Is there something wrong with my directory server replica?

Yesterday I spun up a replica of my OD Master which I had just rebuilt clean from scratch. Everything SEEMS fine, but the GUI reports a status I did not expect:
As you can see, the master has its own IP listed twice, and there are 3 IP's for the replica - only the first is valid for my network.
Is this anything to worry about? It's not what I expected to see when replication was complete. Here's the output from serveradmin settings dirserv
dirserv:selfWrite = yes
dirserv:locales = _empty_array
dirserv:caServer = yes
dirserv:MacOSXODPolicy:Directory Binding = yes
dirserv:MacOSXODPolicy:Configured Security Level:Binding Required = no
dirserv:MacOSXODPolicy:Configured Security Level:Advisory Client Caching = no
dirserv:MacOSXODPolicy:Configured Security Level:Man In The Middle = no
dirserv:MacOSXODPolicy:Configured Security Level:Packet Signing = no
dirserv:MacOSXODPolicy:Configured Security Level:No ClearText Authentications = no
dirserv:MacOSXODPolicy:Configured Security Level:Packet Encryption = no
dirserv:kerberizedRealmList:availableRealms:_array_index:0:dirNodePath = "/LDAPv3/127.0.0.1"
dirserv:kerberizedRealmList:availableRealms:_array_index:0:realmName = "SERVER.DOMAIN.TLD"
dirserv:kerberizedRealmList:defaultRealm = "SERVER.DOMAIN.TLD"
dirserv:PWPolicyInfo:requiresMixedCase = no
dirserv:PWPolicyInfo:passwordMinLen = 0
dirserv:PWPolicyInfo:mustChangeAtFirstLogin = no
dirserv:PWPolicyInfo:passwordMustHaveAlpha = no
dirserv:PWPolicyInfo:requiresSymbol = no
dirserv:PWPolicyInfo:passwordNotAccount = no
dirserv:PWPolicyInfo:passwordDisableFailedLogins = 0
dirserv:PWPolicyInfo:passwordHistoryLen = 0
dirserv:PWPolicyInfo:passwordDisableNumDaysInactive = 0
dirserv:PWPolicyInfo:passwordDisableDate = 0.000000
dirserv:PWPolicyInfo:passwordExpireDays = 0
dirserv:PWPolicyInfo:passwordMustHaveNumber = no
dirserv:PWPolicyInfo:passwordDisableNumDays = 0
dirserv:LDAPDefaultPrefix = "dc=server,dc=domain,dc=tld"
dirserv:defaultKerbRealmName = "SERVER.DOMAIN.TLD"
dirserv:masterConfig:replicas = _empty_array
dirserv:LDAPSettings:useSSL = yes
dirserv:LDAPSettings:LDAPServerBackend = "config"
dirserv:LDAPSettings:LDAPDataBasePath = "/var/db/openldap/openldap-data"
dirserv:LDAPSettings:maxSearchResults = "11000 size.prtotal=unlimited"
dirserv:LDAPSettings:LDAPSSLIdentityName = "*.domain.tld"
dirserv:LDAPSettings:LDAPTimeoutUnits = "seconds"
dirserv:LDAPSettings:LDAPSearchBase = "dc=server,dc=domain,dc=tld"
dirserv:LDAPSettings:searchTimeout = 60
dirserv:LDAPSettings:LDAPSSLSerialNumber = "2246"
dirserv:treeConfiguration:odTree:_array_index:0:PrimaryMaster = "server.domain.tld"
dirserv:treeConfiguration:odTree:_array_index:0:IPaddresses:_array_index:0 = "10.0.1.11"
dirserv:treeConfiguration:odTree:_array_index:0:IPaddresses:_array_index:1 = "10.0.1.11"
dirserv:treeConfiguration:odTree:_array_index:0:GUID = "7BACB764-6A2C-451D-BF8D-74654B4FFBB1"
dirserv:treeConfiguration:odTree:_array_index:0:ReplicaName = "Master"
dirserv:treeConfiguration:odTree:_array_index:0:treeSource = "PrimaryMaster"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:0:IPaddres ses:_array_index:0 = "10.0.1.11"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:0:IPaddres ses:_array_index:1 = "10.0.1.11"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:0:GUID = "7BACB764-6A2C-451D-BF8D-74654B4FFBB1"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:0:ReplicaN ame = "server.domain.tld"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:0:Replicas :_array_index:0:GUID = "B15C3B08-2C85-44ED-B18F-403E1B1262AF"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:0:Replicas :_array_index:0:ReplicaName = "server4.domain.tld"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:1:IPaddres ses:_array_index:0 = "10.0.1.22"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:1:IPaddres ses:_array_index:1 = "172.16.118.1"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:1:IPaddres ses:_array_index:2 = "192.168.178.1"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:1:GUID = "B15C3B08-2C85-44ED-B18F-403E1B1262AF"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:1:ReplicaN ame = "server4.domain.tld"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:1:Replicas :_array_index:0:GUID = "7BACB764-6A2C-451D-BF8D-74654B4FFBB1"
dirserv:treeConfiguration:odTree:_array_index:0:Replicas:_array_index:1:Replicas :_array_index:0:ReplicaName = "server.domain.tld"
I can see that the settings do indeed jive with what the GUI reports. I just don't know how or why it would have been configured that way. Is this configuration going to be problematic? Should I attempt to address it now? Would changing the replica array be destructive to the current OD database? I just got done rebuilding the dang thing from the ground up because of unrecoverable corruption, I don't want this to be the beginning of a new problem.
Thanks for looking.
Message was edited by: MustardParty

Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Do NOT use an iPod/iPhone charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know. If the above test does, in fact, indicate a problem, read this.
Also, according to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

Similar Messages

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

Nah - that's just the normal boot process.
Clinton

"The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'. Is there something wrong with the latest installer? (11.3.1)

Getting error message as shown: "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'. Is there something wrong with the latest installer? (11.3.1)

Installs fine for me, so I'd guess you got an incomplete or corrupt download. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links and download a fresh copy of the installer.
tt2

I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

It's also under the File menu.

Is there something wrong with this table row definition?

I have am supporting a coldfusion app that manipulates several forms. One one particular page, there is a form that consists of several tables. The last 3 lines of the last table are
    <tr>
            <td height="35" align="right" valign="middle">Description:</td>
            <td align="left" valign="middle"><input name="tmpPurpose" class="RptStd" size="70" maxlength="100" value="" onblur="document.ExpnDtl.Purpose.value = this.value;" onchange="ChkName(<cfoutput>#Session.CCWarn#</cfoutput>)" /><input type="hidden" name="Purpose" value="" />
                        <a href="#" id="aDesc" onclick="ShowHelp('9')" style="border:none; display:inline; padding: 0px 0px 0px 0px"><img src="/images/Help_Icon.gif" height="14" width="13" border="0" /></a>
                        </td>
      </tr>
      <cfif IsDefined("form.ExpnsCntrb")>
          <tr id="CntrbErr">
               <td colspan="2" class="Error"><cfoutput>#form.ExpnsCntrb#</cfoutput></td>
          </tr>
      </cfif>
      <tr id="expnContrib">
              <td align="left" valign="middle" height="35" class="RptStd" colspan="2">Is expenditure a contribution to a candidate, officeholder, or political committee?    <input type="radio" name="rdoCntrb" value="Y" /> Yes    <input type="radio" name="rdoCntrb" value="N" /> No</td>
       </tr>
      <tr id="COHInfo">
          <td colspan="2" class="RptStd" align="left" valign="middle" height="35">
              <input type="checkbox" name="chkCand" id="chkCand" value="X" onclick="if (this.checked) document.ExpnDtl.btnCOH.disabled = false; else document.ExpnDtl.btnCOH.disabled = true;" />Direct expenditure to benefit a candidate or officeholder
              <input type="button" name="btnCOH" value=" Enter C/OH Information " class="RptBtn" onclick="window.open('/Testing/Test_COHBenefit.cfm?Parent=' + document.ExpnDtl.ItemID.value + '&Type=EXPN&Form=' + document.ExpnDtl.ExpnCode.value, 'CandidateInfo', 'width=730px,height=475px,scrollbars,resizable,location')" disabled /> <a href="#" id="aDirExpn" onclick="ShowHelp('11')" style="border:none; display:inline; padding: 0px 0px 0px 0px"><img src="/images/Help_Icon.gif" height="14" width="13" border="0" /></a>
          </td>
     </tr>
     </table>
Now whne the form is displayed on my page, I always see the line of text Description and the line of text Direct expenditure to benefit a candidate or officholder (in bold above). But I never see the line of text Is expenditure a contribution to a candidate... (in italics above).   It seems so simple but I can't figure out why that line does not display!! Is there something wrong with that tr/td definition?

Have you tried removing the ID? Just to see if some CSS might be using that ID with a display:none or visibility:none statement?

Is there something wrong with a Oscar Gomez Fuentes 2Channel oscilloscope

Is there something wrong with a Oscar Gomez Fuentes 2Channel oscilloscope or are my devices configured wrong. I have DAQCard-6036E and SCC-2345 with SCC-Ft01 and SCC-A10 modules. The problem is that when I am measuring with A10 it effects to FT01's RMS and DC values. But when I am measuring with Ft01 everything is ok. So what's wrong?? I attached a picture of a front panel.
Attachments:
front_panel.JPG ‏132 KB

Neuvos,
Do any of the signals you are measuring have high output impedances (> 1 kOhm)? If so, you may be seeing cross-talk (or ghosting). Below, I have included links to a number of documents that discuss this issue and methods for eliminating it:
Data Acquisition: Troubleshooting Unexpected Voltages or Cross-talk in Analog Input Channels
Using a Unity Gain Buffer (Voltage Follower) with a DAQ Device
Is Your Data Inaccurate Because of Instr
umentation Amplifier Settling Time?
Good luck with your application.
Spencer S.

Is there something wrong with my BT Vision.

Is there something wrong with my BT Vision.
It lists loads of programmes, but when I click them there are only a few episodes available.
For example, I search for "Regular Show" using the Blue button and since I've had BT Vision (for a couple of months), only the same two episodes have ever appeared.

Hi McKenzieM,
Welcome to the forum.
I checked "Regular Show" and it looks like episodes 29 and 30 are currently available. I have sent this off to double-check this.
Can you give me examples of what other programs are showing a few episodes so I can look into it?
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Merged clips - are they all bugs or is there something wrong with my system?

I have to use merged clips to sync video and audio because making every clip a sequence is too cumbersome and doesn't give me thumbnails to help choose my shots. Apparently, merged clips are very buggy. I can't use colored markers because they don't get saved on merged clips. I can't use match frame on merged clips because they don't find the correct frame. I can't set a poster frame on a merged clip except with the "in" marker. Are all those problems bugs, or is there something wrong with my specific system. I trashed preferences to fix another problem unrelated to merged clips, but that didn't solve any of the clip problems.

I don't believe there's anything wrong with your system.

HT1567 I have itunes and have not seen any of the podcasts I download updated past May 8th. Is there something wrong with my itunes that the podcasts are not uploading to my pc?

My itunes is not showing any of the podcasts I download past may 8th. Is there something wrong with my itunes?

Seconding this -- no podcasts have updated past May 8th. What is going on Apple?!?

My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

Hi. Whenever I go through one of the menus in firefox, the links remain highlighted after my mouse passes over them. Is there a bug fix for this or is there something wrong with my computer? I am running windows 7 if that helps.

Hi. Whenever I go through one of the menus in firefox, the links remain highlighted after my mouse passes over them. Is there a bug fix for this or is there something wrong with my computer? I am running windows 7 if that helps. This problem started ever since I upgraded to version 5.

I have downloaded and used the iPod Reset Utility, alot that did. My current state is iTunes on my XP Home with SP3 sees the iPod. When I drag a song to the iPod, the Sync message appears for about 5 minutes, then the Apple symbol appears. But no song has been transferred to the iPod.
I tried to tap into the XP iTunes database from my iBook, but although it acted like it would add the XP library to the iBook library, it did not. I've got 19 Gs of songs on the XP. If I have to load each song from its original CD to get it on my iBook I'm going to start looking for some other app or device so that I can listen to my music.
It is a shame, in the old days, Apple techs use to look at what was going on, now it appears they don't, so they never know they have problems until Apple's profits fall.

My ipod is cracked and it chipped away a little more last night and that's when my wifi stopped working. My wifi works on every other device in my house except for my ipod. Is there something wrong with my ipod?

My ipod is cracked and it chipped away a little more last night and that's when my wifi stopped working. My wifi works on every other device in my house except for my ipod. Is there something wrong with my ipod?

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Try right next to the router
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Could it be this?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

HT204266 I am trying to download Tap Tap Revenge on my new Ipad air..however..i searched for it in the App Store but there are none...help please..i really love this game! Is there something wrong with my App Store or my ipad??

I am trying to download Tap Tap Revenge on my new Ipad air..however..i searched for it in the App Store but there are none...help please..i really love this game! Is there something wrong with my App Store or my ipad??

It looks like the app is not currently in the App Store, I can't find it in the UK nor US stores.
If you had previously downloaded it then do you have a copy on your computer's iTunes so that you can sync it to your iPad ?

Is there something wrong with Quicktime and TIFFs?

I've been trying to see with Firefox the TIFF images of patents at the USPTO site and I can't. The browser advises me to install the missing plug-in although Quicktime is already installed. I wonder if it's a Quicktime problem or a Firefox one. I have a reason to believe there's something wrong with Quicktime though. Read on to see why.
On my system the *TIFF Image Test* (from mozdev.org) fails although I have the latest Quicktime plug-in. This happens regardless of the browser I use, all latest editions: Firefox 3.6, Internet Explorer 8 (both 32-bit and 64-bit versions) and Chrome 4. All seem to fail to recognize the presence of the installed Quicktime although my Windows OS is set to open TIF/TIFF files with Quicktime/PictureViewer.
Running about:plugins on my Firefox does show the Quicktime plug-in for a variety of files but NOT for opening embedded TIF/TIFFs. Also, when I open *Tools -> Options -> Applications* I see there is no registered handler for TIF/TIFFs. They don't appear on the known Content Types.
Is there something wrong with the installation of Quicktime? I can see USPTO TIFF images only with Safari which appears to have an integrated TIFF viewer. I haven't tried to install alternatiff or any other alternative TIFF handler.

DocBAZ,
I tried to visit the "test site" above. I'm not really sure it's an embedded image on a HTML page because I get a Firefox download window and a suggestion to open it with PictureViewer, which is the expected behavior for downloadable images. The mozdev.org test page on the other hand had an embedded image that needed the plugin, which is what is bugging me.
If you want a real complex test page with both an embedded TIFF and a downloadable one check AlternaTIFF here: http://www.alternatiff.com/testpage.html
Indeed the changes I made were in the QuickTime preferences, not PictureViewer which has no settings to change. And yes, Windows 7 has a unique place to deal with file types and MIME settings.
You will find some interesting suggestions over the problem at SuperUser.
http://superuser.com/questions/107142/uspto-site-asks-for-quicktime-plug-in-whic h-i-already-have-installed-why

Is there something wrong with my ps4 or am i just being paranoid?

I noticed that when i try to play some games textures take a while to load. It's especially noticeable in Battlefield 4, when a map loads and i spawn i have to wait like 30 seconds or more for the textures to load. I wouldn't care too much about it but it always took way less time. I think i also noticed it in Witcher 3, some textures just take a really long time to load especially in Novigrad. In Batman Arkham Knight i can notice it too on some street signs and ground textures when i'm flying around. Is there something wrong with my ps4 or am i just being really paranoid?

tsiluk wrote:
... i am charging it but the battery indicator just shows 5% after about 4 hours of charging time. ...
Are you using the Supplied iPad Charger and Cable...
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Try Each one in turn and if you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...

Is there something wrong with my directory server replica?

Similar Messages

Maybe you are looking for