IS there is any one successfully executed RFC (sender /Receiver) At PI 7.1

IS there is any one successfully executed RFC (sender /Receiver) At PI 7.1 ? .
if yes can share your experiance.
Thankyou
G.Praveen Kumar
Edited by: praveen.tecnics on May 2, 2009 11:52 PM

>
praveen.tecnics wrote:
> HI Anoop
>
> We are having problems in the communication between ECC 6.0 , PI 7.1 .can you provide the configuration settings for port,logical system,partner profile and rfc destination for both the systems with suitable examples .Looking forward for your reply.
>
> Thanks
> G.Praveen Kumar.
For RFC you dont need all the above
For RFC need only RFC destination of type T to be created in Both ECC and PI ,This is needed only in case of sender RFC adapter
For receiver RFC adapter straight away you can call RFC by providing needed connection details of ECC
Rajesh

Similar Messages

HT204023 hi there can any one help me i have a iphone 5 but my mobile internet not working but i can connect to my wifi no bother

hi there can any one help me i have a iphone 5 but my mobile data is not working but a can connect to my wifi no bother

talk to your carrier about the data subscription and possible settings changes to their apn than

Hi There Can Any one Suggest me Any Discoveror Report?

Hi There,
Can Any one Suggest me Any Discoveror Report with it's name and respective responsibality.
Bachan

Hi William,
I am writting a sample code for you :
go to code wizard, select your node VBAk (where you have the attribute VBLEN )
and select the attribute. Now code will be automatically generated.
 DATA LO_ND_VBAk TYPE REF TO IF_WD_CONTEXT_NODE.
 DATA LO_EL_VBAk TYPE REF TO IF_WD_CONTEXT_ELEMENT.
 DATA LS_VBAk TYPE WD_THIS->ELEMENT_VBAk.
 DATA LV_VBLEN TYPE WD_THIS->ELEMENT_VBAk-VBLEN.
navigate from <CONTEXT> to <VBAk> via lead selection
 LO_ND_VBAk = WD_CONTEXT->GET_CHILD_NODE( NAME = WD_THIS->WDCTX__VBAk ).
get element via lead selection
 LO_EL_VBAk = LO_ND_VBAk ->GET_ELEMENT( ).
alternative access via index
lo_el_VBAk = lo_nd_VBAk ->get_element( index = 1 ).
@TODO handle not set lead selection
 IF LO_EL_VBAk IS INITIAL.
 ENDIF.
get single attribute
 LO_EL_VBAk ->GET_ATTRIBUTE(
 EXPORTING
 NAME = `VBLEN`
 IMPORTING
 VALUE = LV_VBLEN ).
Now based on the value LV_VBLEN select values from database table and fill the internal table.
DATA LT_VBAk TYPE WD_THIS->ELEMENTSVBAk. " this the table to keep the values
select VBLEN ERDAT ERNAM AUDAT from VBAK into table LT_VBAk where VBLEN = LV_VBLEN.
Now you can bind the table to appropriate node.
Regards,
Monishankar C

Hi there. Any one can tell me how erase cookies under the new safari Version 5.1 (7534.48.3)? Any one?

Hi there. Any one can tell me how erase cookies under the new safari Version 5.1 (7534.48.3)? Any one?

Click on the Safari menu then click on preferences the click the security icon.

I am facing problem in using viber...can not receive any call from Viber whn keypad is locked and whn i unlock phone thn on opening viber i can see the missed call notification... kindly guide me there is any setting so0 tht i can receive viber calls

I am facing problem in using viber...can not receive any call from Viber whn keypad is locked and whn i unlock phone thn on opening viber i can see the missed call notification... kindly guide me there is any setting so0 tht i can receive viber calls whn my phone is locked even as i can receive calls on HTC

Hi,
This is an official representative of Viber Media.
Unfortunately we cannot change this feature due to Apple's restrictions. :/
For more questions or technical support, please visit our official HelpDesk.
Thanks,
Viber

There is any built in mechanism that send trap when cabel disconnected?

I have IPMP on solaris 10, with 2 nics.
there is any tool\pkg\ mechanism in solaris that can send snmp trap (to SMU)
when cable disconnected or nic is down?

If you are able, convert your WMV audio to WAV 48KHz 16-bit PCM (the excellent free Audacity can do this).
When importing your assets did you leave PRE alone to complete its conforming? If not try again and leave it to do its thing.
What have you changed in your system since it last worked? You could maybe try a system restore to a time earlier.
Move the Soundtrack Audio to a higher audio track (e.g. Audio 2). Both soundtrack and narration tracks are known to occasionally mess things up - no-one knows why.
If you haven't already work through PrE Hanging, or Crashing - Some Tips.
If that doesn't work take a look at Got a Problem? How to Get Started to see additional information we need about your hardware, assets, and project settings.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Does any one knows BAPI for "Adjust Receivables According" FPRW

Hi All,
Does any one knows the BAPI or function for u201DAdjust Receivables According to Ageu201D
this process runs from FPRW transaction.
Obs> I dont wana events from FQEVENTS !!
Tks,
Every one...

Tks !!
This fuctions works...

Does any one success to install Grid control 11G (OEL x86_64)/Virtualbox

Hi all,
I'm trying since 4 days to install Grid Control 11G with these following specifications:
1) Weblogic 10.3.2 (OK)
2) Database Repository (11.2.0.2) OK
3) Java version : /usr/java/jdk1.6.0_18
4) Operating System Oracle Linux x86_64
And the last news: all this under Virtualbox
Some one can share his experience with us for this purpose.
Thanks in advance
Edited by: 878681 on Aug 12, 2011 4:54 AM

Thanks a lot of,
following extraction from trace file specified:
NB: after each try, the OMS configuration falied with the same error without giving more information.... :-)
I can send the file but i dont khow if it's possible to attach file in this forum...
==================================================================
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Cleaning EM Setup
Script dir: /u01/app/oracle/weblogic/oms11g/sysman/omsca/scripts/wls
Admin host name:gc
Admin https port is:7101
Managed server name is:7403
Admin Server user is:weblogic
Node Manager user is:nodemanager
Mode Passed is:new
Startup mode is:FALSE
managed server name is:EMGC_OMS1
managed server host is:gc
domain name is:GCDomain
machine name is:EMGC_MACHINE1
complete cleanup is:true
Loading the common properties
Loading commen def file
Fri Aug 12 00:57:34 CEST 2011
Fetching oracleHome
Fri Aug 12 00:57:34 CEST 2011
Oracle Home is:/u01/app/oracle/weblogic/oms11g
Fri Aug 12 00:57:34 CEST 2011
Fetching common oracle home
Fri Aug 12 00:57:34 CEST 2011
common oracle home is:/u01/app/oracle/weblogic/oracle_common
Fri Aug 12 00:57:34 CEST 2011
Fetching domain_home
Fri Aug 12 00:57:34 CEST 2011
Domain Home is:/u01/app/oracle/gc_inst/user_projects/domains/GCDomain
Fri Aug 12 00:57:34 CEST 2011
Fetching weblogic Home
Fri Aug 12 00:57:34 CEST 2011
weblogic home is:/u01/app/oracle/weblogic/wlserver_10.3
Fri Aug 12 00:57:34 CEST 2011
node manager home is:/u01/app/oracle/weblogic/wlserver_10.3/common/emnodemanager20110811233403
Fri Aug 12 00:57:34 CEST 2011
admin template location is:/u01/app/oracle/weblogic/wlserver_10.3/common/templates/domains/wls.jar
Fri Aug 12 00:57:34 CEST 2011
Done Fetching passwords
Fri Aug 12 00:57:35 CEST 2011
Done Loading the start Domain routines
Fri Aug 12 00:57:35 CEST 2011
stopManagedServer: Checking Managed server status
Connecting to Node Manager ...
<Aug 12, 2011 12:57:56 AM CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 12, 2011 12:57:56 AM CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 12, 2011 12:57:56 AM CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 12, 2011 12:57:56 AM CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Aug 12, 2011 12:57:56 AM CEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
Successfully Connected to Node Manager.
STARTING
Already connected to a Node Manager
RUNNING
Killing server EMGC_ADMINSERVER ...
Successfully killed server EMGC_ADMINSERVER ...
Already connected to a Node Manager
Stopped NodeManager successfully
Aug 12, 2011 12:58:18 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
INFO: error messages of the command :
Aug 12, 2011 12:58:18 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Done Executing the command...0
Aug 12, 2011 12:58:18 AM oracle.sysman.omsca.framework.OMSGenericAdapter deleteAddOnInventory
INFO: Invoking deleteAddOnInventory for oms EMGC_OMS1
Aug 12, 2011 12:58:18 AM oracle.sysman.omsca.framework.OMSGenericAdapter deleteAddOnInventory
INFO: Deleting plugin inventory for GCDomain_EMGC_OMS1
Aug 12, 2011 12:58:28 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Stopping WebTier
Aug 12, 2011 12:58:57 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Stopped WebTier successfully.
Aug 12, 2011 12:58:57 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Cleaning up instance directory: /u01/app/oracle/gc_inst/user_projects
Aug 12, 2011 12:59:51 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Cleaning up instance home directory: /u01/app/oracle/gc_inst/em
Aug 12, 2011 1:00:56 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
FINE: Succesfully deleted the oms
Aug 12, 2011 1:00:57 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINE: The value of infra setup completion is :true
Aug 12, 2011 1:00:57 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINE: Cleaning the OMS from the repository
Aug 12, 2011 1:01:20 AM oracle.sysman.omsca.framework.OMSGenericAdapter getOMS
FINE: Got hostURL: gc:4889_Management_Service
Aug 12, 2011 1:01:21 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINE: Got the Host URL as: gc:4889_Management_Service
Aug 12, 2011 1:01:21 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINE: Cleaning the OMS from the repository
Aug 12, 2011 1:01:32 AM oracle.sysman.omsca.framework.OMSGenericAdapter cleanupRepository
FINE: Got hostURL: gc:4889_Management_Service
Aug 12, 2011 1:02:23 AM oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
FINE: Succesfully cleaned the OMS from repository
Aug 12, 2011 1:02:23 AM oracle.sysman.omsca.framework.OMSGenericAdapter postDeployAndReposSetup
SEVERE: OMSCA-ERR:Securing of OMS failed. Check the trace file:/u01/app/oracle/weblogic/oms11g/cfgtoollogs/omsca/omsca_20110811233403.log
Aug 12, 2011 1:02:23 AM oracle.sysman.omsca.framework.OMSCAFreshInstall execute
SEVERE: Securing of OMS failed.
Aug 12, 2011 1:02:23 AM oracle.sysman.omsca.framework.OMSConfigAssistantDriver main
FINE: Got resultfalse
=============================================================

Stand-alone ConverterClient (any one successful ???? :-( )

Hi,
I have been trying to run the ConverterClient as a stand-alone application.
After going through several previous responses, I tried various techniques
without any success. The sample code and error message are listed below:
Properties prop = new Properties();
prop.setProperty (Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.cosnaming.CNCtxFactory");
prop.setProperty (Context.PROVIDER_URL,"iiop://<ip address>:1050");
prop.setProperty(Context.SECURITY_PRINCIPAL, "guest");
prop.setProperty(Context.SECURITY_CREDENTIALS, "guest123");
Context initial = new InitialContext(prop);
Objectct objref = initial.lookup("MyConverter");
Error Message:
===========
java.lang.ClassCastException
at com.sun.corba.se.internal.javax.rmi.PortableRemoteObject.narrow(Porta
bleRemoteObject.java:291)
at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:132)
at ConverterClient.main(ConverterClient.java:44)
Environment:
==========
j2sdkee1.3.1
jsdk1.3.1
Windows NT

Thanks a lot Sriram. I spent a whole lot of time trying to understand the problem.
The error reason was: The ConverterClient.class file in jar file and local directory
were not same. By re-creating the jar file, the problem was solved.

Can any one please execute the program in ECC 6.0 - Dynamic Select Dump

Hi,
I am getting dump when I execute the following code in ECC 6.0 with Oracle DB. it works fine in 46, 47 unicode and non unicode and ERP2004.
If I remove the period '.' after '''4500016938''' it works fine. I just want to make sure it is ECC 6.0 issue.
TABLES: EKKO.
DATA L_WHERECOND TYPE TEXT50 OCCURS 0 WITH HEADER LINE.
 CONCATENATE 'EBELN' 'EQ' '''4500016938''' '.'
 INTO L_WHERECOND SEPARATED BY SPACE.
 APPEND L_WHERECOND.
 SELECT SINGLE * FROM EKKO
 WHERE (L_WHERECOND).
WRITE: SY-SUBRC.
WRITE: EKKO-EBELN, ekko-ebeln.
I really appriciate for your help.
Thanks
Swamy

Yes, you do not need the "." at the end. The period is after the WHERE clause
WHERE (L_WHERECOND). "<<---- RIGHT HERE
BTW, got a dump in my ECC6.0 system too.
Regards,
RIch Heilman

Can any one out there tell me how to insert a zoom tool into my slide show in dreamweaver CS5.5

Hi there
Can any one out there tell me how to insert a zoom tool into my slide show in dreamweaver CS5.5
My slide show consists of lots of thumb nails of paintings under a large painting.
When the small painting thumb nail is clicked the large painting appears.
I would like to be able to enlarge all areas of the large painting when a zoom tool is placed over areas of the large painting.
Really appreciate any one help.

Here's the Dreamweaver forum...
http://forums.adobe.com/community/dreamweaver/dreamweaver_general

Any one been successful in ordering a Iphone 5 online and getting to pick it up at the store, how did you do it to be successful?

Has any one successfully purchased an iPhone 5 on line after 10pm and we're successful to be able to pick it up at the Apple store the next day? How did you do it to be successful?

I tried but apple's site keep throwing error while trying to place the order and when I finally able to prcoeed after 15 minutes of trying, all stores near me were sold out. tried it for two nights and gave up. Now ordered online with delivery option.

HI I have an written in tcs in abap plz any one send me questons wht they ?

Hi
I have a written in tcs for abap, Plz any one can help by sending that question
THis is very help ful in my life,,,
thanking U

Hiii Here are some
CERTIFIED Questions...
ABAP CERTIFICATION QUESTIONS
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
78. The TABLES statement declares a data object.
A: True
B: False
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value
Here are some answers...
1 - C
2-D
3-
4-C
5-A
6-A
7-B
8-C
9-
10-C
11-D
13-B
14-D
15-A
16-A
17-
18-A
19-A
20-
21-
22-
23-D
24-A
25-
26-B
27-B
28-A
29-A
30-C
31-C
32-A
33-A
34-A
35-A
36-A
37-A
38-
39-D
40-
41-D
42-
43-A
44-C
45-B
46-B
47-D
48-A
49-A
50-D
51-A
52-B
93rd is ACTUAL parameters

Reward points if helpful...
sai ramesh

Does any one have same problem that can't text on iPhone 4 but can ring ?

Hi there does any one have same problem just brought iPhone 4
And I put SIM card in and finally get service but I can ring people
But can't text as well been told to reboot phone through iTunes
To make it back to a new iPhone settings been told by Vodafone
To do it, but will it work?

RCC0040 wrote:
Hi,
Today I tried to send a normal text message to 2 non iPhones today having sent messages successfully to these 2 phones on nye but neither would send.
So far today I have tried:
1. Calling, receiving calls and receiving texts from these phones works fine, even today
2. Checking the send/ receive has my number in both sections. I have also tried a variety of setting combinations here of imessage on off etc
3. The same with the phone section and my number
4. Installed latest IOS update
5. Restored network settings
6. Turned off and on again
7. Taken sim card out and cleaned it
I would be very grateful of any further suggestions because I'm not sure at all why this isn't working today after not having knowingly changed anything since nye.
Thank you!
Ask your cell phone provider SMS is a carrier feature.

I'm having issues with mac os x 10.7.4 compatibility with audio 4 dj...any one as the same problem?

There's any one that can help me with this issue?

I figured out a solution that works you must disable Online Certificate Status Protocol (OCSP) on the affected system. To do this :
    Open Keychain Access. Keychain Access can be found by selecting Go in the Finder and choosing the Utilities option. Keychain access should be listed in the folder that appears. Double-click the Keychain Access icon to open it.
    Select Keychain Access -> Preferences from the menu at the top of the screen
    Choose the Certificates tab
    Change the OCSP option from Best Effort to Off
    Close the Preferences dialog and quit Keychain Access
    You should be able to NAC now

IS there is any one successfully executed RFC (sender /Receiver) At PI 7.1

Similar Messages

Maybe you are looking for