Is there Composite note for Data Transfer?

If it exists, please somebody give me the note no.
Need it urgently.

I guess you are looking for this note having no: 504090
Julius
If so please reward points.

Similar Messages

  • Is there any support for data transfer compression in oracle XE?

    Hi
    Thank you for reading my post.
    I am wondering whether it is possible to ask database and JDBC driver to use some sort of compression for data transfer?
    I want to reduce the network workload as much as possible.
    Thanks

    AFAIK, Not directly from Oracle.

  • SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

    I have a simple column chart grouping on 1 value on the category axis.  For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis.  I right click on the data series and choose "Add calculated series...".  I choose moving average.  I want to move the average over at least 2 periods.
    When I run the report, I get the error "Formula error - there are not enough data points for the period".  The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5).  When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
    I don't think this is entirely acceptable for our end users.  At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart.  Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
    Thank you,
    Dan

    I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
    If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
    <ChartFormulaParameter Name="Period">
                      <Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
    </ChartFormulaParameter>
    What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
    A side note:
    If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

  • HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

    If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
    Or am I missing the bigger picture?

    As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

  • Control parameters for data transfer

    Hi!
    There are no data in SBIW source system - General Settings - Maintain Control Parameters for Data Transfer.
    How does it have an influence on loading data?

    Hi,
    Maximum size of a data packet in kilo bytes
    The individual records are sent in packages of varying sizes in the data transfer to the Business Information Warehouse. Using these parameters you determine the maximum size of such a package and therefore how much of the main memory may be used for the creation of the data package. SAP recommends a data package size between 10 and 50 MB.
    Frequency with which status Idocs are sent
    With this frequency you establish how many data IDocs should be sent in an Info IDoc.
    Standard settings
    Frequency 1 means, for example, that there is an Info IDoc for every data IDoc. In general, you should choose a frequency between 5 and 10 but not greater than 20.
    Recommendation
    The larger the packet size for a data IDoc, the smaller you should set the frequency. By doing this, you make it possible to get information on the respective data load status in relatively short time periods when uploading data.
    Maximum number of parallel processes for data transfer
    Select a number greater than 0.
    Parallel processes can be set from the SAP core release 3.1I onwards.
    These parameters are, therefore, ignored in releases before 3.1I.
    However, there is a possibility of importing the SAP release 3.1I into earlier releases.
    The more parallel processes that can run the better the performance of your system will be. However, you must bear in mind the number of available dialog processes here.
    It will be fine and more effective if you use sap recomended values in those respective fields

  • Need to build communication redundancy using serial RS-232 for Data Transfer b/w Host and RT irrespective of TCP/IP Data Transfer

    Hi - I would like to build the logic in which it should accomodate the communication redundancy using serial RS-232 for Data Transfer b/w Host and RT irrespective of TCP/IP Data Transfer.
    I want to do data transfer b/w host and RT through RS232 VISA portal whenever TCP/IP ethernet cable has been unplugged from the controller continuosly , it should keep on checking for TCP/IP link re-establishing also , when ever the tcp/ip link established again that time the communication should be using in that link only. This is accomplished by deploying the RT vi as execuatbale file. I made some logic regards to the above said logic , bur it was not working as much I expected.
    I request you to go through the attached two VI's and let me know , what I did wrong in that,
    Please do the needful.
    Attachments:
    TCP_Serial_Host.vi ‏33 KB
    TCP_Serial_RT.vi ‏41 KB

    even i am new to this topic and i am trying to get familiar with these protocols
    refer to tcp server/client examples in labview examples

  • [svn:osmf:] 11205: Fix bug FM-169: Trait support for data transfer sample doesn' t display bytes loaded and bytes total for SWF element

    Revision: 11205
    Author:   [email protected]
    Date:     2009-10-27 15:04:26 -0700 (Tue, 27 Oct 2009)
    Log Message:
    Fix bug FM-169: Trait support for data transfer sample doesn't display bytes loaded and bytes total for SWF element
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-169
    Modified Paths:
        osmf/trunk/apps/samples/framework/PluginSample/src/PluginSample.mxml
        osmf/trunk/apps/samples/framework/PluginSample/src/org/osmf/model/Model.as

    The bug is known, and a patch has been submitted: https://bugs.freedesktop.org/show_bug.cgi?id=80151. There's been no update since friday, so I wonder what the current status is, or if it's up for review at all.
    Does anyone know how we can be notified when this patch hits the kernel?

  • JPA - Best Practice For Data Transfer?

    I've been considering an alternative method for data transfer between applications, by using Serialized or Encoded to File JPA Entities. (either Binary or XML)
    I know this procedure may have several draw backs as compared to traditional exported SQL queries or data manipulation statements, however, I want to know if anyone has considered or used this process for data transfer?
    The process would be to
    - query the database and load the JPA Entities
    - Serialize or Encode them to file
    - zip up the entire folder with the JPA entities
    - transfer the data to destination machine
    - extract the data to a temp directory
    - reload the JPA entities by de-serializing and persisting them to the database
    The reason I'm considering this process, is basically because I have a desktop application (manages member records, names, dates, contributions, etc) used by different organisations in different locations (which are not related except by purpose ie clubs or churches) and would like to have a simple way of transporting all data associated with a single profile (information about a member of the organisation) from one location to another in a simple way, ie users interact only with the application without the need for any database management tool or such.
    I'm also considering this because it is not easy to generate an SQL Script file without using a dedicated Database Management Tool, which I do not want the application users to have to learn how to use.
    I would appreciate ANY suggestions and probable alternative solutions for this problem. FYI: I'm using a Java DB database.
    ICE

    jschell wrote:
    In summary you are moving data from one database to another. True
    You only discussed flow one way. Well the process is meant to be bi-directional. Basically what I envision would to have something like:
    - the user goes to File -> Export Profile...
    - then selects one or more profiles to export
    - the export process completes and the zip archive is created and transfered (copied, mailed, etc) to the destination location
    then on the destination pc
    - the user goes to File -> Import Profile
    - selects the profile package
    - the app extracts, processes and imports the data (JPA serialized for example)
    Flow both ways is significantly more complicated in general.Well if well done it shouldn't be
    And what does this have to do with users creating anything?Well as shown above the user would be generating the Zip Archive (assuming that is the final format)
    Does this make the problem clearer?
    ICE

  • E-Rec: XI for data transfer

    Hello Experts,
    I am working on an implementation project where SAP E-Rec is on different box. We are on EhP5. We have XI for data transfer between both the systems (ECC and E-Rec). Now, when we use RFC to connect these systems, we use PA48 in ECC to hire candidates as employees which in turn pulls data from T752F table. Now as we are using XI, how/where does data flow?
    Also, please guide in case candidate is a rehire, how and where to capture his previous perr number to validate candidate is actually an old employee? Instead of T752F, which table is populated which creates an entry in HR admin's UWL. Please help understand.
    Thanks and regards,
    E-Rec Beginner!

    Hello,
    Please have a look at the attachment of note 997181 where the HR integration process is explained.
    Regards
    Nicole

  • Using Nokia 1200 CA45 connection for data transfer

    I have a USB CA45 connector but am unable to connect my 1200 to PC for data transfer. Is this simply because this entry level phone is not able to connect to PC. If so why does it have a CA45 connector installed?
    Any help or advice appreciated
    ottoman62

    About my problem above, i followed the process below which is written in the user guide :
    "So that you can use a connection by cable, a pilot of cable of data USB must be installed on your PC. You can use the Transfert functionality of data without installing of pilot of cable of data USB. Select Menu > Connectiv. > Câble USB. You can connect your apparatus to a compatible PC using a cable of data USB.
    Connect the cable of data USB on the basis of the apparatus. To
    change the type of equipment that you normally connect to your
    apparatus using the cable of data, support on the joystick. [...]
    Transfer of data - Reach data such as audio or photo files on your computer and transfer them since this one by using a connection by cable of data. To use the Transfer mode of data, take care not to select the type of connection USB in
    the parameters Manage connections of Nokia PC Continuation. Insert a memory board in your apparatus, connect this one to a compatible computer using the cable of data USB and, when the apparatus you request to indicate the mode used, select Transfert of data. In this mode, your apparatus plays the part of peripheral of storage of mass and, on your computer, it seems a removable hard disk."
    The USB cable used is a Nokia device.

  • Advantages of using BAPI over LSMW for data transfer

    Hellow,
    Can anybody please give an input for advantages of using BAPIs in data transfer compare to LSMW. If we use BAPI for data transfer of master and transaction data how it is more usefull compare to LSMWs developed.
    Thanks in advance
    Raghav

    Hi Raghavendra,
    Refer the links..may help.....
    [http://www.*******************/search?q=BAPIandLSMW+comparision]
    [http://www.*******************/search?q=bapi]
    Regards,
    Mdi.Deeba

  • The i pod module for data transfer

    Recently i put i pod into enable disk use function so i could use the i pod for data transfer i went into MY computer then located the i pod service module i went to put it onto my desktop but it said module is being used by another program but it isnt atall. When i put in data like my spreadsheets onto the module dragging them it doesnt appear on the i pod module in the i tunes why is that? What do i have to do to make sure i can see that the data is recieved onto the i pod thanks mr roberts

    Hi,
      Retrieve data file from presentation server(Upload from PC)
    DATA: i_file like rlgrap-filename value '/usr/sap/tmp/file.txt'. 
    DATA: begin of it_datatab occurs 0,
      row(500) type c,
    end of it_datatab.
      CALL FUNCTION <b>'GUI_UPLOAD'</b>
           EXPORTING
                filename        = i_file
                filetype        = 'ASC'
           TABLES
                data_tab        = it_datatab  "ITBL_IN_RECORD[]
           EXCEPTIONS
                file_open_error = 1
                OTHERS          = 2.
    Pls reward points.
    Regards,
    Ameet

  • Establish a connection through RF modem's on client & server side & to set up PPP communication for data transfer

    hi
    can any1 over here help me out in how to establish connection between 2 RF modem's for data transfer , between client & server USing LABVIEW?
    I want to establish a connection between 2 PC's through  RF modem on client & server side & to set up PPP communication for data transfer.
    (I have tried data transfer through RS-232 using TCP/IP whn the 2 PC's are connected over ethernet... which is working.
    I also tried connecting loopback cable between 2 PC's COM port & geting data transfer using VIsa configure serial port & other visa functions  ... which is working)
    can u guide me how to establish connection between 2 RF modem's using LABview?
    & how does the data transfer take place between 2 RF modems through RS-232?
    is it using TCP/IP?
    If you got any links to go abt this issue do send me related links .. or any examples .....
    I am currently using Labview version 8.
    Waiting in anticipation.. reply ASAP..
    thanking you
    Regards
    Yogan..

    Howdy yogan,
    Maybe you could clarify a few things for me, and we'll see how we can help ya. TCP/IP protocol occurs through an ethernet connection; RS-232 communication occurs through an RS-232 serial connection, typically through a cable that has a DB9 connector on both ends. Do you mean that the RF modems in question have the option to communicate via RS-232 and/or via TCP/IP ethernet? Specific information like the manufacturer of your RF modems, the model number of your RF modems, and how you connect the modems to the PC would enable us to give you more efficient support.
    You can check our Instrument Driver Network (IDNet) to see if a plug-and-play/IVI driver already exists for your RF modem. (You'll need to know its manufacturer and model number.) In the case that you do find an IDNet driver for your modem, you can use this KnowledgeBase article for instructions on how to use the driver.
    Another excellent resource to consider is the NI Example Finder. You can access this within LabVIEW by navigating to Help»Find Examples and then searching for serial or TCP/IP examples.
    Message Edited by pBerg on 03-10-2008 04:35 PM
    Warm regards,
    pBerg

  • Are there release notes for the new Flex Ajax Bridge?

    Are there release notes for the new Flex Ajax Bridge?

    Hello,
    You can find the release notes
    here
    . The wiki page has been updated as well to point to the release
    notes document, in the Where can I find out more section.
    Thanks for noticing they were missing,
    Cristian

  • Using TCP or shared variable for data transfer

    I am trying to send a large amount of numbers from a real-time module to a host computer.  These numbers have been arranged into a large array, such as an array with 10s of thousands of points.  The time critical portion of getting the information has already been done, so the data transfer back to the host VI is not time critical.  I know I will need to break the large array down into smaller arrays and then reform the large array after all the information has been sent.  I know how to use both TCP and shared variables with FIFO.  What I am unsure of is which one is better to use for this application.  I do not know what the maximum size arrays I can send through either.
    Also, from what I have gathered from using LabView is that the sender has to be listening for a connection before the client opens a connection, or else it will throw an error.  When I tried breaking it down into 50 points, if i did not wait long enough in the host VI or if I did not put a long enough wait function in the RT loop, and error would throw, so it would take a long time to transfer the data when it worked properly.
    Any help or suggestions is appreciated, thanks.

    Regarding the array size question, there is no real limit (other then the amount of memory in your system) to the size of data that you can transfer in a single block using either TCP or the Shared Variable. In your case you can easily transfer an array with 10's of thousands of data points in a single write operation. Both TCP and the Shared Variable will automatically handle breaking up the data for the maximum packet size on Ethernet and then reconstitute the array on the receiving end. In LabVIEW you will simply get back the array as a whole without needing to worrying about how the data is broken into smaller packets on the Ethernet.
    I tested the attached example which transfers 400kB per block (50000 Doubles) without any problems. You do need to have the Server (in this case RT) running first before the client (Windows) can connect.
    Message Edited by Christian L on 02-09-2007 11:34 AM
    Christian Loew, CLA
    Principal Systems Engineer, National Instruments
    Please tip your answer providers with kudos.
    Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
    or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
    to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense
    Attachments:
    TCP.JPG ‏44 KB

Maybe you are looking for