Is there something wrong with my Macbook Pro's battery?

I have just gotten my macbook pro three months prior and all of a sudden the battery won't last as long anymore. At 90% is says it is estimated to only last 2 hours and 30 minutes. Do I need to have my computer checked out?

Download "coconut battery" fro macupdate.com.  This is the display on my system:
It tells me that I currently have a few more mAh than designed capacity (that particular number will vary but has not dropped below 6950 yet).
It will be a good "health" indicator of your battery, in combination with the "Condition" indicator you found before.

Similar Messages

  • Is there something wrong with my macbook?

    hello, i'm expericing a small problem with my macbook. This isn't a big issue, but it's bothering me. Here's the problem. Every time i boot up my macbook (for the pass week or so), the apple logo is slightly enlarged or squished like if it was in some sort of wide screen mode. i know this is not normal. its almost like we you boot up a PC in safe mode. i don't know how it got like this, or if i did something to mess this up. Is there any way i can change it back to normal with out losing my information? thanks to who ever answers.

    Download "coconut battery" fro macupdate.com.  This is the display on my system:
    It tells me that I currently have a few more mAh than designed capacity (that particular number will vary but has not dropped below 6950 yet).
    It will be a good "health" indicator of your battery, in combination with the "Condition" indicator you found before.

  • Is there anything wrong with my MacBook Pro?

    My battery is significantly worse than when I bought it in the summer of 2009. I understand that the battery doesn't hold the same capacity of the course of its life, but I want to see how bad or good this really is.
    The following are the settings on my MacBook Pro:
    -All three EnergySaver preferences checked.
    -Bluetooth OFF
    -Wifi ON
    -Brightness at 40%
    -Only using Safari and Mail
    After a full charger I only get 2:40 remaining battery life according to my Mac. Even when the battery icon appears 2/3 to 3/4 full it says I have 1:30 remaining. Is this really how bad the battery gets in the MacBook Pros? It still under AppleCare but I just don't know if this warrants a trip to the Apple Store. BTW, my full charge capacity is 5148(mAh) with 208 cycles.

    Hello there!
    Battery's preview of how long you will be ale to use it depends on the usage going on right at that time. You said you have safari open and if you're watching youtube/playing any flash game on safari it will definitely strain your battery juice! So just to be on safe side let's go through some process!
    1- Calibrate your battery and for instruction search on google and you'll find the link to apple site for detail procedure.
    2- While you're using you laptop on battery check activity monitor coz sometimes Mac OS goes through house maintenance and it will count up on high CPU usage which equals to high and faster draining of the battery! Good luck!

  • Is there something wrong with my brand new rMPB battery?

    I recently got my new rMBP and I am not sure if it has some sort of defective battery or not. I feel as though the battery discharges far too quickly, often going from 96% charge ("8:27 remaining") to 87% charge ("5:08 remaining) or so in a matter of thirty minutes, perhaps sometimes more. I wasn't sure if this was due to having Mavericks since I have read that there have been a lot of cases where Mavericks has been responsible for short battery lives, or something of the sort.
    I am sure that Chrome is responsible for the majority of the fast discharging of the battery, but  find it hard to believe that it would take up so much energy so fast.
    On a side note, I would like to know if there is a "better" way to charge the battery? Is it bad to have it plugged in the whole time? Should I only begin to charge it once it reaches 20% charge left or only charge it up to 80% charge to avoid overcharging? These are just some things I have read or heard here and there.

    DanielGiron wrote:
    I recently got my new rMBP and I am not sure if it has some sort of defective battery or not. I feel as though the battery discharges far too quickly, often going from 96% charge ("8:27 remaining") to 87% charge ("5:08 remaining) or so in a matter of thirty minutes, perhaps sometimes more. I wasn't sure if this was due to having Mavericks since I have read that there have been a lot of cases where Mavericks has been responsible for short battery lives, or something of the sort.
    I am sure that Chrome is responsible for the majority of the fast discharging of the battery, but  find it hard to believe that it would take up so much energy so fast.
    I would contact AppleCare and see what they have to say (90 days free phone support).
    On a side note, I would like to know if there is a "better" way to charge the battery? Is it bad to have it plugged in the whole time? Should I only begin to charge it once it reaches 20% charge left or only charge it up to 80% charge to avoid overcharging? These are just some things I have read or heard here and there.
    The info you're reading refers to older battery models. For current batts, you can charge them as often as you like; the only thing you don't want to do is let it sit for a year and go completely dead (this is not the same as letting it run down while you're using it until your MBP goes to sleep, that's fine).

  • Hello, I want to buy a macbook pro and I'm from Belgium. When there's something wrong with the macbook like the battery isn't that good anymore or another problem. Will I be able to fix my macbook at a Lab9 store, or send him to Apple?

    And will I also be able to do that with the AppleCare packet? Or only if I have this?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

    I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?

    It's also under the File menu.

  • What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

    What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

    Hello Alex,
    It sounds like you are getting excessive CPU usage when connecting an external display via HDMI to your computer. I would try the troubleshooting steps outlined in the article named:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the systemYou can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    Nah - that's just the normal boot process.
    Clinton

  • "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'.  Is there something wrong with the latest installer? (11.3.1)

    Getting error message as shown: "The file 'Acknowledgements.rtf' cannot be installed because the file cannot be found in the cabinet file 'iTunes.cab'.  Is there something wrong with the latest installer? (11.3.1)

    Installs fine for me, so I'd guess you got an incomplete or corrupt download. See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links and download a fresh copy of the installer.
    tt2

  • Is there something wrong with this table row definition?

    I have am supporting a coldfusion app that manipulates several forms.  One one particular page, there is a form that consists of several tables.  The last 3 lines of the last table are
        <tr>
                <td height="35" align="right" valign="middle">Description:</td>
                <td align="left" valign="middle"><input name="tmpPurpose" class="RptStd" size="70" maxlength="100" value="" onblur="document.ExpnDtl.Purpose.value = this.value;" onchange="ChkName(<cfoutput>#Session.CCWarn#</cfoutput>)" /><input type="hidden" name="Purpose" value="" />
                             <a href="#" id="aDesc" onclick="ShowHelp('9')" style="border:none; display:inline; padding: 0px 0px 0px 0px"><img src="/images/Help_Icon.gif" height="14" width="13" border="0" /></a>
                            </td>
          </tr>
          <cfif IsDefined("form.ExpnsCntrb")>
              <tr id="CntrbErr">
                   <td colspan="2" class="Error"><cfoutput>#form.ExpnsCntrb#</cfoutput></td>
              </tr>
          </cfif>
          <tr id="expnContrib">
                  <td align="left" valign="middle" height="35" class="RptStd" colspan="2">Is expenditure a contribution to a candidate, officeholder, or political committee?    <input type="radio" name="rdoCntrb" value="Y" /> Yes    <input type="radio" name="rdoCntrb" value="N" /> No</td>
           </tr>
          <tr id="COHInfo">
              <td colspan="2" class="RptStd" align="left" valign="middle" height="35">
                  <input type="checkbox" name="chkCand" id="chkCand" value="X" onclick="if (this.checked) document.ExpnDtl.btnCOH.disabled = false; else document.ExpnDtl.btnCOH.disabled = true;" />Direct expenditure to benefit a candidate or officeholder    
                  <input type="button" name="btnCOH" value=" Enter C/OH Information " class="RptBtn" onclick="window.open('/Testing/Test_COHBenefit.cfm?Parent=' + document.ExpnDtl.ItemID.value + '&Type=EXPN&Form=' + document.ExpnDtl.ExpnCode.value, 'CandidateInfo', 'width=730px,height=475px,scrollbars,resizable,location')" disabled /> <a href="#" id="aDirExpn" onclick="ShowHelp('11')" style="border:none; display:inline; padding: 0px 0px 0px 0px"><img src="/images/Help_Icon.gif" height="14" width="13" border="0" /></a>
              </td>
         </tr>
         </table>
    Now whne the form is displayed on my page, I always see the line of text Description and the line of text Direct expenditure to benefit a candidate or officholder (in bold above).  But I never see the line of text  Is expenditure a contribution to a candidate... (in italics above).   It seems so simple but I can't figure out why that line does not display!!  Is there something wrong with that tr/td definition?

    Have you tried removing the ID?  Just to see if some CSS might be using that ID with a display:none or visibility:none statement?

  • Is there something wrong with a Oscar Gomez Fuentes 2Channel oscilloscope

    Is there something wrong with a Oscar Gomez Fuentes 2Channel oscilloscope or are my devices configured wrong. I have DAQCard-6036E and SCC-2345 with SCC-Ft01 and SCC-A10 modules. The problem is that when I am measuring with A10 it effects to FT01's RMS and DC values. But when I am measuring with Ft01 everything is ok. So what's wrong?? I attached a picture of a front panel.
    Attachments:
    front_panel.JPG ‏132 KB

    Neuvos,
    Do any of the signals you are measuring have high output impedances (> 1 kOhm)? If so, you may be seeing cross-talk (or ghosting). Below, I have included links to a number of documents that discuss this issue and methods for eliminating it:
    Data Acquisition: Troubleshooting Unexpected Voltages or Cross-talk in Analog Input Channels
    Using a Unity Gain Buffer (Voltage Follower) with a DAQ Device
    Is Your Data Inaccurate Because of Instr
    umentation Amplifier Settling Time?
    Good luck with your application.
    Spencer S.

  • Is there something wrong with my BT Vision.

    Is there something wrong with my BT Vision.
    It lists loads of programmes, but when I click them there are only a few episodes available.
    For example, I search for "Regular Show" using the Blue button and since I've had BT Vision (for a couple of months), only the same two episodes have ever appeared. 

    Hi McKenzieM,
    Welcome to the forum.
    I checked "Regular Show" and it looks like episodes 29 and 30 are currently available. I have sent this off to double-check this.
    Can you give me examples of what other programs are showing a few episodes so I can look into it?
    Thanks,
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Merged clips - are they all bugs or is there something wrong with my system?

    I have to use merged clips to sync video and audio because making every clip a sequence is too cumbersome and doesn't give me thumbnails to help choose my shots. Apparently, merged clips are very buggy. I can't use colored markers because they don't get saved on merged clips. I can't use match frame on merged clips because they don't find the correct frame. I can't set a poster frame on a merged clip except with the "in" marker. Are all those problems bugs, or is there something wrong with my specific system. I trashed preferences to fix another problem unrelated to merged clips, but that didn't solve any of the clip problems.

    I don't believe there's anything wrong with your system.

  • HT1567 I have itunes and have not seen any of the podcasts I download updated past May 8th. Is there something wrong with my itunes that the podcasts are not uploading to my pc?

    My itunes is not showing any of the podcasts I download past may 8th. Is there something wrong with my itunes?

    Seconding this -- no podcasts have updated past May 8th. What is going on Apple?!?

  • My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

Maybe you are looking for

  • App resume fail with MediaCapture WP8.1

    Hi everyone, Which is the good place to initialize MediaCapture? I used Panorama theme to create a TorchControl and on itemPanorama_Loaded I set: MediaCapture mc = new MediaCapture(); await mc.InitializeAsync(); mc.Failed += new MediaCaptureFailedEve

  • Purchase order print preview

    Is it possible to create new tcode just for print preview only? As of now user must have authorization to tcode ME9F to preview and print. But now they are insisting of having authorization for print preview only.

  • ITunes & quicktime crashes

    Hi guys... I've recently installed iTunes & quicktime onto my laptop, however when trying to run either application they immediately crash on start up.. iTunes.exe give the error : "An unhandled win32 exception occurred in iTunes.exe [1132] and as i

  • How can I revoke S_CTS_ADMI from some users?

    Hi all, I want to revoke the authorization object S_CTS_ADMI from some users. In our environment, this authorization object is under T-D15000451 profile. Which transactions/steps are envolved to accomplish this? Thanks Fabio Neukirchen

  • CAF GP...

    Dear Friends,    What is this CAF GP...? Why and How it is used in SAP Netweaver? Regards Santhosh kumar.N