Is there anyway to disable the pullup resistors to 5V on 6070E

The internal pullup resistors on the inputs of the 6070E card are interferring with the circuit of my DUT (the DUT has pulldown resistors).

The E Series boards (6070E) use the DAQ-STC chip for the 8 digital lines of port 0, which consists of +5 V connected to a 50 kOhm pull-up resistor. This is hard wired within the board and cannot be disabled.
If you cannot work around this with your external circuitry, you may need to get a different board with user-defined pull-up/down capability.
PC-DIO-24/96 - User-defined* 100 kOhm
NI-6013/6014 - Pull-down 1.5 kOhm
NI-6533/6534 - User-defined* 100 kOhm
AT-MIO-16D - Pull-up 100 kOhm
PC-LPM-16 - Pull-up 10 kOhm
DAQCard-700 - Pull-up 10 kOhm
E-Series - Pull-up** 50 kOhm***
The DIO-24/96 family allows jumper-selectable pull-up/pull-down configuration. The NI-6533/6534 family of devices similarly allows the
user to configure pulled up or pulled down DIO via the DPULL pin. See your user manual for more information.
**Digital lines 6 and 7 on the AT-MIO-16XE-50 also have pull-down resistors of 50 kOhms.
***The extended digital lines on the 6025E, AT-MIO-16E-10 and AT-MIO-16DE-10 have 100 kOhm pull-up resistors

Similar Messages

Is there anyway to disable the chime when I accidentally catch the microphone icon while texting (phone is in silent mode)

Hi all,
I might be being a little dull here, but my question is exacly as in the title: Is there anyway to disable the chime when I accidentally catch the microphone icon while texting (phone is in silent mode)? I have fat fingers occasionally and whilst people at work don't mind private phone usage to have it occasionally activating the mic and then me cancelling it a little annoying.
Any suggestions?
Thanks
Dave

There is a proximity sensor that should turn the screen off when you place the phone near your face. Do you have a case that's blocking this? Try removing your case. If no case, try restoring you iPhone. If still a problem, return it to Apple for a warranty replacement.

Is there anyway to disable the volume buttons so that you can only change the volume on the screen?

My volume buttons go up and down by themselves.

No. To solve your problem have you tried:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT3576 I have many apps where i must swipe down and it constantly brings down the notification screen. Is there anyway to disable this or activate it a different way because this really bugs me.

I have many apps where i must swipe down and it constantly brings down the notification screen. Is there anyway to disable this or activate it a different way because this really bugs me.

I don't have that problem. Perhaps I touch the screen lower when I wipe down? I don't know for sure but there's got to be some difference in the way that we wipe down. you might wish to do some experimenting.

Is there anyway to disable "per application" volume control ?

Is there anyway to disable "per application" volume control !?
Keep it simple. You can leave per device existing, but per application is a big mess.
I need to spend a lot of time to found why am listening a sound if I decrease all my device volume.
I really hate it. It is not usefull for me, it just worsens my experience with Windows OS.
I always used Widnows, it was much better when this feature simply did not exist.

Hi,
It is by design, I’m afraid that there’s no way to change it.
You can right click the sound icon in the right-bottom corner, open volume mixer or volume control options to change the settings you want.
Regards,
Yolanda
Yolanda
TechNet Community Support

HT1329 if the music that is on the iPod can no longer be accessed through iTunes because it was deleted, is there anyway to recover the music on the iPod if it wasn't purchased?

if the music that is on an iPod can no longer be accessed through iTunes because it was deleted, is there anyway to recover the music on the iPod if it wasn't purchased?

See this support article:
http://support.apple.com/kb/HT1848
You can also download at least some of your content (audiobooks being a notable exception) again from the iTunes Store:
http://support.apple.com/kb/ht2519
For additional instructions, particularly for content not purchased from the iTunes Store, check out this user tip from TuringTest:
https://discussions.apple.com/docs/DOC-3991
and this page on "How-to Geek":
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Is there anyway to view the purchase order information foreach transaction

hi sap techies
Currently the FAGLB03 does not display the vendor related information for transactions coming through as a goods receipts (transactions processed by receiving dept) and/or related to purchase orders. Is there anyway to view the purchase order information for each transaction? For example, we cannot see vendor code/name, po #, etc.

HEllo,
FAGLL03 displays information from the line items of the accounting documents. If the information you want to display exists in tables you can display. But if the information you want comes from other tables you cannot display.
As a workaround you can check the SAP note 1034354 which tells you how to add the offsetting accounting information and then you cna display some of the information you want. To do so you can create your own coding into a BADI implementation.
REgards,
REnan

HT1373 I bought an ipod nano 5th gen and it came with 900 songs on it. How can i retain the music before i authorize this unit to my itunes account? It says it will erase all content once I sync with my imac7. Is there anyway to keep the music??? please h

I bought a used ipod nano 5th gen and it came with 900 songs on it. How can i transfer, sync, and retain the music before i authorize this unit to my itunes account? It says it will erase all content once I sync with my imac7. Is there anyway to keep the music??? please help!!
Thanks,
Aaron

The music does not belong to you. You have no legal right to it and there is no way to keep it.
Sorry

I had to buy a new computer and had to open a new ITunes account is there anyway of merging the 2 accounts?

I recently had to buy a new computer and had to download ITunes again, it wouldnt let me open ity with my normal account so had to open a new one, because of this i cant back up my phone cause it doesnt says as the data is from another ITunes i will loose it all. Is there anyway to merge the 2 accounts so i dont loose all my data when updating my phone?

There was no reason to start a new account.
You can certainly use your old account on any computer/device.
You cannot merge accounts.

HT201269 I have years worth of music on my PC that is about to die. If I get an iPad is there anyway to get the music from my PC onto the iPad? I have the iCloud but my understanding is only music actually purchased from iTunes lives int he cloud.

I have years worth of music on my PC that is about to die. If I get an iPad is there anyway to get the music from my PC onto the iPad? I have the iCloud but my understanding is only music actually purchased from iTunes lives int he cloud. I have music that was legally purchased and loaded to my iTunes account from cd's that I no longer own. I need a new laptop and am deciding between the iPad and the Mac book. I use the computer for music, photos, and web - nothing else and nothing fancy. I don't know that there is a way to save my huge music library without saving it to an external hard drive and then loading it to a new one (does the iPad have a port to plug an external hard drive into?)

First, you would need to make a backup of the entire iTunes folder on the PC. You could get music to the iPad if the PC was still functioning, or you would have to move the music to another computer. An iPad is not a laptop, and does not have a port to plug an external drive into. You can sync music to the iPad from the computer, but you are correct, unless you get iTunes Match, you would need a computer to copy the music to and then sync to an iPad.

My old hard-drive has corrupted and i have lost my library. i lost my back up too. I have restored all my purchased stuff but had 5000 songs uploaded from my CD collection. Is there anyway of transferring the CD tracks from my ipod or ipod to my iMac?

My old hard-drive has corrupted and i have lost my library. i lost my back up too. I have restored all my purchased stuff but had 5000 songs uploaded from my CD collection. Is there anyway of transferring the CD tracks from my ipod or ipod to my iMac? Or do I have to manually upload the CDs again?

Hi,
See if this doc helps https://discussions.apple.com/docs/DOC-3991
Jim

My hard drive crashed and everything on my laptop was lost... is there anyway to transfer the music that I had put onto my phone into the itunes on my computer ?

My hard drive crashed and everything on my laptop was lost... is there anyway to transfer the music that I had put onto my phone into the itunes on my computer ?

I have a similar issue. My hard drive crashed, so I had a new one installed and I'm basically starting from scratch on my computer. My iPhone has a lot of my stuff on it (photos and music in particular). When I plugged into iTunes I did a "back up" of my phone to the computer....this transferred the photos in my camera roll, and music purchased through iTunes.
So....I still have a ton of photos (saved in folders, not my camera roll), and music (older stuff not purchased through iTunes) that I want to get to my computer. I am scared to "sync" my phone in iTunes for the first time.....if I do this, will it make my phone match my computer (effectively erasing the stuff on the phone?). What I want is for my computer to match my phone (thus transferring the additional photos and music). Is the third party software the only way?? Does it really work well/is it worth the money? Thanks very much for the help.

Is there anyway to record the time of a signature on a document?

I work in real estate and timely signatures are very important. Is there anyway to show the time a document was signed on the actual document?

Hi Scott,
Yes, this is quite possible using the text-tagging feature in Echosign. A sample of this text-tagging code would be the following for a signature block along with the date and the time:
{{Sig1_es_:signer1:signature}}
{{Date_es_:signer1:date}}
{{Time_es_:signer1:calc(now()):format(Date,”hh:nn:ss tt”)}}
So, in the instance where it shows the {{Time}} block, the calculation would be broken down as follows:
{{Time_es_:signer1:calc(now()):format(Date,"hh:nn:ss tt")}}
"calc" tells the app to calculate, "now" returns the date and time when the signature is signed. Along with the Date, you also get the hours(hh), minutes (nn), and seconds (ss). The "tt" at the end designates the AM or PM status whereas if you wanted to use Military or 24-hour time, you'd drop the "tt" and simply use "HH" in place of the "hh".
I hope this answers the question for you and if there are any other questions in follow-up to this, feel free to ask!
Also, for additional information on text-tagging, feel free to check this link.
ODG.

I forgot my Password of Media Folder App. Is there anyway to recover the Password

Hi, I forgot my Password of Media Folder Application. Is there anyway to receover the Password or a fresh installation is required ??

You can recover it if you have an iCloud or iTunes backup which contains it otherwise it is gone.

Is there anyway to use the kerning in a selected sentence?

Is there anyway to use the kerning in a selected sentence instead of selecting each space between the characters?

ok that is understandable and fully reasonable. but tech is tech. when one is made to do everything it can also be limited through the code.
Would anyone be able to make or program something to override the code and just use it to send/receive through the hardware. like said the bluetooth tether feature was not doable but mywi was able to through jailbreaking.
what i am asking is, would be it possible?
( edit: didn't read the part of the profiles. )
profiles are not editable? ... or even replaceable?
or is it really just too much work ?

Is there anyway to disable the pullup resistors to 5V on 6070E

Similar Messages

Maybe you are looking for