Is there software to cool down my AMD turion duel core (M530) processor?

What it would be is software to lower the Processor frequency thereby lowering heat output of course slowing the speed also. but if I can keep the dv4-2145dx processor from overheating, which it seems  to do without hardly any load I think I can relax some. Right now it's 50 degrees centigrade, which I believe is to hot for not doing much just on the net. I have a laptop cooler under it to!! The computer is brand new so dust is not the issue................

AMD's Cool 'n Quiet application is supposed to take care of that. 
Cool 'n Quiet Basics
50 degress C is actually not too awful for a Turion...70 is where it starts to get toasty.
Cool 'n Quiet should already be enabled on your system. Make sure the power setting is for laptop so the frequency stepping can operate. Which Windows version are you running?

Similar Messages

  • My Power Book G4 unable to download instant watch movies from Netflix. Is there software to enable this?

    My Power Book G4 is unable to download Instant Watch movies from Netflix. Is there software to enable this?

    Powerbook has a PowerPC G4 processor, which isn't Intel-based.
    That's a problem we've run into with Powerbooks ... various web sites requiring an Intel processor or Flash, and other products, no longer being supported. 

  • Screen won't come on after restart I must let it cool down at least 30 mins

    Anytime I restart my MBP I have to wait till it cools down or the screen will remain blank. I am not sure if this is a safety precaution or just a faulty logic board. All my firmware and software is updated. I read about the thermal paste and switching the RAM chips. Switching the RAM chips works sometimes. However, with a computer as "prestigious" as the MBP, i shouldn't have to have a little phillips head on me every time I want to restart my computer. As far as the thermal paste goes, has anyone tried cleaning theres? I would like to hear someones testimony before I start dissecting mine. I know this has been a problem with allot of MBP I am curious to see if someone has found a simpler solution.

    I have the exact same problem, I have to let the computer sit for a long period of time before trying to turn it on. If not, i get a solid black screen, with the front light on, and the noise from the hard disk. Any suggestions? I don't have any additional RAM installed.

  • Temperature ipod needs to cool down comes on

    Temperature caution icon comes on and says i pod needs to cool down, but have not been usig it or charging it.

    Unles you are in a very high place or the iPod is in direct sunlight, there is something wrong with your iPod.
    The error will go down when the iPod cools enough. 

  • HT1430 my iphone 4 turn off after appearing message "temprature high, need to be cool down after than doesn't becoming turn on"

    my iphone 4 turn off after appearing message 'temprature high, need to be cool down' after that does not getting turn on by anyhow.

    Hello vijaypatel,
    Thanks for the question. The following article outlines the temperature warning that you experienced:
    iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
    http://support.apple.com/kb/HT2101
    If the iPhone is no longer powering on, we will need to isolate this issue to determine if it is hardware related.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

  • How do you cool down the iPod touch

    How and is it bad if you don't?

    Like Kappy said, turn it off for a while, a couple of hours at least. How hot is hot? A little warm... or too hot to handle? If you bake your iPod you can damage the battery and circuits doing permanent damage. Have seen a couple posts where people have reported there iPod's started smoking (as I remember these were heavy gamers that refused to turn off the iPods) and one stated it started on fire; don't remember the circumstance. During prolonged heavy use, like long gaming sessions-- (activities that work the CPU hard) and charging, getting warm is normal. But if it is getting to hot to handle or a heat warning is popping up, you have a problem. Turn it off, allow it to cool down. If keeps reoccurring try resetting or Restoring to backup or Restore to new. If over heating continues contact Apple Genius Bar and have your iPod evaluated. Good luck, Cheers.

  • HP Color LaserJet Pro MFP M177fw Printer always cool-down mode

    Hi there, i am also meeting with the same issues like the cooldown mode printing.

    Hi , I found something written by  that you may find helpful regarding the printer going into cool down mode: I have provided a document with Resolving Control Panel Messages. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation. Update the printer's firmware. HP Color LaserJet Pro MFP M177fw Drivers. Where is the printer located? (enclosed shelf, desk)How many pages are you printing when you get this message?What is the paper's weight and what kind of paper are you using?  If the issue persists, please post back with the answer to the above questions.  Thanks.   

  • HP printing in cool down mode

    Dear HP Forum, I have the same problem with my m177 printer, always printing in cool down mode. Very frustrating. Please send me solution urgently. Thanks, Yuta10

     Hello there , Welcome to the forums I read your post about the troubles with Cool Down Mode, and wanted to reach out with my suggestions. First, please see the recommendations for this concern from my colleague  in this thread here: mfp m177fw ALWAYS Display Printing.... Cool-Down mode If the problem continues, then please contact HP directly to discuss your printer replacement options: Step 1. Open link: www.hp.com/contacthp/
    Step 2. Enter Product number or select to auto detect
    Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
    Step 4. Scroll down and click on: HP contact options - click on Get phone number
    Case number and phone number appear.  Have a great day

  • MFP M176n Printing Cool-down mode problem

    I just boughjt a HP color laser jet pro MFP M176n which has now is  always show 'printing cool-down mode' after a few pages prinitng. It's too long to complete the printing work. Appreciated if you could help solve the issue urgently. i tried all the above suggested solution , i am desperate,please send me the private message as you did to others ,i need a workable solution  or i may have to return printer

    Hi @xpresscomputer, I understand that you are getting a "Cool-down" error. I would be happy to help you. I wasn't sure what steps you have tried so far, so I am providing all the steps to see if it will help resolve the issue and I can send you that information in a private message. In the forum beside your handle name just click on the envelope to view it. I have provided a document with Resolving Control Panel Messages. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation. Update the printer's firmware. Software and Driver Downloads. If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Have a nice day!
    Thank You.

  • My iPod said "Can not use iPod until cools down". I let it sit over night and now it wont charge.

    So last night My ipod brought up a "Can not use ipod til it cools down" message. Than I turned it off for the night and It wont charge. Is there something wromg with my iPod?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              
    However, I suspect a hardware problem and the Apple store will likely be necessary.

  • IPad keeps saying needs to cool down after using for only 5 mins. Have reset but still happening

    iPad keeps saying needs to cool down after only 5 mins use. Have reset but still the same. Any suggestions?

    You need to have a computer that is running iTunes in order to restore the iOS software. Read this carefully and completely. If you have never used your iPad with iTunes in the past, it becomes a little more complicated.
    Use iTunes to restore your iOS device to factory settings

  • Why does iPod say needs to cool down?

    Why does my iPod say needs to cool down?

    Unless you are in a very hot place it usually means a hardware problem
    Try the following to rule out a software problem.:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HP Color Laserjet Pro MFP M177fw going cool down mood after printing every pages.

    I have bought Color Laserjet Pro MFP M177fw before only 3days. From the very begining It says printing.... cooldown mood, and take a long paus. This issue occures after printing each page. I am using HP Toners. And my directly connected with wall socket(Electric).  Please help me. It is urgent for me. Thanks in advance.

    Afternoon , I found some information about the cool-down mode on your Laserjet Pro MFP M177fw. The product is too hot to continue printing at normal speed.
    The product will pause longer between printed pages until it cools down.
    Overheating occurs when the product lacks air ventilation or when it prints continuously for a long period of time. To prevent overheating, place the product in a well-ventilated area, and divide very large print jobs into smaller print jobs.Other than using it in a well ventilated room, you could see if there are any firmware updates available. You can click on this link to Getting Printer Updates for HP LaserJet Pro. If the issue continues, I would Contact HP Support for further assistance. Fill in the model number and the form to receive a case number. You can view all other ways of contacting HP from their list of Support Options.  Thanks, 

  • "iphone must cool down before using it again"

    my iphone 4s has been randomly stopping and saying "iphon needs to cool down before you can use it" there is no water damage cause i just got it replaced, its been happening so frequently i ended up restoring it thinking it was an app overrunning or something but its still happening.. help!!!!1

    I've had that happen once or twice in the summer while using the phone in the car for both navigation and streaming music (and it was on the seat in the sun). However, if you're having it happen regularly, you should take it back to the Apple Store.

  • Cool Down Options for New 27" imac i5

    Ok, so the i5 gets pretty hot after some heave use and my CPU fan speeds up to keep things cool. My question is what is better to do for cooling down after heavy use?
    +1. Put the computer to sleep, no fan running.+
    Or
    +2. Shut down all apps, let the fan run and let the computer do its thing. Going from screen saver 5min.- display sleep 15min.- then to full sleep 45min.+
    Cuzz with option 2, the fans have time to run to cool the computer down and then go to sleep. But with option 1 it just sleeps and natural cools over time.
    What would be better practice to do? and i am sorry if this has been posted before. I searched and could not find anything. Just shut down v.s. sleep.

    Hi Oc Bro
    None of the above, I would keep working or playing..... Just because a fan or fans kick up there is no reason to stop what you are doing, the iMac should continue to cool or maintain a safe temperature even if you continue to use it.
    However #2 if I was done using it, except that I would only Sleep the Display (no Screen Saver) for a short time prior to Auto Sleeping the Computer.
    Dennis

Maybe you are looking for

  • How do i save an email on my ipad to a file on the ipad?

    This is the second time I have submitted this question.  I cannot now find where the original question went or any replies. I have an ipad 2 and I need to know how to save an email from my inbox on the ipad to a file, for later reading outside of the

  • Is there a way to assign the mouse middle click

    hello all, I have a graphics pen , and I wish to assign the middle click ( the button that is on the pen ) to switch the foregrou and background color. It is mor handy when painting. is there anyone who knows a method , generally I want to know if I

  • 2012 R2 hyper-V Server - How to use it

    I have just installed Hyper-V Server 2012 R2. I thought I could work my way through using this product, but I can't figure it out. There is no GUI on the server, which is good, but for the life of me I can't firgure out how to remotely administer thi

  • Setting different vibrations for contacts is not working in iOS 7. Thoughts?

    Setting a different vibration alert for a variety of contacts "appears" to be working; the settings are accepted and visible, however, when an incoming text arrives, they all vibe the same - not differentiated. <shrug>.  Using iphone 4S / iOS7

  • Using Sybase JConnect on Websphere

    I am trying to create a datasource in WAS 5.1 using Sybase JConnect Driver 5.5. I seem to be having problems with the setup of the driver in the datasource. Anybody here knows of a website or tutorial that explains how to use Sybase JConnect Driver i