Is there some log I can check on my A2107 to find out why it restarts?

My a2107 tablet shutdown and restarts.
Is there some way to find out why?
Some log I can look at?

Hi fowvaydriver-
If the power is suddenly removed there is no time to write a log entry.
Can you not get what you need from the boot times? If it booted and wasn't supposed to have been shut down that would be a clue.
Is your UPS functioning properly?
Luck-
-DP

Similar Messages

The transaction log for database 'WSS_Content' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases

Hi all,
Observing the below error in event logs once in every day at 3:30 AM on the on SQL Server Machine, it is being used for TFS 2010.
The transaction log for database 'WSS_Content' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
Kindly advice me here on what to do?
Thanks in advance

First thing to check is, what is happening at 3:30am to cause the log to fill up? Is there any maintenance tasks being run against the DB, such as index re-organizations or rebuilds? If so, take a look at what the job is doing, maybe it could
be tuned (ex: A Maintenance Plan with a rebuild indexes task will rebuild *every* index whether it needs it or not. Look at using something that checks how fragmented an index is, and then intelligently determines what, if anything, to do to that
index.)
Basically, the error is telling you that SQL is trying to do something in the DB, and has filled up the log (either because it's not getting backed up often enough, or the transaction in question is running *very* long, or your log is set to not auto-grow)
So, a couple possible solutions:
Increase the frequency of Transaction Log backups of WSS_Content (only works if the DB is in Full Recovery)
If you've got the disk space, turn on auto-growth for the TLog (or just manually grow it larger) {This will work for both Full and Simple Recovery}
It would be nice to know what's causing the space to not be re-used, but with this occuring at 3:30am, you'll either need to set up an Agent job to run around that time and record its results, or manually run something like "select log_reuse_wait_desc from
sys.databases where name = 'WSS_Content';" Me, I prefer to be soundly sleeping at 3:30am and would set up an Agent job to run from say about 3:00am to 3:45am once per minute (maybe even more frequently.)
DON'T shrink the log, though. SQL will idealy grow the log as large as it needs it (if autogrowth is enabled) and no more. If you shrink the file, SQL will just have to re-grow it later again, which can affect performance.
Jason A.

The transaction log for database 'mydatabase' is full. To find out why space in the log cannot be reused, see the log_reuse_wait

Every time I get this error, at different points of testing inserts and deletions on my table:
The transaction log for database 'mydatabase' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
Why do I keep getting this? All I'm doing is deleting several hundred thousand records and inserting them into a couple of tables. i shouldn't have to truncate my log every time or my application bombs out!
sys.databases only gives me this info for log_reuse_wait_desc which does nothing for me:
LOG_BACKUP

sp_helpdb BizTalkDTADb
ALTER DATABASE BiztalkDTADb
SET RECOVERY SIMPLE;
GO
DBCC SHRINKFILE (BiztalkDTADb_log, 1);
GO
sp_helpdb BizTalkDTADb
GO
ALTER DATABASE BiztalkDTADb
SET RECOVERY FULL
GO

Is there a log I can check for internal messages not beingrecieved?

We are using sendmail in an internal VB script. My boss is not getting emails sent to her from this script.
Is there a log I can view (similar to the GWIA log for external messages) that will tell me if the Groupwise system even tried to process it?
Because I am using a script and not the client, I cannot check the sent status. (I think...)

On 6/23/2011 4:46 AM, Jason wrote:
> We are using sendmail in an internal VB script. My boss is not getting
> emails sent to her from this script.
> Is there a log I can view (similar to the GWIA log for external
> messages) that will tell me if the Groupwise system even tried to
> process it?
> Because I am using a script and not the client, I cannot check the sent
> status. (I think...)
First of all you'd be better learning pure object api rather than
shelling out.
Second of all, were you using object api it would generate sent item. I
think sendmail avoids this.
Third of all, the only other way to trace is have the POA on verbose
logging and see what happens. Obviously easier to interpret off hours.

My iPhoto library was erased, can I get it back or find out when it was erased?

We have been away for abou six weeks and found that my iPhoto library is now empty. There were thousands of photos. The library file is still in the same space but it is empty. The last time machine backup was in August, which would have been fine, but the external HDD has failed and we can not recover the backups.
Assuming there is little to no chance of resurrecting the actual library, is there a way someone can look into the OS and find out when the library went from GB in size to kb? If I can pinpoint the date it may have happened it will be easier to narrow down as something we have done or the people who were looking after our house while we were away.

Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

After upgrade to iOS 6, one of my apps won't load. It seems to, then just ends. Is there an error log I can check?

After upgrade to iOS 6, one of my apps won't load. It seems to, then just ends. Is there an error log I can check?

so your starting it up and its just crashing right away, yes? can you tell me what app it acutally is? as iOS6 is so new my thought would be that its probably incompatable with it at this time, im having trouble with my networks app that just will not let me log in at all!
id suggest going to the page of the app on the app store and look to see if it says if its compatable or not? as for a error log its in usage data, which is in settings > general > about, and i think its near the bottom.

I LOST MY IPAD. IS THERE ANY WAY I CAN CHECK WHEN IT WAS LAT "ONLINE"?

I LOST MY IPAD. IS THERE ANY WAY I CAN CHECK WHEN IT WAS LAT "ONLINE"?

If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
How to Find a Missing iPad with FindMyiPad
http://www.dummies.com/how-to/content/how-to-find-a-missing-ipad-with-findmyipad .html
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
Check the serial number (located on back/bottom) in this lost/stolen iPad database. However, most owners are not aware of this database and don’t enter the serial number.
Stolen iPad Database
http://www.stolenlostfound.org/online-stolen-ipad-database
Also do a search, using the serial number, on your local Craig’s List. Some users list the serial number of a stolen iPad to thwart the sale of a stolen device.
 Cheers, Tom

My first gen. iPad exits out of apps and safari at random times when I am trying to use them. So I basically can't do anything on it. Is there some way I can fix this?

Crashing apps. What do I do to fix it?
My first gen. iPad exits out of apps and safari at random times when I am trying to use them. So I basically can't do anything on it. Is there some way I can fix this?

I have the same problem. Yahoo Sportacular aborts every time I try to open it. It attempts to load and then the device goes right back to the home screen. The problem started April 26 after I switched leagues from NHL to NBA. Closing all apps and Restarting doesn't solve solve the problem.
All other apps on the iPad work fine. IPad2, OS6.
Any other suggestions? I suppose I could delete the app from the iPad and try re-installing it

HT204370 I tried to download a movie on my iPad but it didn't work... Is there some way I can access it on my computer now to download it? When I go to purchases in my iTunes it doesn't come up :-/

I tried to download a movie on my iPad but it didn't work... Is there some way I can access it on my computer now to download it? When I go to purchases in my iTunes it doesn't come up :-/

I tried to download a movie on my iPad but it didn't work
Could you walk us through what happened when you downloaded the movie?

My track pad seems to have lost its strong "click" feel. Is this wear and tear or is there some way I can adjust it to feel the "click" more?

My track pad seems to have lost its strong "click" feel. Is this wear and tear or is there some way I can adjust it to feel the "click" more?

downgrading is not supported by Apple and doing so has the potential to brick your device. so, you can't. if you have feed back for the new iOS you can provide that here: http://www.apple.com/feedback/

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times)

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? They play fine on computers but not on dvd players. Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times). Created in DVD studio pro.

Hi
Just my thoughts to add to the excellent answers above.
• BRAND of DVD used - Matters when doing Video-DVDs
Memorex, NoName etc cheap brands usually do NOT work
I only Use Verbatim (more organic dye in these)
• Type of DVD - matters
- DVD+/RW - usually results in problems
- DL-DVDs are more problematic than SL-DVDs
- DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
I only use DVD-R
• BURN SPEED - matters
- Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
I set this down to x2 or x4 max.
Yours Bengt W

I have disable my Iphone5 I would like to switch it on but i dont want to recover it an lose my photos, is there a way i can check when last it was backed up

I have disable my Iphone5 I would like to switch it on but i dont want to recover it an lose my photos, is there a way i can check when last it was backed up

You will find out when you restore it. You don't have a choice but to restore at this point. You will lose any that were not already backed up. You can't back it up after it's been disabled.

My on/off button sticks and today my iPhone shut off and I can't turn it back on. Also it isn't even repond when I plug it in. Any ideas? Is there some way it can be reset?

My on/off button sticks and today my iPhone shut off and I can't turn it back on. Also it isn't even reponding when I plug it in. Any ideas? Is there some way it can be reset?

If the reset does not help, make an appointment at the Apple store. If your phone is out of warranty and you can't afford what they want, google for local repair services.

Is there some way I can insert and play these additional audio files, accessible via separate button

I am converting a CD-ROM course to an online format with that software.
In the majority of slides created I have used the Import Audio function to insert a primary audio file containing important curriculum information.
This file typically activates the moment you open the slide.
So far so good.
However, in many slides I also need to insert some secondary audio files.
While the Import Audio function permits me to splice several files into one, this isn't what I want.
Instead, I need to insert one or more additional audio files that can be activated independently via separate buttons on a given slide.
I can in fact do this with the Insert Button function, but in the process a Windows Media Player file opens when I convert the project into HTML.
My question:
Is there some way I can insert and play these additional audio files, accessible via separate buttons, without creating and opening a Windows Media Player file?
Thanks

It is hard to assess the situation without sitting at your computer and having a look myself. First, if you're seeing space savings I doubt all your files are a compressed format. Frequently if you try compressing a compressed format file such as AAC (don't confuse with AIFF) you will actually find the file gets larger because there is overhead to compression and if it cannot compress any more then you end up just adding overhead on top of no savings. Second, normally if you zip the iTunes library it would basically make it inaccessible to iTunes and iTunes would make you a brand new library or at least flag all your tracks as missing (as you are seeing ain part).
I don't know what computer you are running, which operating system, which version of iTunes. Unless they have done something radical in Lion in terms of letting you zip your iTunes folder and still have it functional, you either didn't zip the whole thing, or... I don't know. One scenario is that somehow your media have been split up and you have them in several locations. One isn't really part of your library except for 80 tracks, so when you compressed it (and I still am puzzled by the compression unless it was AIFF files you were no longer using), it didn't really make much difference to the playability. Then you have an untouched library elsewhere.
Use the Reveal In Finder command to see where some of those problem files are located vs. where the playable files are located.

Is there some way I can disable sign-in notificati...

I don't want to turn off notifications completely, but is there some way I can turn them off for individual people in my contacts list? I've got friends that I don't want to delete or block, but they sign in and out constantly and it drives me up the wall. Can I disable notifications for them specifically somehow?

At the moment, such option is not yet available. You can only disable/enable notifications for all of your contacts.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

Is there some log I can check on my A2107 to find out why it restarts?

Similar Messages

Maybe you are looking for