Is there way to configure the Time for attribute Description?

Hi All,
We have a requirement that …
If we provide description (Tooltip) for attribute in Fact or Dimension it is displaying in couple of Seconds. Is there any way that configure to change the Time for attribute Description (Tooltip) Display Time ?
Thanks in advance

I should note that the time stays on the left of the event name when I re-enter the text (which I had to do all the time before I found the "show event times" button) so I feel like there's a way.

Similar Messages

  • Is there a way to keep the time for an event on the left of the box in month view?

    For example, when I type in "5:00 PM Basketball Game," iCal automatically changes the event to "Basketball Game." I only use month view so that wasn't helpful for me. I only recently discovered the "show event times" option in preferences so now the time shows up in month view, but on the right in faded text. Is there anything I can do in Terminal to keep it from automatically changing it? I'm old-fashioned I guess.
    I realize it's nitpicky but I'd appreciate a solution. Thanks!

    I should note that the time stays on the left of the event name when I re-enter the text (which I had to do all the time before I found the "show event times" button) so I feel like there's a way.

  • What is best way of configuring the channels for the PXI box

    Hi,
    All these days I was using a SC-2345 box and a PCMCIA card and I created all my virtual channels as traditional NI-DAQ channels. Now I am using the PXI box, I am wondering whether I still use same traditional NI-DAQ channels or shall I use NI-DAQmx channels. I would like to know what are the advantages of using the NI-DAQmx channels and also using the DAQmx VI's in the labview programming.
    Thanks,
    Mudda.

    Hi Mudda,
    I think it depends on what PXI measurement modules you are using. I'm using PXI4461 for audio measurement and the card supports DAQmx only. I also have PXI5112 digitizer card and it uses the NI-Scope driver. So you need to check which driver your module supports.
    You can find advantage of DAQmx here. http://zone.ni.com/devzone/conceptd.nsf/webmain/B1C2A3BC3228AEA186256D2500640D52?opendocument
    Bill

  • Countdown Timer for Fileserv pauses when viewing other tabs, resumes when returned to tab. Is there any way to make the timer keep going?

    Hi, when I use Fileserv to download files, it has a countdown timer like many file-hosting services. However if I go view other tabs while the timer is going, it gets paused until I come back to the tab and then it resumes.
    For example, I download a file and the timer starts from 30 seconds, at the 25 second mark I view a different tab (lets say to check my email), and after about 40 seconds or so I come back to the Fileserv tab and it's just counting down from 25 seconds.
    This didn't happen before when I was on 3.6.
    Is there anyway to keep the timer going? As 30 seconds is precious enough to check an email or blog while I wait.

    Maybe it keeps working if you tear off that tab and open it in its own window.

  • Is there a way to track the time within the clip (not sequence) that you're in?

    Let me try to explain this as best I can and make sense.
    I watched a video clip and I liked everything from, let's say the :30 mark to the minute mark. So, I import it into Premiere.
    However, when I put it at the end of the next clip, it shows the time for the whole sequence. Now, I know that I can do the math, but is there a way to show where the 30 second mark (in this example) is by avoiding doing the calculation? It's do-able, but seems a little tedious.
    Would like to "reset the clock" so to speak when working on individual clips within the timeline.

    Choose the edit points in the Source Monitor before inserting to the Sequence.
    You can see the duration of the In and Outs in the Monitor .

  • Is there a way to make the Time Capsule compatible with the iBook Clamshell (2000 not 1999)?

    We upgraaded our router to the new time capsule over christmas break and it works great but our old ibook clamshell doesnt work with it. is says an error has occured when i try to connect to it.
    Is there someway to connect the Clamshell?
    Thanks!

    What type of security is defined for your wireless network?  I may be wrong, but I don't believe that the AirPort Card supports anything better than the very weak WEP encryption.  It also only works on the 2.4 GHz band.  I'm presuming you configured the Time Capsule to support that band.

  • Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

    Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

    Yes.
    1) Connect an Ethernet cable from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule
    2) Go through the standard configuration suggested by the setup "wizard"
    3) Then manually turn off the wireless function using AirPort Utility

  • SQL Server Management Studio - Configuring the environment for first time use

    Hi
    I have recently switched my local 'My Documents' folder location to a network drive that I 'make available off line' to allow on-line/off-line work and synchronisation when I am working in and out of the office.
    When I load my SQL Server Management Studio 2005 I frequently get 'Microsoft SQL Server Management Studio is configuring the environment for first time use'.
    Management Studio  them loads and I can continue without problem.
    I am guessing it is trying to make reference to some settings file. Any ideas? I wonder if I can change/move these settings elsewhere to a local drive?
    Thanks

    Hi,
    There is bug report of this issue:
    http://connect.microsoft.com/SQLServer/feedback/details/126364/configuring-enviroment-for-the-first-time-every-time-in-ms-sql-server-management-express
    "SQL Server Management Studio Express saves the settings for the user in ...\Documents and Settings\<User Profile>\Local Settings\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
    and in ...\Documents and Settings\<user profile>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
    if any of these files are not available or unusable, SSMSE will generate new ones."
    Hope this helps.
    BR,
    JoukoK

  • Is there any way to set the default for *.doc document so that Pages opens them automatically?

    I have a number of Ms Word documents because I used to have Word for Mac before the last OS release.  Now, of course, when I double-click on them, I get a message saying that PowerPC isn't supported.
    Now Pages will open these files.  Is there any way to change the default for *.doc files so that a double-click will open them in Pages? 
    (Instead of me going to the trouble of finding out where they are actually located on the hard drive so that I can open pages and say - here, open this file--even though you didn't create it--)

    Click on a .doc file and type Cmnd I to open Get Info. In the Open with: menu select Pages, then click on Change All…
    Walt

  • I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago.  The person that did the order is no longer here.  All I have is the CD Disk that is new but i did not know the key code is.  Is there a way to get the keycode for this?

    I work for the County and we purchased a copy of Adobe Photoshop CS2 long ago.  The person that did the order is no longer here.  All I have is the CD Disk that is new but i did not know the key code is.  Is there a way to get the keycode for this?

    It would not work anyway. The activation servers have been retired and Adobe has provided a new CS2 download along with a new serial number for CS2 owners.
    Download Acrobat 7 and CS2 products
    Gene

  • HT201250 I am having trouble setting up my time capsule.  the amber light is flashing.  i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function.  I just want the Time Capsule to ba

    I am having trouble setting up my time capsule.  the amber light is flashing.  i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function.  I just want the Time Capsule to back up.

    Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
    Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

  • I have  license for Adobe Design Std CS6 6.0 MLP .Is there any way to get the installer for this?

    I have  license for Adobe Design Std CS6 6.0 MLP .Is there any way to get the installer for this?

    Download CS6 products
    Mylenium

  • Is there a way to change the default page attributes (font, margins, etc) in Pages or do I have to change them every time I open a new document?

    Is there a way to change the default page attributes (font, margins, etc) in Pages or do I have to change them every time I open a new document?

    I never even thought of that - Word woman that I was!  Thanks so much - I shall give it a go!!

  • Is there any way to enlarge the font for the panels in Bridge?

    Is there any way to enlarge the font for the panels in Bridge? Either CC or CS6?

    To change the default message font, use UIManager:   UIManager.put("OptionPane.messageFont",
          new Font("Lucida Console", Font.PLAIN, 12)); Per-instance, use HTML:   JOptionPane.showMessageDialog(
          "<html><font face='Lucida Console'>Your message here</font></html>");

  • Is there any way to change the settings for the built in isight camera?

    I'm sure someone else has probably already asked this, but is there any way to change the settings for the built in isight camera? The resolution is horrible.

    Welcome to  Discussions, Prissymissysays
    The last Apple-published resolution data I saw said that iSight's resolution is 640x480 VGA. I do not know of any way to change iSight's resolution, but that level is plenty of quality for my webcam needs.
    The software you use to operate your iSight controls it, so specific answers will depend on what software you are using when you need more resolution. Check Help in that application to see if it can change iSight's resolution.
    Some software, such as Apple's QuickTime 7 Pro allow you to change iSight's video quality and compression level with its QuickTime Player > Preferences > Recording > Quality: setting. You can add iGlasses software to manually override some iSight settings that are otherwise controlled automatically by the software using iSight. However, I do not think either of these options really changes iSight's resolution.
    Check whether your iSight's lens cover has fingerprints or smudges on it. Then check iSight's image quality of your face in full sunlight about two feet from the lens. Best image quality requires more light than what most people would consider normal room lighting.
    If you are still having problems, consider the applicable suggestions from How to Troubleshoot iSight.
    If you need better resolution than iSight can deliver for some special imaging requirement such as close-up or high-accuracy images, you may need to consider using a different camera that better meets your special needs.
    EZ Jim
    PowerBook 1.67 GHz   Mac OS X (10.4.10)    G5 DP 1.8  External iSight

Maybe you are looking for