Is there problems with the network/signal in TA3 Taunton area

Is there problems with the network/signal in the TA3 Taunton area I have not had a signal all day and then to make contact with one of my children regarding school pick up.

Unfortunately so. Spoke to EE today and the service may take up to 72 hours to get back to normal - which is unbelievable given how much we use our phones for day to day life! As they cannot do anything for us, to thank us for our patience they are asking us to monitor when the service resumes and get back to them (no doubt on their £ per min line) and let them know and they’ll credit us for the down time. Just Brilliant!!

Similar Messages

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H

The problem with the network card.

The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.

Pawełek wrote:
The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.
This confusing which one are you asking about?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Lion: big problems with the network!

Since updating to Lion, I am experiencing difficulties with the network. My Kyocera task alfa 2500 cannot communicate properly with the Mac: it does print but cannot send scan to the Mac, it is just impossible for the printer/scanner to find the Mac. I hear it could be a problem with FTP which is not supported by the new OS Lion. How can I solve the problem?? Or is Apple going to resolve this problem????

Well, the problem relates to the Rosetta program eliminated by Apple in the Lion OS. When you try to rum the KM Scan to Mac.app you get:
"You can't open the application KM Scan to
Mac.app because PowerPC applications
are no longer supported."
So, I guess we (I encountered the same problem) will either have to wait out Kyocera-Mita for a scanner driver app, attempt write a new KM Scan to Mac.app for the Intel Macs; wait for somebody else to WRITE a new KM Scan to Mac.app for Intel Macs or just ***** about it.
Not a rosey situation.

The network backup disk could not be accessed because there was a problem with the network username or password.

Hardware Information:
          MacBook Pro - model: MacBookPro6,2
          1 2.66 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce GT 330M - VRAM: 512 MB
          Intel HD Graphics - VRAM: 288 MB
Startup Items:
          HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
System Software:
          Mac OS X 10.6.8 (10K549) - Uptime: up 0:0:48:37
Disk Information:
          TOSHIBA MK5055GSXF disk0 : (465.76 GB)
                    (null) (disk0s1) <not mounted>: 200 MB
MacBook Pro HD (disk0s2) /: 465.44 GB (440.47 GB free)
          MATSHITADVD-R   UJ-898
Have tried…
re-setting Time Capsule (soft and hard) and power disconnect
re-setting modem
changing passwords in all relative locations
deleteing file://localhost/Library/Preferences/com.apple.TimeMachine.plist
deleteing all mention of Time Capsule in Keychain Access
running KeyChain First Aid (no problem found)
Restarting computer
Time Capsule has a green light, other MacBook Pro backs up OK but this machine continues to receive above error message and will not Enter Time Machine producing the error message Your Time Machine backup disk can’t be found. Maybe I need to do something over or in a particular order? All help is appreciated!

With the TC plugged by ethernet into the computer.. still in full isolation to the network and with factory reset.. you can do another to be sure.
Please open the network preferences.. and check the IP the ethernet is getting from the TC.
It should be 10.0.1.2
I set it to this manually
Don't worry about all the rest.
If you open airport utility can it see the TC?
YES
If not then I think you have a major network issue on the computer.
Assuming you can see the TC in airport utility.. go to manual setup and the disk tab. Does the disk register any issues.. SMART should show it has verified.
Shows verified
Now go to finder..
Mount the drive manually via the top menu.. Go.. Connect to server.
And type in the address.. SMB://10.0.1.1
Did NOT work, however 10.0.1.2 did
That should discover the drive and ask you for credentials which after a factory reset will just be public as the password. The drive should mount and you can then see it in finder.
Yes, but I have been able to do this with the IP address being set automatically
I would deliberately use SMB. The other alternative is AFP://10.0.1.1 but that seems to be more problematic at times..
Once mounted point TM to the drive and see if it can find it and start the backup.. if it fails I think you have need to use the A5 in pondini's troubleshooting and see what you can do.
It failed and A5 makes NO difference.
A drive that won't mount is obviously not going to work.
Pondini is welcome to make comments... sometimes my Mac terminology gets a bit loose.. !! My recent convert status is visible .. !!
My other solutions.. since these are fairly old products.. the TC is more than 3years in all likelihood so outside warranty.. get a USB drive and plug it into the Mac and use TM to backup to that. If that works.. I would erase the hard disk in the TC and start over with both computers.. you will need to backup the other computer before you erase of course. Erasing and starting over does seem to help.
If there are no other suggestions, I guess I will try erasing and starting over. Thank you both for ALL your advice.

I have a problem with the sattalite signals , need...

hello everybody ,
I have a problem with my nokia N95 8g pertaining the sattelite signal for the GPS as there is no sattelite singal at all , it used to be OK before but suddenly there is no singals , I have formatted the mobile but there was no benifit .
Could u pls. help me as I am really deseprate cause I used to use the maps frequently before this problem , and I tried all the ways but no benifit .
Thanks n Rgrds.
THEWOLF777

Delete the ipod updater-redownload it from Apple.
The file you downloaded became corrupted and will not work.

A problem with the network adapter, help please

I have an hp touchsmart pc 600 1040uk and today i woke up to find that the network adapter (nVIDIA) dissapeared and no local area connection. Also i can not connect to the wireless network
I tried everything starting by restarting my router then removing all the cables and retarting the pc. Also tried adding a new device and everything didnt work. I even restored the pc to the factory settings and after starting over new still there is no local area network, just the wireless and bluetooth adapters and the wireless did not connect
Another problem is that when i restored the pc to factory settings the recovery program asked me to backup my pc and I did the backup and saved it in an external hard disk, and now I cant restore that back coz it dosent appear in the window of backups to restore
Plllllllllllllllllllllllllllllllllllllllllease help me, thanks

I found this on another post by "Scott", and it worked.
http://support.apple.com/kb/TS2048?viewlocale=en_US
Sure did take some searching to get to the answer.

Problem with the network (streaming-mirroring)

Hello guys, im really new in this whole posting my questions so hopefully im doing it right.
I have a Apple Tv 2nd gen and it was working like magic untill i changed my network.
I used to have severall routers which meant several networks (more or less) but when i bought the new equipmens I had the great idea to have only one router (Linksys N6500) and a access point that i used as a repeater (TPlink TL-wa901nd) the network works great for the AppleTV and the computers but when i try to mirror or stream any content my computer says that the AppleTV does not exist in the network some times and others it does but when i try to stream it, dissapears.
My guess is that the AppleTV and the computer are connecting to different access points (computer to router - Apple Tv to AP or reverse) and therefore not finding eachother, and i have been trying everything to make them encounter eachother and then stay like that (they miss eachother alot ).
Any opinions
Thanks in advance...

Connecting to different base stations shouldn't be a problem providing your network only has one DHCP server. Have you set your second router up in bridge mode.

Are there problems with the iPod suffle blowing headphones?

I recently purchased an iPod shuffle. After about 2 weeks the headphones went out on me. Thinking I just got a defective pair, I purchased a new set. Not two weeks after purchasing those, this set went out as well.
I don't blast my music, and both times it was the right ear bud that went out.
Thus, does anyone know if there is something defective with the iPod shuffles that cause the right ear buds to blow?
I have tried plugging the headphones into my laptop and yes, it is blown. I was thinking that after the second set of headphones went out, that maybe it was the shuffle itself, but it's not.
Any thoughts will be appreciated.
Thanks!

I recently purchased an iPod shuffle. After about 2
weeks the headphones went out on me. Thinking I just
got a defective pair, I purchased a new set. Not two
weeks after purchasing those, this set went out as
well.
I don't understand why you bought a replacement pair when you could have had Apple replace them under warranty.
I don't blast my music, and both times it was the
right ear bud that went out.
Thus, does anyone know if there is something
defective with the iPod shuffles that cause the right
ear buds to blow?
I have tried plugging the headphones into my laptop
and yes, it is blown. I was thinking that after the
second set of headphones went out, that maybe it was
the shuffle itself, but it's not.
Any thoughts will be appreciated.
Are these Apple earphones, or some other brand?

Is there problems with the h:inputSecret ?

When I try to use the tag inputSecret I realize that doesn't run well.
If I put..
<h:inputText size="15" value="#{user.pwd}"></h:inputText>
<h:inputSecret size="15" value="#{user.pwd}"></h:inputSecret> The first one appears with the password with normal letters, but the second one... appears empty! Why!?
Thanks in advance

you need to add redisplay="true" to the <h:inputSecret> tag. It should look something like this:
<h:inputSecret size="15" value="#{user.pwd}" redisplay="true"></h:inputSecret>

Problem with the network

sorry for my inglish :oops:
1.- i install the base system and then rp-pppoe
2.- run adsl-setup and the user name, passwd
3.- i try adsl-start but time out
4.- try modprobe 8139too but time out agin
what i can do ????
the version is arch0.5.

im using 0.5 because i don´t have enouth time for download the last version
about the problem, add that in rc.conf, "8139too", and "alias eth0 8139too" in modules.conf, but, nothing hapend
the time outis when try with "adsl-start", if try with "/etc/rc.d/adsl start" then BUSY, "/etc/rc.d/adsl stop" FAILED.
only with gentoo(give up) and now arch happend this problem :?

Are there problems with the 5g nano and previous games?

I just got the 5g nano to replace my video and i bought two 99 cent games because well, they were only .99. Chinese Checkers and Reversi. When i play the game, the screen keeps shifting. Before you say you are rotating it and the accelerometer is detecting it, this happens when it is laying flat on the table without me touching it. I'll make my move, and then the other people will go, and then it will point to my item that i want to move, only its not in the position its pointing at. If the board were flipped it would be correct. Kinda hard to explain, but if it happens to you, you will understand.

What are the system requirements of the games you purchased? Game compatible with 5th gen nano?
Apple is not going to respond here because this is a user to user message board. If you found no help on Apple's message board, iPod PDF user manual or Apple's Knowledge Base, every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. Take advantage of it. If you have AppleCare, call them.

I can't call anybody, but I can receive calls. There's no problem with the sim card, and no numbers are blocked. Help me.

When I try to call, the call always failed.

From a different phone, call your cellular carrier. They need to get involved.

I have a problem with the network on iphone 3gs, even when I can not call you ring someone

bejtush.k

If I understand correctly, you are in Romania and the phone was bought from Sweden. In order to unlock that device, you have to have the carrier in Sweden unlock it. If your phone just won't power on, then wjosten has provided the steps needed to try and power it on. Otherwise, if you want the phone "unlocked" or if it has been "jailbroken" or an unauthorized version of software has been put on the iphone, nobody can help you here.

I click on a link inside an email and it won't open so I can print the coupon, response is http error 400 or I have it blocked. Others in my area aren't having any problems with the same link opening but they are using IE. What's up with Firefox?

gohollywood.com, register, message came back from Hollywood Insider with a link to click on to "Download Coupon". Click on link and you should get the coupon and you print it out. All my friends have done it but I can't. I get various error messages including : "HTTP error 400 - the request is badly formed".... or you have a blocker set.....
Unless it is a Gmail/Firefox blocker or firewall, I don't have anything set up as a blocker on my email. Had a few friends go in my account on their computers and they had the same thing happen. However when they go in under their names they get to the link with no problems. HELP.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Is there problems with the network/signal in TA3 Taunton area

Similar Messages

Maybe you are looking for