Is there max number of switches I can connect to Linksys SD2008? Slow down issues...

I have a SD2008 main 8-port switch. Connected to this, I have THREE 5-port switches from DLINK, each on its own SD2008 port.
1) My DSL provides 10 Mbps maximum.
2) On two of the DLINK switches, I can get 10 Mbps with speedtest.net
3) On third switch (connected last in time), I can only get about 2 Mbps.
4) If I disconnect one of the other two switches, the 3rd slow one now is 10 Mbps.
It seems like there can only be 2 switches connected to the SD2008. Is this true?
If so - is there a new model of switch that I can connect 3 switches to (two 5 ports and one 8 port).

Hi there!
All new Small Business discussions (which includes the model of your product the SD2008) have been migrated to the Cisco Small Business Support Community. All existing Small Business discussions have been archived here for reference. We have made these changes to best serve all Cisco customers now and in the future.
Please proceed here and post on their community instead.
https://supportforums.cisco.com/community/netpro/small-business
Thanks!

Similar Messages

Is there a max number of names that can be put into Contacts

is there a max number of names that can be put into Contacts and still have the app work well?

Yes, there is. It's how many contacts your hard drive can take. So you can fill up the entire computer with nothing but contacts until your HDD/Flash has no space left. So if you have 250GB, it'd be less than if you had 500GB and you'd have more on 750GB.

In Oracle 10g, what is the max number of values we can pass to 'IN' Clause

Hi,
In my SQL query i have a scenario like, i have to pass the values to 'IN' Clause dynamically from other application. I want to know what is the the max number of values i can pass to 'IN' Clause.
i have searched in many pages i seeing answers like 'may be 1000' , 'not sure'....
Could any one tell me the exact limit of IN Clause in 10g.
Thanks in Advance.
Chandran

Hi, Chandran,
Chandran M wrote:
In my SQL query i have a scenario like, i have to pass the values to 'IN' Clause dynamically from other application. I want to know what is the the max number of values i can pass to 'IN' Clause.
i have searched in many pages i seeing answers like 'may be 1000' , 'not sure'....Don't overlook [Dont want to know|http://forums.oracle.com/forums/thread.jspa?messageID=2683385&#2683385]. This may explain why people are reluctant to give a straight answer.
Could any one tell me the exact limit of IN Clause in 10g.1000 items such as IN (1, 2, 3, ..., 1000)
No limit on the number of sets: IN ((1), (2), (3), ...) *<=== NOT QUITE!* See below
No limit in sub-queries: IN (SELECT ...)
Edited by: Frank Kulash on Jun 3, 2009 9:43 AM
The limit of 1000 applies to sets of single items: (x) IN ((1), (2), (3), ...)
There is no limit if the sets contain two or more items: (x, 0) IN ((1,0), (2,0), (3,0), ...)
Thanks to Michaels for pointing this out.
Edited by: Frank Kulash on Jun 3, 2009 10:22 AM
Fixed link

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my wireless network. Is there a limit on the number of devices I can connect to my AirPort? I never have a problem connecting an Apple device (AirBook, iPad, etc).

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my AirPort Express network. Is there a limit on the number of devices I can connect to the wireless network? I never have a problem connecting a new Apple product (AirBook, iPad) and even a basic laptop. Thanks for your help.

The AirPort Express Base Station (AX) can support up to ten (10) simultaneously connected Wi-Fi clients.

Is there a max number of parameters that can be passed to a C function in test stand v. 1.0.1

I have had an issue with test stand version 1.0.1 (yes, I know; it's quite old) and calling a C function thru an action step. when I call this function with 18 parameters, it seems to hang. I have called a function with 16 and it seems to work. Is this a limit of the software? I am calling the function from a windows DLL that we've created. When I try to pull the function from the dll into test stand I also get a { error...but I get that in the other function's call and it seems to work fine. Any ideas?

ok, upon re-reading what I posted I can clearly see your confusion. haha. I think there are two separate issues.
1) Are there a maximum number of parameters one can use when calling a C function from a DLL? Yes, i'm trying to call a C function from test stand.
2) when I select the "module" tab, and select which DLL contains my function, the prototype has no information associated with it (by clicking the reload prototype button). I'm not sure why, as I'm using a declspec to send the function information out of the dll, but that's another topic. So I click on the source file tab and point the window to the .cpp of my function (within the DLL's project workspace) and when it begins to parse the file, I get an error about mis-matched curly brackets and if I wish to continue, and skip the rest of the parsing.
I click "OK" and when I go back to the module tab, I am able to see all my functions, along with the parameters in the drop down menu below. I fill in all the parameters and everything looks ok; no syntax errors, or anything else seemingly suspicious. I then run my test stand code and when I get to the step which calls this function, the system hangs and cannot proceed.
Any thoughts as to what might cause these issues?

Max number of files that can be opened in harddrive through AEBS?

What is the maximum number of files that can be opened in a external hard drive (Lacie 500 GB, USB 2.0) connected through the AEBS? Looks like there is a limit.
When I am trying to 'seed' files through a bit-torrent client (Azureus 2.5.0.4) many of them give an error "Error: too many open files". I never had this error before.
When I tried to delete a file in the hard drive, I got the error "too many open files". Then I stopped 'seeding' in Azureus and I was able to delete the file.

Thanks Chris, it has almost become unwieldy now at this stage ... I'm actually thinking of calling another template for certain sections
I belive this is possible..

In C4: What determines the max number of slide one can successfully publish?

Using C4.
I am required by policy to use an original PowerPoint file. The total number of slide equals 72 (file size 38,201 KB when completed). The internal customer wants a "kicky" presentation based on her slides, so I must use some of the Captivate tools (e.g. zoom area, highlight box -- about the limit of my skills). And there must be spoken narration, not the text to speech feature. Total time for the 72 slides is 22.5 minutes when all is done. When published the narration is good, but the "kicky" part fails. Specifically some highlight boxes do not appear on many slides.
I deleted the table-of-contents feature. The most unusual tools that I'm using are the certificate widget, and a page turning widget.
I tried breaking the presentation into two parts. Part 1 was 58 slides and I experienced the same behavior. I've not tried part two yet.
In the past, I practiced, on my computer, with the aggregator. Is this the best route? We have no experience hosting an aggregator project on our server. Are there any special concerns about doing so? (I'm not the person who does this. He is out of the office at this time). Would daisy-chaining be a better route? (if so, what is the best source for instruction to do this?)

Again, I did not see the elephant in the room. I neglected to notice a default setting. Once corrected, everything works. My bad.
But, I would still like to know what determines the maximum number of slides on can successfully publish without Aggregator or daisy-chaining.

Real-time 8.6 Remote panel connection exceeds max number of licenses- with no connections

I've been using the remote panel right along with no problems to connect to my Compact Fieldpoint. This morning I accidently opened the connection twice on the same computer and tripped the "Remote panel connection exceeds max number of licenses" error. Now it will not let me connect anymore from my computer. I've tried clearing cookies, cache and history in Internet Explorer and rebooting my computer. I've fired up the Remote Panel Connection Manager which shows no connections, and the NI License Information window does not show any connections which have been denied due to max # of clients being exceeded. Is there a way to reset this without having to reboot my RT controller? I'm running RT8.6 and LV 8.6 Full Dev System and understanding that it should come with 1 remote panel license.
Thanks
maat
LV2014

The boss wanted to see an updated feature, so I was forced to deploy a new version and reboot. Problem went away as I suspected it would.
I did manage to make the same mistake again this morning (launch the remote panel in 2 different MSIE windows) and after closing them both I could reconnect. Must be a glitch or a bug? It'd be interesting to see if anyone else has this problem. For now...solved, but it would be nice to see a way to fix this without rebooting.
Message Edited by maat on 10-22-2008 10:10 AM
maat
LV2014

Can connect to Linksys WRT54G but can't get to the internet.

PowerBook G4 17" 1GHz with OS 10.5.4
Linksys WRT54G v8.00.5
SpeedStream DSL Modem
I am having a strange issue. I am able to connect to my wireless network with my PowerBook and can see the Linksys setup page, but I cannot get on the internet. If I bypass the router I can get online with my PowerBook. If I use an ethernet cable connected to my Linksys I can get online with my PowerBook. My Sony Viao can connect wirelessly and get on the internet with no issue. My PlayStation 3 and PSP have no issues. It is solely this machine that is having the issue. I contacted Linksys and went through their troubleshooting to no avail.
Does anyone have any idea as to what the issue may be, or what I can try to resolve this issue? I have done everything I can think of and no luck. Any ideas?

Adam D wrote:
I pinged 208.67.219.99 and the following was returned:
PING 208.67.219.99 (208.67.219.99): 56 data bytes
64 bytes from 208.67.219.99: icmp_seq=0 ttl=47 time=88.752 ms
No error message was returned.
I plugged the IP address into Safari and, although there were 27 errors, the page loaded. I hadn't tried that before. Interesting.
The fact that the ping worked means you are connected to the Internet, and what is likely failing (causing the "You are not connected" message) is DNS name resolution.
DNS name resolution is what converts names like "www.opendns.com" to numbers, like the numbers I gave above, 208.67.219.99.
Changing your system to use the OpenDNS DNS servers, as directed above, will fix the name resolution issue on your system.

New iMovie ? can not fast forward or slow down clips ??

Can anyone help me?
When i try to fast forward or slow down a clip in iMovie i can see the option in "Modify" menu but it does not allow me to select the options

The clip must first be in a Project before you can speed it up or slow it down.
You can't modify a clip when it's just in an Event.
Matt

What is the max number of contacts that can be added to an email?

I'm sometimes sent emails with 1-200 contacts added in. If I try to 'respond to all' iMail just won't send the email back.
What is the maximum number of contacts that iMail can cope with? Is there a workaround for a larger number?
Many thanks
Steve

I'm not sure the point of it as I use a BT push pop3 account?
The point is that these kinds of restrictions are set by your email provider, i.e., Comcast, GMail, etc., not by the Mail application client.
If BT means British Telecom, ask them.

Is there a way to restrict who can connect/find a HP MFP attached to a router.

We have a HP MFP connected to a local network router. I'd like to restrict access to who can print to it. The printer is connected via ethernet. Anyone who has access to our network (wired or wirless) can find/connect to the printer. We only want certain people to have access to it. Is there a way to set up the printer to do this?

Hi rross3,
Depending on which printer you have, this may be possible through the printer's EWS (embedded web server). To access the EWS, open a browser on your computer and type the IP address of the printer into the address field. If you can access the EWS, then check for Settings tab>Firewall Rules. If this exists, you can create a new rule to allow only certain IP's the ability to print to the printer. It would probably be best to assign static IPs to the computers you want to be able to print.
Alternately, if you have access to the network's router, it may have a similar function. You would also want to assign a static IP to the printer (as well as the computers), then allow access to only the computers you want to be able to print (following the same instructions above).
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Is there any "Apps for Office" that can connect to Tabular Model ?

hi to all ,
all the "Apps for Office" that i saw in the "STORE" are using the tables that alrady in the excel ( powerpivot ) , but i need to use those tables which are on the
Tabular Model
, Maybe I'm not looking right , can anyone direct me?
thanks.
yaniv012 from M.S.

Hi yaniv012,
According to your description, you want to find the recently used tables in tabular tables. Right?
In Excel, the My Apps just shows the Apps which are embedded in Office, it's not related to SSAS tabular at all. SSAS tabular is just a BI feature for SQL Server. Excel can just open a connection to SSAS tabular model and import the data into pivot table
report or something else. If you want to see the recently used data. You may see then in the
Recently Workbooks.
Best Regards,
Simon Hou
TechNet Community Support

ITunes limiting number of computers I can connect my iPhone to

I just installed iTunes on my new Dell/Windows 8 computer and tried to sync my iPhone on it. Got a message saying I have used 5 of my available 5 computers. Um, I only use one computer at a time. How can I tell iTunes that the computers I may have sync'ed my phone on years ago are no longer relevant?

See Deauthorize your computer using iTunes and use the deauthorize all option.
See also Recover your iTunes library from your iPod or iOS device.
tt2

How can I stop Layer Comps slowing down Photoshop

Hi all,
This topic has been discussed in other threads, but always without resolution. So as I have just encountered this problem today, I thought I would post the issue again to hopefully capture fresh attention.
I just moved back over from Fireworks to Photoshop, mainly to make use of Layer Comps for displaying multiple states of my UI design. Everything was going swimmingly, but when I reached about 40 layer comps, Photoshop suddenly slowed, or at least the use of the Photoshop file with multiple layer comps slowed. If I try and drag objects/layers, they move painfully slow, making it unusable. If I remove all of the layer comps, everything speeds up again.
I thought there might be a memory issue (as in I had run out!), but if I open two versions of the same file, one with the layer comps, one without, the one without works fine, but the one with the layer comps is slow. If it were a memory issue, surely both files open at the same time would be slow, as would the rest of Photoshop?
I'm not sure how many layers I have, but the file is about 20mb in size, so not huge.
I find layer comps extremely useful for UI design and certainly expected to make use of more than 40. Does anyone know of any fix or anyway of making this work? I wonder if the next CC version of Photoshop will have improved it.
Thanks for any advice you might have.
Alex

Yes, I can't help but feel it is some kind of bug. If it were my PC running out of memory, then I would imagine both open photoshop files would run slowly, rather than just the one with the layer comps (while the other open file runs perfectly).

Is there max number of switches I can connect to Linksys SD2008? Slow down issues...

Similar Messages

Maybe you are looking for