Is there aoss on an airport extreme? I thought there was some way via the Airport Utility?

is there aoss on an airport extreme? I thought there was some way via the Airport Utility.

Nothing called "aoss" is on an AirPort Extreme.
Using the Add Wireless Clients feature under the Base Station menu (top of screen) in AirPort Utility - Manual Setup, there are provisions to add a new wireless client using a PIN or allowing the device to connect on "First Attempt".
Whether this is compatible with "aoss", I cannot say. Please let us know about your findings if you try this.

Similar Messages

Moved AirPort Extreme and now it won't connect to the internet

I have moved my base station on previous occassions with no problems--plug and play if you will.
I just moved it to a new location and while the computers in the house recognize the wireless network with no problems, the base station no longer successfully connects to the internet.
I have plugged my MacBook Pro directly to my cable modem and confirmed that the internet still works perfectly well to the house. Plugging that same cable into the base station does not bring the internet up.
I've used the AirPort Utility to act like I'm starting from scratch.
I've chosen Manual configuration and replicated all the data from the MacBook's succesful hookup with no success.
I have manually reset the base station and tried the above again, no success.
Any other ideas? It seems too coincidental to me that there could be an actual hardware issue (everything was perfect right before I moved it (I know, I know--that begs the question, why'd you move it? I should say everything was good, except for one room in the house received a weak signal, so I wanted it to be more centrally located)) that arose just as I moved it. My guess is I just need a little tweak to a setting or something but I can't say I understand what all this DHCP stuff is about.
Thanks for your help!

Most cable modems require that you power them off whenever you switch the Ethernet connection from one device to another. The cable modem will refuse to communicate with the new device if you do not do this.
Did you power off/on the cable modem when you switched the connection from the MacBook Pro to the AirPort Extreme base station (AEBS)?
Some cable modems have a reset switch for this task.
Some cable modems have an internal battery which must be removed to do this reset.
Sometimes the cable modem must be left turned off for several hours or even overnight to reset equipment back at the ISP's office.

I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network. I select Extend Wireless network but have no success. Ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

HT2497 Is there some setting on the airport that stops me from file sharing over ethernet between my macs

I have a Mac Mini from 2013 with OSX10.7.5 and a MBP from 2009 with OSX 10.6.8.
Both are connected with ethernet cables to the Airport extreme (2012) and both have silesharing enabled through afp.
The mac are not showing up on either one of the computers.
Is there some setting on the Airport extreme that dissallowed me from file sharing between computers?
Uptil one week ago I used to connect with wifi on my MBP and before this I was able to see the MBP in the finder under shared computers. The only difference is that I now connect with only ethernet cables.
please help me. Thank you

aksello wrote:
I have a Mac Mini from 2013 with OSX10.7.5 and a MBP from 2009 with OSX 10.6.8.
Both are connected with ethernet cables to the Airport extreme (2012) and both have silesharing enabled through afp.
The mac are not showing up on either one of the computers.
Is there some setting on the Airport extreme that dissallowed me from file sharing between computers?
Uptil one week ago I used to connect with wifi on my MBP and before this I was able to see the MBP in the finder under shared computers. The only difference is that I now connect with only ethernet cables.
please help me. Thank you
The airport could not stop the connection..
In finder set it up manually.. so go.. connect to server.
And type in the address manually.
AFP://Computername
This should then ask for password if required and allow you to see shares.

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

HT4260 I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?

I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?
Appreciate your assistance.

The answer depends on whether the AirPort Extreme is your main router....or...the Linksys device is your main router.
In either case, the two devices must connect together using a wired Ethernet connection using CAT5e or CAT6 cabling.
Any version of the AirPort Extreme produced within the last 5 years will have Gigabit Ethernet ports. In order to get the same speeds from the Linksys router, it will also need to be Gigabit Ethernet capable.
If you need additional Ethernet ports, you will need to add a Gigabit Ethernet switch to either the AirPort Extreme or Linksys router.
It is assumed that your other devices connecting to the AirPort Extreme and Linksys router will also have Gigabit Ethernet capability.
Not sure why you mention "ac" speeds in your post. This relates to wireless connections, not wired.

I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)

I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)

I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable

Airport Extreme Base Station and Multiple Computer Access to the Internet

I have my IMAC connected to the internet via the Airport Extreme Base Station. When I am able to connect, my son's MacBook cannot. If I preform network diagnostics and reset the base station so he can connect (which appears to be luck on my part), I can no longer connect. When I first set this up, I had it working with all computers in the house. I tried to expand the system to boost the signal in our house with the airport express units. I have since removed them and started over, but still cannot provide internet access to more than one computer.
Help

Try this first...
Modem/Router Power ReCycling
- Power-off the DSL/Cable modem, Internet Router, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the DSL/Cable modem; Wait at least 30 minutes.
- Power-on the Internet Router; Wait at least 5 minutes.
- Power-on the computer(s)

Airport Extreme & MacBook & MacBook Pro: only one can talk to Airport

I've got an Airport Extreme is in bridge mode and hooked via an ethernet cable to an SMC router. The SMC device is a wireless (and four wired ethernet ports) router. It's attached via ethernet cable to a DSL modem. All the settings on the Airport Extreme are for the it to be connected to a router and DCHP. I've also got two Airport Expresses to extend the range of the Airport Extreme. I have a Canon printer attached to the Airport Extreme.
In our home we have a black MacBook (10.5.6), a MacBook Pro (10.4.11), Pismo PowerBook (10.4.11), an Apple TV, an iPhone and wireless security web cam.
The problem is that either the MacBook or the MacBook Pro can go through the Airport Extreme to the internet. If the MacBook can go through the Airport Extreme, then the MacBook Pro cannot. If the MacBook Pro can go through the Airport Extreme, then the MacBook cannot.
All computers can get to the Internet via the SMC router wirelessly at the same time.
The Pismo, Apple TV, iPhone and web cam have no problem going through the Airport Extreme to the internet regardless of what's going on between the two MacBooks
No matter what, wireless printing works for all computers.
The MacBook is a "clone" of the MacBook Pro. Internet sharing is on for both MacBooks. Both have unique AirPort ID numbers.
After powering down the DSL modem, SMC router and Airport Extreme and then restarting everything (MacBooks, Airport Extreme, DSL modem) the first MacBook that I use to connect to the Internet always work and the other one never works.
I would like both MacBooks to be able to access the internet via the Airport Extreme.
What is the problem and what is the solution? Any help will be greatly appreciated.
Note: This is a long (years) and ongoing problem and I've posted (over a year ago) before with no luck.

Hi,
"Internet sharing is on for both MacBooks." Why is that? Try to disable Internet sharing on both.
Furthermore I understand that your SMC device is wireless enabled too. Make your configuration more simple by disabling that. Your Airport Extreme can handle that since it is bridged.
See if we can get somewhere.

I lost my phone while it was turned off, so find my iphone doesn't work. Is there anyway that Apple have a failsafe where they can turn the iPhone on so it shows up. The phone hasn't been turned on since I lost it and while I was on the way to the airport

It happened on the way to the airport. I went for my pocket when we were checking in and it wasn't there. I'd turned it off to save battery for the flight and when we got home I checked the house and it wasn't there. I think it may have fallen out in the taxi but we called them and the driver driver said he couldn't find anything. It hasn't been turned on since I last turned it on. But I was wondering can Apple remotely turn my phone on in any way possible?

There is no way of communicating with a phone which is switched off, therefore there is no way to tell it to turn itself on.

There was an error joining the Airport network

Re: error joining the Airport Network
My wife and I bought two new Macbooks at Best Buy on December 28, 2006. On the first day, I set them both up to work with our 2WIRE wireless router, and they both worked flawlessly.
However, on January 27, 2007, my wife started her MacBook, tried to select the wireless router in the Airport drop down menu (like she always has done before with no problem), and received the following error message:
"There was an error joining the Airport network "2WIRE229"
After several unsuccessful attempts to fix this problem by restarting and reconnecting, I did some research on the internet and came across the following discussions from other people who have experienced exactly the same problem:
http://discussions.apple.com/thread.jspa?messageID=3815739

I am having the same problem. I have an access point in my living room and a homework desk in my bedroom. My desk is maybe thirty feet from the access point through one wall. The desk does sit in front of a window. When I try to use my PowerBook at my homework desk I can, intermittently, pick up three access points: mine and two others. The two others are on the same channel as each other, but that should not be interfering with my access point and certainly shouldn't be causing it to disappear from the list all together.
Hoping that my signal just wasn't reaching well enough (the antenna on the AP was not very prominent) I bought a 6dBi antenna for it. My PowerBook has always worked in the living room and certainly works there now. I do get a much stronger signal in my bedroom but I still can't use the laptop on my homework desk.
What doesn't make any sense in all of this is that the wall in my room with the window is the same wall in the living room where there is a large sliding glass door. So, if the interfering signal is coming from outside it should be affecting the living room as well. I am at my wits end on this one.

There was an error joining the airport network "2WIRE532"

I just got my mac back from getting fixed for harddrive problems and now I'm trying to connect to the internet. Before I'd have some problems with losing connectivity but I always could connect. Now as I'm trying to connect to my wireless access point under the list of airport networks, it literally, right after I type in the WEP password, gives me the error message There was an error joining the airport network "2WIRE532". It looks like it doesn't even try to connect as fast as it does it. I need to know what's happening, I really want this mac mini networked to my network on my windows xp os computer.

I'm having the same problem. The only thing that was different was that we installed a new update from Apple for Quicktime.... then the next day it kept asking for a password (it didn't before) and then when it was entered, it gave me the same error message just a different network name.

There was an error joining the Airport network with WEP or WPA

I use a wireless adsl modem router (Philips). I can only connect via wireless to this router without encryption.
As soon as I use WEP or WPA encryption, I get the error message "There was an error joining the Airport network".
Thank you for any suggestion.

Here are some articles that may help you:
http://docs.info.apple.com/article.html?artnum=107938
http://docs.info.apple.com/article.html?artnum=107921
http://docs.info.apple.com/article.html?artnum=304197
http://docs.info.apple.com/article.html?artnum=106424
http://docs.info.apple.com/article.html?artnum=106250
Do not overlook the possibility that the router itself may be incompatible or may require a firmware update to work properly. You should configure the router to use WPA2, preferably, as this is the most compatible form of encryption with Airports.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

There was an error joining the Airport network "NameOfTheNetwork"

Hi there
I am French in London for an internship. I took a flat to share with an other girl. My father advised me to take a Mac for my specific utilisation (internet, music, movies...) and Macs are so cool exept for internet in my case. It doesn't work at all. The network of my landlord is hidden. So, I go in "other", I type manually the network name and the WEP password... Always the same message : There was an error joining the Airport network "NameOfTheNetwork". I tried several times with always the unlucky result.
My landlord said that there wasn't this kind of problem with her other flatmates before me...
I am pratically sure that the problem doesn't comme from my Mac because I reached to join an unprotected other network which appear sometimes (but the signal is not enought strong).
Is there an incompatibility between my Mac and the setup Network? And what do I have to to do to fix it?
I visited a lot of forums but :
1-I didn't find any topics on my specific problem
2-There explanations (when the topic is closed to my issue) are not clear and seem not to correspond to my issue.
Is there someone who can help me please? I really need internet!!!!!
Emma

This confirms it is a WEP issue.
You will need to find the HEX key.
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058

Is there aoss on an airport extreme? I thought there was some way via the Airport Utility?

Similar Messages

Maybe you are looking for