Is there possible to specify the source ip address used for Radius

I have a cat6509 configured to talk to Radius server (ACS), as I understood that the IP address used by Cat6k to talk to ACS is by using the nearest interface ip, can i explicitly specify the source address used by Cat6k in this case ?
thanks in advance.

I am not clear whether you are asking about talking to Radius from the switch or from the MSFC? If it is from the MSFC you are correct that by default it will use as source address the address of the outbound interface. On the MSFC you can use the command: ip radius source-interface to specify what address to use.
On the switch I think that it will source its packets to Radius using the management/console IP address rather than the outbound interface. So no command is needed to specify the source interface.
HTH
Rick

Similar Messages

I need to know how to change the identity (email address) used for the iTunes store as I no longer use that email

I need to know how to change the identity (email address) used for the iTunes store as I no longer use that email.

Settings > iTunes & App store.
Tap AppleID, sign out then sign back in.
The Apple ID is right everywhere else. I've synced the phone. I've reset it in Settings on the phone. I've changed it at Apple.
When you write, "I've changed it at Apple, this means you updated yoru old AppleID or you ceated a new AppleID?

Is it possible to specify which cpu to be used for each session ?

hi ,
like to check if in Oracle , is there any hints to specify the CPU to be used assuming the server have > 1 ?
pls advise
rgds

We may say the degree of parallelism for a query instead - http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/usingpe.htm#i1009828
SELECT /*+ parallel(tab,4) */ ....
Best regards.

Is it possible to specify the window size when using opendocument?

Does anyone know how to specify the window size for a child report launched from a hyperlink that uses opendocument? Is it possible?
I have looked all of the posts I could find and have not found anything that would work, please help.

So I have come up with the following URL based on the suggestions in this post, but it still isn't doing what I would like it to.
It does launch a smaller window but posts the child report in the same window. Is there something else I should do?
Thanks for your help.

Does a method exist in order to take a labview executible and derive the source code VIs used to create it?

Has there been any type of methodology for taking a labview executible and extrapolating the source code VIs used for creating the VI?
Solved!
Go to Solution.

Officially they are embeded in the exe in an undocumented way. So you can't easily get at them. But you can always attach a remote debug session and get into the diagrams that way. That is if the diagrams were not removed during the build, which requires a conscious and extra action by the person to remove the according check mark in the build options of the project. So by default all diagrams are totally gone and are definitely not possible to get back from the executable, unless as smercurio has mentioned your name might be Carnac
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Is it possible to obtain the last IP address from which the device has displayed a message from Find My iPhone ?

Hello, a couple of months ago my macbook got stolen so when yesterday i recieved an email my message was displayed on it i was wondering if there is a possibility to get the last IP address used on that machine .So if there is such possibility could someone direct me how to do it ?

I'm sorry, but I'm still not clear on the problem. Do you mean that you have both "Smith Family" and "John Smith" tied to the same email address? If so, again, that "friendly" name isn't sent to the recipient, so the person receiving the email will get exactly the same thing regardless of whether you select the "Smith Family" entry or the "John Smith" entry. The "friendly" name doesn't go along as part of the email.
It would only matter on your end when looking at your Sent email, and if that's an issue, it should be no problem to select which one you want; just start entering in the email address/name and wait a second; you'll get a dropdown with all the addresses that meet that criteria and you can just pick the correct one.
Forgive me if I'm still not understanding what the difficult is or what you're trying to accomplish.

Is it possible to see the source code

is it possible to see the source code when u know the transaction code for the same?

hi Dhakshu,
it possible,
u run the t.code and there go to system-> status, there u can see the prog name for tht t.code, u double click on tht , u get the source code for thr t.code
\[removed by moderator\]
regards,
chandu
Edited by: Jan Stallkamp on Jun 25, 2008 1:17 PM

ISCSI Initiator favourites revert to using the IPv6 or the apipa IP address from other NICs instead of the source IP address that I specified

Windows 2008 R2
ISCSI Initiator favourites revert to using the IPv6 or the apipa IP address from other NICs instead of the source IP address that I specified.
When I manually connect to multiple targets and specify the correct ISCSI source IP address, I check the favourites and everything looks okay. But when the server is rebooted I check the favourites again and the source IP is now referencing the IPv6 and
sometimes the apipa address.
I have unbound IPv6 from the ISCSI NICS but this has made no difference.
Can anyone explain why this is happening?
Although the server still reconnects to the storage oaky, I’m concerned that if a path goes down that is might try to use the wrong interface to re-establish a connection.
Thanks.

Hi,
IPV6 is supported with MS iSCSI. Do you have Multiple Connections per Session (MCS) configured? Is your storage configured to use both IPv4 and IPv6?
If yes, please see if http://support.microsoft.com/kb/2014131 helps.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to Create a database copy and specify the source database.

Hello,
In my dag environment I would like to create a new database copy and specify the source. My company has database copies in 2 locations. Instead of transferring the data from one location to the other, I would like to specify the source be the copy that is
in the same location.
Thank you,
~Mark

Hi,
We can create a mailbox database, then run EMC and EMS to create a database copy.
More details about Add a Mailbox Database Copy, for your reference:
https://technet.microsoft.com/en-us/library/dd298080(v=exchg.141).aspx
Note: please pay attention to Prerequisites section, for example:
1. The specified Mailbox server must not already host a copy of the specified mailbox database.
2. The server hosting the specified database and the server that will host the database copy must both be in the same database availability group (DAG). The DAG must also have quorum and be healthy.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

My iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!

my iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!
yours sincerly
jackfromsurrey

What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work

Is there possibility to add dimension value into hierarchy using dml or spl

1 Is there possibility to add dimension value into hierarchy using dml or spl?
If such possibility exists how to do that.
2 Is it possible to sort dimension values inside one branch of the hierarchy?

What version of OLAP are you using and how did you create your AW (e.g., AWM)?
Assuming that you're used either AWM or the Java API for AWs in 10g, there isn't an OLAP DML for adding a dimension member to a dimension (and have all the meta data kept in sync); you must load dimension members using AWM the Java API for AWs.
So, make your changes in the the dimension table and process that table.
For sorting, you can add a sort attribute to the dimension. Add the sort attribute to the model, indicate that it's used for sorting, add the sort attribute to your dimension table and maintain the dimension.

User request to explore the possibility of downloading the distribution lists into excel for maintenance in t-code SO23.

Hi Experts,
There is a requirement from user that "To explore the possibility of downloading the distribution lists
into excel for maintenance in t-code SO23 ".
Kindly provide your valuable informations/assistance in this regard.
Madhavan K

This Applesctipt will add comma's to the file count:
(Copy into Applescript Editor, and Save as File Format: App, then just click the App to run)
set x to choose folder with prompt "Choose Folder to Count Files" default location alias (the path to pictures folder as text)
set filecount to do shell script "find " & POSIX path of x & " ! -type d ! \\( -name \".*\" -or -name \"Icon*\" \\) | wc -l"
display dialog "File Count: " & comma_delimit(trim(filecount))
on trim(someText)
          repeat until someText does not start with " "
                    set someText to text 2 thru -1 of someText
          end repeat
          repeat until someText does not end with " "
                    set someText to text 1 thru -2 of someText
          end repeat
          return someText
end trim
on comma_delimit(this_number)
          set this_number to this_number as string
          if this_number contains "E" then set this_number to number_to_text(this_number)
          set the num_length to the length of this_number
          set the this_number to (the reverse of every character of this_number) as string
          set the new_num to ""
          repeat with i from 1 to the num_length
                    if i is the num_length or (i mod 3) is not 0 then
                              set the new_num to (character i of this_number & the new_num) as string
                    else
                              set the new_num to ("," & character i of this_number & the new_num) as string
                    end if
          end repeat
          return the new_num
end comma_delimit

Is there a limit to the number of addresses can I put into a group of multiple users in my address book?

I have just started using Thunderbird and want to set up a number of list groups in my Address Book so that I can simply click on the list name and the email goes to multiple people.
Is there a limit to the number of addresses that I can put into each group? Or, can I put as many addresses into each group as I want to? Thanks for your answer.

Thunderbird has no limit.
See http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Create_Mailing_List

Is it possible to see the photo details (CMD+I for e.g. Aperture, ISO etc.) in fullscreen view?

Based on http://forums.adobe.com/thread/1308132?tstart=0 I decided to add each question seperately:
Hello, I'm quite interested in buying Lightroom 5.2. I tried the RC which ran out now. Yet, I have a several questions that I can't really find good conclusive answers to, that I'd like to get answered before buying LR. Please don't write maybe like this or that (assumptions), since I don't want to start my whole workflow and then realize that I have to change everything around, so please answer, if you know for sure that something works and you are, preferably, using that method too.
Is it possible to see the photo details (CMD+I for e.g. Aperture, ISO etc.) in fullscreen view?

Note that if you invoke Full Screen Preview (F) from Grid Mode, then Cycle Info Display (I) doesn't work at all, no matter how many times you press "I":
http://feedback.photoshop.com/photoshop_family/topics/cylce_info_display_doesnt_always_wor k_in_full_screen_preview
It appears that Adobe originally designed Full Screen Preview to be a special viewing mode of the underlying mode. So if you invoke Full Screen Preview from Grid Mode, Cycle Info Display doesn't work and the arrow keys work with selections just as they do in regular Grid Mode, not as in Loupe Mode. But according to employee Becky Sowada, Adobe is reconsidering this design; see the 9/17 thread in this topic:
http://feedback.photoshop.com/photoshop_family/topics/full_screen_preview_works_incorrectl y_with_selections

Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100

Hi
When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
I took a look at the PPD and found the following:
*%=== Halftone Information =================
*ScreenFreq: "106.0"
*ScreenAngle: "45.0"
*ResScreenFreq 300dpi/300 dpi: "60.0"
*ResScreenAngle 300dpi/300 dpi: "45.0"
*ResScreenFreq 600dpi/600 dpi: "106.0"
*ResScreenAngle 600dpi/600 dpi: "45.0"
*ResScreenFreq 1200dpi/1200 dpi: "180.0"
*ResScreenAngle 1200dpi/1200 dpi: "45.0"
I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
Thank you.
Mark

What was the answer to this excellent question, please?
Mark
Student
Posts: 1
Registered: 05-14-2009
0
Is it possible to customize the halftone screen/angle used by the HP Laserjet 5000/5100
Options
05-14-2009 06:56 AM
Hi
When sending an image to print on our 5000s and 5100s I'd like for the printer to apply a halftone screen of 85 (frequency) and 45 (angle). However, the driver properties only has two settings - Standard and Enhanced.
I took a look at the PPD and found the following:
*%=== Halftone Information =================
*ScreenFreq: "106.0"
*ScreenAngle: "45.0"
*ResScreenFreq 300dpi/300 dpi: "60.0"
*ResScreenAngle 300dpi/300 dpi: "45.0"
*ResScreenFreq 600dpi/600 dpi: "106.0"
*ResScreenAngle 600dpi/600 dpi: "45.0"
*ResScreenFreq 1200dpi/1200 dpi: "180.0"
*ResScreenAngle 1200dpi/1200 dpi: "45.0"
I had hoped that simply by changing the screen frequencies to "85.0" it would do the trick (since 85 does not appear to be outside of the printers' capability). However, it resulted in no changes to the prints. I know (or at least think) the changes were "seen" by the print driver because I changed some of the text that it uses in the property boxes of the print driver and those changes appeared (e.g. I changed "Standard" to "Standard 2" for one of the halftone descriptions).
My question is... can I customize the frequency/angle used or are these values fixed regardless of changes made to the PPD?
Thank you.

Is there possible to specify the source ip address used for Radius

Similar Messages

Maybe you are looking for