Is there anyway to copy a selection of slides from one project to another and keep the linkage?

Hi all,
I've created a 'template' type project, with a selection of slides all containing styles of lessons. Some of these lessons are set up in a way that they use several slides, linked to one another in one way (or several ways). The linkage is conatined with selectable objects on each slide (e.g. clicking this object will jump the user to the 5th slide)
Basically, the linkage is important to the set up. But when i take these slides from the template project and create a new project with them, the linkage all disappears and defaults to 'go to next slide', thus screwing up the setup of the lesson.
I tried to create the template as a means of saving time of design with the upcoming creation, becuase these will be used over and over again. I could manually link up each slide again every time i bring them into a new project, but before accepting that I thought it worth asking anybody if they know how to copy in a sequence of slides and have them keep their linkage?
Thanks in advance,
Rich.

So effectively there is no workaround?
Shame there isn't an import item in Captivate dedicated to inter-Captivate projects.
The only thing I can think of is to work over the top of the 'template' project, keep the slides needed for the lesson i'm owrking on, delete the rest, then rename/save as something new.

Similar Messages

  • Copy part of a sequence from one project into another?

    I want to bring a sequence from none project into another. Do I need to import the files into the bin in new project? Or is there a shorter way?
    (This was what I was trying to do in my last post when it all went south. I'll post it there too)

    I have brought an old sequence from a FCE project into FCP, and then copied them into a new( final) sequence, and there's a problem. Some--but not all--of the video files are very wide. Can I correct or do I need to re-import the original files fron the Hard drive?
    By the way, you've pulled my fat out of the fire a few times. Thanks.
    Sean

  • Are there any APIs to move funds from one project to another?

    Hi,
    Are there any Project/Budget APIs to move funds from one project to another with in the same grant or different grant in R12?
    Thanks,

    Hi
    There are API's to load or update budget line amounts, PA_PROJECT_PUB.
    There are API's to load or update agreements and allocate funds to projects, PA_AGREEMENT_PUB
    Dina

  • I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?

    Hello everybody,
    I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?
    I share one Itunes account with other people from my family and one person would like to keep the same songs on the new Ipod as the ones which were on the old one.
    Thanks in advance for your answer.
    Yan

    Hello Chris,
    Thanks for your answer. I was hoping for an easier answer. Too bad there is no drag and drop solution, it would have been much easier.
    Thanks for answering so fast.
    Bye.
    Yan

  • PSE12 Organizer - can you copy photo from one folder to another and import copy into Organizer and still have original in other folder

    I have been using folders to organize all my pictures and I will copy photos from folder to folder, often having them in 2 or 3 folders based on use.  I tried to copy a photo in Organizer PSE12 from one folder to another and you can only move it, that means I can only have one copy of the photo.  That is fine if I am using tags and want to search for it, but I want to have mult copies in mult folders. Organizer will recognize that it is there but it won't import it into the new folder. Until I move it, it stays in the original folder.  I can drag it out of Organizer and drop (copy) it into a new folder fine, but it won't show in organizer in the new folder.  Is there any way to copy and have multiple copies show up in multiple folders?

    Hi,
    The organizer works on the principle of not having multiple copies of the same photo.
    If you have multiple copies spread in different folders, then making changes to one doesn't affect the others. The use of tags and albums are there to give different views of your photos.
    You can't have multiple copies with exactly the same name even if they are in different folders. You could select a photo and duplicate it (File -> Duplicate) and then move the copy into a different folder but the name will be different.
    If you want different folders for a specific reason, it is possible to use albums to collect the group of photos and then export them to a new folder outside of the organizer. You can also rename on export which is useful if you want to arrange the photos in a specific order.
    Hope that helps a bit.
    Brian

  • Copy tracks from one project to another

    (Hopefully, I'm just missing something obvious. Programs like Final Cut Pro and PhotoShop make it very easy to have multiple projects open and copy and paste between them.)
    I frequently copy tracks I like from one project to another. Although it's possible to do, it seems a given that Logic doesn't not like to have more than one project open at a time. This complicates it a bit, but I just copy the track I want, close the current project and open the new one.
    I wish in the edit menu or in the track drop-down menu there was a straight forward "Copy Track" option. Since there isn't, I just select the whole track (which is essentially all the regions) and copy and then paste into new project. The problem is that it brings the content over fine, but not the track info (name, etc.)
    Is there some better way to accomplish this? I don't want to export MIDI tracks as audio, so the Export option doesn't work.
    Thanks,
    Dave

    Harmonica_Lessons wrote:
    I looked at the video again and unless they did some editing in FCP (which would have to be the case), the following frame after selecting the regions shows both gone simultaneously.
    It is quite possible of some FCP editing but as I said first you can do that very fast using two neighbor keys so it can look as one magic shot. The screen capture tools use low FPS settings for media capturing about 15 fps for example.
    I tend to occasionally put a blank track between other tracks as a separator (been doing this since the Master Tracks Pro days).
    I think you can try a little trick for doing that. You can create a "Dummy" empty region inside a folder track for example, and use the folder track(s) as separator(s). I have not tried that yet, cause I'm away of my Logic but it must work this way.
    !http://img59.imageshack.us/img59/4967/aglogo45.gif!

  • Is there a way to move multiple Calendar items from one date to another?

    Hello. I have far too many Calendar items every day in my iCal. Until I finally pare them down to a reasonable level, I need to "reschedule" all of my unfinished ToDo items and reminders, to another day, later in the week.
    There doesn't seem to be any "Select All" feature available.
    Is there a way to move multiple Calendar items from one date to another?
    Thanks in advance!

    Still no ideas? Apple, please come up with a fix. Thanks.

  • --Any way to copy/paste clips from one project to another w/o LOSING TRANSITIONS...??

    I have CS5...
    I'm trying to speed up render/export time. I have multiple edited video's in about 15 different projects.
    I had a couple video's within one project and rendered the work area - consisting of 4 video's...then exported. It was much faster than just going to straight exporting so I wanted to do the same with all the other video's.
    Pull everything into one project - render first - and export from there but premiere doesn't copy transitions from one project to another. Is there any way to get it to copy/paste transitions??
    Thanks

    exported regularly and took 2hrs 50min's for each video....then rendered and exported - took prob around 2hrs total - including rendering/exporting.
    That seems unlikely.  If anything, the separate render/export should take slightly longer (though not that much) as you may also have to transcode the preview files (depending on your preview codec) during the render, as well as decode them for the export.  Besides adding an additional layer of compression, it also adds time.  Here's what I mean.
    Export only:
    1. Decode original media
    2. Render new frame based on sequence, effects, titles, etc.
    3. Transcode that new frame to the export codec of choice.
    Render (1-3) /Export (4-5)
    1. Decode original media.
    2. Render new frame based on sequence, effects, titles, etc.
    3. Transcode that new frame to the Preview codec (if anything less than Uncompressed, this adds time and potentially degrades quality)
    4.  Decode the rendered frame (if not Uncompressed, which adds time)
    5. Transcode that (decoded) render frame to the export codec of choice.
    So you see, the render first process has two extra steps which add time, one of which could also introduce additional artifacts (depending on your preview codec).

  • Can you copy custom To Do List settings from one project to another?

    Using RH9. We created a number of To Do List entries for one of our Robohelp projects that we now want to use in all of our RH projects (File > Project Settings > Manage To Do List for Robohelp Project). Is it possible to copy these entries from one project to another? Or do we need to re-create the list of To Do tasks for each one of our 20+ projects?

    Hi there
    The "To Do" list items appear to be stored directly in the ProjectName.XPJ file. So theoretically it would be possible to copy them by opening one XPJ using Windows Notepad, copying them, then opening the target XPJ and pasting. However, this will likely cause a disparity between the XPJ and the .CPD. So before actually opening the project where you are copying them into, you would want to close the project and delete the CPD. Then modify the XPJ and re-open the project. A fresh CPD should then be baked up and things should be in sync.
    You might also want to submit a Wish Form to ask for an easier way to transfer custom lists. (link is always in my sig)
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • How can I select several emails from 3900 on my 5c and delete the rest easily

         How can I select several emails from 3900 on my 5c and delete the rest easily

    We'll I don't think there's a easy way to delete a lot of emails besides deleting all of them. To delete all of them click on inbox them edit then "mark all" then trash/delete. Other than that you will have to specifically deleted the ones you want to delete.

  • Is there a way to draw a straight line from one point to another?

    Is there a way of drawing a straight line from one point to another please?

    Yes.  First click on this icon:
    Now select the line drawing icon:
    Now press a shift key and drag your mouse on the image to draw a straight line.
    These instructions are for Windows system so you need to adapt the method for Macs.  I can't afford to by an Apple Mac!!!!!
    Good luck.

  • Copying a Single BEx Query from One Infoprovider to Another

    Is it possible to copy just a single query from one Infoprovider to another?
    I know how to copy all of them at once, but I want to know if there is a way to do it just for a single query.

    Ah.  That worked perfectly.
    Awarding points.
    Thank you.

  • Can I copy clips from one project to another?  The clips are still frames captured within a video event.

    Can I copy clips from one project to another?  The clips are frames saved as stills from a video event.  I try the copy & paste but it does not seem to work.

    The video was converted into MP4 and then I could get it into iMovie events.  I had right clicked and saved farmes as stills.  ABout 50 of them,  When I tried to copy and paste those stills into another project I couldn't. They came up blank.
    I ended up going to a Genius appointment at my APPLE store this afternoon and was told that those "stills" aren't really anything. Not a .jpg or video, so the program doesn't recognize them.  So instead I'm using the Project with the 50 stills and copying other .jpgs and video into it.  (This is for a 1961 Class Reunion, so it's old stuff).  Seems to work so far.
    So bottom line seems to be I can use these stills created from a video in the project in which they were created, but no where else.  Do you know a way around this?

  • How do i select a clip from one project and enter it into another?

    how do I select a clip from one project and enter it in another?

    This doesn't seem to relate to Adobe Reader. Please let us know the product you are using so we may redirect you or refer to the list of forums at http://forums.adobe.com/

  • Copying an entire software instrument track from one project to another

    Hello,
    Is it possible to copy or import one entire software instrument track from one GB 3.0.2 project to another? At the moment I've got to copy a region from one project, open another project, paste it in the 2nd project, and open the other one again (which appears to close the 2nd project) to copy the second region. This is incredibly cumbersome because I can't have both projects open at the same time.
    Has anyone found a less tiresome method to do this?
    Thanks
    Hiranya
    Powerbook 15" Hi Res 1.67 GHz 2 Gb RAM   Mac OS X (10.4.6)  

    The easiest work-around I can imagine is to join all regions of the track and copy that. Another option is to freeze the track, which will turn it into normal audio. You might also add your MIDI parts to the library. That will avoid the need to switch between projects, but does require one or two more actions.

Maybe you are looking for