Is there anywhere in the UK i can get replacement rubber feet for my 2009 macbook pro?

Hi All,
my feet have fallen off   is there anywhere i can get rplacement ones or are there any contact details to go straight to apple?
Ta
Mark

You can get them from any Apple Store or any Apple Authorized Reseller or Repair Centre.
I had to replace the bottom feet of my late 08 Macbook Uni and went to an Apple Store in my area and they just gave it to me.  Mind you, not all Apple Stores will give it to you for free.
Good luck

Similar Messages

  • Where can I get replacement rubber feet for Macbook Pro 2009?

    Does anyone know where I can get the black rubber feet that go on the bottom of a Macbook Pro (2009)?
    I have checked with Apple stores and they said they don't have them.
    Thanks for any help you can give me.

    OGELTHORPE wrote:
    Courcoul, greeting friend;  Might not those feet subject the MBP to high altitude sickness?
    Ha ha! Then my MBP, sitting on top of a RoadTools CoolPad with a 3/4" rise in the rear in addition to that afforded by the Speck hard shell's integrated feet, will surely die of oxygen deprivation...

  • Any idea where I can find replacement rubber feet for my Magic trackpad?

    I lost one of my rubber feet on my magic track pad, any idea where I can find a replacement?

    RadioShack

  • I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

    I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

    Depends on what you had
    If you had iPhoto version 9.5.1 then you can reinstall from the app store under purchases
    If you had any version of iPhoto '11 then you can install for free from the App store
    If you had any earlier version of iPhoto (iPhoto '09 version 8.x.x) or older then you need to purchase iPhoto '11 version 9.x.x from the app store
    If you had iPhoto '08 (version 7.x.x) or older then you also need to download and run the iPhoto library upgraded prior to launching the new iPhoto
    LN

  • Please, help! After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.

    Please, help!
    After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.
    Thanks

    Have you been trying to download from the app store? Did you get a message?
    As a suggestion, you might go to an Apple store (genius bar appointment) for help. As far as I know, there should be no charge.
    Barry

  • Can i install 16gb ram for my 17" macbook pro build 10k549 running 10.6.8?

    can i install 16gb ram for my 17" macbook pro build 10k549 running 10.6.8?

    What's the year and model number? If you go under Apple menu->About This Mac->More Info->System Report, you can find the model number - something like "MacBookPro8,3".
    Clinton

  • Where can I get some feet for my 15" Macbook Pro (mid 2009) without the cost of A$200

    I am loosing my mind. Can anuone please help?
    I have a 15" mid 2009 Macbook Pro, that I love. It is my 6th Apple computer so it's not like I haven't contributed to the Apple estate.
    I use it for work and study so it pretty much runns continuously and has since its purchase in 2009. So, as you can imagine wear and tear are starting to show.
    3 of the 4 feet have come off and this is making me crazy. It does not ventilate properly and doesn't sit well on the desk. I have attempted to buy all manner of feet to fit it, but nothing works.
    So, I took it to my local Apple store a while ago in search of some replacement feet for it. Because, Apple have to inspect all repair jobs.
    I cannot buy, the feet alone, I must buy the complete bottom housing for it at the cost of A$199.00 (WHAT!!!, I HEAR YOU SAY!!!, and that is pretty much exactly what I said when I was told this by my apple genius (and yes, I did say Genius with a sarcastic tone), but certainly the thoughts that ran through my mind were far stronger).
    So, in my eternal search to make my perfectly working but incredibly annoying, beloved macbook pro be as good as ever, I have been to 2 "apple" dealers in the hope to buy this product at a cheaper price. Because, 1. I don't want the base, only the feet and 2. I don't want to pay 200 bucks for it.
    Anyway. the first purchase I made was through some dodgy chinese website. Apparently, there is no one at the other end, because all corespondense was ignored. But I did get my money back.
    But the second has really done my head in. www.applecomponents.com had advertised the part at $US69. So, I purchased and paid with paypal and all was well with the world. But, This morning I recieved the following email. And this is the entirity of the message from a business with obviously no customer service skill, not address, no phone number. Just a rude individual at the end of the email.
    Remember, this was the whole email...
    "so it's looking like this part was in the wrong bin. we don't actually have one. we can get new, but it would cost around $150.
    please advise?"
    ***? (and I am really holding back bolding that text and setting the font size to 68).
    In Australia, if a product is advertised at a price, that is what we pay for it.
    So, I re-check the website and the price has increase $100 but, it still says "in stock".
    Right about now, I am starting to get quite frustrated, with this faceless nameless person/company/shonk.
    I get in touch with some consumer experts and reply and I recieve the following reponse...
    "it was an honest mistake. we have a lot parts. we haven't sold one of these bottom cases for over 6 months. whoever labeled em' did it wrong. I don't have the part, but I have access to ordering it new with my vendor - hence the price change.
    feel free to call me anytime and we can talk it out.
    thanks
    phillip
    503-806-6423"
    (not really sure where this phone number resides so the 10 digits are useless)
    Now, Phillip is not the person I made the payment to. The payment was made to Alex Kraft.
    Who, After I demanded the product. Has just refunded my money and dissapeard off the planet.
    I am sick and tired of these shonks and it is now my mission to stop these people from trading.
    Sorry for my digression but, I feel, all should be aware of these people. Scammers.
    But, if anyone knows where I can get some feet from someone who will bloddy supply them at a price that is reasonable.
    Please let me know.
    Thanks

    your situation is not new.  Others have been told by Apple that they have to purchase the entire bottom panel in order to replace the feet.  There are engineering solutions that can solve this problem, but to pay nearly $200 to replace a part that costs less than $1 (I am being very, very conservative) to manufacture is too excessive.
    I have had the feet come off as well.  Fortunately for me, I have not lost them and have been able to replace them.  Why they cannot sell them individually is a puzzle to me.  Perhaps some bean counter at Apple feels its too much effort to have these items individually  in their inventory.  I have had nothing but good comments to say about Apple, but sadly this is an exception.
    To address your problem, I have seen second hand ones advertised on Ebay.  The price was a bit steep, $10 as I remember.  Other wise, wjosten's suggestion is the only alternative.
    Ciao

  • Does anyone know where you can get a rubber pad for the bottom of the Macbook Pro 13"?

    My Macbook Pro 13" tends to get a bit warm while sitting on my lap at times. I really don't want to put a case on it, but I wondered if anyone sells a rubber pad that might cover the bottom of the laptop? I would think this would help with the heat and also provide better gripping when you set it down on a surface. Nothing fancy, just a rubber pad that would stick on.
    Never hurts to ask
    Thanks
    --Aric

    The metal body is a key part of the heat dissipation.
    And the MBP is a "notebook", not a "laptop".  Air flows around the body to get rid of heat.
    I have used my MBP on my lap, but always balanced on both legs and left as much metal as possible exposed.  Now I understand even that was risky.
    If you want to use a hard-surface that the MBP sits on and the surface sits on your leg, then OK.  But the heat you feel is the MBP clearing itself.

  • Can i install flash drive in mid-2009 macbook pro

    I want to increase the storage on my MacBook pro - mid-2009. I use Final Cut so there are demands. Must I stay with a spinning drive or can I install a large flash drive? I big can I go? 2.26 ghz, 8 gigs ram, running latest Mountain Lion (10.8.2)
    Thanks

    One option is to remove your DVD drive and install a second drive.  So you could have an SSD (flash drive) for speed and a traditional drive for volume.  This might be helpful:
    http://eshop.macsales.com/installvideos/macbookpro_13_unibody/
    Good luck!

  • Where can i download Os Lion for my new macbook pro

    Hi,
    i have just purchased a new macbook pro but it has snow leopard installed. The genius`s said i can download lion for free from apple.. any body know the link for this. ??
    regards
    Keith

    Of course, just going to the App Store will require that he buy it, and going to the Apple website does not provide anywhere for downloading Lion.  No offense, but you should avoid giving advice if you don't actually know if your advice works.
    Keith, see the following page to get a code that will allow you to obtain Lion for free:
    http://www.apple.com/macosx/uptodate/

  • Where can i find EFI firmware 1.6 for 17" 2009 Macbook pro

    Hi I'm havng freezing beechball issues with my Crucial M4 SSD and my 2009 17" MacBook Pro and have read that downgrading the EFI firmware from 1.7 to 1.6 can solve the freezes can anyone point me to where i can get this as the links I have found out there are only compatible with the 13" and 15"
    Thanks for your help

    David Goodman wrote:
    ...have read that downgrading the EFI firmware from 1.7 to 1.6 can solve the freezes...
    Where did you read that?
    Everything Apple says is the firmware can only be upgraded and not downgraded.
    Apple is only going to supply the lastest firmware updates here:
    https://support.apple.com/kb/HT1237
    and to apply is here
    https://support.apple.com/kb/HT2213

  • Can I use this RAM for a 2010 MacBook Pro: Kingston 8GB (2 x 4GB) 204-Pin DDR3 SO-DIMM DDR3 1333?

    I don't want to waste money or ruin my MacBook Pro?
    Here are the specs:
    Kingston
    Model
    KVR1333D3SOK2/8GR
    Type
    204-Pin DDR3 SO-DIMM
    Tech Spec
    Capacity
    8GB (2 x 4GB)
    Speed
    DDR3 1333
    Cas Latency
    9
    Voltage
    1.5V
    ECC
    No
    Buffered/Registered
    Unbuffered
    Multi-channel Kit
    Dual Channel Kit

    No you can not use it.  Your mac uses DDR3 1066, not 1333.  You need this type of ram:
    204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  • My iPod got stolen. Is there anything FROM the iPod I can get back? Warranty? Music? Videos?

    Is it possibly?

    do you have to set up an iCloud account on the iPod to  get info back?

  • I would like to know if there is any way that I can get a factory unlock for my iphone5 ios6.1.4 completely free? it was donated to me..please help... Thank you and God bless you ,your family,your job, enemies,your friends and home.God Bless

    Please letm know if there is any way for me to unlock my iphone 5 ios 6.1.4 completely free.
    that was donated to me by one of the members of the church for which I am the Pastor.the phone that I had was broken and had no way to communicate other that personally,... to people.that's why I was given this phone which I later found out to be locked to T-mobile,USA. please help. Thank you very much!

    Thank you for he answer! But I am living in Belize, C.A. The phone was donated by one of the members of the church for which I am the pastor. The phone is connected with T-MOBILE - USA. iPhone 5 iOS 6.1.4.  Please let me know if there is any way that the carrier would unlock it. For the phone is no longer in their country. I can surf the Internet but not use my carrier's service here in Belize.

  • Where can I buy a skin for my 15" macbook pro.....

    ....that don't cover up the Apple emblem? All I've come across are ones that completely cover the top. I want the Apple logo to shine through!!!

    www.styleflip.com They pre cut the apple logo for you and they dont damage your equipment and are really easy to put on your computer. You can also upload your own images and design them however you want.

Maybe you are looking for

  • Images in RH Html are fuzzy; generated Help images are fine

    I am using RH 7.003.001. I have over 7000 files in my project. Recently the images in RoboHelp all appear fuzzy. They are fine in my generated project. I have 2 GB RAM and a 100 GB drive with 41 GB free. Disk Defragmentor says I do not need to defrag

  • Zen Nano Plus Co

    Hi Support, My Zen Nano Plus, the wordings and the serial number came off, how do i go about to change the cover? The rest of the Mp3 is working perfectly fine. I called the technical helpdesk, they told me i need to change the whole player, i was so

  • Not appearing the forms after login in to EBS

    Hi All, After login in to EBS clicking on any form based application foam not appearing through browser just it says done.From there its not getting any thing error also. But where as i am opening like this http://localhost.com:8000/dev60cgi/f60cgi i

  • LMS 3.2 CiscoWorks Daemon Manager does not startup

    When trying to start CiscoWorks Daemon Manager i get the following message: "The CiscoWorks Daemon Manager service on local computer started and the stoped. Some services stop automatically if they are not in use by other services or programs." I hav

  • Print Button issue... Acrobat won't print

    We have one particular machine here at work where Acrobat will not print. You can bring up the Print dialogue box and change all the print settings, but when it comes time to actually print the document, it's like the "Print" button does not work. It