Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory
Hi
Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process
Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
There are two situations where you can use this depending on the type of client:
1. To keep inventory reports on a client (that is not an MP), create the following file:
%systemroot%\ccm\inventory\temp\archive_reports.sms
2. To keep inventory reports on a MP (that is also a client), create the following file:
<x>:\sms_ccm\inventory\temp\archive_reports.sms
The XML file will be saved in the inventory\temp folder.
More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx
Similar Messages
-
Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?
Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?
Only if this program will get the iPod out of recovery mode.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
Is there any way to save audio attachments from multimedia messages or text messages as ringtones so I can set them to specific contacts on the iphone 3gs??
You have to create iphone ringtones.
There are many free ways to do this. Google will find them.
Click Support and the top of this page, then Manuals, then iphone user guide to find the manual, or look at your bookmarks on the iphone. -
Is there any way to find the serial number of an ipod touch that is no hooked up to the computer? It was stolen and we need the number to give to the police.
If the product was registered, the serial number should be here, under My Products:
https://supportprofile.apple.com/MySupportProfile.do -
i lost my i phone and i cant find him becouse my child close my icloude on the phone funcction , there is any way i can turn it on from my pc ?thanks
No, sorry. The only way to do anything remotely would be to have the find my iPhone setting active in your iCloud account on the device. If that setting has been disabled, then there is no way to track nor to send commands to the iphone remotely (it would be like trying to turn on a light from a switch that has no wires connecting the switch to the light).
-
The phone is physically intact, but you can see the LCD is cracked behond the glass. I have tried plugging it in, tried putting it on the charger, and resetting it using the off and home buttons, bit response. I don't need the phone to work, but I do need to be bale to back it up in order to restore to the new phone. Is there any way to extract the data or back up the hard drive without repairing the phone? Just curious what my options are before I spend cash trying to fix the phone and find out there was another way to get the data. Any thoughts here or should a good repair shop being able to create a backup somehow?
Im not going to be much help because I don't know of anything else to besides take it somewhere that fixes electronics and see if they can get it off some how maybe if you take it to an apple store they can do something to get your information.
-
Hi,
I have a plan of gifting popular gaming app to my user base based on certain criteria.
I'm aware that you can gift the app through itunes.
What i want to know if there is any way to automate the process, like any api calls to gift the app to my user base?
Any sugestion will be most welcome
AffuHi affu_india,
If you are looking to do volume gifting of an app, you may find the following page helpful:
Apple - Business - Volume Purchase Program for Business
http://www.apple.com/business/vpp/
Regards,
- Brenden -
Does anyone know if there's any way to find out what files in my Library
Does anyone know if there's any way to find out what files in my Library I can delete? I just cleaned off my HD onto a media drive as a back up so all my movies documents and photos are gone but my Library seems to be a huge space hog eating sixty gigs of space and I do have alot of apps but they don't take up a third of that space... Any ideas how I can figure out what is wasting all this space? I had Spring Cleaning once but found it to be rather confusing as to what was essential to the OS and what not...
Thanks,
MattGet free OmniDisk Sweeper. I can't imagine how you could have sixty GB in that folder. My entire ~Library isn't even 1GB. Are you sure you're not talking about your entire Home folder?
Can you post a screenshot of the contents of that folder.
Check again. Are you sure you moved all the Movies etc. out? Could have left duplicates of everything behind when you did this.
Message was edited by: WZZZ -
Is there any way to know the T-code from the screen?
Hi friemds,
it s a general question. but I found relavant for posting here.
I saw our group friens giving some T-codes for spro functions (eg: SNRO, M/06), bbut how to know the transaction from path. i.e. If I go to condition types screen, there I could not see any transaction. is there any way to know the T-code from the screen?Hi,
Listed here are the various ways you can find the list of transaction codes and their usage:
Use transaction SE11 - ABAP Dictionary:
Fill in the Database table name and click the Display button.
- TSTC table will contain all the Tcodes and
- TSTCT table will contain all the Tcodes with Texts.
Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
or
Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
or
Goto transaction SE93
There are two ways where you can find the list of transaction codes in SE93.
Method 1:
You must be familiar with the starting characters strings for each of the R/3 application modules.
Assuming you know that most Materials Management transaction codes start with MM.
In the Fields: Transaction code, type in MM* and press the function key F4
The list of transaction code starting with MM will be displayed.
Method 2:
On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
I know a particular T Code and can enter and work on it. How do I know what is the menu path for that T Code?
Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path.
This is helpful only in case of SAP Menu not in case of SPRO - ie IMG.....
Reward if Helpful,
Regards,
Archit. -
I'm wondering if there is any way to view the results of the form other than in a table? Is it possible to print responses one by one in PDF format, or word, etc? I'd like to create a form for proposal applications, and the spreadsheet format results are nearly unusable for this type of form.
Hi Nalani500 ,
Yes, you can print the response in a PDF by following the steps suggested below.
1) Go to the response file
2) Select the response you want to print
3) Click on Save as PDF button and it would save the selected response in PDF format.
Thanks,
Vikrantt Singh -
One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?
Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN
If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN ????
What happened to your metadata? Are you sure the metadata is gone?
In theory, file carving could be attempted on the data LUNs, but you would need a tool that understands how Xsan lays out data across LUNs in a stripe group and hope your fragmentation isn't too bad. I doubt such a tool exists, but if one does it almost certainly is not publicly available. You should probably contact a data recovery service with experience recovering data from Xsan. Do that before you do anything else if this data is really important. -
Is there any way to print the data inside the Notes field of MIR6 Report
Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.
-
I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?
I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time . -
i have an iphone 3gs, and i keep getting blocked number calling me (prank calls) im getting really fed up with it all now i have had 12 calls from the same person! i was just wondering if there is any way i could block this caller from calling me?
Contact your carrier and ask them.
Maybe you are looking for
-
Attachment Content When sending PDF attachment in Send Mail Step
Hi all , I am sending a PDF document which is on the file system using "send_mil" step . It is not executing the send_mil step with out entering anything in the Attachment Content. If i enter some thing , the Send_mil step is executed but the PDF is
-
Converting Word 2007 Styles to PDF
I just upgraded to word 2007. I don't have the PDF Maker for word installed (where you see the Acrobat option on the toolbar in word), and not sure it will install with 2007. So the first question is: Does it? Second question. If you can install PDF
-
HELPPPP!! need converter from mp4 to mp3 or wave
Does anybody knows how find converter for mp4 to mp3, wav, or anything that readable for the car cd player? Thanks Mac Book pro 17 inch Mac OS X (10.4.5)
-
Using row selection in ALV using class cl_salv
Hi, how to use row selection by using cl_salv classes... I need to display scarr table in the basic list in ALV wthout using screens and function modules... On multiple selection of carrid from ALV, need to display flight details from sflight. Also h
-
Oracle patch inst on itanium 64 bit server
Dear All, We are in the process of upgrade from oracle 9i to 10g on itanium 64 bit windows OS. As per latest guide we have completed till page 26/58 and now stuck up with oracle patch installation. As per note 986578 - for itanium server we need to d