Is there anyone having problem connecting to internet since last AppleTV update (4.4 (3140))? All my other apple devices work well with my internet connection except appleTV.
I am able to select my Wi-Fi network, but it does not accept my password.
This helped me out.
http://support.apple.com/kb/HT1595
Similar Messages
-
my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.
Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
ipod problems
My ipod sounds as if it has interference when on docking station....3 other apple devices work with no such problems, i.e a nano. a classic and 2 separate iphones so the problem doesn't seem to be the docking station...I have been given 2 reolacement ipods and the sound persists....it is obviously the connection.....as before downloading any data on the new ipod I docked it and the noise was present ....mairiskye....- Is it a 4G iPod? That model sometimes mates poorly with dock because the configuration of the iPod by the dock connector is different that other devices. Thus, make sure it is fulld/seated in the dock.
- Have you brought the iPod and dock to the Genius at the an Apple store. -
I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer. How can I get my new Imac to read these dvd's? Will the mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with the Mac? Do I need anything else to get the dvd material onto my mac? Thanks!!
No DV port in camcorder. Just a yellow AV port/hole. I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's. Can I use this with a Mac? Could I connect a dvd player to the Canopus and transfer the disks onto my Mac? Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way? Thanks again!
-
My ipod touch just keeps searching for a wi-fi connection in my house where it use to connect automatically. My other apple devices still are connecting so not the wi-fi. I have reset to original settings, turned off-on-off-on... nothing seems to work. Does anyone have any ideas?
Thanks!Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. (I think you did this)
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Is there anyone having problem with Clone Stamp in CS4?
Good Morning, I am using Photoshop CS4 Extended with Windows Vista Ultimate 64 bit. My computer is a Dell XPS 430, WITH 8GB of ram, 1.5TB of disk space, ATI Radean HD 4800 Series adapter with 512MB memory. When I bring up an image in Photoshop and click on Clone stamp I get the error message "could not use the clone stamp because of a program error." I can still use Clone Stamp, but with some wied reults. Sometime the middle of the brush turns bright white and do nothing. Again it will clone the item clicked on, but would move the spot being cloned. Other times when the brush is move from the spot being cloned it will clone other area without cliking on them.
I have uninstalled and reinstalled Photoshop 4 times. I have created a new account with administrative rights, which I unistalled and reinstalled Photoshop. Two of the times that I uninstalled Photoshop I also used the Photoshop script to make sure all of Photoshop were uninstalled. I have also cleaned the register of Photoshop before reinstalling Photoshop. Another item used to make sure there was no error with Vista was Windows cleanup installed tool.
Yesterday I checked my laptop and I am getting the same results as my PC. The most recent thing that has been updated on both the PC and Laptop was Windows updates and Camera Ram 5.4. Attached is a copy of a wierd result using clone tool. I just clicked on the image and the orange spot appeared. Is there anyone else who is having similar problems with Clone Stamp?Have you applied the Photoshop 11.0.1 Patch?
Have you updated the video drivers?
If that doesn't help, try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.) -
Anyone having problems connecting their Hands Free Blue Tooth in their car?
My new 4s will not connect to the hands free BT in my 2010 Infiniti G37. My old 3Gs had no problem connecting. When I try to hook my new phone up the car doesn't even recognize an available phone.
How do you figure that?
Companies are turning them off.
your cell phone provider would prefer you use a wifi hotspot than their cellular network
True, but "Borders Books" and other private businesses are not there to help cell phone providers. Cell phone providers would prefer I use the phone in my hotel room also, but no one does that either.
towers which no one wants in their area.
Everyone I know wants more cell towers.
You will see in the coming years, there will be a very big push towards Wifi all over the country.
Who is pushing? I get the web on my iPhone. With 4G the speed is the same as Wifi. -
For Anyone Having Problems Connecting Ipod to Itunes/My Computer
I have just spent all day trying to get my new Ipod Nano sync'd.
Just attempted unplugging my Printer and other devices so that only my mouse was left. I plugged my Ipod in and it worked. So basically I don't think it likes my printer being plugged in at the same time as it.
Worth a go for anyone pulling their hair out like I was."She also told me that if that didn't work, that I should get a PCI card with USB 2.0. They have a list of recommended brands (tend to work with iPods?) here, so I ran to a local store and picked up a SIIG brand card (this exact model), and it works great."
So, because of a fault of Apple, YOU had to buy more stuff for your computer to make THEIR product work? Id see about trying to get Apple to foot the bill of that. I would have told the tech support gal, to tell her superiors to stick their Nano where it wont play again. Why is Apple not aknowledging this problem? Ive been loyal to Ipods since the old shuffle hit the shelves. It served me well until this year when it fell outta my pocket and sat through a weekend of ice and snow on our driveway. I have half a mind to return this bugged up mess and ebay me a new (well old) shuffle. This is rediculas! At least I got some songs on it once, its not completely useless...yet... I am NOT buying new USB ports for my computer when every single USB device I have works just darn fine in the ones I have on my computer now. -
iPad trouble with printing on hp D7460. All other apple devices work with it wifi.
There's a list of printers that support AirPrint, the native mechanism for printing from iOS, here:
http://support.apple.com/kb/HT4356
If your printer doesn't support AirPrint, HP has app that enables printing to some of their other wireless printers. Third-party printing apps such as PrintCentral are also available. All such apps have limitations, so check them out thoroughly before you pay for any such app.
You can also route the printing through your computer. If you have a Mac, Printopia would be worth a look. Fingerprint is another option that is available for both Mac OS X and Windows system. You could also consider an AirPrint-capable print server. Lantronix makes a couple of models, including one that supports a USB printer:
http://www.lantronix.com/it-management/xprintserver/xprintserver-t2.html
Regards. -
Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?
You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked. -
I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
Thank you!Alright it didn't solve it. Any other suggestions?
I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
There was a Problem connecting to the...: Apple Support Communities -
There was a problem connecting to the internet. it show me it connecting
there was a problem connecting to the internet, please try againprint show me it connection
Hello @vernell1,
Welcome to the HP forums.
I understand that your Photosmart Premium is not able to connect to the internet.
I would like to help.
Sometimes simply turning the printer off then back on will clear the problem.
Chances are you have already done this.
I would try setting a manual DNS.
The following post by happytohelp01 has instructions to set the manual DNS.
It describes a Photosmart 7510 but the steps should be very similar.
Efax 7510 still won't work after turning off/on ePrint several times
If you encounter any problems along the way, please let me know.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping! -
I upgraded to iOS 7 to my ipad using iTunes. When signing with the Apple ID I get an error reading "There was a problem connecting to the server" anyone who knows what to do next
Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
https://appleid.apple.com
if you can sign in there, try to sign in to itunes on your computer. -
hi i am having problems connecting to internet using ethernet,in the network diagnostics i get all green,except network settings which is orange.i am running mountain lion on intel imac
hi have done as you said plug ethernet straight into computer and into back of router,and worked straight off,i had the the powerline on extention when imac was up stairs,when i had computer down stairs it still would not work with powerlines even on main wall sockets,so they are getting binned,looks like i will have to move router upstairs,just wondering if i got extention wire from back of openreach box to router upstairs```,would it be ok,,the openreach box is next to my only phone socket in house,which is in back kitchen..any advice would be great,
-
Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine). Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message. Only fix is resetting TC.
The TC is the wifi base station, also have AirportExpress on the network, both of which work fine. The TC has an external disc connected as well, which is also visible in the sidebar but also cannot be connected to. Several MB computers use the network, all of which either can or cannot connect to the TC disc depending on when it is acting up.
Any ideas other than clicking "connect as" or powering down the network every time?Read up how to install 5.6 utility into ML.. it is pretty easy.
I downloaded 5.6
http://support.apple.com/kb/DL1482
Download unpkg
http://www.timdoug.com/unpkg/
Open the dmg to get the pkg.. drag it onto unpkg.. and it will create a directory under desktop with all the files.. drag the application to the utility directory.. or just run it direct.
Google if you want more explicit instructions.
Much easier with a real tool instead of a toy.
Hold the option key when you select firmware update.. all the old ones will appear.
But this will not work on newer Gen4.. only on every other model and early Gen4. .I do not know when they turned the corner and started this only 7.6 nonsense.
Maybe you are looking for
-
The server responded with an error (iCal)
I keep getting this error message when I open iCal. The request for account "Gmail" failed. The server responded with "HTTP/1.1 401 Unauthorized" to operation CalDAVAccountRefreshQueueableOperation. In reviewing the other topics similar to this, they
-
Setting the counter output mastertimebase divider?
Hello I want to output single short pulses with varying pauses. My MuFu DAQ card has 20 MHz master clock rate and 24 bit counter (Good ol'6052E). When I try to output 1 µs with a pause duration of more than 839 ms, I get an error due to mismatch of c
-
Hi Experts, Can someone provide me the step by step details of importing the Taxonomy data? Actually i am looking for some Material where i can have the Hands On experience of maintaing the Taxonomy Table starting from Creating fields and also with t
-
Duplicate line added with a different billing plan
Hi, when i save a order number then only 1 entry for billing plan is there in the FPLTC table. but when i save the INVOICE there a duplicate entry is added with different bIlling plan in the FPLTC table. can somebody tell me why this is happening. Is
-
Transfer data from my Mackbook to IBM computer
How do I transfer my data files from a Mackbook to a new IBM computer