Is there option for resume wizard for internal empeloyee-candidate

Dear,
11.5.10.2
We are going to implement internal-employee-candidate option in i-recruitment module. Right now we are trying to find out any option for an employee to create resume through wizard or preview resume.
Secondly, when employee applies for job but doesn’t reflect his/her previous employer and qualification date as already entered through HRMS.
THANKS.

Dear Siva,
As you mentioned profiles has already been set to the Internal-employee candidate. But still qualification and employer history is not being appeared which has alread defined while createing employee.
Setps ars.
1.Login to Internal-employee candidate
2.Click My Account Window.
3.Click on tab "Qualifications and Skills "
4.Employee History is blank data (already defined in Core HR)
5.Acdemic and Profession Education is blank data (already defined in Core HR)
Any idea.
Thanks.

Similar Messages

TS1574 n in head phone port,no option for internal speakers in option tab

Internal speakers not working, red light in head phone port, no option for internal speakers in option tab. No luck with tooth pick or paper clip.

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
3. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so uncheck it.
    Option click the speaker icon, if present and select Internal Speakers.
4. Launch iTunes and play a song through headphone and adjust the volume

Macbook pro - no audio - no option for internal speakers in sound prefs.

No audio will play from my 2011 macbook pro. It is fully updated. In sound preferences, there is no 'internal speakers' option to select in output, and no 'internal microphone' in input. No red light in headphone jack. Any solutions?

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
3. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so uncheck it.
    Option click the speaker icon, if present and select Internal Speakers.
4. Launch iTunes and play a song through headphone and adjust the volume

Upgrade Options for Internal Hard Drive on dv2000t Laptop (Installation Problems)

I need to replace a failed hard drive in my 2006 dv2000t laptop. The drive I'm replacing was already a replacement drive from the original 80GB drive that shipped with laptop. That first replacement 3 years ago (2008) was a 200GB drive, that worked well for about 3 years. But it just crashed (apparently). I was getting some "S.M.A.R.T" imminent drive failure warnings a week prior, and then it finally would no longer boot-up. Subsequent tests on the extracted drive show it as having many failed sectors.
I had no problem ordering a replacement drive the first time in 2008, restoring an Acronis backup image of original drive, installing it, etc. All went smoothly in 2008. So I assumed all would go smoothly again for yet another replacement and upgrade.
In 2008 the drive I ordered was a W.D. (Western Digital, sticking with the same brand as original) 2.5-in 5400rpm SATA drive (200GB). That was a SATA (I) drive (1.5 Gbit/s interface).
The first drive I recently ordered (Mar 2011) was a W.D 2.5-in 7200rpm 500GB SATA II (3.0 Gbits/s interface) drive (from W.D.'s "Scorpio Black" line.) Got the drive, burned the disc image to it, and popped it into the laptop. Unfortunately, upon startup, and after BIOS screen, all I get is a black screen with a fast flashing white cursor at the top of the screen. Drive apparently is not being recognized by the computer? Then I did some reading in a few on-line forums and found some references about this laptop not doing well with drive capacities over 320GB, nor with 7200rpm drives (because they run hotter than 5400 drives). And finally, references to the SATA interface speed. I ordered a 2nd drive, this one from W.D's "Scorpio Blue" line, this time a 5400rpm 320GB drive (but still SATA II). Same story, still won't work. So I decided that maybe the issue was the SATA speed. So I found someone who still had an older SATA (1.5 GBit/s) W.D. drive in stock . It's a W.D. SATA 250GB (no longer made). It should arrive in a couple days -- and I'm hoping this one works!
I would like to get some kind of confirmation about the blinking white cursor on the black screen on start-up. Is that typicalif the system not finding a bootable hard drive? Also, is this SATA vs. SATA-II issue a likely cause of my problem? I'm pretty sure there's nothing wrong with the new drives themselves, and the restored images on them , as the drives will mount and are accessible when I plug them in as external drives on my other computer.
This question was solved.
View Solution.

I have been able to solve my own hard drive installation problems. It turns out that there were no issues with any of the new replacement drive(s) I ordered (thinking I had ordered drives with the wrong specs). The solution to the problem was a simple one. The restored drives were not booting because there was no MBR (Master Boot Record) on the drives after disc image restoration.
I am using Acronis True Image Home 2011 as my disc imaging (backup) software. And I just didn't understand how to properly restore backed up images to a new hard drive. I had done everything correctly except that I had not checked the box to "restore MBR" -- at the time not understanding what that was or its significance. Once I checked that box, and reimaged the new drive, it worked fine.

Red light inside headphone jack. no option for internal speakers.

what do i need to do?

A toothpick.
Get a toothpick and wiggle it around in the audio out port until you 'flip' the switch for optical/digital out. The red light should go off and you should be able to select your internal speakers again for output.
Seriously. It's worked for hundreds of people.
Clinton

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS. This unit should be joining a Windows Server 2008 R2 network and needs to be shared with all users. This unit will replace a File server running Win 2003 SP2.
Message was edited by: Hermann Koster
Thank you very much for your reply. The idea is to decommission the Windows file server which is running Windows Server 2003 SP2 operating system but is not running as a DC but just a member server. All this server is doing is providing file server services so my idea is to replace it with the NSS 324 box. My only concern is that when my NSS joins the domain all my users would be able to see and access network shares transparently, the same way they saw the former W2003 file server. After I transferred the data from File server I will use the same for NSS that was used for file server as well as same IP address and folders path as before.
Any suggestions or advice?
Once again thank you very much for your reply.
Cheers,

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

Search option for multiple lines in iPad for fixed layout ePub is not working. Is there any alternate way to search multiple lines in ePub?

Search option for multiple lines in iPad for fixed layout ePub is not working. Is there any alternate way to search multiple lines in ePub?

Hi SAP Gurus
I need a big favour, I am trying to map serach string with internal order, my search string is MV-38610573 which I have mapped with posting rule 'GENT' which debits bank account and credit revanue accounts but this revanue account requires assignment with internal order, so I have created another 3 search string with same search string 'MV-38610573' and mapped with BSEG-ASUFNR,60000LC ( internal order),3 (bdc account type) respectively, also maintained three entries in search string use which is for BDC FIELD NAME1, BDC FIELD VALUE 1 & BDC ACCOUNT TYPE 1,
But this is not working it gives me following error,
> Error: (KI 235) Account 4421 requires an assignment to a CO object
Your help will be highly appreciated,

Copa there is a option for reset value field / quantity value filed

Hi
As per the sap standard in copa there is a option for reset value field / quantity value filed. We
use this function to reset a quantity or value field depending on the
billing type (For eg L2 (Debit Memo) G2(Credit Memo). This means that
the condition value set in the field is replaced by value 0. Due to
this quantity value filed in copa reflects nil. My client requirement is when profit center document is generated System should display the quantity as nil.
i have tried some enhancement but these enhancement is only used in case of PGI . But in the case of debit and credit memo their is no PGI. first we create debit not request (va01) then billing(vf01) then document is generated .
Can we do the same thing in profit center Accounting? When PCA document
is generated System should display the quantity as nil.
Please let me know some user exit or substitution or Bte we can use ?
Anjali

hi Jerry,
Very appreciated the link you sent. In this article of this link, it gives an example of a conversion from an external to an internal format:
1. '1234 ' -> '00001234'
2. 'ABCD ' -> 'ABCD '
Just wonder why the external format '1234 ' has to be converted to '00001234', what's the purpose of doing this converstion?
Thanks!

Is there a key on the MacBook Pro to toggle display options for a projector

I have had some difficulty getting my InFocus projector to consistently work correctly with my MacBook Pro. Is there a key on the MacBook Pro that toggles the options for projector display? There was one on my last MacBook and my previous PowerBook.
Thanks -
Dudley Warner

No, there is no longer a key to control external display modes (it's F7 on my 1st gen MBP, but the option was removed along with the embedded numeric keypad in the Early 2008 models). There's not a substitute keyboard shortcut (with the exception of installing a macro player like Keyboard Maestro). Your main option is System Preferences > Displays (as stated, ticking the box to show Displays in the menu bar provides a helpful shortcut).

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
To change the card, go to your account settings and change the information to your new card, and hit save.

TS3899 Hi. How do I attach more than one document to an email on the iPad, especially if they come from different apps? When writing an email on the iPad there's no option for attachments.

Hi. How do I attach more than one document to an email originating from my iPad, especially if the documents come from different apps? When starting an email there's no option for attachments, unless you send the document from inside an app like iBook and then you can only send one at a time.

How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
 Cheers, Tom

I can't sign into iCloud because my Apple ID doesn't work there. For some reason it gave me a .mac email and I don't remember the password. When it gives me the option to reset my password, it's my Apple ID password which I don't want to do.

I can't sign into iCloud because my Apple ID doesn't work there. For some reason it gave me a .mac email and I don't remember the password. When it gives me the option to reset my password, it's my Apple ID password which I don't want to do. I have ended up chaning my Apple ID 3 times lately and I still can't get to my cloud management. What do I do?

Check if your Data and Time, and Time Zone are set to automatically: OS X Yosemite: Set the date and time on your Mac
Is this issue also appearing on new user account:
Isolating an issue by using another user account - Apple Support
Mac OS X: How to troubleshoot a software issue - Apple Support
Is this issue also appearing in safe mode: OS X: What is Safe Boot, Safe Mode? - Apple Support

Where in gods name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but thats is. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC

Where in god’s name is the homesharing button, I see a little cloud that you cannot click on and tells you what account you have but that's it. There's an option for turning on and off homesharing, but no button to access the actual library of the other PC. On either PCs. Both are logged in and both are registered for homesharing. however because apple keeps updating and moving things around for no reason there appears to be no way of accessing the homsharing button in the latest version of itunes. the website refers to " Once set up, all the libraries from your computers you've enabled Home Sharing on will show up in the SHARED area of iTunes:" well I have searched all over in the recent itunes versions and there is no "shared area" to be found.
Please find the attachment of a screen cap of my itunes.
If anyone can help by telling me where it has been moved to or if it even still exists that would be much appreciated.

Welcome to the Apple Community.

How do I set repeating workday events in my calender? There is no option for custom.

How do I set repeating workday events in my calender? There is no option for custom.

The built in Calendar app has very limited repeat options. You might want to try an app like Week Cal which has a much more robust repeating event selection. As it pulls from the same calendar database as the built in, there's no reentering of information required.

Is there option for resume wizard for internal empeloyee-candidate

Similar Messages

Maybe you are looking for