Is there suppose to be a charging light when using the power adaptor?

I just bought the power adaptor for my ipod shuffle 2nd generation. I plugged the adaptor in the wall, connected my usb line , plugged in my ipod and there is no charging light to indicated if the ipod is charging. Should there still be an amber light to let me know if the ipod is charging with the power adaptor or not?

I just bought the power adaptor for my ipod shuffle
2nd generation. I plugged the adaptor in the wall,
connected my usb line , plugged in my ipod and there
is no charging light to indicated if the ipod is
charging. Should there still be an amber light to let
me know if the ipod is charging with the power
adaptor or not?
YES! There certainly should... I have an older version Apple Power Adapter (for the iPod Photo) and it lights up my Shuffle's status light.

Similar Messages

  • Green flashing re-charge status while using (Denki) power adaptor

    Ipod 30Gb Video 5G is showing a green flashing re-charge status when connected to a power adaptor.
    Is this natural, or am I frying my ipod?
    Cannot find any such description in the manual.
    Flash is green/white, and not green/amber as described elsewhere, while showing the lightening bolt.
    Dell Dimension Windows XP
    Dell Dimension   Windows XP  

    Ipod 30Gb Video 5G is showing a green flashing re-charge status when connected to a power adaptor.
    Is this natural, or am I frying my ipod?
    Cannot find any such description in the manual.
    Flash is green/white, and not green/amber as described elsewhere, while showing the lightening bolt.
    Dell Dimension Windows XP
    Dell Dimension   Windows XP  

  • When using my power adapter, the light is green for a two seconds and turns red.

    When using the power adapter for my MacBook 2.1, the little light on the connector is green for 2 or 3 seconds and then turns red.  I bought a new adapter, but it is the same thing. It looks like the computer is charging.  What's wrong with it.

    Nothing wrong. Here is what Macbook manual has to say:
    When you first connect the power adapter to your computer, an indicator light on the
    power adapter plug starts to glow. An amber light indicates that power is going to the
    battery. A green light indicates that no power is going to the battery, which can mean
    the battery is fully charged, is not installed, or has a problem. If you don’t see a light,
    your plug probably isn’t seated correctly. Check for any debris and remove it. You can
    monitor the battery level using the Battery status menu in the menu bar or by
    checking the battery level indicator lights on the bottom of the battery (see page 74).

  • Can you turn off the charging feature when using accessories?

    Can you turn off the charging feature when using accessories with the iPad?

    You cannot overcharge the battery when using the power adapter. Once the battery is fully charged, the iPad will no longer continue to charge if it is still connected. I leave my iPad on the power adapter for hours on end - on weekends when I am not at work.
    iPad - Charging the Battry
    http://support.apple.com/kb/HT4060
    About the iPad Battery
    http://www.apple.com/batteries/ipad.html
    These are both worthwhile reading for concerns about the battery and how to properly maintain it.
    I know nothing about external speakers with the iPad since I do not use them - but If the speaker is with a dock of some sort that charges the iPad - you should have no worries. If it is a dock that charges the iPad - I know of no way to turn off the charging feature, but it will not shorten the life of the battery anyway as long as the battery is properly maintained and cared for.
    Message was edited by: Demo

  • I was not using my Iphone for some time and when i charged it for use the screen is not lighting up. the image is very dim . Please assist to correct this situation., I tried to increase the brightness.no use.

    Iphone 3 GS was not being used for some time. When I charged it for use the screen is not becomeing bright. The images are very dim although i increased the brightness. Pls assist.

    Since it's a new machine, contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. That also might apply to newly bought ones inside the first 90 days.
    FWIW, IMO, the AppleCare extended plan's the cheapest insurance you can get for your new desktop machine.

  • Keeping zen micro backlight on when using the car charg

    Is there any way to keep the backlight on, when using the car charger. I have my zen micro hooked up the my car stereo. It would be nice to be able to see the screen at night. The lights for the buttons stay lit, but not for the screen.

    RMSkater: There's no "always on" setting. This is for good reason I think as the type of light Creative use will wear out with a few thousand hours of use, which will get eaten up relati'vely quickly if "always on". At least I believe that's what Creative have said in the past.

  • Iphone 4 will not charge but when i hold power button it the batt comes on and the plug and the lighning bolt shows up

    iphone 4 will not charge but when i hold power button it the batt comes on and the plug and the lighning bolt shows up. i tried different chargers wall and computer and tried soft reset, the phone died on its own it was jailbroken. but with the batt sing and the plug with the lightning bolt tells me the batt is still vholding charge.

    Hello!
    i know a place where they can look at your phone. It's call DoctorApple. i went there to repair my phone. this is their phone number : 514 234-2851

  • I have an ipad mini that won't power on. It was turned off to charge overnight. In the morning it was warm and now won't turn on no matter what I do. I've tried resetting using the power / home button combination and nothing works.

    I have an ipad mini that won't power on. It was turned off to charge overnight. In the morning it was warm and now won't turn on no matter what I do. I've tried resetting using the power / home button combination and nothing works.

    If you have owned the device, as in purchased from Apple, less than a year then there will be no charge to repair, or most likely, replace the device. If you have had the device more than a year you will be charged an out of warranty cost for replacement ($219 I think) and that is much cheaper than a new device. If you have Applecare+ then you have an additional year of coverage and the replacement will be $49 or $79 depending on when you got the Applecare.

  • Is there a flash when using the camera on the iPad?

    Is there a flash when using the camera on the iPad?

    Unlike iPhone, there's no LED flash on iPad. But iPad's specs indicate that it does have a backside illumination sensor to increase the amount of light captured and thereby improve low-light performance. Apple say:
    "The 5‑megapixel iSight camera features a backside illumination sensor that captures great-looking pictures whether by sunlight or candlelight." (Source)

  • HT4060 Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port?

    Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port?  Or do I need to purchase one of those cigarette lighter charging devices?  Thanks!

    You'd have to read your car manual but chances are it won't put out enough power for the iPad. The car is likely set up to charge a phone, most of which typically want half the power an iPad wants.
    I think your  options are to get a cigarette lighter looking charger, making sure it's powerful enough for an iPad...or you can get power inverters for about $25, where they plug into the cigarette lighter/power point and have a normal household type outlet on the other end. Then you'd just plug your charger  in like you would at home.
    Another option would be to look for something like a Zagg Sparq, which is a battery operated charger...plug the Sparq into the outlet at home. Its battery holds a charge and you can use that to charge your device. (zagg isn't the only manufacturer of such a device, Targus has one as well). Just look for portable chargers.
    The key to remember is to make sure it's rated for an iPad, which will want more power than a cell phone.

  • When my battery is fully charged and i remove the power lead the computer shuts down

    When my battery is fully charged and i remove the power lead the computer shuts down, evan when the power lights are fully green on the charger and the battery pack indercating lights.
    Regards

    I have exactly the same problem, which started again yesterday; coincidentally the day my warranty ran out!
    The situation is complicated for me because I live in rural lincolnshire, but was in London all summer and had a new logic board replaced under warranty last month at the London- Stratford store.
    It seems the £400 logic board replacement didn't fix it. When I try to get support, the website just laughs at me and holds out the cup for more money.  I had a chat with somebody in the store this evening and I've got to take it into a store AGAIN!
    Perusal of the 'Support' pages turns up literally thousands of people who have this or similar faults, all the way back to 2006, and I've not seen anything yet indicating that Apple have got a grip of it.
    I've been using Apple kit for 16 years now and I've never had any trouble until now, but this bloody laptop, which is no better than my iMac now for portability  has let me down badly several times in the last 6 weeks.
    I'm really hacked off with this, get your **** together Apple!

  • Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

    is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

    the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
    Sounds like you are a bit confused with version numbers.
    Latest AirPort Utility version for the iPhone / iPad is 1.3.3.  There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
    AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

  • On the Computer using Adobe Digitial Edition there is no possibility to jump forward/back using the

    I am using a brand new iPad Air and a MacBook Pro with Retina and  on the Computer using Adobe Digitial Edition there is no possibility to jump forward/back using the arrows in the menu. It is not possible to jump to a certain page as well. The overall speed is incredible slow to switch between pages.

    Exact same problem here - Win 7, ADE V3.0.  -  pages wont turn unless I click on the symbol at the top RHS of screen for Full/Normal size screen after Page Up/down or a click on the contents page.
    Hopefully a bug or something, and not a 'feature' :-)

  • It seems cranky sometimes works, somtimes not.  My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)?

    I have a new iPhone 4s - having lots of trouble with Siri.  It seems cranky - sometimes works, somtimes not.  My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)?  How can I find fonts availble on my phone?
    Thanks for any help

    Not in Acrobat unless your image is already in the PDF format.
    This is a feature of forms created with LiveCycle Designer.

  • Is there a way to remove the blurred background wallpaper effect when using the phone in iPhone 4S' iOS 7?

    Hello.
    A few nights ago, my picky client finally upgraded his iPhone 4S' iOS 6 to iOS 7. He doesn't like the blurred background wallpaper image when using the phone feature (e.g., calling and talking). Is there a way to disable this new visual effect like in iOS 6?  I am pretty sure this is by design by Apple.
    Thank you in advance.

    sberman wrote:
    I'm not completely sure I understand, but ...
    Might Settings > General > Accessibility > Reduce Motion = "On" do what the customer wants?
    I will tell him about that, but I don't think that would be it if that is related to animation.
    We're talking about the wallpaper background that get blurry during the phone screens like http://www.tekrevue.com/wp-content/uploads/2013/09/20130923_ios7emergencycallfla w.jpg (left side) and http://i.i.cbsi.com/cnwk.1d/i/tim2/2013/09/20/ChangingYourTheme.png ... You can see there are background images that got blurred out.

Maybe you are looking for

  • Transformation in BI 7.0 -  vertical to horizontal mapping

    Hi, We are downloading infocube data to a flat file/excel file through infospoke functionality. As this file used in R/3 for upload using BDC.   But the problem in file format, unable to map month fields in horizontal way (each month should be a colu

  • How to include .jars?

    Hello, I have been unable to find out how to include in the .ear file generated by wsgen the supporting .jar files that my Web Service EJB needs. I thought this could be done with the "classpath" parameter in the wsgen tag in build.xml, but it doesn'

  • Certain websites are garbled but are OK in Google Chrome and Internet Explorer

    Some websites are garbled and hard to read. The same websites are displayed correctly with Google Chrome, Internet Explorer and the Opera Browser Just open the URL below and the problem will be very evident

  • Problem converting captured SQL Server 2000 database to Oracle

    Java(TM) Platform     1.6.0_17 Oracle IDE     2.1.1.64.45 Versioning Support     2.1.1.64.45 After creating MWREP user, granting it privileges and creating the migration repository, I have captured a small SQL Server 2000 database (1 table), but afte

  • How to reverse J2IUN transaction and re utilization of J2IUN?

    Dear friends At my client place user run the J2IUN transaction in current date for the month of April 2009 utilization by mistake. Now it needs to be reverse and re utilize on 30th April 2009 date. I tried in the following way in testing client. I ha