Is there something wrong with my iPhone 5?

Since i've had my iPhone 5 it's been working perfectly until about a month ago.
Chargers won't last longer than a week. Some have been from Apple, some have been cheep ones.
Recently, some won't even last more than 2 days. My phone can be on charge for about half an hour and the cables are either too hot to touch or are melting.  The phone is also too hot to touch.
I don't want to keep buying new chargers if theres a problem with my phones charger slot.

So why don't you bring the phone to Apple for evaluation?

Similar Messages

  • Is there something wrong with the iPhone calc app?

    The other day I needed to show my son how many paper punch cards would be needed to compete with the flash memory on my iPhone 4.  Each punch card had 480 spaces on it, that could correspond to bits.  In order to work out how many punch cards would be needed, I had to first figure out how many bits there were in 32Gb.  The following calculation needs to be done in landscape mode, otherwise you ae unable to see the numbers properly on the display.
    8 x 1024 x 1024 x 1024 x 32 = 274,877,906,944
    Now for the interesting bit.
    If I divide the amount of bits held in a 32Gb by the amount of bits on the old paper punch card I should get - 572,662,306.1333333333 recurring cards required.
    Strangely the iPhone calc app believes that the number is just shy of 6 cards at 5.7266230613333e+8.
    Now I know this is not some strange scientific notation because if I divide by a whole number such as 100 or 400, etc... then it gets the answer right.  Further more with really big numbers, the iPhone calc app seems to loose the plot and provide incorrect answers.  Other apps I have for calculation get the answer right, but not the iphone app.
    Before anyone points out that Flash storage is done in 1000Mb's instead of 1024Mb's, I know.  I was just doing a demonstration based on the actual figure of 32Gb, using the correct numbers based on a binary base.  Storage manufacturers often use this as there manufacturing techniques do not work in the same way as the maths.
    Anyone else seen this problem, and if so, what strange numbers can we get, highlighting the problem, so that it gets fixed in the next update.  I think I shall have to try this out in Numbers on the iPhone, see if the problem is there to.  As a passing shot I feel that this is a fundamental problem that needs to be addressed, and relatively quickly.
    I am currently using iOS 5.0.1 on the iphone and iPad.

    Amazing...yet again an excuse for a 16 digit display that is incapable of displaying 572 million.... But funnily enough it will display something proper when divided by 400, or in other words, it resorts to moron system and prints '687,194,767.36'.  Maybe we should all write everything in scientific notation...and forget this silly simplistic system of using numbers and commas to designate large numbers.  For all you scientific types, they are no longer millionaires, no they will just be renamed "1.0e+6's".  Even better, we could rename millionaires row, to something scientific.  Yeah I can see that taking off.
    @tonefox, thanks for clearing that up for me, I wondered what all those strange new fangled words were for...
    I give up, you guys win.  Asking questions here is like nailing jelly to a wall...

  • There's something wrong with my iphone 4s

    So there's something wrong with my iPhone 4s.
    Just recently it worked fine and all of a sudden it started going insane so what I did was turn my phone off for five minutes then back on. When I did my imessage won't work nor does my app called Line won't allow me to log in claiming my network is not working properly (when in fact it is because I used safari and searched five websites and it works fine) then I tried my imessage and it still won't work so I went to my settings and when I did it said my imessage was off so I switched it on and it was asking for my apple ID and I gave the correct information, making sure to type the password slowly so I won't make errors but still it claims I have the wrong password. I have other apple IDs and I used them and they all have the same password and still nothing. It's really annoying and I want it to be fixed soon because I've tried everything, I've tried putting it on airplane mode then putting it off, turning off imessage and restarting then turning it on again, I can't even log on to my apple ID here properly a few seconds ago and I restarted my phone already and shut it off too and still no difference.
    I'm hoping someone who can help me, please  nothing that requires deleting files because my files are important I do remember backing up on iCloud but I'm not quite sure when I did that and so I'm afraid of using that back up file.

    Hi Rsh Ahmed,
    Thanks for visiting Apple Support Communities.
    If you're not able to connect to wi-fi networks after updating, try the steps in our wi-fi troubleshooting article:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    All the best,
    Jeremy

  • ITunes is telling me there is something wrong with my iPhone, what should I do? I have the 16GB iPhone 4 and I bought it 2nd hand with no reciept so I cant send it off. What should I do?

    iTunes is telling me there is something wrong with my iPhone, what should I do? I have the 16GB iPhone 4 and I bought it 2nd hand with no reciept so I cant send it off. What should I do? This happens after i updated it and I click sync.

    Pilko95 wrote:
    iTunes is telling me there is something wrong with my iPhone,
    Can you explain exactly what the message says?
    Do you have its serial number? If you do, type it in the following web page to determine your service and support options:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    If you do cannot find a serial number on the iPhone you can find it stored in your last iTunes backup:
    Open iTunes on the computer you used to sync the iPad and select Preferences…from the iTunes menu. (In Windows, choose Edit > Preferences.)
    Select the Devices pane. Position the cursor over any of its backups. The iPad's serial number will appear in a popup window.
    For a screenshot read: iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
    Scroll down to:
    Additional Information >
    Getting the information from your computer >
    If you have access to your computer, but not your device

  • Turned my iphone 4 off now I turned it on again and stuck on apple logo, after this i put it in recovery mode but it failed and itunes says there is something wrong with my iphone any ideas

    My iphone 4 stuck on the apple logo then it wont work in recovery mode. My iphone then wouldnt work in recovery mode, itunes said there is something wrong with my iphone. On my iphone it says connected to itunes any ideas what could be wrong

    You might have to get it serviced, or visit an Apple Store to get it looked at.
    Apple - Support - Service Answer Center

  • My ipod is cracked and it chipped away a little more last night and that's when my wifi stopped working. My wifi works on every other device in my house except for my ipod. Is there something wrong with my ipod?

    My ipod is cracked and it chipped away a little more last night and that's when my wifi stopped working. My wifi works on every other device in my house except for my ipod. Is there something wrong with my ipod?

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Try right next to the router
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Could it be this?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    Nah - that's just the normal boot process.
    Clinton

  • "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'.  Is there something wrong with the latest installer? (11.3.1)

    Getting error message as shown: "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'.  Is there something wrong with the latest installer? (11.3.1)

    Installs fine for me, so I'd guess you got an incomplete or corrupt download. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links and download a fresh copy of the installer.
    tt2

  • I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

    I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

    It's also under the File menu.

  • Is there something wrong with this table row definition?

    I have am supporting a coldfusion app that manipulates several forms.  One one particular page, there is a form that consists of several tables.  The last 3 lines of the last table are
        <tr>
                <td height="35" align="right" valign="middle">Description:</td>
                <td align="left" valign="middle"><input name="tmpPurpose" class="RptStd" size="70" maxlength="100" value="" onblur="document.ExpnDtl.Purpose.value = this.value;" onchange="ChkName(<cfoutput>#Session.CCWarn#</cfoutput>)" /><input type="hidden" name="Purpose" value="" />
                             <a href="#" id="aDesc" onclick="ShowHelp('9')" style="border:none; display:inline; padding: 0px 0px 0px 0px"><img src="/images/Help_Icon.gif" height="14" width="13" border="0" /></a>
                            </td>
          </tr>
          <cfif IsDefined("form.ExpnsCntrb")>
              <tr id="CntrbErr">
                   <td colspan="2" class="Error"><cfoutput>#form.ExpnsCntrb#</cfoutput></td>
              </tr>
          </cfif>
          <tr id="expnContrib">
                  <td align="left" valign="middle" height="35" class="RptStd" colspan="2">Is expenditure a contribution to a candidate, officeholder, or political committee?    <input type="radio" name="rdoCntrb" value="Y" /> Yes    <input type="radio" name="rdoCntrb" value="N" /> No</td>
           </tr>
          <tr id="COHInfo">
              <td colspan="2" class="RptStd" align="left" valign="middle" height="35">
                  <input type="checkbox" name="chkCand" id="chkCand" value="X" onclick="if (this.checked) document.ExpnDtl.btnCOH.disabled = false; else document.ExpnDtl.btnCOH.disabled = true;" />Direct expenditure to benefit a candidate or officeholder    
                  <input type="button" name="btnCOH" value=" Enter C/OH Information " class="RptBtn" onclick="window.open('/Testing/Test_COHBenefit.cfm?Parent=' + document.ExpnDtl.ItemID.value + '&Type=EXPN&Form=' + document.ExpnDtl.ExpnCode.value, 'CandidateInfo', 'width=730px,height=475px,scrollbars,resizable,location')" disabled /> <a href="#" id="aDirExpn" onclick="ShowHelp('11')" style="border:none; display:inline; padding: 0px 0px 0px 0px"><img src="/images/Help_Icon.gif" height="14" width="13" border="0" /></a>
              </td>
         </tr>
         </table>
    Now whne the form is displayed on my page, I always see the line of text Description and the line of text Direct expenditure to benefit a candidate or officholder (in bold above).  But I never see the line of text  Is expenditure a contribution to a candidate... (in italics above).   It seems so simple but I can't figure out why that line does not display!!  Is there something wrong with that tr/td definition?

    Have you tried removing the ID?  Just to see if some CSS might be using that ID with a display:none or visibility:none statement?

  • Is there something wrong with a Oscar Gomez Fuentes 2Channel oscilloscope

    Is there something wrong with a Oscar Gomez Fuentes 2Channel oscilloscope or are my devices configured wrong. I have DAQCard-6036E and SCC-2345 with SCC-Ft01 and SCC-A10 modules. The problem is that when I am measuring with A10 it effects to FT01's RMS and DC values. But when I am measuring with Ft01 everything is ok. So what's wrong?? I attached a picture of a front panel.
    Attachments:
    front_panel.JPG ‏132 KB

    Neuvos,
    Do any of the signals you are measuring have high output impedances (> 1 kOhm)? If so, you may be seeing cross-talk (or ghosting). Below, I have included links to a number of documents that discuss this issue and methods for eliminating it:
    Data Acquisition: Troubleshooting Unexpected Voltages or Cross-talk in Analog Input Channels
    Using a Unity Gain Buffer (Voltage Follower) with a DAQ Device
    Is Your Data Inaccurate Because of Instr
    umentation Amplifier Settling Time?
    Good luck with your application.
    Spencer S.

  • Is there something wrong with my BT Vision.

    Is there something wrong with my BT Vision.
    It lists loads of programmes, but when I click them there are only a few episodes available.
    For example, I search for "Regular Show" using the Blue button and since I've had BT Vision (for a couple of months), only the same two episodes have ever appeared. 

    Hi McKenzieM,
    Welcome to the forum.
    I checked "Regular Show" and it looks like episodes 29 and 30 are currently available. I have sent this off to double-check this.
    Can you give me examples of what other programs are showing a few episodes so I can look into it?
    Thanks,
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Merged clips - are they all bugs or is there something wrong with my system?

    I have to use merged clips to sync video and audio because making every clip a sequence is too cumbersome and doesn't give me thumbnails to help choose my shots. Apparently, merged clips are very buggy. I can't use colored markers because they don't get saved on merged clips. I can't use match frame on merged clips because they don't find the correct frame. I can't set a poster frame on a merged clip except with the "in" marker. Are all those problems bugs, or is there something wrong with my specific system. I trashed preferences to fix another problem unrelated to merged clips, but that didn't solve any of the clip problems.

    I don't believe there's anything wrong with your system.

  • HT1567 I have itunes and have not seen any of the podcasts I download updated past May 8th. Is there something wrong with my itunes that the podcasts are not uploading to my pc?

    My itunes is not showing any of the podcasts I download past may 8th. Is there something wrong with my itunes?

    Seconding this -- no podcasts have updated past May 8th. What is going on Apple?!?

  • My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

Maybe you are looking for