Is there really still only one range key for partitions?

Hi All,
I had need to look up the manual on partitioning functions. 
The manual reads like there is still only one field available to define as the partition key with left and right for placement.
Am I reading this right? That MSFT have not yet enabled multi field partition columns?
I just want confirmation because I can barely believe it.
https://msdn.microsoft.com/en-us/library/ms187802.aspx
Thanks in advance.
Peter Nolan

Hi peternolan9,
Based on my research, the partition function has to be defined on a single column, it doesn’t support multiple columns.
To work around this issue, we can use computed column option that is a combination of the multiple columns we're trying to partition by. If you don’t care a rare incorrect partition, then we can also use Checksum.
The following similar threads are for your references:
http://stackoverflow.com/questions/4671161/table-partitioning-using-2-columns
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/cf652647-a804-48e9-9d41-9cda0a2aff77/sql-2008-support-for-multiple-column-partitioning?forum=sqldatawarehousing
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

  • HT1171 I have the apple wireless key board.  There is only one delete key and it deletes all data to the  left side of the cursor.  Where is the delete function for deleting letters that are on the RIGHT side of the cursor?

    I have a new wireless apple keyboard. I can only delete items that are to the left of the cursor using the delete key.  What key do I use to delete items that are to the right side of the cursor?  I have only one delete key.
    My old apple wired keyboard has 2 delete keys that enabled me to easly delete data on either side of the cursor.
    Thanks

    Fn + Delete

  • Hi, I have apple account/password on laptop but can't use the same ID etc on new Ipad.  On my account it says ID is only for 1 system.  I really want only one ID for both Ipad and laptop. Thanks

    Hi,
    I have apple account/password on laptop but can't use the same ID etc on new Ipad.  On my account it says ID is only for 1 system.  I really want only one ID for both Ipad and laptop.
    Thanks

    It seems that you have used the AppleIDs to "Purchase" your devices, which marries the two for all time and eternity.
    For info - Using your Apple ID for Apple services
    For Account security issues - Apple ID: Contacting Apple for help with Apple ID account security
    regards
    CCC

  • I need to work on two computers , can I install the cloud in two computers with buying only one product key ?

    I need to work on two computers , can I install the cloud in two computers with buying only one product key ?
    If yes, is the setting up procedure same as before?
    Thank you so much.
    Kenny

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each
    -Both computer Cloud subscriptions may not be in use at the same time

  • Error-"There is still a purchase requisition commitment for ORD #########."

    Hello All,
    I am trying to set deletion flag an internal order using transaction KO02 and am receiving an error "There is still a purchase requisition commitment for ORD #########."
    1> What does this mean.
    2> How can I solve this problem
    Moosa

    Hello Moosa,
    When you want to close an order, the system checks for dependanting data
    to alert you that there are open items that have not been received, etc.
    You need to close the purchase orders and requisitions so that the  order is no longer "expecting" postings from these dependant objects.
    Please consider running the following reports which have been known to correct inconsistencies in commitments:
    Report RKANBU01 resets commitments on orders and ranges of orders.
    (See note 100409) (Note 125266)
    Reports ZKAOIDE0 & ZKAOIDE1 removes commitments which refer to purchase orders and purchase requistions which do not exist.
    (See ANote 100409)
    Report RKACOR04 corrects mistakes between total and line items in
    database tables. (See Note 113423)
    I would recommend implementing these programs in a test system first.
    You may also want to consider Notes 152571 & 157369 if you are receiving error messages KO447 and/or KO448 when attempting to delete/close the order.
    Best Regards,
    Gladys xing

  • There is still a purchse order commitment for ORD X for CO_ORDER archiving obj

    Dear Experts,
    I am facing issue for CO_ORDER archiving object. I am getting error saying like
    " there is still a purchase order commitment for ORD 200060" and
    "order 200060 still has at least one purchase order that you need to do".
    screen shot attached for reference
    so Please help me to solve this issue.
    Thanks in advance,
    Ningappa S M

    Hello Manju Sir,
    Now that issue setting of deletion indicator is got successful. I mean I set residence time 1 as 0 and I tried to archive and I got successful. but I am facing the issue saying " there is still a purchase order commitment" , "there is a still Purchase requisition assigned to order" and
    "still has at least one purchase order that you need to delete" etc for all orders when i set residence time 1 as 39 months (even i tried by setting the residence time 1 as zero i am getting the same error messages) and residence time 2 as 0. for these orders deletion flag itself is not getting set. so please help me for this.
    Thanks,
    Ningappa

  • Fbl5n: The printer provides me only one customer items for each page...

    Hi all,
    launching t.code FBL5N, and printing the repost list, the printer provides me only one customer items for each page...
    I'd like obtaining more customer items for each page...
    What to do?
    Thanks

    Hi Umberto..
    Thats how the standard report works..
    To meet your requirement, you would probably need to look at another standard report.
    In case you need further clarification, please feel free to write to me..
    Good Luck!
    Lucid-Mind...

  • How i can have only one Apple ID for everything my computer and tab and iphone?

    How I can have only one Apple ID for evrything, my computer Iphone

    Thats how the majority of people use iCloud. All you need to do is sign into the same account on all of your devices.

  • There is still a purchase order commitment for WBS

    Hi All,
    We need to close  whole project while closing I am getting the attached error.
    There is still a purchase order commitment for WBS
    Additional Information or Comments: = I have checked and closed all purchases order commitment. But still the project shows the below error     .
    Edited by: nandhasapfi on Sep 22, 2011 10:52 AM

    Hello,
    This message is being output correctly as the AuC still has
    values against it.
    These values must be cleared before you can close the WBS element.
    Please do a FUL settlement against the WBS element to clear
    these values and then try to set the CLSD status again.
      There are two ways to 'clean' the AuC, so that you can deactivate it
      and close the wbs element:
      1. Post a manual retirement of the AuC to clean it.
      2. Create a new AuC and use it for all the differences in the final
         settlement.
    I hope this helps,
    regards
    Ray

  • Only one Apply button for Dashboard Prompt in obiee

    Hi experts,
    We have a need wer we need to place prompts at specified places like one at right top then next 3 one below other. But only one Apply button.
    Please let me know how to customize OBIEE 11.1.1.5 to achieve this.
    Thanks in advance.

    Hi,
    You are using OBIEE 11g ,so constrain the second report should be on the first prompt.I mean,In the second prompt properties we have an option like "based on the other prompt";where you need to give the first prompt column name.like wise third prompt also.
    Then you will get only one apply button for 3 prompts.
    mar if helpful/correct..
    thanks,
    prassu

  • Why is 1080i the only one that works for my slideshow.

    Well... I'm getting to my breaking point.
    First my system.. Mac Pro 2.66 2x300gb raid 0. x1900 ACD 30
    5gb Ram
    I have read many many posts.. but I still need your help.
    I have found that the only thing that gives me a marketable slideshow in terms of quality images is to make a slideshow in imovie under 1080i.
    The problem with this is that it really really slows my computer down, and I don't want to do this with a slide show of about 150 images per client, and then have wait more for transistions.
    Shouldn't I start a new slideshow in "DV" setting for a 4x3?
    I have tried reducing res from 10.2 mp to a 1024x??? settting for images (depending on orientation). All I seem to lose here is a bit of sharpening as I reduce the image resolution, which makes sense if I understand correctly.
    So... Where to go from here.
    I read the posts.. and have determined that I can use Photo to move (which I have) to make clips and import them into Imovie. Again, a slow process as each clip has to be done seperatly. Is there another way with PTM, because it does render the best Ken burns effect I have seen. Again 150 images is too long to wait to make a slide show of a wedding, not cost effective for me.
    Hope someone can help.

    Anyone??
    When I make a movie in 1080 or 720.. it takes alot of resources and slows things down.
    Just wondering why choosing those options are the only ones that seem to work
    I really need to get it into 4x3 format too.

  • HD slideshow is the only one that works for me.. WHY??

    I have a new mac pro with lots of hd and ram 5GB.. so I don't think its my system.
    What I need to know is that I can make an acceptable slideshow if
    1) I lower the resolution of my photos from 3884x2600 to about 1024x1024
    2) I create a imovie 720hd or 1080i HD.
    ANY other format creates a lousy final picture quality when viewed on the TV. I get a shimmering, but not so noticible jaggies as some have posted. If I keep the photo still and not use KB.. the still images are ok, but not fantastic. The KB kills them. This seems opposite of what I have read of the bug in imovie6.
    Can anyone explain why if I use the HD formats for Imovie the photos turn out ok?
    I would like to keep them in a 4x3 format but can't if I use the HD formats. Is there a way to make it 4x3 after?
    Anyway.. I have done a lot of testing and this is the best I can get so far.

    Anyone??
    When I make a movie in 1080 or 720.. it takes alot of resources and slows things down.
    Just wondering why choosing those options are the only ones that seem to work
    I really need to get it into 4x3 format too.

  • How to create one primary key for each vendor

    Hi all
    i am doing IDOC to jdbc scenario
    i am triggering idoc from R/3 and the data is going into DB table vendor through XI.
    structures are as follows:
    sender side: ZVendorIdoc (this is a customized IDOC , if i triger IDOC for multiple vendors then it triggers only 1 idoc with multiple segment )
    Receiver side:
    DT_testVendor
        Table
            tblVendor
                action UPDATE_INSERT
                access                     1:unbounded
                    cVendorName         1
                    cVendorCode        1
                    fromdate                1
                    todate                    1
                 Key1
                    cVendorName         1
    if i trigger idoc for multiple vendors ,for example vendor 2005,2006 and 2010 . then i can see that the only key comes from the very first field (2005) and the whole record for vendor 2005,2006 and 2010  goes into the table with this(2005) as a primary key
    now again if i send data for these three vendor 2005, 2006 , 2010, in which record for the vendor 2005 is same and for 2006 and 2010 are different than it takes 2005 as a primary key and it does not update the data in the table.
    my requirement is like this:   for each vendor there should be one unique key assigned.
                                              for above said example there should come three keys one for each vendor .
    could you please help me how to do this???????????

    Hi,
      In Mapping Make the statement is 0-unbounded.For each vendor create a statement.This will solve your problem.
    Regards,
    Prakasu.M

  • Only one X session for all normal users combined possible

    Hi, I'm currently experimenting with the new xorg-server 1.16 with which it is possible to start and run the X server as a user.
    Setup: No display manager running. startx is used. No modifications of global xserverrc or other files.
    ~/.xinitrc looks like this for all users:
    startxfce4
    As root it is possible to start multiple X sessions (on different virtual terminals of course).
    But as a user only one X session is possible.
    After user flo has started a X session on tty1, the following occurs:
    Permissions for tty2 before startx
    crw------- 1 boolian tty 4, 2 24. Jul 10:24 /dev/tty2
    If I try to start a second X session via startx on another virtual terminal (here: tty2), the process aborts with the following message:
    X.Org X Server 1.16.0
    Release Date: 2014-07-16
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.15.1-1-ARCH x86_64
    Current Operating System: Linux flo.tower 3.15.6-1-ARCH #1 SMP PREEMPT Fri Jul 18 07:06:42 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
    Build Date: 18 July 2014 07:12:40PM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/home/boolian/.local/share/xorg/Xorg.1.log", Time: Thu Jul 24 10:24:21 2014
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (EE)
    Fatal server error:
    (EE) xf86OpenConsole: Cannot open virtual console 2 (Permission denied)
    (EE)
    (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    (EE) Please also check the log file at "/home/boolian/.local/share/xorg/Xorg.1.log" for additional information.
    (EE)
    (EE) Server terminated with error (1). Closing log file.
    xinit: giving up
    xinit: unable to connect to X server: Connection refused
    xinit: server error
    After this unsuccessful call to startx, the permissions for the tty2 have changed, but only the owner not the rwx flags.
    crw------- 1 root tty 4, 2 24. Jul 10:24 /dev/tty2
    Interestingly the permissions for the tty with the running X server stay as expected all the time.
    crw------- 1 flo tty 4, 1 24. Jul 10:37 /dev/tty1
    My first guess was, that the suid bit of Xorg.wrap has something to do with it. But I moved the binary and the behavior stayed the same.
    Another guess is, that systemd-logind has something to do with it as it is repsonsible for the permissions (see [0] and [1]).
    Can anybody reproduce this behaviour?
    Has anybody hints where to go next? I'm currently building a new kernel with the audit framework enabled to check which process changes the permission of the tty when startx is called.
    I'm reluctant to open a bug report as I know too little about the problem or whether it is a bug at all.
    Greetings.
    [0]http://dvdhrm.wordpress.com/2013/08/24/ … -on-linux/
    [1]http://dvdhrm.wordpress.com/2013/08/24/ … ing-works/

    I have captured all systemcalls which go to /dev/tty2 (which is dev with major 4 and minor 2) with the following auditctl line:
    -a always,exit -F arch=x86_64 -S all -F devmajor=4 -F devminor=2 -F key=vt2222
    This is the result:
    [root@flo rules.d]# ausearch -i -k vt2222
    type=CONFIG_CHANGE msg=audit(24.07.2014 13:19:49.400:83) : auid=flo ses=1 op="add rule" key=vt2222 list=exit res=yes
    type=PROCTITLE msg=audit(24.07.2014 13:19:53.749:84) : proctitle=/sbin/agetty
    type=PATH msg=audit(24.07.2014 13:19:53.749:84) : item=0 name=/dev/tty2 inode=24 dev=00:05 mode=character,620 ouid=root ogid=tty rdev=04:02 nametype=NORMAL
    type=CWD msg=audit(24.07.2014 13:19:53.749:84) : cwd=/
    type=SYSCALL msg=audit(24.07.2014 13:19:53.749:84) : arch=x86_64 syscall=stat success=yes exit=0 a0=0x6665a0 a1=0x7fffea504e50 a2=0x7fffea504e50 a3=0x666590 items=1 ppid=1 pid=5903 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=tty2 ses=unset comm=login exe=/usr/bin/login key=vt2222
    type=PROCTITLE msg=audit(24.07.2014 13:19:53.749:85) : proctitle=/sbin/agetty
    type=PATH msg=audit(24.07.2014 13:19:53.749:85) : item=0 name=/dev/tty2 inode=24 dev=00:05 mode=character,620 ouid=root ogid=tty rdev=04:02 nametype=NORMAL
    type=CWD msg=audit(24.07.2014 13:19:53.749:85) : cwd=/
    type=SYSCALL msg=audit(24.07.2014 13:19:53.749:85) : arch=x86_64 syscall=lstat success=yes exit=0 a0=0x6665a0 a1=0x7fffea5050c0 a2=0x7fffea5050c0 a3=0x7fffea504d00 items=1 ppid=1 pid=5903 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=tty2 ses=unset comm=login exe=/usr/bin/login key=vt2222
    type=PROCTITLE msg=audit(24.07.2014 13:19:53.749:86) : proctitle=/sbin/agetty
    type=PATH msg=audit(24.07.2014 13:19:53.749:86) : item=0 name=/dev/tty2 inode=24 dev=00:05 mode=character,620 ouid=root ogid=tty rdev=04:02 nametype=NORMAL
    type=CWD msg=audit(24.07.2014 13:19:53.749:86) : cwd=/
    type=SYSCALL msg=audit(24.07.2014 13:19:53.749:86) : arch=x86_64 syscall=access success=yes exit=0 a0=0x6665a0 a1=W_OK|R_OK a2=0x7fffea5050c0 a3=0x7fffea504d00 items=1 ppid=1 pid=5903 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=tty2 ses=unset comm=login exe=/usr/bin/login key=vt2222
    type=PROCTITLE msg=audit(24.07.2014 13:19:53.749:87) : proctitle=/sbin/agetty
    type=PATH msg=audit(24.07.2014 13:19:53.749:87) : item=0 name=(null) inode=24 dev=00:05 mode=character,620 ouid=root ogid=tty rdev=04:02 nametype=NORMAL
    type=SYSCALL msg=audit(24.07.2014 13:19:53.749:87) : arch=x86_64 syscall=fchown success=yes exit=0 a0=0x0 a1=0x0 a2=0x0 a3=0x7fffea504d00 items=1 ppid=1 pid=5903 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=tty2 ses=unset comm=login exe=/usr/bin/login key=vt2222
    type=PROCTITLE msg=audit(24.07.2014 13:19:53.749:88) : proctitle=/sbin/agetty
    type=PATH msg=audit(24.07.2014 13:19:53.749:88) : item=0 name=(null) inode=24 dev=00:05 mode=character,620 ouid=root ogid=root rdev=04:02 nametype=NORMAL
    type=SYSCALL msg=audit(24.07.2014 13:19:53.749:88) : arch=x86_64 syscall=fchmod success=yes exit=0 a0=0x0 a1=0600 a2=0x0 a3=0x7fffea504d00 items=1 ppid=1 pid=5903 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=tty2 ses=unset comm=login exe=/usr/bin/login key=vt2222
    type=PROCTITLE msg=audit(24.07.2014 13:19:53.749:89) : proctitle=/sbin/agetty
    type=PATH msg=audit(24.07.2014 13:19:53.749:89) : item=0 name=/dev/tty2 inode=24 dev=00:05 mode=character,600 ouid=root ogid=root rdev=04:02 nametype=NORMAL
    type=CWD msg=audit(24.07.2014 13:19:53.749:89) : cwd=/
    type=SYSCALL msg=audit(24.07.2014 13:19:53.749:89) : arch=x86_64 syscall=open success=yes exit=0 a0=0x6665a0 a1=O_RDWR|O_NONBLOCK a2=0x7f7a7bb9edf0 a3=0x7fffea504ce0 items=1 ppid=1 pid=5903 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=tty2 ses=unset comm=login exe=/usr/bin/login key=vt2222
    type=PROCTITLE msg=audit(24.07.2014 13:19:54.409:91) : proctitle=/sbin/agetty
    type=PATH msg=audit(24.07.2014 13:19:54.409:91) : item=0 name=(null) inode=24 dev=00:05 mode=character,600 ouid=root ogid=root rdev=04:02 nametype=NORMAL
    type=SYSCALL msg=audit(24.07.2014 13:19:54.409:91) : arch=x86_64 syscall=fchown success=yes exit=0 a0=0x0 a1=0x3e8 a2=0x5 a3=0x683ce7 items=1 ppid=1 pid=5903 auid=flo uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=users fsgid=root tty=tty2 ses=15 comm=login exe=/usr/bin/login key=vt2222
    type=PROCTITLE msg=audit(24.07.2014 13:19:54.409:92) : proctitle=/sbin/agetty
    type=PATH msg=audit(24.07.2014 13:19:54.409:92) : item=0 name=(null) inode=24 dev=00:05 mode=character,600 ouid=flo ogid=tty rdev=04:02 nametype=NORMAL
    type=SYSCALL msg=audit(24.07.2014 13:19:54.409:92) : arch=x86_64 syscall=fchmod success=yes exit=0 a0=0x0 a1=0600 a2=0x5 a3=0x683ce7 items=1 ppid=1 pid=5903 auid=flo uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=users fsgid=root tty=tty2 ses=15 comm=login exe=/usr/bin/login key=vt2222
    type=PROCTITLE msg=audit(24.07.2014 13:19:54.413:93) : proctitle=login -- flo
    type=PATH msg=audit(24.07.2014 13:19:54.413:93) : item=0 name=/dev/tty2 inode=24 dev=00:05 mode=character,600 ouid=flo ogid=tty rdev=04:02 nametype=NORMAL
    type=CWD msg=audit(24.07.2014 13:19:54.413:93) : cwd=/
    type=SYSCALL msg=audit(24.07.2014 13:19:54.413:93) : arch=x86_64 syscall=open success=yes exit=3 a0=0x6665a0 a1=O_RDWR|O_NONBLOCK a2=0x0 a3=0x7fffea504d00 items=1 ppid=5903 pid=5914 auid=flo uid=root gid=users euid=root suid=root fsuid=root egid=users sgid=users fsgid=users tty=tty2 ses=15 comm=login exe=/usr/bin/login key=vt2222
    type=PROCTITLE msg=audit(24.07.2014 13:19:54.416:94) : proctitle=/usr/bin/tty
    type=PATH msg=audit(24.07.2014 13:19:54.416:94) : item=0 name=/dev/tty2 inode=24 dev=00:05 mode=character,600 ouid=flo ogid=tty rdev=04:02 nametype=NORMAL
    type=CWD msg=audit(24.07.2014 13:19:54.416:94) : cwd=/home/flo
    type=SYSCALL msg=audit(24.07.2014 13:19:54.416:94) : arch=x86_64 syscall=stat success=yes exit=0 a0=0x10d4060 a1=0x7fff388a7470 a2=0x7fff388a7470 a3=0x10d4050 items=1 ppid=5915 pid=5916 auid=flo uid=flo gid=users euid=flo suid=flo fsuid=flo egid=users sgid=users fsgid=users tty=tty2 ses=15 comm=tty exe=/usr/bin/tty key=vt2222
    type=PROCTITLE msg=audit(24.07.2014 13:20:38.319:95) : proctitle=/usr/bin/Xorg.bin
    type=PATH msg=audit(24.07.2014 13:20:38.319:95) : item=0 name=/dev/tty2 inode=24 dev=00:05 mode=character,600 ouid=root ogid=tty rdev=04:02 nametype=NORMAL
    type=CWD msg=audit(24.07.2014 13:20:38.319:95) : cwd=/home/flo
    type=SYSCALL msg=audit(24.07.2014 13:20:38.319:95) : arch=x86_64 syscall=open success=no exit=-13(Permission denied) a0=0x82715c a1=O_RDWR|O_NONBLOCK a2=0x0 a3=0x0 items=1 ppid=5937 pid=5938 auid=flo uid=flo gid=users euid=flo suid=flo fsuid=flo egid=users sgid=users fsgid=users tty=tty2 ses=15 comm=Xorg.bin exe=/usr/bin/Xorg.bin key=vt2222
    Look at the last block in PATH and the block before the last. The ouid changes (owner of file) but there is no process which does this.
    Am I deciphering this right?
    Greetings

  • Only one MRP run for diffrent companies plants

    Hi PP expert,
    my bizness scenario  is . there 2 companies  code one company code has 2 plant and another comp has 3 plant..only one product is assembling in all plant. suppose  finish material  X is producing in all company plants
    but  finish material X have component K and L, L is manufacturing in only one plant and supply to all company plant
    my client want to produce material component "L" for all plants  for his monthly  requirement with MRP run.
    component L is semi finish material and its is component of X
    but i am not under standing how will get requirement from  same company plants and other company plants. for Monthly MRP run
    Kindly suggest me how will take requirement from others companies plants for MRP run...
    kindly suggest me step by step
    Regards
    Aqueel

    Dear Friend,
    Only one MRP Run i.e. the Total MRP Run is possible at different plants but all must be under same company code.
    in your case ,plants are under different comp.codes , so it s quite difficult.
    Here I have to check the posiibility of using the special procurement key  to tranfer the material  between plants assigned to different comapny codes.  The particular Keys are ..
    40--Stock transfer (proc.from alter.plant);   70 -- Withdrawal from alternative plant   or 80----Production in alternative plant*
    If it is possible , then you can use this option of Special Procurement key.
    Otherwise you can use Plant to plant transfer movements like 647 to transfer beween plants against the Purchase order.
    Regards,
    Edited by: Girishprasad Subhash Pawar on Jun 28, 2010 12:26 PM
    Edited by: Girishprasad Subhash Pawar on Jun 28, 2010 12:30 PM

Maybe you are looking for