Is there support to stereo mix record channel for windows vista or at least XP ?

i have lenovo N500 and conexant HD smartaudio 221 on board with windows vista.
i read somewhere that smartaudio don't support stereo mix record channel in their driver for vista.
do they support the stereo mix record channel for windows XP ?
(i tried to ask them in their site, but couldn't manage to do that)

Similar Messages

  • Is there a way to have some sort of stereo mix audio input for mac?

    Is there a way to have some sort of stereo mix audio input for mac? also so i can have a voice over?

    polyglotinc wrote:
    Actually, after scouring the web, I see that RogueAmoeba also has a free utility called LineIn which simply sends the audio in to the audio out and doesn't interfere with other programs like iTunes!
    On the other hand, after downloading and trying it, there is a noticeable latency between what goes in and what comes out.
    The latency is in the computer, not the software. Most of the latency is in the A/D and D/A conversion.
    You need to connect the analog input to the analog output directly to get zero latency.
    Check this page:
    http://forums.macrumors.com/showthread.php?t=368834

  • Is " stereo mix" missing  in your  windows 7 on late 2009 imac 24 or 27 ?

    I have a imac 27 running Windows 7 64bit and no stereo mix option.
    I am a professor and when I do screen capture of scientific clips I need I can't get audio to record except by the imac mic from the speakers rather than directly.
    That destroys the sound quality.
    I have tried to download other sound card drivers and still no stereo mix recording or stereo mix playing options in sound!
    I have the fairly useless digital audio s/pdif but not the stereo mix which is really needed in all kinds of recording applications.
    I also downloaded the cirrus logic drivers shown in another thread for macbook users, but still no stereo mix.
    Any idea for a fix?
    This is an important basic function for any computer, and I can't understand why this is not supported yet?
    Apple has used bootcamp to attract Windows users who want to use Windows natively. This is one of the most basic function, full audio capability.
    This problem as well the cpu going 20 percent higher just plugging in a headphone, and the fact that the trrs headphone jack does not work on a trrs headset in windows 7 (including mic) is a real negative. The trrs headset like the iphone headset works fine with its mic in the mac side but not in windows side.
    Drivers to make the basic hardware in an imac or macbook work in windows 7 shouldn't be rocket science. We need apple support or an innovative person out there to solve these problems.
    If anyone reading this has the stereo mix on the w7 side, please let me know on this thread and maybe I can duplicate it on mine.
    If not, we know this problem exists for every windows 7 bootcamp user.
    Thanks!
    Best to all
    Dr. Duke

    Generic, yes, but didn't take into account EFI64 (UEFI 2.x) req'd to native boot a 64-bit DVD of Vista SP1 or later. Apple has a list of those that are supported (actually, a list of UN-supported).
    http://jowie.com/blog/post/2008/02/24/Select-CD-ROM-Boot-Type-prompt-while-tryin g-to-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx
    A tutorial from MacBook Pro owner and 64-bit install:
    http://deseloper.org/read/2009/05/windows-7rc-x64-with-boot-camp/
    FAQ, Updates, etc http://www.apple.com/support/bootcamp
    System Requirements: http://support.apple.com/kb/HT1899
    Windows 7 FAQ: http://support.apple.com/kb/HT3986
    List 64-bit Compatible: http://support.apple.com/kb/HT1846
    Boot Camp 64-bit 3.1 http://support.apple.com/kb/DL979
    Boot Camp Vista Upgrade Utility http://support.apple.com/kb/DL977
    iMac (27-inch, Late 2009) displays a black screen during installation of Windows 7 using Boot Camp
    http://support.apple.com/kb/TS3173
    Windows7news: Fix for Vista Upgrade to 7 :
    +Vista users who tried to perform an upgrade to Windows 7 were experiencing an error at exactly 62% of the update.+
    Windows performed an automatic rollback to Windows Vista at this point leaving the user puzzled and confused. Some users even experienced an endless reboot problem which would initiate the upgrade process again only to fail again at 62%.
    Vista user needs to click on the Fix-It button on the Microsoft support website after the upgrade failed at 62% to fix the issue and initiate the upgrade again.
    http://support.microsoft.com/kb/975253

  • BDB support for Windows Vista, WIndows 7 and Windows Server?

    Hello,
    I examine to use BDB on Windows, and I have a question.
    There's a description about supported OSs on the BDB reference guide as follows;
    Where does Berkeley DB run?
    The Berkeley DB distribution includes support for Windows/95, Windows/98, Windows/NT, Windows/2000 and Windows/XP, via the Microsoft Visual C++ 6.0 and .NET development environments.
    Does BDB distribution supports for Windows Vista and Windows Server 2003?
    And it will support Windows Server 2008 and Windows 7?
    I believe that BDB does not depend on specific function of Windows, thus there's no problem to support them...
    Regards,
    Akira

    Yes, we have a plan about BDB support for Windows Vista, Windows 7 and Windows Server. Once we are ready, we'll let you know here.
    Hi Vit,
    For Berkeley DB XML questions, please go to the Berkeley DB XML forum at: Berkeley DB XML
    By the way, I learnt there's a XP-compatible mode in Windows 7. You may want to try DB-XML with that.
    Best regards,
    Chao Huang
    Oracle Berkeley DB

  • "iTunes 7.6 or later is supported with any 64-bit edition of Windows Vista.

    "iTunes 7.6 or later is supported with any 64-bit edition of Windows Vista. The installer for 64-bit Vista is named iTunes64Setup.exe instead of iTunesSetup.exe. For more information see http://docs.info.apple.com/article.html?artnum=301301"
    So now you iPod Shuffles will work! No more returning them to Apple!

    I can now setup iTunes on my 64 bit Windows Vista. I've also brought over my library via the home network from my old Windows XP computer (although I needed to use Add folder to Library as the songs were not automatically recognised in the library). However, I can't get the i-Pod to load. At first I got a message saying that I needed to download a driver and now there is no recognition of the iPod at all when I connect. Is there anything I can do?

  • I can not upgrade to quicktime 7.7.3 for windows vista.  Error message says there is a problem with the program installer.  Any clue as to how to get around this.

    I can not download quicktime 7.7.3 for windows vista.  The error message says that there is a problem with the windows installer.  Any clues?

    The error message says that there is a problem with the windows installer.
    What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

  • Is there port of "HP Printer Control " app for Windows Phone?

    Are there port of "HP Printer Control " app for Windows Phone? This is at the same time request if there is not.
    Regards.

    Hello Zubru,
    I saw your post, good question! There are no apps at this time available for the windows phone however here is the link to the HP ePrint site to keep an eye out for any possible changes to that.
    Click the KUDOS star on the left to say “thanks” for helping!
    Please mark a reply “Accept as Solution” if it solved your issue so others can find it.
    I work on behalf of HP.
    I worked on behalf of HP.

  • Officially supported JRE for Windows Vista

    Hi,
    Please let me know the officially supported JRE/JDK version for Windows Vista. Does JDK1.4.2 _XX supports Windows Vista?
    Regards,
    Raj

    I think the real question is does ANYTHING workon
    Vista?Well, my java code works fine on Vista, as an
    application, and as an applet, developed using
    eclipse, also running on Vista.
    So clearly, SOMETHING does run on Vista, and works
    very nicely thank you!Wow, you should call Microsoft. I'm sure they offer a
    prize for the first app to run on Vista. Sorry, I'm
    being cynical today. Anyway, every person I know
    that's upgraded to Vista is real, real sorry.
    Existing software and hardware no longer working is
    the biggest problem.Yeah, today I was on Microsoft's side, but that is not the normal 'me'!
    However, Vista does look gr8, and if you only run 1. my app (www.j2e.com), 2. Eclipse, and 3. browsers, Vista doesn't seem to break!

  • How to link two recording channels for stereo?

    I have a zoom 6 interface which naturally records vocals in stereo with audition with its built in stereo
    Mic. However, I have an external stereo mic which connects to two different inputs on my interface.
    I want to link these two inputs in audition to record in stereo without recording two separate busses.
    How can I do this?
    Thanks!

    You need to select a stereo input option in the channel sources choice on the track control panel (LHS). If it's possible to pair the two inputs, then this is where you do it.
    Alternatively, just don't bother! Simply record two mono tracks and mix them down to a stereo track afterwards. Mind you, if you are recording vocals like this, then there really isn't a lot of point, as your voice is mono anyway, and you only really need a single output from the mic - one side or the other would do. If you are recording ambient sound, then okay, stereo - but you really don't need that for a single voice.

  • Need 'What You Hear' recording option for Notebook(Vista)-Does Xi-Fi for Notebooks provide th

    Hi,
    I have an Audigy sound card on a Dell desktop and it has the "What You Hear" recording option within Vista. I need the same option for my Dell Notebook, unfortuntately, this notebook uses a Sigmatel card within the motherboard. What device or application to i need to buy in order to get the "What you Hear" recording option to be available?
    What am i attempting to do?I often record li've webcasts in which the video portion comes through a Li've Meeting or Lotus Same time application using a Screen Recording Application?BUT the Audio comes from a conference which i use a VoIP software to dial into. I need to be able to record the sound that's been generated through my computer as an internal source. I need to be able to select 'What You Hear' as the default recording device so that the screen recording application i use can also record the audio been played through the PC?Appreciate any help here. Thanks?Kevin

    If it'sis not a Creative card, "what u hear" will be called something different. Maybe "stereo mix" or something else. The device just records anything coming from the soundcard. Play around and see if you don't have something similar to "what u hear" with a different name.

  • A Troubleshooting Guide for Windows Vista and iTunes 8 - user supported

    ITunes 8 and Windows Vista can be an explosive combination. Having helped to troubleshoot some problems for people, I decide to consolidate my information all down to one post. The information comes from various sources, and I will try to annotate where it came from. Please let’s keep this a solutions listing post. So people can come to it when they have a problem and easily find a solution.
    *ITunes will not install:*
    ITunes will sometimes not install or the installation will hang up under Vista. First I will give some generalized steps to take in order of priority, and then get into some specifics.
    General
    *1. Turn off your Anti-Virus Software.* Some A/V software will prevent the installer from accessing the Windows System Files causing the install to Bork.
    *2. Uninstall third-party Audio-Video Codecs.* Installing iTunes also installs Quicktime which installs the necessary codecs to play its supported files. Some codec packs, such as DivX and XviD have the ability to read these files, and their method of decoding these files can cause conflicts with the Quicktime installation. Even third-party CD Burning (Roxio, Nero, and the like) software can cause this problem. Once iTunes is installed, you can reinstall these codecs without any ill effects.
    *3. Disable Windows Defender.* Windows Defender is a resident A/V type program native to Windows Vista. It can also sometimes cause conflicts during installation. To disable it, go to the Windows Defender tab in your Control Panel, and chose disable in the dialogue box.
    Specific
    *1. When I install iTunes, the installation stops and I get error message 2738.* This error message means that the Visual Basic Script is not being installed properly or it could be disabled. To fix this we need to re-initialize the Visual Basic Script server. Do the following:
    In the search panel of the start bar, type cmd.exe.
    When the search results are listed, right click on cmd.exe and select run as administrator.
    Type in the following at the command prompt: regsvr32 vbscript.dll and hit enter.
    Run the iTunes install program again.
    *2. ITunes installed properly, but now I am stuck in a reboot loop.*
    This behaviour is a known problem to Apple and they are working on it. What is happening, when you run the program, it is involking a repair check of your installation. Beaconfield came up with a work around to use until Apple patches the software.
    “Navigate to C:\Program Files\iTunes\ and right click on iTunes.exe then select Sent To > Desktop. This will create a new icon that should load iTunes just fine.”
    I know there are more issues out there, but these seem to be the most common. If anyone has anymore solutions, please add them to this post. Like I said initially, I would like this post to be an easy reference for troubleshooting.
    Thanks again,
    linesma
    Message was edited by: linesma

    Ok, so I saved my Windows Media Player playlist as M3U files and imported them into iTunes. Wow! What a complete mess that made of my library.
    All songs that were on the playlists (hundreds of songs) were duplicated in my iTunes library. iTunes would show two entries for each song. When I right clicked and choose 'Show in Windows Explorer' both entries point to the same song, it just shows up twice in iTunes.
    I cleared my iTunes library file and am starting over. I'm thinking about just going back to Windows Media Player. I've been listening to music off my Blackberry and it's really been fine. Just seemed a shame that my iPod was sitting in a drawer because of all the issues I'm having with iTunes and Vista.
    The original problem I had months ago was that iTunes crashed on Vista and lost all my Playlists. I was so upset I put all my music on my SD card on my Blackberry, because Windows Media Player makes it so easy to back up your playlists. They are saved as files and can be included in any automatic backups (I have scheduled backups to another hard drive)
    I thought with this new version of iTunes I could at least export the playlists to files so they can be backed up, I just don't know if I can face re-creating the playlists in iTunes.

  • IPod Shuffle Reset utility- is there a file for Windows Vista users?

    Hi. I recently bought a new computer with a Windows Vista operating system. I am trying to set up my iPod Shuffle (first generation) to synchronize with my newly installed iTunes version 8. Is there any support for this operating system? I desperately need assistance!

    See here: Restoring iPod shuffle to factory settings
    B-rock

  • Are there previous versions of icloud control panel available for Windows Vista x64?

    I have had icloud 2.1.3 running on my pc for years (up to tonight). I uninstalled it from my computer in hopes to update the software. Unfortunately, I learned that the latest version of the icloud control panel is only compatible with Windows 7/8. I contacted Apple support to re-download the software and I'm being told that there's no way to obtain a previous version. ***? Does apple honestly leave consumers of their products high and dry like that? Wow!
    Does anyone know of a trustworthy source to re-download previous versions of icloud control panel that are compatible with Windows Vista x64?

    I does work, I also had it on my PC/Vista, but had to reformat and now I cannot find it....sheesh

  • No PKCS#11 support in JDK 6 Update 14 for Windows x64?

    Hi there,
    I successfully installed GlassFish 2.1 on Windows 2008 x64 with JDK 6 Update 13 for x64. Everything was ok until I wanted to access my USB token with a certificate on it trough an EJB.
    I then had to reinstall everything based on 32-bit versions. Now it works again, but I'm not very satisfied with the solution because I wanted to have everything based 64-bit.
    Why JDK 6 Update 14 for Windows x64 does not contain PKCS#11 support? When you have look to the x86 version support is available there.

    If you load successfully your pkcs11 lib into java 32bit mean that the lib is 32bit.
    You cannot load a 32bit native lib into java 64bit ( http://java.sun.com/docs/hotspot/HotSpotFAQ.html#64bit_native_porting ).
    If you find the 64bit lib for your token, you should be able to use java64.

  • Quicktime support for Windows Vista  64 bit OS

    Are there plans to support the Windows Vista 64 bit operationg system?

    Yes, I also got the instruction from the installer to "use the 64-bit installer", but there doesn't seem to be one. APPLE - ARE YOU LISTENING HERE? Strange that your installer gives seemingly impossible instruction.

Maybe you are looking for