Is there good training/information step-through on using the 3 way color correction in CS6?
I am looking to see if there is a good source of information about how to use the 3 way color correction in premier Pro CS6? It's very complex and daunting when I first look at it, and I would like to figure out how to use it effectively for my underwater footage.
Thanks
FWIW:
Anyone planning on doing CC and Grading should consider learning a bit about color science as regards CC / Grading.
There are many good books from Colorists (eg Van Hurkman or Hullfish/Fowler ) and I am sure there is plenty on th e web about this extensive and interesting topic. A lot of CC info is very applicable and helpfult to photography as well.
These are the fundamentals and basics that apply to all CC/ Grading applications and will make it easy to understand the "controls" as well as the techniques required.
Without the basics...its very dififficult to progress in these apps.
Similar Messages
-
Is there a step by step somewhere for using the iCloud Beta?
Windows 7 64bit / iTunes 10.4.80
Is there a step by step somewhere for using the iCloud Beta? I assume we can activate it after reading Apple advertizing on the Beta and 10.4.80. I don't see anything on iTunes that would get me there - Thank you for your help - IMThank you for the assistance, I greatly appreciate it!
-
Hi,
I have installed Solaris studio and wanted to use the memory analyzer from there. I am trying it on a sample program, but it returns the above error and does not instrument the executable. Could you please help me tracing where am I going wrong.
# which cc
/opt/SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/cc
# /opt/SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/cc -V
cc: Sun C 5.12 SunOS_sparc 2011/11/16
# cc -g -O2 test.c
# file a.out
a.out: ELF 32-bit MSB executable SPARC32PLUS Version 1, V8+ Required, dynamically linked, not stripped
# ldd ./a.out
libc.so.1 => /usr/lib/libc.so.1
libm.so.2 => /usr/lib/libm.so.2
/platform/SUNW,Sun-Blade-1500/lib/libc_psr.so.1
# /SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/discover -w - ./a.out
discover: error: The file /a.out was linked by an older link step. Please use the latest compiler to do the link.
Regards,
Vikkalok. Thanks for the info.
Could you check if a small test works on your system ?
You could use this test :
% cat a.c
#include <stdio.h>
#include <stdlib.h>
int main()
int *x = (int*)malloc(100);
printf("x[0]=%d\n", x[0]);
return 0;
% cc a.c -g -xannotate
% discover -w - -o a.out.disc a.out
% ./a.out.disc
ERROR 1 (UMR): accessing uninitialized data "*x" at address 0x8090008 (4 bytes) on the heap at:
main() + 0xc2 <a.c:8>
5: {
6: int *x = (int*)malloc(100);
7:
8:=> printf("x[0]=%d\n", x[0]);
9:
10: return 0;
11: }
_start() + 0x71
was allocated at (100 bytes):
main() + 0x5e <a.c:6>
3:
4: int main()
5: {
6:=> int *x = (int*)malloc(100);
7:
8: printf("x[0]=%d\n", x[0]);
9:
_start() + 0x71
x[0]=0
***************** Discover Memory Report *****************
1 allocation at 1 location left on the heap with a total size of 100 bytes
LEAK 1: 1 allocation with total size of 100 bytes
main() + 0x5e <a.c:6>
3:
4: int main()
5: {
6:=> int *x = (int*)malloc(100);
7:
8: printf("x[0]=%d\n", x[0]);
9:
_start() + 0x71
DISCOVER SUMMARY:
unique errors : 1 (1 total)
unique warnings : 0 (0 total) -
Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
IP_ADDRESS: 10.0.0.3
IP_SUBNET_MASK: 255.0.0.0
DEFAULT_GATEWAY: 10.0.0.1
TFTP_SERVER: 10.0.0.2
TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: No
TFTP_MACADDR: 30:37:a6:49:35:a8
FE_PORT: Fast Ethernet 0
FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 > " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
IP_ADDRESS: The IP address for this unit
IP_SUBNET_MASK: The subnet mask for this unit
DEFAULT_GATEWAY: The default gateway for this unit
TFTP_SERVER: The IP address of the server to fetch from
TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
TFTP_MACADDR: The MAC address for this unit
FE_PORT: 0= (default), 1
FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
5=Auto (default)
TFTP_DESTINATION: The flash destination device for the file
flash:(default), usbflash0:, usbflash1:
Command line options:
-h: this help screen
-r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
IP_ADDRESS: 10.0.0.3
IP_SUBNET_MASK: 255.0.0.0
DEFAULT_GATEWAY: 10.0.0.1
TFTP_SERVER: 10.0.0.2
TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: No
TFTP_MACADDR: 30:37:a6:49:35:a8
FE_PORT: Fast Ethernet 0
FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick -
I need to bulk upload images from iPhoto to Auctiva (auction software) that will then be posted to eBay; however Java was disabled on my computer some time ago due to "known issues." I have 10.5.8 so does this mean that I can't use Java? If not, then is there a workaround to be able to use the bulk uploader from Auctiva? As it stands now, I have to upload photos individually which is super time consuming.
You can re-enable it for special purposes, opposite of disabling it...
Disable Java in your Browser settings, not JavaScript.
http://support.apple.com/kb/HT5241?viewlocale=en_US
http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets -
Is there a video chat app that can use the Charge's front facing camera?
Is there a video chat app that can use the Charge's front facing camera?
Edit: for video chat between the Charge and a PC.
Thanks!I tried Tango, Qik, and ooVoo.
The only one that can use the Charge's front facing camera AND video chat with a PC is the ooVoo.
Works perfectly!
Tango and Qik ad mobile-to-mobile only at this time.
Thanks!
P.S. .... this really makes me wonder why Skype cannot work with the front facing camera if other
companies can do it on the Froyo? I guess Skype developers are really lazy(or have no incentive
to make it work) -
is the ipod shuffle or nano good for exercise if you just use the clip on the unit, and connect to your shorts? if so, does it feel like it's too loose, might fall off?
I often use my shuffle while exercising, cleaning, and just generally going about my day. Never once has it come unclipped exept for when I got the earbud cord caught on something and got said earbuds yanked out of my ears. I have permanently solved that problem by simply running the cord under my shirt. Works like a charm! I can't answer you about the nano, though I'd say it has a higher likelihood of coming off as it is a bit heavier.
-
My wife and I got iphones. Igot my apple ID set up fine. Having trouble setting up my wifesw. We only have 1 email account. The instructions say to use youe email account as your apple ID. I have done that. My wife tryede to enter the same apple ID. The instuctions say you can. It says press use the same. Then press continue. The only problem is that continue is not an option that is on that screen? Please help me with some good and easy fixes. THANKS
The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895) -
How to cycle through scenes using the up and down buttons??? (Please help, novice!)
Hi,
I'm currently trying to teach myself how to use flash CS5 and actionscript 3 and apart from doing small amounts of programing here and there I'm a complete novice.
I have 36 photographs taken at 10-degree angles, making an object and i have each image in a different scene, with hidden buttons asigned to different parts of the object so that whenever you hover your mouse over them it provides some more information.
What I want to do is to be able to cycle through these images in the different scenes using the up and down buttons on the keyboard.
I'm hoping that I'm at least half way there having assigned the 'hot-spots' but I'm just stuck on the final part... please help!!!!
Many thanks in advance!
HarryIf you are talking about the arrow keys on the keyboard you will have to use a Keyboard Event listener and take note of the constant value for resulting KeyCode
This website seems to have a handle on it:
http://www.republicofcode.com/tutorials/flash/as3keyboard/
There is another method that allows you to listen just to the keys you want (up and down):
http://www.flex888.com/598/using-keycodes-in-actionscript-3.html -
when I open multiple tabs which do not fit the tab strip I have to move through tabs using scroll buttons. is there any way way I can stack the tabs on each other or suggest me a add-on which can help me achieve this
You can consider to access the tabs via the list all tabs button.
You see the "List All Tabs" button in current Firefox versions if there are that many tabs open that you get the Tab bar scroll buttons appearing.
* Permanent List-all-tabs Button: https://addons.mozilla.org/firefox/addon/permanent-listalltabs/
The Custom Tab Width extension adds CSS rules to adjust the tab width settings as set by the browser.tabs.tabMinWidth and browser.tabs.tabMaxWidth prefs on the <b>about:config</b> page.
* Custom Tab Width: https://addons.mozilla.org/firefox/addon/custom-tab-width/
You can achieve the same with code in userChrome.css.
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#tabbrowser-tabs ~ #alltabs-button { visibility:visible!important; }
.tabbrowser-tab[fadein]:not([pinned]) { min-width: 100px !important; max-width: 250px !important; }
</nowiki></pre> -
Modbus connection through ethernet using the NI Modbus library
Hi, first of all I want to say that I'm new to Labview, so I'm in the studying phase and I may have very basic questions.
There's a tool that's basically a big screwdriver with a controller that can be programmed to make certain jobs using desired speed and torque, it's called Handy2000. You can save in different channels the configurations for the different jobs. The controller has its own software, and I can already connect to it and read/write with no problem using an ethernet cable.
I was asked to make an interface in labview to select the channels, show in a graphic way (with photos of the electronic components) what screws correspond to that channel, and show when the steps of a job are done. All of this will be in a panel pc connected to the tool's controller.
Since I'm new to labview and to the modbus protocol, I took some time to study the basics. I understand how the protocol works and the very basics of labview programming, so I have an idea of how the front panel will be and what things needs to be modified. But now it's time to start the implementation, and I'm a little lost on how to make the basic configuration to setup the connection and start writing the addresses on labview. By the way I don't have the DSC module, I only have to use the NI Modbus library.
I already checked the example functions to use my pc as master and slave and watched the codes for the different type of data (coil, input, input register, holding register), but I don't know how I should start programming, and the most important thing is how to make some tests in the process to check that I'm having the communication between the pc and the controller. I already read in the forum and learned a lot, but failed to see as a completely newbie how to make and change the basic setups to make the thing work.
So any help is welcome, specific answers about how to make the basic setup and how to test it, vi examples or basic tutorials to read.
Thanks in advance,
Stefan Christiansen
p.s: I attached the manual that specifies the addresses for the modbus communication, so if you could give me an example of where I should change the address in the labview code and what should I put to make a basic read or write it would be very helpful
Attachments:
Estic Touch Panel Comm. Spec _010-E_.pdf 586 KBI can't even know if it's connected right
First I opened the Master Ethernet Example and the Slave Ethernet Example, and everything worked fine.
Now I tried to do it connected with ethernet cable to the controller using the Master Ethernet Example, and set the "Remote IP Address" to the address of the controller (which I already tested with ping and the connection with my PC is fine, and also I have no problem reading and writing with the controller's software). And when I run it, I get the error 56. The error tells me that it happens at TCP Read in MB Ethernet receive.vi:5. I attached the photo of that vi.
I really hope you can help, I need to establish the connection and being able to read/write at least something.
Attachments:
error56.png 54 KB -
R there any 3g phones or smartphones to use the $10 data packg
I have two upgrades but cant seem to find a phone ...I currently have the samsung rogue...I cant find a new phone that seems equivalant to it except for smartphones and i never use all my 75mb data ..are there some retired 3g or smartphones that can be activated with the small data pack....the basic phones available dont look as good as my rogue....is there a listsomewhere?
Which features in particular are the most important ? And does it need to be a touchscreen non-smartphone or can it be a non-smartphone with a physical qwerty keyboard ?
Because of its AMOLED screen in particular, I'd consider the Rogue to be THE top of the line touchscreen non-smartphone. The only other one with a comparable quality screen is the LG enV Touch, but in my opinion SO many of the customer reviews are so poor that I think a person is taking too huge of a risk in buying one.
The other touchscreen non-smartphones that are RELIABLE and just about as good as the Rogue as far as the rest of the features of the Rogue:
the LG Dare, the LG Versa [which is a touchscreen but has a separate add-on keyboard], the LG Voyager, the Samsung Reality, and the Samsung u370 which is a re-release of the Samsung Reality but without the data-plan requirement
In my opinion, those are the only reliable touchscreen non-smartphones worth considering that I can think of. Sadly, the Samsung Rogue is most probably the last high end top of the line touchscreen non-smartphone that Verizon will allow to be released. phonearena.com has two articles saying that there is supposed to be a successor to the u370 coming out soon called the Samsung Brightside or the Samsung u380. Unfortunately there's been no further word about its release. There's a relatively new basic-feature touchscreen non-smartphone the LG Extravert; now that there's a software update out, the customer reviews at verzion's website make it sound like a reliable phone.
In my opinion, the rest of the touchscreen non-smartphones have way too much probability of being unreliable and buggy:
Microsoft Kin one and two
LG Cosmos Touch
LG Chocolate Touch
LG enV Touch
Motorola Krave
any touchscreen non-smartphone released by Pantech
Samsung Glyde
If you've been pleased with the Rogue and have found it to be reliable enough, maybe you ought to stick with that model and buy another Rogue on ebay
To research any of the discontinued phones, check out cnet.com , phonescoop.com , and phonearena.com
As far as reliable qwerty non-smartphones:
Samsung Alias 2 / Zeal [re-release of Alias 2 but no data plan requirement]
LG env3 and maybe the Octane
The env3 has the potential to have a problem of the battery being loose enough to cause reboots; solution is to place an index card between battery and battery door
Octane: when the phone is flipped closed, the speaker for the ringer is in the inside of the flipped phone which has made the ringer hard to next to impossible for some people to hear -
even do i use the same apple id and password that i use for itunes.
Hi peacegraffiti,
Thank you for using Apple Support Communities.
I understand you are having difficulties restoring your new iPhone from a previous iCloud backup. The following article provides information to help restore from an iCloud backup.
Get help restoring from an iCloud backup - Apple Support
Cheers,
Jeff D. -
Should the ipad be charged while viewing videos through tv using the hdmi adaptor?
or should i allow it to be drained before charging it again?
Go into System Preferences, then Displays. There should be an option to click on the tv mirroring. Click it and see if it connects to the TV.
-
HT5225 IS THERE GOING TO BE A CHARGE FOR USING THE CLOUD
IS THERE A CHARGE FOR USING THE CLOUD?
EaglesPDX wrote:
Answer is yes. iCloud will charge you $40 a year which you cannot cancel. It will show first as "Complimentary" $20 charge for $40 storage and then automatically charge you $40 a year thereafter.
This is incorrect. I hope you did not base it on the misplaced dollar sign in my post in your other thread.
Matt
Maybe you are looking for
-
Data syncup issue - Custom extractor for revenue recognition data from ECC into BW
Hi there, We have created a custom extractor on top of a Function Module (FM) in ECC that reads data primarily from VBREVE table. Currently, we have close to 10 million records and full load isn't a preferred option so we built in a delta mechanism u
-
Is it possible to reduce the size of the address bar? I'm used to full screen in Windows, and I'm trying to get a similar layout with my Mac. Also, I figured out how to hide the dock in the archives via command-option-D, but somewhere along the way I
-
Audio playback from within a state machine without halting execution
I have created a state machine that acquires and analyzes an input signal and transitions states based on triggers detected within that signal. In one particular state I need to play back a prerecorded file (right now I am just using a .wav file for
-
How do I insert multiple IF arguments
Hope I'm using the right terminology here: I grade student behavior around an axis of 0, with 3 and more being very good, and -3 and less being very bad. I want to generate an automatic comment in the next column based on the grade. For example, if t
-
Change MATNR in a Sales Order.
Dear All, Is there any way to change the material number in a sales order? I want to change the number of the material but not the material. That means, the material information will be the same but the number will be different. I want to do that to