Is there anyone who has wifi issues with iOS 5.01?

Wifi is not connecting properly with its 5.01 ? Is there a solution?

Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
 Cheers, Tom

Similar Messages

  • Is there anyone who has good experience with the E...

    I'm a current owner of E72 with a multitude of problems which i'm tired out talking about. Anyway, I'm thinking of upgrading to the E6, because of it's price in my country and also because i'm familiar with nokia phones' symbian platforms. Initially i did not want to buy any nokia products anymore, but I want to give it another go because of the mentioned reasons and also due to my E72 frustrating me every other day. In addition, my few other options are android touchphones and i really dislike full fleged touchphones, not to mention their battery life. My other option is the Blackberry which has no front facing camera which i need making video calls, so I'm really looking at the E6. I've read so many horror stories in this thread that i'm really worried that i'll get a lemon, so I want to read some positive stories or some judicious pros and cons, before taking the plunge! Please help thank you!
    Solved!
    Go to Solution.

    I have owned my E6 for over 3 months and after the weekends new firmware (025) the phone now is almost perfect.
    The audio quality for music is good and voice calls is the best that you can find, even in noizy environments.
    Battery endurance is very good now, perhaps 80-100 hours in moderate use.
    Also the former problem with backlight is now corrected by Nokia.
    After the firmware the phone is very fast, I mean this cincerely. Also it seems that connectivity over 3G or WLAN is 100% perfect now.
    The vibration is perhaps a little weak for men, but woman can feel it...I tested it various ways.... Nokia will solve this matter also.
    Forgotten things, that is really good is removable battery, hot-swoppable memory card and the the feeling of handling the phone.
    Not a single scratch or dust problem after 3 months...
    The RAM-memory seems to be enough for everything I am doing.
    The graphic and the 1GB ROM-memory certainly makes the Nokia E6 competent.
    The qwerty is really amazing and the screen also, after experimenting with font magnifier (using 119%) and the size in the web browsers and of course the phone settings for font size have actually made this E6 excellent. It took me some time to be satisfied with the settings, but I am now more than happy with mine.
    As said, the program RemindMe is useful for light indicators for sms/mms, emails and calls. That solve that issue to me and even if Nokia built-in will be better in the next firmware I stil wouldn´t quit the remindMe.
    Finally, the camera is also more than good, the lack of autofocus doesn´t disturb me at all. I never take photos of small documents with the camera.
    I have to say, just buy it after this latest firmware, and then add those applications that you need for productivity. The applications I use you can see here below.
    I uninstalled the F-secure firewall/antivirus that caused some strange behaviors in early august, especially when I connected to a server with the built-in filebrowser (webdav).
    PS Mine have never restarted and I can´t remember a hang. DS
    Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

  • Anyone else having wifi issues with ios 5.0.1 update?

    i updated a few days ago and have had problems getting wifi connections since. i've read on a few forums that people have also had this problem. anyone on here having the same issue? i now have to be within 3 feet of a router to get even a weak signal. sort it out apple

    I have the same problem.
    When I update my 3GS to iOS 5.0.1.
    After that,I can't not find any wifi signal at the same place.
    But before update,there are at least three different signal i can find and use.

  • Is there anyone who has used Freescale's SimpleSUB.dll and DEMOJM board?

    Hello,
    I am trying to connect Frescale DEMOJM board over USB connection. I am adding SimpleUSB.dll to my visual instrument thorough .NET constructor node and giving an mscorlib class GUID to the GUID property, than calling OpenConnection method from an invoke node referencing the SimpleUSB reference. But there is no valid connection to the device as DeviceConnected parameter return "False". 
    I am using LabVIEW 8.6 trial, .NET Framework 3.5. So they are up to date I guess. Is there a limitation of these for using .NET dll? And also I can use the dll in Visual C# successfully.
    At first there was another problem using the .NET constructor node in LabVIEW because of Vista OS.  The vi was blocking when i added the node to the vi. I changed the "language & regional settings" to English(USA). The problem seemed to be solved. Can Vista's bug be still a problem?
    Is there anyone who  has used Freescale's SimpleUSB.dll and DEMOJM board with LabVIEW?
    I will be thankfull for your helps.
    Emre

    Hello Anna,
    Here is one of my poor vi trials.   I have also tried putting some conditionals in some other files but it didn't helped.
    http://rapidshare.com/files/176194859/EXTDLL1.rar.html
    Here is a link for the Freescale's DEMOJM board. It shows how to make a GUI for the board using SimpleUSB.dll & C#.  You can also download the dll from that web page and there is helpfull documentation for the dll.
    http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=USBJM_TRAINING&nodeId=016246fNrgVJ4Cx...
    I am trying to make the same thing with Labview instead of C#. But I am not familiar with the SW issues so am in trouble.
    Thanks,
    Emre

  • I cannot get decent reception on my 4s from Sprint.  I understand there is a known WiFi issue with the 4s as well as antenna issues.  Is this true and is it resoved in the 5 series?

    I cannot get decent reception on my 4s from Sprint.  I understand there is a known WiFi issue with the 4s as well as antenna issues.  Is this true and is it resoved in the 5 series?

    I am aware that Sprint has network issues. I have learned that Apple does have reception issues with the 4s.  The 5 series has more antenna area and a different protocol. I have owned at least 6 iPhones personally and over 30 as a company.  The 4s is junk. Apple's attitude toward customer service is much more of a problem than Sprint's network.  Apple sent me your non-answer to my questions instead of anything real. I asked about the iPhone, not about Sprint.

  • TS2755 I have an iphone 3gs. I recently got unlimited texting added to my att plan. I can attach images to anyone who has an iPhone with os 5 (imessaging)). Why can't I attach images to people who I text non-imessage?

    I have an iphone 3gs. I recently got unlimited texting added to my att plan. I can attach images to anyone who has an iPhone with os 5 (imessaging)). Why can't I attach images to people who I text non-imessage?

    Your carrier determines what you can send in a text message, Apple has no control over it as SMS and MMS are completely carrier-based

  • Has anyone had app update issues with iOS 8.1?

    I'm running iOS 8.1 on a iPhone 6+.  If I try to update an app from the app store without being logged in, it will hang the process and the update will fail.
    Previously, with my iPhone 4 and iOS 7.1.2 the app store would ask me to log in when an app update was attempted without being logged in.
    The work around until apple fixes this bug is to ensure you are logged in BEFORE attempting an app update.  An honest techie at the local apple store admitted this is a bug (one of many) in iOS 8.1.  Has anyone else had this issue with iOS 8.1

    Nope, I'm able to update an app in iOS 8.1, even if I'm not first logged into the iTunes & App Store in Settings.  It prompts me to update the app, then I sign in with my password.
    Do you have Touch ID enabled for App Store or not?

  • For Anyone who has Blackberry Connect WITH OTA Con...

    I've tried with an E61i, E90, and now E51, all with the latest firmware and latest Blackberry Connect software, and nothing I do on the device allows me to be able to do OTA sync of our corporate Exchange, (Outlook), Contacts. I only have the standard 3 options for sync in my Blackberry Connect client on my phone, Email Settings, Email Filters, and Calendar.
    For anyone who has this working, can you confirm whether or not there is a BES server side setting that must be enabled to allow this OTA Contact sync, and what it is? If this is the case I'm not sure our corporate BES admin will go for it, but I can at least stop pulling my hair out on the client side..
    Thanks,
    Jason

    Hi Rod,
    Thanks for the link. I did went there and had a look.
    First, as the article pointed out, there is a difference between Mac users and PC users. Mac users are Mac FANs, PC user are mostly just PC users. So if I look at the numbers, the number for Macs is less objective to me.
    Second, the data was collected on pre-Intel units, especially iBooks, which has been around how many years? more than 5 I believe, correct me if I am wrong. Any product having that kind of life span should have a nearly perfect quality. Apple just simply had much more time to correct defect than other PC manufaturers, so no mistery here.
    Third, Apple charges a premium price for its products, so it shoule choose the coponent vendors carefully and it owns its customers/fans a solid system. On the other hand, the other PC vendors are constantly going through fierce competition to lower their price, so it is inevitable to have some component vendors providing crapy parts, such as some LCD screens and keyboards from Dell.
    Finally, lets look at MB and MBP, if they are as good as old Macs, then we should see similar amount of people complaining about MB and MBP as iBook and similar, but is it the case?
    I very much want to be a member of the Mac world, especially now it uses one chip I worked on, but my shopping and reading experience told me otherwise - the MacBook is not ready, we need time to see if it lives up to the Apple name and it would be interesting what the next report from PC Magzine will look like...
    Being a PC user almost all my life till now, want to join the Mac club, but Apple is making it supper hard for me. Is it really too much to ask for a working new MacBook upon arrival?!

  • Why are there no answers to the wifi issues with iOS 7.0.4

    Why isn't Apple addressing the issues with wifi connectivity, or lack there of, with iOS 7.0.4? Everyone is complaining, but no one is answering. Don't tell me about turning on and off of wifi and router...been there. Come on apple...give us some help here. And why will my iPad 2 connect to Apple but absolutely no where else?

    Why isn't Apple addressing the issues with wifi connectivity, or lack there of, with iOS 7.0.4? Everyone is complaining, but no one is answering. Don't tell me about turning on and off of wifi and router...been there. Come on apple...give us some help here. And why will my iPad 2 connect to Apple but absolutely no where else?

  • Is there anyone who has a G3 who can read my floppy?

    I wrote a book in the mid-1990s and stored it on what was available at the time:  double density 3.5-inch floppies.  I would like to see if the data are retrievable and have read that G3 powerbooks can read these discs.  Is there anyone out there with a functioning G3 who can help me?  (I have purchased 3 different 3.5 inch floppy readers in past month and none of them can read the doubles density disks, although they read my 1.4MB disks ok.)  Or is anyone familiar with another product or solution other than the G3 that can help?

    As you have discovered, a USB floppy drive is not capable of reading the special 800K Macintosh format (on DSDD/2DD diskettes). The same is true for a PC floppy drive. The reason for this is that the 800K Macintosh format requires a drive with a variable speed.
    What you need is a pre-1998 Macintosh desktop or PowerBook with a built-in floppy drive. A Macintosh computer from approx. 1991 to 1997 will have a floppy drive that can handle both 800K and 1.44 MB (earlier models could read maximum 800K).
    Jan

  • Is anyone else having serious issues with iOS 5 on the 3Gs. My phone keep freezing up and it froze today for like 3 hours finally did a restore now it wont restore through my computer.

    This is driving me crazy!!!!!!!!!!

    I had major issues with the iPhone 4s battery, however it’s resolved.
    The tech who set the phone up at the Apple store did so with little training.
    if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
    Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
    turning of locator and the push notifications from facebook--they have a lot!

  • Ipad 3 still has wifi problems with ios 8.1 when bluetooth is turned on

    IOS 8 has created nothing but problems with my Ipad 3. None of the Apple Updates has fixed the problems. IOS 8.02 was almost no wifi until I realized that I could turn off the bluetooth and then I had fast Wifi again. The new IOS 8.1 improved this very little. I tried the bluetooth on and got half the speed I should. Turn The bluetooth off and I get normal speed on Wifi.
    Apple makes it next to impossible to report problems to them, so I will post complaint here and hope they review comments. So far everything else seems to be working other than the Wifi issue. Wish I could just go back to IOS 7.

    Ever since upgrading to IOS 8, including IOS 8.01, 8.02 and 8.1 I had the wellknown Wifi issue. wifi speeds dropping from 120mbps to about 2mbps @ 5ghz in within a minute after connecting to the wifinetwork. often i couldn't even surf at all. but the wifi signal was always strong. With every update i was hoping for a solution from Apple but it never came. Tried everything that can be found on the internet. Resetting the network settings. Disabling "wifi networking" under Settings > Privacy > Location Services > System Services. Reinstalling my Ipad from scratch Used different routers and different setups. Automatic ip's and fixed ip's and different dns servers just to be sure. Nothing worked. The only workaround is switching to a 2.4Ghz network. So i was doing some tests and found THE solution, but i don't like it all. One of the biggest changes in IOS 8 is the ability to use airplay without a network. by using a wifi connection in combination with bluetooth. And here lies the problem. I disconnected al my Airplaydevices from my network. Denon AV-amplifier AVR2113, Pioneer wireless speaker XW SMA3 and an airport express. Et voila... My Ipad is back to normal. fast... no very fast internet connection and stable as ****. Just like iOS 7 was. Working with it for a couple of hours now without any trouble at all. But do i connect one Airplay device to the network the wifi is not stable anymore and extremely slow again on my ipad air. My Macbook running mac os x mavericks doesn't have these issues, neither does my iphone 5S. and they are also on the same 5ghz network. So I can create and recreate the issue and create a work around... Apple please come with a solution that makes me able to use airplay an ipad (on ios8) on a 5ghz network! like in iOS 7!!!!

  • Anyone else experiencing disconnection issues with IOS 6.2.1 on the iPad 2

    Since the latest update my iPad radomly disconnects from the any wireless connection.  It worked perfectly before this update.  What gives?????  You fix one thing only to break something else.  Is there no one testing these updates before hand?  I'm just saying. Please get this fixed.  It's annoying have to reconnect when I'm in the middle of something......New update...>EPIC FAIL!!!!

    Try #5.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Is there ANYONE who has not had a problem with the 10.4.10 upgrade?

    Just bought Ilife and it requires 10.4.9. I'm using 10.4.8. I can't seem to find any post with positive results. Is 10.4.10 that bad. Sorry is this is a double post. I did this about an hour ago and it never showed up.
    Thanks
    Bob

    I downloaded the upgrade via Software Update and I've had no problems, other than the sound issue. There was a work around that worked fine, then Apple fixed the problem and that download also worked fine for me.
    I've become a believer in repairing permissions before, after and often software updates.
    Running the cron scrips from Onxy often, and emptying my user/library/cache daily seems to be worthwhile too.
    For what it's worth, my little 17" intel Imac keeps chuggin' along.
    Jon

  • Is there anyone who has used an HDMI splitter for Apple TV and cable box?

    The HDMI port on my TV is already occupied by "cable" tv.  I wanted to know if a splitter would work before I purchased one? Also should I expect the resolution to suffer because of the splitter?  The only other ports available on the tv are RGB , s-video and USB.  The TV is a Sony Bravia, Apple TV is 3rd generation.
    Thanks

    Hello Anna,
    Here is one of my poor vi trials.   I have also tried putting some conditionals in some other files but it didn't helped.
    http://rapidshare.com/files/176194859/EXTDLL1.rar.html
    Here is a link for the Freescale's DEMOJM board. It shows how to make a GUI for the board using SimpleUSB.dll & C#.  You can also download the dll from that web page and there is helpfull documentation for the dll.
    http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=USBJM_TRAINING&nodeId=016246fNrgVJ4Cx...
    I am trying to make the same thing with Labview instead of C#. But I am not familiar with the SW issues so am in trouble.
    Thanks,
    Emre

Maybe you are looking for