Is there anywhere to report scam emails?

I received an email stating I had an invoice for a purchase £28.99 that I didn't make, the link took me to an official looking site, but looking further into it the site I realised it was not secure. I know others won't look into it as much as I did and may enter their Apple id and password into the fake site. Does Apple have anywhere where these scam emails can be reported?

Forward them to [email protected] and then delete them.
(124697)

Similar Messages

Scam emails are arriving every day asking for passwords etc

are there a lot of scam emails arriving for all apple customers?

Just ignore and delete them. Identifying legitimate emails from the iTunes Store.
[email protected]

I recieved a scam email from apple. then sent me the same email using my own email account. how do I report this to apple. can't find any contact details.

hi over the past month have received maybe 5 scam emails from apple.
I opened one the other day cause I thought well maybe it is from apple.
went through the steps and it was amazed at how well they did at copying apple website. you could even go to the apple shop page from their page!
what set me off that it was fake was that I tried to open the other apple pages along the top and it wouldn't let me. so I opened my own apple page and logged in. and realised that they don't ask for your bank details in your Apple ID account.
anyways so now what has happened is I got an email today " from myself" with this same scam email. it is as if they have hacked my email account and sending me these emails. I want to report this to apple but am unable to find any contact details apart from call back options. does any one have any advice on this.

I've had that same exact issue, I received the first e-mail claiming to be from Apple last night (though over the past week I've received two other scam e-mails from different addresses claiming that my bank transactions have been aborted). It said it was from my own address, and I checked it closely to make sure it wasn't a spoof account but found it was indeed my own e-mail address. Five minutes ago I changed my password, and I have just now received a second e-mail exactly the same, still coming from my own account. My best guess at an explanation is that it may have been sent before I changed my password and there was just a delay in the message sending, resulting in it coming through after changing my password.
I've now forwarded the e-mail on as an attachment to the [email protected] address, however this still doesn't help me with regards to stopping these e-mails. It concerns me that even though I changed my password they still possibly have access to my account. I tried checking my account activity but as opening the mail app on my iPhone is considered as a log in and I check it almost twice an hour, it's impossible to tell which could possible be an intruder logging in.

HT2128 I have an email purportedly from Apple store which I am sure is spam or a virus. I have not opened the attachment. Is there anywhere I can send it?

I have an email purportedly from Apple store which I am sure is spam or a virus. I have not opened the attachment. Is there anywhere I can send it?

They aren't going to do anything, and they have no place to which you can send it. Put it in the Trash and forget about it.

SCAM EMAIL OR REAL?

([email protected])
is the email address that send this to me:
Your Apple ID was just used to download FOOTBALL MANAGER HANDHELD 2014
from the App Store on a computer or device that had not previously been
associated with that Apple ID.
ORDER NUMBER: QWACVW291HD
ORDER TOTAL: 9.35 CAD
If you initiated this download, you can disregard this email. It was only sent to
alert you in case you did not initiate the download yourself.
If you did not initiate this download, we recommend that you go to
ITUNES PAYMENT Cancellation Form
Thank you.
Should I be woried? Is this real? Or is it one of those scams? When you click on the cancellation form it takes you to login your account then it takes you to a page to verify Credit Card info right then and there I was skeptical.

Scam!
Do not enter anything.
Delete it and report it to Apple.
Barry

Report with email

hi everyone,
procedure used:
i am sending an email using the report program.
i am using the SAPFORM to send the mail..
first i am sending the outout to the spool and from there i am sending the email.
problem occured:
The details are fetched from spool when i run the program..but when i again send the sanme program i getting the details along with the details of the previous mail...
let me send the code of what i have used..can anyone try and resolve this problem please..
*& Report ZMAIL_SEND
REPORT ZMAIL_SEND.
DATA : x_itcpo TYPE itcpo, "SAPscript output interface
 x_itcpp1 TYPE itcpp, "SAPscript output parameters
 x_itcpp2 TYPE itcpp,
 c_std_text(8) TYPE c VALUE 'STD_TEXT', "variable that is used in SAP SCRIPT
 it_packing_list TYPE TABLE OF sopcklsti1 INITIAL SIZE 0 WITH HEADER LINE,
 it_objtxt TYPE TABLE OF solisti1 INITIAL SIZE 0 WITH HEADER LINE,
 s_spool TYPE tsp01-rqident,
 it_spool_file TYPE TABLE OF soli INITIAL SIZE 0 WITH HEADER LINE,
 v_sender TYpe soextreci1-receiver VALUE '[email protected]',
 c_addr_type TYPE soextreci1-adr_typ VALUE 'INT',
 it_reclist TYPE TABLE OF somlreci1 INITIAL SIZE 0 WITH HEADER LINE,
 v_receiver TYPE somlreci1-receiver VALUE '[email protected]',
 x_docdata TYPE sodocchgi1,
 tab_lines TYPE sy-tabix,
 lin1 TYPE i.
------ Printer settings structure -
x_itcpo-tddest = ''.
x_itcpo-tdrdidev = ''.
x_itcpo-tdnewid = 'x'.
x_itcpo-tdsenddate = sy-datum.
x_itcpo-tdsendtime = sy-uzeit.
x_itcpo-tdschedule = 'IMM'.
x_itcpo-tdimmed = ' '.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
 device = 'PRINTER'
 dialog = 'X'
 form = 'ZTEST_FORM '
 language = sy-langu
 options = x_itcpo
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
SPONUMIV =
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT = X_ITCPP1
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Assigning the standard text name
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
 name = c_std_text
 value = 'ZTEST_STD1'
 value_length = 0
 replace_symbols = 'x'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 element = 'E05_HEADER '
 function = 'SET'
 type = 'BODY'
 window = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 element = 'ELEMENT1'
 function = 'SET'
 type = 'BODY'
 window = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 element = 'E05_FOOTER '
 function = 'SET'
 type = 'BODY'
 window = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
 RESULT = x_itcpp2
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
 UNOPENED = 1
 BAD_PAGEFORMAT_FOR_PRINT = 2
 SEND_ERROR = 3
 SPOOL_ERROR = 4
 CODEPAGE = 5
 OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
***********************EXECUTES SUCCESSFULLY UNTIL THIS*********************************
------- spool no. of the spool generated -
s_spool = x_itcpp2-tdspoolid.
------- Fetching of the spool contents -
IF NOT s_spool IS INITIAL.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
 EXPORTING
 rqident = s_spool
 first_line = 1
 last_line = 1000
 desired_type = 'RAW'
IMPORTING
REAL_TYPE =
SP_LANG =
 TABLES
 buffer = it_spool_file "mail content
BUFFER_PDF =
EXCEPTIONS
NO_SUCH_JOB = 1
JOB_CONTAINS_NO_DATA = 2
SELECTION_EMPTY = 3
NO_PERMISSION = 4
CAN_NOT_ACCESS = 5
READ_ERROR = 6
TYPE_NO_MATCH = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALCULATING THE NO OF RECORDS IN IT_SPOOL_FILE************
DESCRIBE TABLE it_spool_file LINES lin1.
*------ Filling the spool contents into internal table obtxt,-----
*------ whose contents will be displayed as the body of email -
IF lin1 GT 0.
LOOP AT it_spool_file.
 it_objtxt-line = it_spool_file-line.
 APPEND it_objtxt.
 CLEAR it_objtxt.
 CLEAR it_spool_file-line.
ENDLOOP.
ENDIF.
DESCRIBE TABLE it_objtxt LINES tab_lines.
READ TABLE it_objtxt INDEX tab_lines.
*------ Calculating doc. size which is email -
x_docdata-obj_name = 'ZTEST_STD1'.
x_docdata-obj_descr = 'HAI TEST'.
x_docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_objtxt ).
*THIS SET OF CODE IS TO UPDATE THE RECEIVER EMAIL ADDRESS
CLEAR it_reclist.
REFRESH it_reclist.
it_reclist-receiver = v_receiver.
it_reclist-rec_type = 'U'.
it_reclist-copy = 'x'.
it_reclist-blind_copy = ' '.
APPEND it_reclist.
*contains the document description
CLEAR it_packing_list.
REFRESH it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_objtxt LINES it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
APPEND it_packing_list.
*this is the function module which sends the mail
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
 document_data = x_docdata
 put_in_outbox = 'X'
 sender_address = v_sender "senders mail address
 sender_address_type = 'INT'
 commit_work = 'X'
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
SENDER_ID =
TABLES
 packing_list = it_packing_list
OBJECT_HEADER =
CONTENTS_BIN =
 contents_txt = it_objtxt "this is the table which contains the content of the mail
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
 receivers = it_reclist "contains the receivers mail id
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi Satheesh,
1.
Actually Spool rq no is stored in the table tsp01.If that is giving problem ,try to use this logic.It also works fine.
CONCATENATE sy-repid0(9) sy-uname0(3) INTO tsp01-rq2name.
SELECT MAX( rqcretime )
 FROM tsp01
 INTO tsp01-rqcretime
 WHERE rq2name = tsp01-rq2name.
IF sy-subrc = 0.
 SELECT SINGLE *
 FROM tsp01
 WHERE rqcretime = tsp01-rqcretime.
 IF sy-subrc <> 0.
 MESSAGE s000(0k) WITH 'Spool Number does not exist'.
 EXIT.
 ENDIF.
ENDIF.
2.
It gives Latest Spool no for this program .
Thanks,
Venkat.O

How to send ALV report by Email

Hi.
we have developed a block ALV report which has 3 reports i.e Detail report , summary report and Error report. Currently user run the report in background.However there is need to send this report by Email . I can use FM:SO_OBJECT_SEND . I want how to pass this report to FM and how to handle if there are multiple email ids. I think we can create a group of the user with email id in business workplace and pass the group to FM.
I need help in how to assign the report and user group to this FM

Hi,
You may use the code given by Amit in this link -
MAil Attachment.
It is perfect to handle any type of email requirement.
Regards,
Amit
Reward all helpful replies.

Send report via email as xls file.

Hello from Spain,
Sorry if this is not the correct forum. It's both a forms and reports question, but I think it fits better in the reports forum. I have queried into the forums for similar questions and found some threads without any replies around this same issue. I wish I am lucky today.
I have developed some web forms which generate pdf and txt reports. The latter ones make use of desformat=delimiteddata when calling the reports. They run fine. I have also developed one form which suscribes those reports to email addresses. To do so, I am setting those email addresses in the DESNAME reports parameter and setting DESTYPE parameter as MAIL. They arrive as an attachment with pdf or txt extensions.
Now, I am required to deliver those reports as xls files. I have been reading that desformat=spreadsheet would allow me to do so (as well as formatting the reports and make them look "cuter" than by using just delimiteddata), but have been unable to do it so far. When setting desformat=spreadsheet, reports are sent via email as html attachments, and when they are opened they look awful. Is there any way I can do this? It shouldn't be a too big deal, but I feel completely unable.
Thank you,
Fernando G.

Hi,
Please check the following forum thread that may help --> Re: Generate report in Excel and send to user via email.
Thanks, RZ

Send report to email address!

Hi Expers,
Besides Information Broadcasting, is there anothe way to send out a certain query report to email address? Like the one in Process chain error report! Thanks!
Linda

Hi
See
http://help.sap.com/saphelp_nw04/helpdata/en/28/734d3caa70ea6fe10000000a114084/content.htm
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/28/734d3caa70ea6fe10000000a114084/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/28/734d3caa70ea6fe10000000a114084/content.htm</a>
Thanks
SKR

Interactive Report Subscription emailing different dataset

Hi All,
I am having a bit of strange problem with subscriptions email on an interactive report.
I have the report to email users every morning from an interactive report. The dataset that is emailed is not the same as the report on the interactive report screen. The variance between what is emailed and what is on the report screen page is quite large and it is not an issue of the data changing between the email fist going out and the report screen being viewed.
Also, is there a way for a user to 'unsubscribe' from a report?
Any help would be great,
Thanks
Chris
APEX Version v: Application Express 4.0.0.00.46

Hello Becky,
While exporting from DEV you should set NO for following options
<li> Export Private Interactive Reports
<li> Export Interactive Report Subscriptions
Because, Private Reports and Subscriptions will be made by end-users and they will be made on Prod systems. So if you export them from DEV and import into PROD, then all private reports and subscriptions will be lost on PROD.
Regards,
Hari

Webi Publication - Do not send report by email when zero records

Hello,
I have a report that I am scheduling. It is using dynamic recipients and personalization based on the recipients. Some of the recipients will have zero records for the report and I do not wish to send the report by email to them. I have searched and found a "workaround" of adding a conditioned error in the footer to get a division by zero error if there are no records. However, the report still runs and gets sent to the recipient with no data. Any way to accomplish what I want to do?
I am using SAP BusinessObjects BI Platform 4.1 Support Pack 2 Version: 14.1.2.1121
My data sources are Excel, so I am not using a Universe for this particular application.
Thank You in advance.

I have been trying different options and the most promising one would be to generate a list of dynamic recipients that have data and output it to Excel file. I can use that Excel file as data source for a Webi Document that is going to be used as the dynamic recipient document in a publication.
One problem is I cannot automate the creation and replacement of an Excel file in InfoView folders. This means I would have to update the Excel file manually. Also it seems like the Webi document used for dynamic recipients must be refreshed and saved, otherwise the old list of recipients is used by the publication.

Scam email: Adobe-Reader-Pro

A variation on an old scam was received this morning by the company that I work for. At first glance it looks genuine by its simplicity but has anyone ever heard of Adobe Reader Pro? There is the official looking logo and even an address in California but simple checks can confirm the scam. I am told that clicking on the links will result in a bunch of malware being installed into your computer. Below is the text from the message received this morning:
ADOBE PDF READER SOFTWARE UPGRADE NOTIFICATION
This is to remind that a new version of Adobe Acrobat Reader with enhanced features for viewing, creating, editing, printing and internet-sharing PDF documents has been released.
To upgrade your application:
+ Go to [link removed]
+ Get your options, download and upgrade.
[link removed]
Thanks and best regards,
John Brian
Adobe Acrobat Reader Support
Copy rights Adobe 2010 © All rights reserved
Adobe Support | 168 Edwards Road | Cerritos | California | 90703 | USA

NOTE READERS: Don't click the links in the original post, they are straight from the scam email.
@anthonycross - Unfortunately you didn't just include the text from the email, but the scamming links too.

How to configure a Office 365 email on SAP BI 4.1SP05 server to send scheduled reports by email ?

Hi All,
I am trying to figure out how to configure office 365 server on BI platform so that I can send scheduled reports by Email.
Below are the system details:
SAP BI 4.1 SP05
Microsoft Office 365 Email account
I referred to the SCN post for configuring gmail.
I could easily configure my gmail account.
I tried same logic with Office 365. Instead of using port 465 (for gmail) I used port 995 (for office 365).
That didnt work.
I also tried using port 587 for TLS authentication but that doesnt work either.
SMTP Link for office 365: smtp.office365.com
For simplicity purposes, I have opened all the ports on the firewall and server.
Please let me know if I have missed anything or if my whole approach is incorrect ?
I am open to suggestions and workarounds.
Thanks,
Prathmesh Pai

Hi there,
When the order is saved, the system will call the mail ID maintained in SU01 of the user.
It will then trigger the mail to the regular outlook mailbox.
Else in some cases a new Z table is defined to maintain the mail IDs. System will trigger the mail through outlook. It has that inbuilt capability.
Just ask your user to check his mail box to see if he has received the mail.
Regards,
Sivanand

SSRS Data Driven Subscription Split Report on Email

I have a requirement to email an SSRS report to each of the individual emails referenced in the report.
Think of it is as a mail merge wherein there are 5 persons receiving the report.The Current SSRS Report contains 5 Letters. The Email Subscription dataset is identical to the one upon which the report is based and works as expected. The problem is that currently
it is sending the ENTIRE report to each email rather than sending only the report that corresponds to the applicable email ( I have heard this referred to as bursting the report).
Is there some setting that I may be missing? How can this be achieved?
Again I have Info
Report A
(user1 info, User 1 Email
User2 info---------------BEING EMAILED TO ----------> User 2 email
User3 info User 3 email
User4 info User 4 email
User5 ) User 5 email
And I want
Report A
(user1 info--------------BEING EMAILED TO ----------> User 1 Email
User2 info---------------BEING EMAILED TO ----------> User 2 email
User3 info --------------BEING EMAILED TO ----------> User 3 email
User4 info --------------BEING EMAILED TO ----------> User 4 email
User5 info --------------BEING EMAILED TO ----------> User 5 email

Hi Garrett_ll,
After testing the issue in my local environment, we can refer to the steps below to achieve your requirement:
We should add a parameter named User in the report use User field as Available Values.
Add a filter as below in the corresponding tablix:
Expression: [User]
Operator: =
Value: [@User]
Deploy the Report to report server.
During the data-driven subscription, in the step 4 (Specify delivery extension settings for Report Server Email). Below “To” option, select “Get the value from the database”, then select User field.
In the step 5, we can configure report parameter “Get the value from the database”, then select User field.
The following article about Create a Data-Driven Subscription, you can refer to it.
http://technet.microsoft.com/en-us/library/ms169673.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I just ordered an iPad 4 32gb from Amazon but sold by a store called iPadShop. In the customer reviews there were several reports of this store selling used and refurbished iPads as new. How can i verify mine is new and not used when it arrives.?

Ok, first time here, so forgive me if Im repeating the question. I just ordered a NEW iPad 4 32gb from Amazon, but is actually being sold by a seller called "iPadShop". Although this seller got a high approval rating of 4.9 there were several reports of customers receiving used and refurbished iPads but sold as new. Once I receive mine how can I verify it is new. Also, even the ones that were new were purchased by this seller and then resold, which shortened the life of the 1 year warranty offered by Apple..?

If you just ordered it, I suggest you cancel your order as soon as possible. If you can't contact Amazon, call your credit card company and cancel payment on that. Why go through worrying about the ipad you are paying for as new? If it's to save money, then that can be defeated if you get a used or refurbished ipad with a less than full one year warranty. You'll be dealing with the ipad shop's return policy which could mean that once you open it, it's yours, unlike when you buy from Apple you have a full 14 days to return it even if you've opened it.
I looked at Amazon and did not see a price difference. If cost led you to buy from Amazon, what are you saving?
I suggest you buy it directly from Apple. If cost is an issue, consider buying a refurbished ipad from the Apple online Refurbished store. I would not buy a refurbished anything from anywhere but the Apple online refurb store.
The ipad 4 32 gb is $499.00 refurbished - a savings of $100.00 vs. a new one. We bought two ipads last year and one as a gift this year and they have been great!
All ipads sold in the Apple refurb store come with new front and back covers, a brand new battery, a full one year warranty, and in case it matters, come in a new white Apple box like all ipads do. Earphones and charger are also included. You can also get the new Apple Care +, which insures up to three breakages (damaged glass, water damage, etc.) in two years.
Hope this helps.

Is there anywhere to report scam emails?

Similar Messages

Maybe you are looking for