Is there standard function module to read "open office" in SAP

Hi All,
Is there any standard function module to read open office document from SAP.
Please confirm.
Thanks and best regards
Rajeev Chhabra

Hi all!
I have a similar problem. I need create a formatted spread sheet managed open office. The work sheet must be formatted.
I do not find the function module for doing this.
Do yo have any idea? The only thing I have found is the functionallity included in program BCALV_TEST_GRID.
Also I will need a function to upload the file to fill a table control.
Thanks in advance.
Cristina.

Similar Messages

Any standard function module to read data from a cube

Hi,
I want to read data from a cube say XYZ, into an internal table. Is there any standard function module to do this? If so can anyone plz tell me what change should i make in the function module for my requirement.
Regards
BW Fresher.

Hi R,
Try function module 'RSDRI_INFOPROV_READ'
ABAP Report RSDRI_INFOPROV_READ_DEMO contains an example of how the function module can be used.
Udo

Is there any function module which gives open invoices &open amount?

Hello All,
I want to use function module which gives open invoices with open amount.
I know 'CUSTOMER_OPEN_ITEMS' 'BAPI_AR_ACC_GETOPENITEMS' function which gives open invoices but does not give open amount.
Can anyone help me to find such function?

From this BAPI ,
BAPI_AR_ACC_GETOPENITEMS, You got amount for items in lc_amount field of lineitems table parameter.
I hope, it will helpful to you.
by
Prasad GVK.

Is there a Function Module to read all BOM Variants

Hi,
I have a requirement to read all the BOM variants of Engineering BOM through a Function Module and pass this information to Third Party Application.
Is there any such Function module/BAPI?
Need your expert advice.
Thanks and Regards,
OmPrakash

Hi ,
If you want to use 'CS_BOM_EXPL_MAT_V2' funtion to get the BOM components, you need to give the importing parameter mtnrv( material number).
the components are stored in TABLES : stb.
I am doing this way.
but werks, date , and capid are optional .
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
       EXPORTING
         mtnrv                 = i_matnr
         werks                 = i_werks
         datuv                 = i_date
         capid                 = l_capid
       IMPORTING
         topmat                = ms_cstmat
       TABLES
         stb                   = lt_stpox
       EXCEPTIONS
         alt_not_found         = 1
         call_invalid          = 2
         material_not_found    = 3
         missing_authorization = 4
         no_bom_found          = 5
         no_plant_data         = 6
         no_suitable_bom_found = 7
         conversion_error      = 8.
Please give it a try.
BR,
Ovidiu

Function module to read the the idoc

Hi abap gurus,
   I have an inbound idoc coming form a wms system .The IDOC is for goods recieved . how can I read the idoc to update the inbound delivery data in the sap system ? Is there any function module to read the data from teh inbound idoc ?

Hi Gaurab,
Creating a Function Module (Direct Inbound Processing)
This step describes how to create a function module which is identified by the IDoc Interface using a new process code and called from ALE (field TBD52-FUNCNAME). Direct inbound processing using a function module (not using a workflow) always includes the ALE layer. This setting (processing with function module and ALE layer) is identified by the value 6 in the field TEDE2-EDIVRS, which is read by the function module IDOC_START_INBOUND. IDOC_START_INBOUND then calls ALE.
Prerequisites
You must have completed the required steps in Defining and Using a Basic Type .
Procedure
Choose Tools ® ABAP Workbench ® Development ® Function Builder, and create a new function module.
Create the segments as global data in your function group. The function module should copy the application data from the segments into the corresponding application tables and modify the IDoc status accordingly. If an error occurs, the function module must set the corresponding workflow parameters for exception handling.
Activate the function module: From the initial screen of the Function Builder select .
In the example, create the function module IDOC_INPUT_TESTER with a global interface. The function module is called when an IDoc of type TESTER01 is received for inbound processing. You will assign an application object ("standard order") to this IDoc type and therefore maintain tables from SD. To do this, call transaction VA01 using the command CALL TRANSACTION. Please note that the intention here is not to simulate a realistic standard order, but only to illustrate how data reaches application tables from an IDoc table via segment structures (form routine READ_IDOC_TESTER) and how the function module triggers an event for exception handling (by returning suitable return variables to the ALE layer in the FORM routine RETURN_VARIABLES_FILL).
A comprehensive example of the code for an inbound function module is provided in the ALE documentation in the SAP Library under Example Program to Generate an IDoc. This function module, for example, also checks whether the logical message is correct and calls a (fictitious) second function module which first writes the application data and then returns the number of the generated document. In addition, status 53 is only set if the application document was posted correctly.
Administration parameters for IDOC_INPUT_TESTER
Application abbreviation
V (Sales and Distribution)
Processing type
Normal, start immediately
Interface for IDOC_INPUT_TESTER (global interface)
Formal parameters
Reference structure
Explanation
Import parameters
INPUT_METHOD
BDWFAP_PAR-INPUTMETHD
Describes how the function module is to be processed (example: in the background)
MASS_PROCESSING
BDWFAP_PAR-MASS_PROC
Mass inbound processing? (indicator)
Export parameters
WORKFLOW_RESULT
BDWFAP_PAR-RESULT
Set to 99999 if an event is to be triggered for error handling.
APPLICATION_VARIABLE
BDWFAP_PAR-APPL_VAR
Variable freely available from application for workflow
IN_UPDATE_TASK
BDWFAP_PAR-UPDATETASK
Asynchronous update? (indicator is not set in example)
CALL_TRANSACTION_DONE
BDWFAP_PAR-CALLTRANS
Transaction called? (indicator is not set in example)
Table
IDOC_CONTRL
EDIDC
IDoc control record
IDOC_DATA
EDIDD
IDoc data records
IDOC_STATUS
BDIDOCSTAT
IDoc status records for ALE
RETURN_VARIABLES
BDWFRETVAR
IDoc assigned to Object type method parameters.
SERIALIZATION_INFO
BDI_SER
If several IDocs are to be processed in a certain sequence: this structure contains the necessary information
Example
FUNCTION IDOC_INPUT_TESTER.
""Globale Schnittstelle:
*"       IMPORTING
*"             VALUE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*"             VALUE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*"       EXPORTING
*"             VALUE(WORKFLOW_RESULT) LIKE BDWFAP_PAR-RESULT
*"             VALUE(APPLICATION_VARIABLE) LIKE BDWFAP_PAR-APPL_VAR
*"             VALUE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*"             VALUE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*"       TABLES
*"              IDOC_CONTRL STRUCTURE EDIDC OPTIONAL
*"              IDOC_DATA STRUCTURE EDIDD
*"              IDOC_STATUS STRUCTURE BDIDOCSTAT
*"              RETURN_VARIABLES STRUCTURE BDWFRETVAR
*"              SERIALIZATION_INFO STRUCTURE BDI_SER
initialize SET/GET Parameter and internal tables
PERFORM INITIALIZE_ORGANIZATIONAL_DATA.
Move IDOC to internal tables of application
PERFORM READ_IDOC_TESTER.
call transaction Order Entry VA01
PERFORM CALL_VA01_IDOC_ORDERS USING ERRORCODE.
set status value
perform write_status_record using errorcode.
return values of function module
PERFORM RETURN_VARIABLES_FILL USING ERRORCODE.
ENDFUNCTION.
FORM INITIALIZE_ORGANIZATIONAL_DATA.
initialize SET/GET parameters
   SET PARAMETER ID 'VKO' FIELD SPACE.
   SET PARAMETER ID 'VTW' FIELD SPACE.
   SET PARAMETER ID 'SPA' FIELD SPACE.
   SET PARAMETER ID 'VKB' FIELD SPACE.
   SET PARAMETER ID 'VKG' FIELD SPACE.
initialize internal tables
   REFRESH BDCDATA.
   CLEAR BDCDATA.
   CLEAR BELEGNUMMER.
   CLEAR ERRTAB.
   REFRESH ERRTAB.
   REFRESH XBDCMSGCOLL.
   CLEAR XBDCMSGCOLL.
ENDFORM.                    " INITIALIZE_ORGANIZATIONAL_DATA
FORM READ_IDOC_TESTER.
PERFORM INITIALIZE_IDOC.
LOOP AT IDOC_DATA
   WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
    CASE IDOC_DATA-SEGNAM.
header data
      WHEN 'E1HEAD'.
        MOVE IDOC_DATA-SDATA TO E1HEAD.
        PERFORM PROCESS_SEGMENT_E1HEAD.
position data
      WHEN 'E1ITEM'.
        MOVE IDOC_DATA-SDATA TO E1ITEM.
        PERFORM PROCESS_SEGMENT_E1ITEM.
    ENDCASE.
ENDLOOP.
only when there were one or more items
CHECK FIRST NE 'X'.
APPEND XVBAP.                        "last one
ENDFORM.                    " READ_IDOC_TESTER
FORM INITIALIZE_IDOC.
CLEAR XVBAK.
REFRESH XVBAP.
CLEAR XVBAP.
POSNR = 0.
FIRST = 'X'.
ENDFORM.                    " INITIALIZE_IDOC
FORM PROCESS_SEGMENT_E1HEAD.
requested date of delivery
WLDAT = E1HEAD-WLDAT.
delivery date
XVBAK-BSTDK = E1HEAD-BSTDK.
customer number
XVBAK-KUNNR = E1HEAD-AUGEB.
order number
XVBAK-BSTNK = E1HEAD-BELNR.
division
XVBAK-SPART = E1HEAD-SPART.
distribution channel
XVBAK-VTWEG = E1HEAD-VTWEG.
sales organization
XVBAK-VKORG = E1HEAD-VKORG.
order type
XVBAK-AUART = E1HEAD-AUART.
do not fill incoterms (inco1, inco2)
customer function
CALL CUSTOMER-FUNCTION '001'
       EXPORTING
            PI_VBAK621           = XVBAK
       IMPORTING
            PE_VBAK621           = XVBAK
       TABLES
            PT_IDOC_DATA_RECORDS = IDOC_DATA.
ENDFORM.                    " PROCESS_SEGMENT_E1HEAD
FORM PROCESS_SEGMENT_E1ITEM.
position number
XVBAP-POSNR = XVBAP-POSNR + 1.
amount
XVBAP-WMENG = E1ITEM-MENGE.
unit
CALL FUNCTION 'ISO_TO_SAP_MEASURE_UNIT_CODE'
       EXPORTING
            ISO_CODE = E1ITEM-BMEINH
       IMPORTING
            SAP_CODE = XVBAP-VRKME
       EXCEPTIONS
            OTHERS    = 0.
material number
XVBAP-MATNR = E1ITEM-LMATNR.
CALL CUSTOMER-FUNCTION '002'
       EXPORTING
            PI_VBAP621           = XVBAP
       IMPORTING
            PE_VBAP621           = XVBAP
       TABLES
            PT_IDOC_DATA_RECORDS = IDOC_DATA.
APPEND XVBAP.
ENDFORM.                    " PROCESS_SEGMENT_E1ITEM
FORM CALL_VA01_IDOC_ORDERS USING ERRORCODE.
call transaction first dynpro
PERFORM DYNPRO_START.
call transaction double-line entry
PERFORM DYNPRO_DETAIL2.
incoterms
PERFORM DYNPRO_HEAD_300.
call transaction item datas
PERFORM DYNPRO_POSITION.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'SICH'.
determine input method
IF INPUT_METHOD IS INITIAL.
    INPUT_METHOD = 'N'.
ENDIF.
call transaction VA01
CALL TRANSACTION 'VA01' USING    BDCDATA
                         MODE     INPUT_METHOD
                         UPDATE   'S'
                         MESSAGES INTO XBDCMSGCOLL.
errorcode = SY-SUBRC.       " remember returncode for status update
ENDFORM.                    " CALL_VA01_IDOC_ORDERS
form write_status_record using errorcode.
FILL IDOC_STATUS
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IF ERRORCODE = 0.
IDOC_STATUS-STATUS = BELEG_GEBUCHT. "value 53
   GET PARAMETER ID 'AUN' FIELD BELEGNUMMER.
   IDOC_STATUS-MSGID = 'V1'.
   IDOC_STATUS-MSGNO = '311'.
   IDOC_STATUS-MSGV1 = 'Terminauftrag'.
   IDOC_STATUS-MSGV2 = BELEGNUMMER.
ELSE.
    IDOC_STATUS-STATUS = BELEG_NICHT_GEBUCHT. "value 51
    IDOC_STATUS-MSGID = SY-MSwGID.
    IDOC_STATUS-MSGNO = SY-MSGNO.
    IDOC_STATUS-MSGV1 = SY-MSGV1.
    IDOC_STATUS-MSGV2 = SY-MSGV2.
    IDOC_STATUS-MSGV3 = SY-MSGV3.
    IDOC_STATUS-MSGV4 = SY-MSGV4.
ENDIF.
APPEND IDOC_STATUS.
ENDFORM.
FORM DYNPRO_START.
PERFORM DYNPRO_NEW USING PROGRAMM_AUFTRAG
                           DYNPRO-EINSTIEG
                  CHANGING LAST_DYNPRO.
ordertype
PERFORM DYNPRO_SET USING 'VBAK-AUART' XVBAK-AUART.
sales organization
PERFORM DYNPRO_SET USING 'VBAK-VKORG' XVBAK-VKORG.
Distribution channel
PERFORM DYNPRO_SET USING 'VBAK-VTWEG' XVBAK-VTWEG.
Division
PERFORM DYNPRO_SET USING 'VBAK-SPART' XVBAK-SPART.
Sales office
PERFORM DYNPRO_SET USING 'VBAK-VKBUR' XVBAK-VKBUR.
Sales group
PERFORM DYNPRO_SET USING 'VBAK-VKGRP' XVBAK-VKGRP.
ENDFORM.                    " DYNPRO_START
FORM DYNPRO_NEW USING    PROGNAME
                         DYNPRONR
                CHANGING LAST_DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGNAME.
BDCDATA-DYNPRO = DYNPRONR.
BDCDATA-DYNBEGIN   = 'X'.
APPEND BDCDATA.
LAST_DYNPRO = DYNPRONR.
ENDFORM.                    " DYNPRO_NEW
FORM DYNPRO_SET USING    FELDNAME
                         FELDINHALT.
CLEAR BDCDATA.
CHECK FELDINHALT NE SPACE.
dynpro field name
BDCDATA-FNAM = FELDNAME.
contents
BDCDATA-FVAL = FELDINHALT.
APPEND BDCDATA.
ENDFORM.                    " DYNPRO_SET
FORM DYNPRO_DETAIL2.
okcode
PERFORM DYNPRO_SET USING 'BDC_OKCODE' PANEL-UER2.
fix dynpro number 4001
PERFORM DYNPRO_NEW USING    PROGRAMM_AUFTRAG
                               '4001'
                      CHANGING LAST_DYNPRO.
order party
PERFORM DYNPRO_SET      USING 'KUAGV-KUNNR' XVBAK-KUNNR.
purchase order number
PERFORM DYNPRO_SET      USING 'VBKD-BSTKD'   XVBAK-BSTNK.
requested delivery date
PERFORM DYNPRO_DATE_SET USING 'VBKD-BSTDK'   XVBAK-BSTDK.
purchase order date
PERFORM DYNPRO_DATE_SET USING 'RV45A-KETDAT' WLDAT.
ENDFORM.                    " DYNPRO_DETAIL2
FORM DYNPRO_DATE_SET USING    FELDNAME
                              FELDINHALT.
DATA: DATE TYPE D.
CLEAR BDCDATA.
CHECK FELDINHALT NE SPACE.
BDCDATA-FNAM = FELDNAME.
WRITE FELDINHALT TO DATE.
BDCDATA-FVAL = DATE.
APPEND BDCDATA.
ENDFORM.                    " DYNPRO_DATE_SET
FORM DYNPRO_HEAD_300.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' PANEL-KKAU.
incoterms part 1
IF NOT XVBAK-INCO1 IS INITIAL.
   PERFORM DYNPRO_SET USING 'VBKD-INCO1' XVBAK-INCO1.
ENDIF.
incoterms part 2
IF NOT XVBAK-INCO2 IS INITIAL.
   PERFORM DYNPRO_SET USING 'VBKD-INCO2' XVBAK-INCO2.
ENDIF.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'BACK'.
ENDFORM.                    " DYNPRO_HEAD_300
FORM DYNPRO_POSITION.
LOOP AT XVBAP.
dynpro item double line entry
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'UER2'.
    IF XVBAP-POSNR = 1.
material number
      PERFORM DYNPRO_SET      USING 'VBAP-MATNR(01)'   XVBAP-MATNR.
order quantity
      PERFORM DYNPRO_SET      USING 'RV45A-KWMENG(01)' XVBAP-WMENG.
desired delivery date
      PERFORM DYNPRO_DATE_SET USING 'RV45A-ETDAT(1)' WLDAT.
sales unit
      PERFORM DYNPRO_SET      USING 'VBAP-VRKME(1)'   XVBAP-VRKME.
    ELSE.
     PERFORM DYNPRO_SET      USING 'BDC_OKCODE'      'POAN'.
material number
      PERFORM DYNPRO_SET      USING 'VBAP-MATNR(02)'    XVBAP-MATNR.
order quantity
      PERFORM DYNPRO_SET      USING 'RV45A-KWMENG(02)' XVBAP-WMENG.
desired delivery date
      PERFORM DYNPRO_DATE_SET USING 'RV45A-ETDAT(02)'   WLDAT.
sales unit
      PERFORM DYNPRO_SET      USING 'VBAP-VRKME(02)'    XVBAP-VRKME.
    ENDIF.
ENDLOOP.
ENDFORM.                    " DYNPRO_POSITION
FORM RETURN_VARIABLES_FILL USING ERRORCODE.
allocate IDOC numbers to Workflow output parameters
IF MASS_PROCESSING <> SPACE.
    IF ERRORCODE = 0.
      RETURN_VARIABLES-WF_PARAM = PID.
      RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
      APPEND RETURN_VARIABLES.
      RETURN_VARIABLES-WF_PARAM = APO.
      RETURN_VARIABLES-DOC_NUMBER = BELEGNUMMER.
      APPEND RETURN_VARIABLES.
      WORKFLOW_RESULT = C_WF_RESULT_OK.
    ELSE.
      RETURN_VARIABLES-WF_PARAM = EID.
      RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
      APPEND RETURN_VARIABLES.
      WORKFLOW_RESULT = C_WF_RESULT_ERROR.
    ENDIF.
ELSE.
    IF ERRORCODE = 0.
      RETURN_VARIABLES-WF_PARAM = APE.
      RETURN_VARIABLES-DOC_NUMBER = BELEGNUMMER.
      APPEND RETURN_VARIABLES.
      WORKFLOW_RESULT = C_WF_RESULT_OK.
    ELSE.
      WORKFLOW_RESULT = C_WF_RESULT_ERROR.
    ENDIF.
ENDIF.
ENDFORM.                    " RETURN_VARIABLES_FILL
Globale Daten von IDOC_INPUT_TESTER
TABLES: E1HEAD, E1ITEM.
DATA: BEGIN OF BDCDATA OCCURS 500.
        INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF XVBAK.                 "Kopfdaten
     INCLUDE STRUCTURE VBAK621.
DATA: END OF XVBAK.
DATA: BEGIN OF XVBAP OCCURS 50.        "Position
       INCLUDE STRUCTURE VBAP.
DATA: WMENG(18) TYPE C.
DATA: LFDAT LIKE VBAP-ABDAT.
DATA: KSCHL LIKE KOMV-KSCHL.
DATA: KBTRG(16) TYPE C.
DATA: KSCHL_NETWR LIKE KOMV-KSCHL.
DATA: KBTRG_NETWR(16) TYPE C.
DATA: INCO1 LIKE VBKD-INCO1.
DATA: INCO2 LIKE VBKD-INCO2.
DATA: YANTLF(1) TYPE C.
DATA: PRSDT LIKE VBKD-PRSDT.
DATA: HPRSFD LIKE TVAP-PRSFD.
DATA: END OF XVBAP.
DATA: BEGIN OF DYNPRO,
      EINSTIEG          LIKE T185V-DYNNR VALUE 101,
      KKAU              LIKE T185V-DYNNR,
      UER2              LIKE T185V-DYNNR,
      KBES              LIKE T185V-DYNNR,
      ERF1              LIKE T185V-DYNNR,
      PBES              LIKE T185V-DYNNR,
      PKAU              LIKE T185V-DYNNR,
      PEIN              LIKE T185V-DYNNR,
      EID1              LIKE T185V-DYNNR,
      POPO              LIKE T185V-DYNNR,
      EIPO              LIKE T185V-DYNNR,
      KPAR              LIKE T185V-DYNNR,
      PSDE              LIKE T185V-DYNNR,
      PPAR              LIKE T185V-DYNNR,
      KDE1              LIKE T185V-DYNNR,
      KDE2              LIKE T185V-DYNNR,
      PDE1              LIKE T185V-DYNNR,
      PDE2              LIKE T185V-DYNNR,
      PKON              LIKE T185V-DYNNR,
      END OF DYNPRO.
DATA: BEGIN OF PANEL,
      KKAU              LIKE T185V-PANEL VALUE 'KKAU',
      UER2              LIKE T185V-PANEL VALUE 'UER2',
      KBES              LIKE T185V-PANEL VALUE 'KBES',
      ERF1              LIKE T185V-PANEL VALUE 'ERF1',
      PBES              LIKE T185V-PANEL VALUE 'PBES',
      PKAU              LIKE T185V-PANEL VALUE 'PKAU',
      PEIN              LIKE T185V-PANEL VALUE 'PEIN',
      EID1              LIKE T185V-PANEL VALUE 'EID1',
      EIAN              LIKE T185V-PANEL VALUE 'EIAN',
      POPO              LIKE T185V-PANEL VALUE 'POPO',
      EIPO              LIKE T185V-PANEL VALUE 'EIPO',
      KPAR              LIKE T185V-PANEL VALUE 'KPAR',
      PSDE              LIKE T185V-PANEL VALUE 'PSDE',
      POAN              LIKE T185V-PANEL VALUE 'POAN',
      PPAR              LIKE T185V-PANEL VALUE 'PPAR',
      KDE1              LIKE T185V-PANEL VALUE 'KDE1',
      KDE2              LIKE T185V-PANEL VALUE 'KDE2',
      PDE1              LIKE T185V-PANEL VALUE 'PDE1',
      PDE2              LIKE T185V-PANEL VALUE 'PDE2',
      PKON              LIKE T185V-PANEL VALUE 'PKON',
      KOAN              LIKE T185V-PANEL VALUE 'KOAN',
      END OF PANEL.
DATA: BEGIN OF ERRTAB OCCURS 20,
       TRANS LIKE TSTC-TCODE,
       ARBGB LIKE T100-ARBGB,
       CLASS(1) TYPE C,
       MSGNR LIKE T100-MSGNR,
     TEXT LIKE T100-TEXT,
       TEXT(123) TYPE C,
       MSGV1 LIKE SY-MSGV1,
       MSGV2 LIKE SY-MSGV2,
       MSGV3 LIKE SY-MSGV3,
       MSGV4 LIKE SY-MSGV4,
      END OF ERRTAB.
*---- Hilfsfelder     -
DATA: PROGRAMM_AUFTRAG LIKE T185V-AGIDV VALUE 'SAPMV45A'.
DATA: LAST_DYNPRO      LIKE T185V-DYNNR,
      WLDAT            LIKE VBAK-BSTDK,
      POSNR            LIKE VBAP-POSNR,
      FIRST(1)         TYPE C VALUE 'X'.
DATA: BEGIN OF XBDCMSGCOLL OCCURS 10.
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF XBDCMSGCOLL.
Terminauftrag ( Auftragsart wird fest gesetzt !)
DATA:   BELEGNUMMER LIKE VBAK-VBELN.
DATA:   ERRORCODE LIKE SY-SUBRC.
Statuswerte fuer IDOC-Status
DATA:   BELEG_NICHT_GEBUCHT LIKE TEDS1-STATUS VALUE '51'.
DATA:   BELEG_GEBUCHT       LIKE TEDS1-STATUS VALUE '53'.
*- Direktwerte für Return_variables -
data:
    eid like bdwfretvar-wf_param value 'Error_IDOCs',
    pid like bdwfretvar-wf_param value 'Processed_IDOCs',
    apo like bdwfretvar-wf_param value 'Appl_Objects',
    ape like bdwfretvar-wf_param value 'Appl_Object'.
*- Direktwerte für Workflow_Result -
DATA: C_WF_RESULT_ERROR LIKE BDWFAP_PAR-RESULT VALUE '99999'.
thanks
karthik
DATA: C_WF_RESULT_OK    LIKE BDWFAP_PAR-RESULT VALUE '0'.

Function modules to read ibase at runtime

Hi guru's,
Is there any function modules to read ibase at run time if yes please send those function modules its urgent please please.
regards
naveen kumar

answered

Any function module to read all the values in Tcode-PPQD?

Hi all
Is there any function module to read all the values in Tcode-PPQD (Display Qualifiaction Catalog).
and any idea what tables are involved to get these values like parent and child relationship?
Thanks in advance.
Murali.

Murali,
you can use the following..
data: w_sobid type sobid, "Qualification ID
      w_objid type objid. "Qualification Catalog
select objid into w_objid
              up to 1 rows
              from HRP1001
             where otype = 'QK'
               and plvar = '01'
               and istat = 1
               and risgn = 'B'
               and relat = '030'
               and endda ge sy-datum
               and begda le sy-datum
               and sclas = 'Q'
               and sobid = w_sobid.
endselect.
if sy-subrc eq 0.
write: / w_objid,w_sobid.
endif.
Regards,
Suresh Datti

Function Module to calculate Open Contract Quantity

Hi All,
Is there a function module to calculate Open Contract Quantity?
Thanks.

Hi Ravi,
Thanks for the reply.
For this FM, i need to pass the Sales Doc Number. Is there an FM where i can pass the contract number?
Best regards,
Sindy

Function module to read 'Customer Material InfoRecords'?

Is there a function module to read customer material inforecords?
Transaction code VD53 is the display screen for Customer Material INforecords. I have a requirement to read this data in user exit.
Thanks
Gova

I found one FM. RV_CUSTOMER_MATERIAL_READ
But it won't serve my purpose as I need to find customer material number for a given material number.
But, I found the table where this information is stored. KNMT. I'm going to create a custom FM to serve my purpose.

Function module to read Comma Seperated File (CSV)

Hi,
Is there any Function module to read CSV file from presentation server or Application server?
Regards,
Madhu

Hi madhukeshwar,
1. Exactly for this purpose,
i have developed an independent FORM
where we give inputs
a) file name (eg. abcd.txt)
b) separator (eg , COMMA in your case)
c) internal table (eg. t001)
2. It will provide the data
in proper format
(no matter what the separator)
(it can work with any kind of separator)
3. just copy paste in new program.
REPORT abc.
change your table declaration and file name
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
PERFORM myupload TABLES t001 USING 'd:\t001.txt' ','.
BREAK-POINT.
in debug see t001
INDEPENDENT FORM
FORM myupload TABLES orgtab
USING filename separator.
Data
DATA : BEGIN OF itab OCCURS 0,
myline(1000) TYPE c,
END OF itab.
DATA : extension(5) TYPE c.
DATA : name(100) TYPE c.
DATA : newfilename TYPE string.
Step 1
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = filename
TABLES
data_tab = itab.
Step 2
LOOP AT itab.
REPLACE ALL OCCURRENCES OF separator IN itab-myline WITH
cl_abap_char_utilities=>horizontal_tab.
MODIFY itab.
ENDLOOP.
Step 3
DATA : path LIKE pcfile-path.
path = filename.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
extension = extension
name = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
invalid_drive = 1
invalid_extension = 2
invalid_name = 3
invalid_path = 4
OTHERS = 5
Step 4
newfilename = filename.
REPLACE name IN newfilename WITH 'temp'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = newfilename
TABLES
data_tab = itab
FIELDNAMES =
Step 5
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = newfilename
has_field_separator = 'X'
TABLES
data_tab = orgtab.
ENDFORM. "myupload
3.
regards,
amit m.

Function module to read the expired useful life of asset

Hi,
Is there a function module to read the expired useful life of asset. We are using the depriciation start date to calculate the expired useful life of asset, but the fiscal year shift and matching the calendar year with fiscal is causing the logic to give a month difference between the calculated value and the value in the asset.
Please let me know if there is a Function module or BAPI for getting the values. Kindly provide example for the function module call too.
Regards,
Prabaharan.G

Hi,
Check the following function modules.
AISC_CALC_EXPIRED_USEFUL_LIFE.
Check the following link it might be of some help to you.
Re: asset useful life
Regards,
Ram.

Function module to read Lock objects

Hi all,
I'm doing a generic search program for all the objects..
Is there any function module to read Lock objects....
that is to know wat r all the tables and Lock parameters are there in a lock object

Hi Gayathri
Please read the table DD25L with AGGTYPE = 'E' to get all the lock object names in the field VIEWNAME. Use these lock object to read the table DD27S to get the fields present in these lock objects.
Hope this helps !
Regards
Ranganath
PS : Reward points for all useful answers !

Function Module to read Timeseries data in SNP

Hi Gurus,
Is there a function module to read timeseries KF (in SNP book)? I need to use this in deployment userexit to read time series values of other Product/Location combination.
I tried using 'BAPI_PBSRVAPS_GETDETAIL2' with in the userexit but i got simsession error.
Thanks,

Hi BKN,
Check the below function modules,
1) /SAPAPO/OM_STOCK_TSERIES_GET
2) /SAPAPO/RET_DB_GET_TIMESERIES
3) /SAPAPO/SCC_SHOW_TIME_SERIES
4) /SCA/INTF_APO_TS_TIMESERI_READ
Regards
R. Senthil Mareeswaran.

Function Module to read tax in FB60

Hi Gurus,
Is there a function module that reads the values in the folder "taxes" (tax amount) during the recording FB60?
I need something similar to function module FI_WT_GET_X_WITH_ITEM.
Thanks
Nik

Hi Nocola,
Try using this Function Module CALCULATE_TAX_FROM_NET_AMOUNT.
Thanks and Regards
Rinzy Deena Mathews

Function module to read all the views of material data

Dear all ,
       Is there any function module to read all the views of material data ?
       Like we have MATERIAL_MAINTAIN_DARK for updating all the views of material data , I need a function module to read all the views of material master.
Thanks & Regards
Shivanand

Hello,
Check these BAPI'S
<b>BAPI_MATERIAL_DISPLAY          Display Material
BAPI_MATERIAL_GET_DETAIL       Determine Details for a Material</b>
Regards,
Vasanth

Is there standard function module to read "open office" in SAP

Similar Messages

Maybe you are looking for