IS THERE ANYBODY WHO CAN TAKE IPHONE FROM TURKEY???
I m writing from Türkiye, and I wonder that is there anybody who enable to buy iphone from Turkey in last 2 weeks, because I can not find any place to buy this mobile phone. I have heard some news paper about Apple lost label law case in Turkey. Is it true or not? If there is anybody who have information about this issue can you inform me also.
Merhaba,
Your question may have been answered in another thread:
http://discussions.apple.com/thread.jspa?messageID=10665040
Similar Messages
-
I´ve so many privat things on I tunes like pictures, music etc.and i won´t loose them. is there anybody who can help me to save my private things and help me to solve teh problem
Thanks you for help greetings from austriaI just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck! -
I CANNOT ACTIVATE MY ILLUSTRATOR AFTER FIXING MY COMPUTER. IT SAIS THAT I AM NOT CONNECTED TO INTERNET BUT I AM. IS THERE ANYBODY WHO CAN HELP.
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
hi, i got my ipad 3 this afternoon, i created my account. When i'm about to install my fb, suddenly my ipad shutdown . Since 3 hours now, i can open it. Is there anybody who can help me what to do? The batter was fully charged. Thanks you
Try a Reset. Power and Home Press For 10 Seconds
-
Is there anybody who can solve this
I have seen so many query related to this on this forum, But i have not seen single satisfactory answer for the same.
This is really disappointing. Despite of so many experts are there this is remained unsolved.
Let me try once again, This is Printing problem in D2k Reports, Where I am using 150 column report, It works fine on 98,NT but i try the same from 2000 or XP platform it doesn't comes properly. Almost 80-90 character print in one line and rest goes in next line.
Thanks
ShitalDear Sir,
Of course i responsible to solve my problem, but if i am not able to solve than only i forward on this forum and if nobody able to solve than who is responsible??
Any way, here i am puting some info.
Mode : Client/Server
reports-version : 6.0.8.26.0
Desired output-format : Character mode
Pagesize : In report 8.5-11(W-H), In PRT file width is 150 defined.
The report works fine on Win98 and create problem on 2K and XP.
Thanks
Vishal -
Is There Anybody Who Can Play Movie !!!
hi,
i can display image files using read_image_file()
but for movies what can i do?
isn't there any basic built-in?
thanks a lot for any reply..Helen,
I remember that I had avi's working in Forms6i client/server. However you wont be able to use this on teh Web. Here I would simply call a URL accessing the movie to run in a Browser window.
frank -
Hey. I can not sync my iphone with my macbook air. It will not download my purchased music. Writes that there was an unknown error (-42408). Is there anyone who can help me.
Sincerely jimmiHey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
i downloaded the latest update ios 7.0.4 and update my iphone 5, but to my surprise i couldnt locate the downloaded file on itunes and i've also checked my itunes folder, still cant see the file. pls anybody who can help.
The downloaded file is probably stored at C:\Users\<User>\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates. In general it is probably best to "download and install" updates than download and then install later. Note that you cannot revert to the older firmware if you don't like the update, even if you have the old .ipsw files.
tt2 -
I have a problem, i can't change my lockscreen wallpaper? Doesnt work...is there anyone who can help me regarding this problem? Thx
To help, we need more detailed information.
--What steps are you trying?
--What does the device tell you (any pop-ups or messages)?
--Are you able to change the Home screen wallpaper, or is that affected too?
--Are you the phone's owner/administrator, or is this a device used for work (assigned/administered by IT staff, possible on an Exchange server)?
--Have you jailbroken the device? -
Anybody who can help me? I really need your help
I've tried to execute J2ee tutorial examples.
I don't know why this sample didn't execute...I've already finished to set up J2EE and enviornment variables.
I was trying this part from j2ee tutorial titled as "Packing Web modules".
Whenever I type "asant create-war" to make web modules in command window. I always got error.
Packaging Web Modules(From J2ee tutorial for your information)
A web module must be packaged into a WAR in certain deployment scenarios and whenever you want to distribute the web module. You package a web module into a WAR using the Application Server deploytool utility, by executing the jar command in a directory laid out in the format of a web module, or by using the asant utility. This tutorial allows you to use use either the first or the third approach. To build the hello1 application, follow these steps:
In a terminal window, go to <INSTALL>/j2eetutorial14/examples/web/hello1/.
Run asant build. This target will spawn any necessary compilations and will copy files to the <INSTALL>/j2eetutorial14/examples/web/hello1/build/ directory.
To package the application into a WAR named hello1.war using asant, use the following command:
asant create-war
This command uses web.xml and sun-web.xml files in the <INSTALL>/j2eetutorial14/examples/web/hello1 directory.
To learn how to configure this web application, package the application using deploytool by following these steps:
Start deploytool.
Create a web application called hello1 by running the New Web Component wizard. Select FileNewWeb Component.
In the New Web Component wizard:
Select the Create New Stand-Alone WAR Module radio button.
In the WAR File field, enter <INSTALL>/j2eetutorial14/examples/web/hello1/hello1.war. The WAR Display Name field will show hello1.
In the Context Root field, enter /hello1.
Click Edit Contents to add the content files.
In the Edit Contents dialog box, navigate to <INSTALL>/j2eetutorial14/examples/web/hello1/build/. Select duke.waving.gif, index.jsp, and response.jsp and click Add. Click OK.
Click Next.
Select the No Component radio button and click Next.
Click Finish.
Select FileSave.
A sample hello1.war is provided in <INSTALL>/j2eetutorial14/examples/web/provided-wars/. To open this WAR with deploytool, follow these steps:
Select FileOpen.
Navigate to the provided-wars directory.
Select the WAR.
Click Open Module.
I guess this step is for checking my system about setup information. I not sure how to change it.
the result from execution of ansnt command in dos
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>asant create- war Buildfile: build.xml
j2ee-home-test:
BUILD FAILED D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\common\targets.xml:10: T he j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/c ommon/build.properties.
Set the j2ee.home property to the location of your Application Server installati on.
On Windows, you must escape any backslashes in the j2ee.home property with anoth er backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to:
Total time: 0 seconds
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>
I've installed J2ee sdk in C:\Sun\AppServer
PATH: %J2EE_HOME%\bin;%JAVA_HOME%\bin;
CLASSPATH: %J2EE_HOME%\lib\j2ee.jar;C:\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar
J2EE_HOME: C:\Sun\AppServer
JAVA_HOME: C:\Sun\AppServer\jdk
I've installed J2ee with administration 4848, HTTP: 8089 HTTP: 8090
I guess this could refer the target.xml and build.properties. So, I've tried after changing some value, which is fit for my setup.
but, still doesn't work.
targets.xml
<path id="classpath">
<fileset dir="${j2ee.home}/lib">
<include name="j2ee.jar"/>
</fileset>
</path>
<target name="j2ee-home-test" >
<!-- Test if j2ee.home is set properly by looking for j2ee.jar -->
<available file="${j2ee.home}/lib/j2ee.jar" type="file" property="j2ee.jar.present" />
<fail unless="j2ee.jar.present">
The j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/common/build.properties.
Set the j2ee.home property to the location of your Application Server installation.
On Windows, you must escape any backslashes in the j2ee.home property with another backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to: ${j2ee.home}
</fail>
</target>
<target name="clean" >
<delete dir="${build}" />
<delete dir="${dist}" />
<delete dir="${assemble}" />
<delete file="${ear.name}" />
<delete file="${war.name}" />
<delete file="${war.file}" />
<delete file="${client.jar.name}" />
</target>
<path id="db.classpath">
<fileset dir="${db.root}/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="create-db_common"
depends="init,start-db,delete-db"
description="Create database tables and populate database." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="abort" >
<transaction src="${sql.script}"/>
</sql>
</target>
<target name="delete-db"
description="Deletes the database tables." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="continue" >
<transaction src="${delete.sql.script}"/>
</sql>
</target>
<target name="ping-db"
description="Checks to see if Derby is running." >
<java classname="org.apache.derby.drda.NetworkServerControl"
fork="yes"
resultproperty="db.ping.result">
<jvmarg line="${db.jvmargs}" />
<arg line="ping" />
<classpath refid="db.classpath" />
</java>
<condition property="db.running">
<equals arg1="${db.ping.result}" arg2="0" />
</condition>
</target>
<target name="start-db"
unless="db.running"
description="Starts the Derby databse server."
depends="ping-db">
<sun-appserv-admin
explicitcommand="start-database" />
</target>
<target name="stop-db"
description="Stops the Derby database server."
depends="ping-db"
if="db.running">
<sun-appserv-admin
explicitcommand="stop-database" />
</target>
<target name="admin_command_common">
<echo message="Doing admin task ${admin.command}"/>
<sun-appserv-admin
command="${admin.command}"
user="${admin.user}"
passwordfile="${admin.password.file}"
host="${admin.host}"
port="${admin.port}"
asinstalldir="${j2ee.home}" />
</target>
<target name="create-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="create-jdbc-resource
--connectionpoolid ${conpool.name} ${jdbc.resource.name}" />
</antcall>
</target>
<target name="delete-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="delete-jdbc-resource ${jdbc.resource.name}" />
</antcall>
</target>
<target name="deploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="deploy ${war.file}" />
</antcall>
</target>
<target name="undeploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="undeploy ${example}" />
</antcall>
</target>
<property environment="env" />
<target name="listprops"
description="Displays values of some of the properties of this build file">
<property file="../../common/admin-password.txt" />
<echo message="Path information" />
<echo message="j2ee.home = ${j2ee.home}" />
<echo message="j2ee.tutorial.home = ${j2ee.tutorial.home}" />
<echo message="env.Path = ${env.Path}" />
<echo message="env.PATH = ${env.PATH}" />
<echo message="" />
<echo message="Classpath information" />
<echo message="classpath = ${env.CLASSPATH}" />
<echo message="" />
<echo message="Admin information" />
<echo message="admin.password = ${AS_ADMIN_PASSWORD}" />
<echo message="admin.password.file = ${admin.password.file}" />
<echo message="admin.host = ${admin.host}" />
<echo message="admin.user = ${admin.user}" />
<echo message="admin.port = ${admin.port}" />
<echo message="https.port = ${https.port}" />
<echo message="" />
<echo message="Domain information" />
<echo message="domain.resources = ${domain.resources}" />
<echo message="domain.resources.port = ${domain.resources.port}" />
<echo message="" />
<echo message="Database information" />
<echo message="db.root = ${db.root}" />
<echo message="db.driver = ${db.driver}" />
<echo message="db.host = ${db.host}" />
<echo message="db.port = ${db.port}" />
<echo message="db.sid = ${db.sid}" />
<echo message="db.url = ${db.url}" />
<echo message="db.user = ${db.user}" />
<echo message="db.pwd = ${db.pwd}" />
<echo message="url.prop = ${url.prop}" />
<echo message="ds.class = ${ds.class}" />
<echo message="db.jvmargs = ${db.jvmargs}" />
</target>
build.properties ����
j2ee.home=
j2ee.tutorial.home=
asinstall.dir=${j2ee.home}
admin.password.file=${j2ee.tutorial.home}/examples/common/admin-password.txt
admin.host=localhost
admin.user=admin
admin.port=4848
https.port=8181
domain.resources="domain.resources"
domain.resources.port=8080
# Derby configuration settings
db.delimiter=;
db.root=${j2ee.home}/derby
db.driver=org.apache.derby.jdbc.ClientDriver
db.datasource=org.apache.derby.jdbc.ClientDataSource
db.host=localhost
db.port=1527
db.sid=sun-appserv-samples
db.url=jdbc:derby://${db.host}:${db.port}/${db.sid};create=true;
db.user=APP
db.pwd=APP
db.jvmargs=-ms16m -mx32m
Is there anyone who can tell me how to change it? I really need your help....
Thank you in advance.ok,
First of all make sure your tutorial folder is installed from the root:
C:\javaeetutorial5
or
D:\javaeetutorial5
it makes things so simple.
Secondly:
set your jee tutorial home
JAVAEE.TUTORIAL.HOME =
C:/javaeetutorial5
Thirdly: check in:
C:\javaeetutorial5\examples\bp-project
make a copy of the build.properties.sample save it as build.propropties, as a property file,
edit the properties file as in:
build.properties
As follows:
# uncomment the property javaee.home, and add the path
# to your GlassFish Java EE 5 SDK installation
javaee.home=c:/Sun/SDK
javaee.tutorial.home=c:/javaeetutorial5
# Uncomment the property j2ee.server.username,
# and replace the administrator username of the app-server
javaee.server.username=admin
# Uncomment the property j2ee.server.passwordfile,
# and replace the following line to point to a file that
# contains the admin password for your app-server.
# The file should contain the password in the following line:
AS_ADMIN_PASSWORD=admin1234and so fourth. Some of the settings as the application server name is all done for you
and then test it again.
Take care of editing the property file. It can give you headache.
Note also that this is for application server 9.1 - JEE5.
eve -
Is there anybody who has interface NI DAQ card with Pressure System Scanners
I am trying to acquire data from Pressure System's sensor ESP 16 BP with NI DAQ card PCI-6221.
Is there anybody who has perform this job.
Thanks,
Surender Kumar
Regards,
Balaji DPHello Surender.
Thank you for contacting National Instruments.
Although I have never used that particular pressure sensor, the setup for measuring a pressure sensor is usually the same. Since the sensor probably outputs a voltage that is correlated with the amount of pressure that the sensor is detecting, we can configure a voltage task inside of Measurement and Automation Explorer and then port that into LabVIEW. A great video tutorial of a DAQmx task being created and then transferred into LabVIEW is available at:
Creating a Task in NI-DAQmx and Using it in LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/5374#toc2
Also, there is a great site that contains general information on pressure sensors at:
Measuring Pressure with Pressure Sensors
http://zone.ni.com/devzone/cda/tut/p/id/3639
Let me know if this information answers your questions. If you have a more specific question, please let us know and we would be happy to help you.
Happy Holidays!
Brian F
Applications Engineer
National Instruments -
How do I make Internet commerce with the MacBook Pro in the program iWeb. I've made the website and would like to ad a site where it possible to commerce with debit cards. Is there anyone who can help?
Some info on this and the following two pages...
http://www.iwebformusicians.com/Internet-Music-Sell-Distribute/Website-Buy-Page. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
Hi are there some who can help i am trying to update my programs in app store
hi are there some who can help i am trying to update garageband ,iphoto and iMovie on my iMac, but it´s not my apple id it will use to the update, so i dont now the email and the password for the email used, and i cant change it to my apple id
my problem started after i updated to maverick
i hope there are someone who can help ???hi are there some who can help i am trying to update garageband ,iphoto and iMovie on my iMac, but it´s not my apple id it will use to the update, so i dont now the email and the password for the email used, and i cant change it to my apple id
my problem started after i updated to maverick
i hope there are someone who can help ??? -
Hello everyone!
I've a problem during installation of Itunes 10.7 on Window 7 x64. I had installed v11 but i don't like it, so i've uninstalled correctly this version and i have downloaded v10.7
The message, translated in english, is:
UNKNOWN \ Components \ ... \ 2B0163E6D0340BE2758E9BEDD8.
Make sure you have sufficient access to that key, or contact your support staff.
I don't know how to do...I don't want to format my pc
I have already tried to erase all the "apple" folders on directory C:\, but nothing to do...
Is there anybody that can help a poor italian boy, please?
Thanks a lot,
TeoThx Polydorus!
this evening i'll try and i'll tell you if it works!
Teo -
I have installed ios7 on my iPad 4. After installation it asked me a pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6. I asked Apple store & tech said to format it but I will lose all the data..!
Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks
Maybe you are looking for
-
Unable to place call on calls on hold - SIP Trunk from CUCM to CUBE and from CUBE to ISTP
Hi Cisco Community, I have a SIP Trunk setup between the CUCM and CUBE and another SIP Dial Peers from the CUBE to the ITSP. All incoming/outgoing calls, DTMF-Relay works well except one thing which is the ability to hold the call. On the SIP Trunk f
-
Mavericks 10.9.5 and Notes.app crashes
I give up - notes application after a complete reinstall - of mavericks with no lotus notes installed, the application notes - crashes. ** Deleted container, deleted all preferences, plist, saved application states, ** this is the most annoying featu
-
IWeb '09 / Mobileme Gallery Widget / No Albums or Movies / Snow Leopard
This is my first time trying to use the Mobileme Gallery Widget in iWeb '09 and all I can get it to do is tell me "No Albums or Movies". I have non password / no hidden galleries published via iPhoto '09 and iMovie '09. I even tried publishing via me
-
Query GL Account Segment Qualifier
i would like to query the gl account code together with the segment qualifiers, some thing like select account_code, description, allow_budgeting, allow_posting, account_type, third_praty_control_account, reconcile from .... what are the tables tha
-
New version crashes my comp!
Itunes NEW VERSION gives me bluescreens and crashed my computer now.. WHY?