be released?

Does anybody know the exact date when iOS 6 will be released? I know it will be coming out in the Fall, but I was wondering if anybody knew the exact date.

no one but apple knows for sure, and I'm willing to bet at this point in time all they have is a target date (if the software package was done it'd be released)
Bear in mind also, the first 48-72 hours after the software's release it's often quite challenging to get the update or it takes a lot of time because you're one of millions that are trying to get on the servers. So release date and available/accessible date can be separated by a bit.

My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

I had this problem about 2 months ago and, as others have suggested in this thread, eventually traed it backed to some stills I had scanned and brought into the project. Accidentally I had changed the scanner settings, with the result that a couple of skills were well beyond 1980 x 1020 pixels. I resampled the stills and everything was fine again. Hope this might help.

I want to talk to an actual person anybody know the number?

I want to talk to an actual person anybody know the number?

Here is one for activation problems, etc.
http://www.adobe.com/support/download-install/supportinfo/
Can we help you here in the forum?

Anybody know the name of the little rubber plug designed to keep light leak from entering eyepiece

anybody know the name of the little rubber plug designed to keep light leak from entering eyepiece. It is usually found attached to the strap supplied with EOS cameras. The larger eyepiece can be removed and the smaller rubber plug is inserted into the view hole. During long exposures, it prevents light from leaking in via the eyepiece area

Uh, clever name. lol. I've attempted to order one various times fromB&H and always end up with the standard eyepiece. Talked with customer service but they didn't seem to know what I was talking about. I wish canon would make an eyepiece with an open closed switch. I would buy that. Thanks for your help Scotty

Does anybody know the app cleaner

does anybody know the app cleaner???
is it good?? my macbook is getting very slow

I doubt that AppCleaner is going to speed up your Mac - unless you're short on hard drive space. Some companies have uninstall instructions or even apps on their websites for uninstalling their software. Use these instructions/apps if at all possible.
I've used AppCleaner a couple of times just to get rid of as much auxiliary junk as I can... but my use of it is limited only to those apps which I know haven't made any system modifications.
Be warned - without instructions/apps for uninstalling is the best method of uninstalling applications. Use AppCleaner only as a last resort.
See thomas_r's -> How to uninstall software.
Good luck,
Clinton

Does anybody know the terminal instruction to remove the shadow from screen grab images

Does anybody know the terminal instruction to remove the shadow from screen grab images?
I saw it somewhere on some site ages ago
(I like to align images together and take another screen grab without the darn shadow and without opening another app)

I found this:
defaults write com.apple.screencapture disable-shadow -bool true && killall SystemUIServer
but this soesn't seem to work
and this
To get rid of the shadow and only capture the window, enter this line of code in Terminal:
defaults write com.apple.screencapture disable-shadow -bool true
Then to implement the change, enter:
killall SystemUIServer
To revert the modification and restore shadows, enter:
defaults write com.apple.screencapture disable-shadow -bool false
doesn't work either in Mountain Lion

Macbook Air failed wifi connection - Does anybody know the solution?

Macbook Air has been connecting to Wi-Fi network without issue for almost 2 years.
Haven't been able to find a solution to 'failed Wi-Fi connection' so far.
Wi-Fi is turned on but is not connected to a network.
Wi-Fi Settings Failed.
Have tried trashing:
Library/Preferences/SystemConfiguration/com.apple.network.eapolclient.configurat ion.plist
Library/Preferences/SystemConfiguration/com.apple.network.identification.plist
Networkintefaces.plist
And restart, but no change.
Mac OS X Version 10.7.5
1.6GHz Intel Core i5
Does anybody know the solution?

Had restarted the router a few times to no avail.
Checked out the vendor's website, but wasn't able to find anything of use, -it was limited options wise.
Nothing in the OS X recommendations for Wi-Fi settings jumped out me.
I wasn't able to experiment with the band/channel settings.
I ended up buying a USB/Ethernet adaptor so I could at least have access to the net (5 days ago), -which didn't change the Wi-Fi issue...
However, after a couple of days without use, I've woken the machine and noticed the Wi-Fi signal at full strength. The network is detected and connected!
Problem solved ...But how?

Is there anybody know the meaning of Condition control in pricing?

Similar Messages

Maybe you are looking for