Is there way to Monitor Live camera from SCOM 2012 R2

Is there way to Monitor Live camera from SCOM 2012 R2 ?
Thanks
Raja R
Raja R

Depends what it is that you want to monitor?
If it's an IP camera that supports SNMP, you can monitor multiple components, depending on the manufacturer (e.g. # images captures, uptime in hours, ...).
If it doesn't support SNMP, you can monitor it through ICMP (ping). Then it's only possible to monitor the state of the device (up/down) depending on wether scom receives a ping reply or not.
If it's a coaxial camera or something else, not connected to a network, it's not possible to monitor the camera itself. Might be possible to monitor the computer/DVR that records the images.

Similar Messages

Way to use Live video (from camcorder) as a background?

Hello.
I was wondering if there's any way to use live video (from camcorder) as a background using Keynote.
I am trying to add caption/subtitle on live video to projector.

I haven't tried this myself recently (the last time I tried it, the delay was frozen to no less than 3 seconds), but a user in this thread said he got the delay down to .1 seconds by using QuickTime Broadcaster and altering the .sdp file.
This technique uses Broadcaster to make your computer stream to itself and use the stream file in Keynote.
http://discussions.apple.com/message.jspa?messageID=7228452#7228452

Problem upgrading from SCOM 2012 SP1 to R2 (near impossible to uninstall SCOM agent from Management Server)

I'm trying to upgrade our SCOM 2012 SP1 environment to R2, but I have a heck of a problem getting there.
We currently have an test installation with SCOM 2012 SP1 with Management Server and Console on a single 2012 Standard server. The database are located on a remote server. The R2 setup stopped mid way through the setup, because the SCOM 2012 SP1 agent is
installed. And I could NOT remove it my any normal means. I've tried "misexec.exe /x productcode", the setup, powershell uninstall and so on. Nothing works, because the management server installation is blocking the uninstall. The uninstall says
I have to remove the management installation first. And that's not gonna happen.
I had to follow this guide to finally getting through the setup: http://www.opsman.co.za/forcibly-removing-a-scom-agent-that-cannot-be-uninstalled-by-normal-means/
In addition to searching for the agent msi install key in registry, and deleting everything. After I did this, the setup is working, and the SCOM management server, console and DB are up to date. However, the Microsoft Monitoring Agent are STILL there in
Control Panel. And this can NOT be the most healthy way of getting through the setup.
I'm about to upgrade to R2 in our production environment with 3 management servers, and I would hate to go through this sketchy process there as well. Just for the record, I have no idea why the agents are installed on our management servers.
Any of you have tips as to how I can get rid of the agents more gracefully?

Hi
Thanks for the replay guys!
None of those links touch my problem I'm afraid. I have followed the Upgrade guides you pointed to, step by step. But the setup does not Complete. There's problems during the actual software Upgrade of the management servers (3'rd step in the Upgrade page).
I've dived into the Application logs and installation logs, and as far as I can tell, it stops because it has trouble upgrading while the server has the 2012 SP1 Agent installed. I do not remember the actual error text right now, but I can get it in a few
days.
Anyhow, the setup DID move on once I removed most of the registry information of the agent installation. So. that leaves me to the conclusion that the agent IS in fact stopping the setup. Either the agent are malfunctioning, or the setup do not expect the
agent to be present on the management servers. I suspect the latter to be the the most plausible. At least until Yan Li told me this was normal.
So, I'm not sure what to think. I'm pretty much forced to remove this agents, as this is the only thing allowing me to continue the setup. At least untill I'm told otherwise. But I hate to do it this way. It's so dirty. The registry is pretty much cleaned,
but there's still Application files present, and the agent is still in the Control panel and can be started. It's not something I would like to do in our prodution environment.

Exchange 2013 CU2, Alert for OWA Health set unhealthy from SCOM 2012

I am facing issue in Exchange 2013 CU2, I got this alert from SCOM 2012 atleast 5-6 times a day, OWA health set is unhealthy, I have done all the steps mentioned in this web link. Authentication type for OWA Virtual directory is integrated windows and Basic.
I have 2 CAS servers, and this alert generated from both of them.
http://technet.microsoft.com/en-us/library/ms.exch.scom.OWA(EXCHG.150).aspx?v=15.0.712.24
Alert: Health Set unhealthy
Source: EX-CAS - OWA
Path: EX-CAS;EX-CAS
Last modified by: System
Last modified time: 1/5/2014 8:15:08 PM
Alert description: Outlook Web Access logon is failing on ClientAccess server EX-CAS.
Availability has dropped to 0%. You can find protocol level traces for the failures on C:\Program Files\Microsoft\Exchange Server\V15\Logging\Monitoring\OWA\ClientAccessProbe.
Incident start time: 1/6/2014 4:05:08 AM
Last failed result:
Failing Component - Owa
Failure Reason - CafeFailure
Exception:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Exchange.Net.MonitoringWebClient.ScenarioException:
Microsoft.Exchange.Net.MonitoringWebClient.ScenarioException:
Failure source: Owa
Failure reason: CafeFailure
Failing component:Owa
Exception hint: CafeErrorPage: CafeFailure Unauthorized Inner exception: Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException
ErrorPageFailureReason: CafeFailure, RequestFailureContext: FailurePoint=FrontEnd, HttpStatusCode=401, Error=Unauthorized, Details=, HttpProxySubErrorCode=, WebExceptionStatus=
Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: An error occurred on the Client Access server while processing the request
WebExceptionStatus: Success
GET https://localhost/owa/ HTTP/1.1
User-Agent: Mozilla/4.0 (compatible; MSIE 9.0; Windows NT 6.1; MSEXCHMON; ACTIVEMONITORING; OWACTP)
Accept: */*
Cache-Control: no-cache
X-OWA-ActionName: Monitoring
Cookie:
HTTP/1.1 401 Unauthorized
request-id: 211474d2-a43e-4fab-8038-3aab35353568
X-FailureContext: FrontEnd;401;VW5hdXRob3JpemVk;;;
Server: Microsoft-IIS/7.5
WWW-Authenticate: Negotiate,NTLM,Basic realm="localhost"
X-Powered-By: ASP.NET
X-FEServer: EX-CAS
Date: Mon, 06 Jan 2014 04:14:47 GMT
Content-Length: 0
Response time: 0s
---> Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException
ErrorPageFailureReason: CafeFailure, RequestFailureContext: FailurePoint=FrontEnd, HttpStatusCode=401, Error=Unauthorized, Details=, HttpProxySubErrorCode=, WebExceptionStatus=
Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: An error occurred on the Client Access server while processing the request
WebExceptionStatus: Success
GET https://localhost/owa/ HTTP/1.1
User-Agent: Mozilla/4.0 (compatible; MSIE 9.0; Windows NT 6.1; MSEXCHMON; ACTIVEMONITORING; OWACTP)
Accept: */*
Cache-Control: no-cache
X-OWA-ActionName: Monitoring
Cookie:
HTTP/1.1 401 Unauthorized
request-id: 211474d2-a43e-4fab-8038-3aab35353568
X-FailureContext: FrontEnd;401;VW5hdXRob3JpemVk;;;
Server: Microsoft-IIS/7.5
WWW-Authenticate: Negotiate,NTLM,Basic realm="localhost"
X-Powered-By: ASP.NET
X-FEServer: EX-CAS
Date: Mon, 06 Jan 2014 04:14:47 GMT
Content-Length: 0
Response time: 0s
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Net.MonitoringWebClient.BaseExceptionAnalyzer.Analyze(TestId currentTestStep, HttpWebRequestWrapper request, HttpWebResponseWrapper response, Exception exception, Action`1 trackingDelegate)
   at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.AnalyzeResponse[T](HttpWebRequestWrapper request, HttpWebResponseWrapper response, Exception exception, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse)
   at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.EndSend[T](IAsyncResult result, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse, Boolean fireResponseReceivedEvent)
   at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.EndGet[T](IAsyncResult result, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse)
   at Microsoft.Exchange.Net.MonitoringWebClient.Authenticate.AuthenticationResponseReceived(IAsyncResult result)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Net.MonitoringWebClient.BaseTestStep.EndExecute(IAsyncResult result)
   at Microsoft.Exchange.Net.MonitoringWebClient.Owa.OwaLogin.AuthenticationCompleted(IAsyncResult result)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Net.MonitoringWebClient.BaseTestStep.EndExecute(IAsyncResult result)
   at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Bool
States of all monitors within the health set:
Note: Data may be stale. To get current data, run: Get-ServerHealth -Identity 'EX-CAS' -HealthSet 'OWA'
State
Name
TargetResource                     HealthSet
AlertValue     ServerComponent
NotApplicable       OwaCtpMonitor
OWA
Unhealthy      None
States of all health sets:
Note: Data may be stale. To get current data, run: Get-HealthReport -Identity 'EX-CAS'
State
HealthSet
AlertValue     LastTransitionTime
MonitorCount
NotApplicable       ActiveSync
Healthy        1/3/2014 5:21:13 AM
2
NotApplicable       AD
Healthy        11/24/2013 6:54:18 AM
10
NotApplicable       ECP
Healthy        1/5/2014 3:03:05 AM
1
Online
Autodiscover.Proxy
Healthy        11/20/2013 10:06:37 AM
1
NotApplicable       Autodiscover
Healthy        1/3/2014 10:18:17 PM
2
Online
ActiveSync.Proxy
Healthy        11/20/2013 10:06:37 AM
1
Online
ECP.Proxy
    Healthy
11/21/2013 6:16:08 PM    4
Online
EWS.Proxy
Healthy        11/20/2013 10:06:37 AM
1
Online
OutlookMapi.Proxy
Healthy        11/24/2013 6:54:28 AM
4
Online
OAB.Proxy
Healthy        11/19/2013 7:14:34 PM
1
Online
OWA.Proxy
Healthy        11/20/2013 10:06:37 AM
2
NotApplicable       EDS
Healthy        1/3/2014 5:19:56 AM
10
Online
RPS.Proxy
Healthy        1/3/2014 5:21:27 AM
13
Online
RWS.Proxy                     Healthy
1/3/2014 5:20:09 AM      10
Online
Outlook.Proxy
Healthy        1/3/2014 5:21:12 AM
4
NotApplicable       EWS
Healthy        1/3/2014 10:18:17 PM
2
Online
FrontendTransport
Healthy        1/5/2014 3:47:09 AM
11
Online
HubTransport
Healthy        1/5/2014 3:47:09 AM
29
NotApplicable       Monitoring
Unhealthy      1/5/2014 4:05:57 AM
9
NotApplicable       DataProtection
Healthy        1/3/2014 5:25:42 AM
1
NotApplicable       Network                       Healthy
1/4/2014 1:51:16 PM      1
NotApplicable       OWA
Unhealthy      1/5/2014 8:05:08 PM
1
NotApplicable       FIPS
Healthy        1/3/2014 5:21:12 AM
3
Online
Transport
Healthy        1/5/2014 4:11:00 AM
9
NotApplicable       RPS
Healthy        11/20/2013 10:07:12 AM
2
NotApplicable       Compliance
Healthy        11/20/2013 10:08:10 AM
2
NotApplicable       Outlook
Healthy        11/21/2013 6:12:54 PM
2
Online
UM.CallRouter
Healthy        1/5/2014 3:47:10 AM
7
NotApplicable       UserThrottling
Healthy        1/5/2014 4:16:42 AM
7
NotApplicable       Search
                Healthy
11/24/2013 6:55:06 AM    9
NotApplicable       AntiSpam
Healthy        1/3/2014 5:16:43 AM
3
NotApplicable       Security
Healthy        1/3/2014 5:19:28 AM
3
NotApplicable       IMAP.Protocol
Healthy        1/3/2014 5:21:14 AM
3
NotApplicable       Datamining
Healthy        1/3/2014 5:18:34 AM
3
NotApplicable       Provisioning
Healthy        1/3/2014 5:19:56 AM
3
NotApplicable       POP.Protocol
Healthy        1/3/2014 5:20:44 AM
3
NotApplicable       Outlook.Protocol
Healthy        1/3/2014 5:19:46 AM
3
NotApplicable       ProcessIsolation
Healthy        1/3/2014 5:19:26 AM
9
NotApplicable       Store
Healthy       1/3/2014 5:20:38 AM
6
NotApplicable       TransportSync
Healthy        11/24/2013 6:53:09 AM
3
NotApplicable       MailboxTransport
Healthy        1/3/2014 5:21:11 AM
6
NotApplicable       EventAssistants
Healthy        11/21/2013 6:22:01 PM
2
NotApplicable       MRS
Healthy        1/3/2014 5:20:29 AM
3
NotApplicable       MessageTracing
Healthy        1/3/2014 5:18:15 AM
3
NotApplicable       CentralAdmin
Healthy        1/3/2014 5:17:25 AM
3
NotApplicable       UM.Protocol
Healthy        1/3/2014 5:17:08 AM
3
NotApplicable       Autodiscover.Protocol
Healthy        1/3/2014 5:17:13 AM
3
NotApplicable       OAB
Healthy        1/3/2014 5:20:51 AM
3
NotApplicable       OWA.Protocol
Healthy        1/3/2014 5:20:52 AM
3
NotApplicable       Calendaring
Healthy        11/24/2013 6:56:59 AM
3
NotApplicable       PushNotifications.Protocol
Healthy        11/21/2013 6:16:05 PM
3
NotApplicable       EWS.Protocol
Healthy        1/3/2014 5:19:07 AM
3
NotApplicable       ActiveSync.Protocol
         Healthy
1/3/2014 5:20:16 AM      3
NotApplicable       RemoteMonitoring
Healthy        1/5/2014 3:47:09 AM
3
Any solution for this alert, how to rectify it, but OWA is running perfect for all users.

Hi,
Sorry for the late reply.
Do we have Exchange 2010 coexistence?
If it is the case, I know the following known issue:
Release Notes for Exchange 2013
http://technet.microsoft.com/en-us/library/jj150489%28v=exchg.150%29.aspx
Please note the "Exchange 2010 coexistence" session.
If it is not related to our problem, please check the IIS log.
If there is any detailed error code, like 401.1, 401.2, please let me know.
Hope it is helpful
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Windows client monitoring Management packs for SCOM 2012

Hello All,
Please provide the link for windows client monitor management pack for SCOM 2012 SP1 ,if there is any available .
I have got one link for this but it is for SCOM 2007 .
Regards
Richa KM

http://www.microsoft.com/en-us/download/details.aspx?id=15700
Yes you can download from this link and you can import it in scom 2012 sp1.although it is for scom 2007

Manage DPM servers, running DPM jobs, etc from SCOM 2012 SP1

Hi,
Little background about our systems.
We have a dedicated SCOM 2012.
We have 22 DPM servers, DPM 2010 and DPM 2012 (we are upgrading to 2012 SP1, we have customers that still using Windows 2003 servers) to be managed by SCOM
We have a few DPM servers that are not located on the same domain as the SCOM server (untrusted domain).
Some problem we have
1. When we try to manage the DPM servers from the SCOM server.
From SCOM 2012 server I can “Manage DPM server” that are located in our domain but I cannot manage DPM servers located on untrusted domains (customer’s domains). I receive the below error message
"Unable to connect to <untrusted domain DPM SERVER> ID: 948
Verify that the DPM service is running on this computer"
I guess it’s because the account that I’m using to run SCOM server located in our domain and does not have the permission to open the DPM console on the untrusted domain. So I wonder if it is possible to use “RUN AS profiles/accounts”
to solve this issue, and how?
2. I have installed SCOM 2012 Operations Manager Console on my computer and then installed DPM Central Console.
When I select one dpm server (from my computer), that is on our domain, and then click “Manage DPM server” I got this error message
"Unable to connect to <our domain DPM SERVER> ID: 33333
1. Verify that the DPM service is running on this computer (YES)
2. Verify that the current user has been added to at least one of the roles in Operations Manager. (YES)
3. Open Operations Manage console and then try launching the DPM Console (THAT IS WHAT I AM TRYING TO DO)
4. If you have re-imported the management pack recently, the role configuration may be corrupt. Open the DPM-specific roles and check if the roles have task assigned to them. If not, delete the roles and recreate the...."
When I click on “Get more information” I get this error message.
"You don´t have access permission to connect to the System Center Data Access service on <SCOM SERVER>. Please check if it is a permission issue".....
Do you know why I cannot connect to any DPM server on our own domain?
Why do I get access permission error on my computer but not on the SCOM server (using the same account)?
What should we do to be able to connect to DPM servers that are on untrusted domain?
3. Is it possible to see Last Recovery Point date/time in SCOM alerts?
For me it is the first thing I look at. If it has failed 10 min ago it is not critical.
But if it is a date and time more than 1 day old, then it is critical.
I hope someone can help us with this
Br
SvBoho

Hi,
To manager DPM, I think we may need to add the account to local admin group of the DPM server.
In addition, to connect to DPM the user needs permissions to DPM/SQL Server DPMDB.
For your DCs, have your enabled agent proxy option? If not, please enable that option for all DCs.
To monitor DPM with SCOM, please also go through the below links:
http://kevingreeneitblog.blogspot.com/2011/10/managing-and-monitoring-system-center.html
http://damatisystemcenter.com/2013/10/14/monitor-data-protection-manager-2012-using-scom-2012-sp1/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li

Most straight forward approach for monitoring scheduled tasks in SCOM 2012

Hi,
This one should be easy (?): looking for the most straight forward approach for monitoring scheduled tasks in SCOM 2012.
Best regards
Thanks in advance, Best Regards

<Reference Alias="SC">
<ID>Microsoft.SystemCenter.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Windows">
<ID>Microsoft.Windows.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="MicrosoftWindowsServerLibrary6063215">
<ID>Microsoft.Windows.Server.Library</ID>
<Version>6.0.7061.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Health">
<ID>System.Health.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
You also need to add/copy the reference for the Scheduled Tasks MP you are using for other OSs. The above is from the MP for Windows 2012 Scheduled Tasks. Most of the existing MPs available for scheduled tasks already cover Windows 2003/2008 R2, I just extended
support for 2012.

Upgrade from SCOM 2012 R2 directly to UR4

Is it possible to Upgrade from SCOM 2012 R2 RTM to Update rollup 4 ?
I alreday upgraded but I could not find new dashboard and widgets ?

It's a cumulative upgrade so you don't need to install all of the release sequential. Latest is enough.
Did you also import the management packs as mentioned in the guide?
https://support.microsoft.com/kb/2992020/en-us
Import the following management packs:
Microsoft.SystemCenter.TFSWISynchronization.mpb, which has the following dependency:
Microsoft.SystemCenter.AlertAttachment.mpb, which should be installed from the System Center Operations Manager 2012 R2 media.
Microsoft.SystemCenter.Visualization.Library.mpb
Microsoft.SystemCenter.Visualization.Component.Library.mpb
Microsoft.SystemCenter.Advisor.mpb
Microsoft.SystemCenter.Advisor.Internal.mpb
Microsoft.SystemCenter.2007.mp
Also don't forget to update the console!

Upgrading from SCOM 2012 SP1 to SCOM 2012 R2 what CU do i install? CU5?

Hi,
I just upgraded from SCOM 2012 SP1 to SCOM 2012 R2. What CU version should I install? CU5?
Thanks
K

The most current CU version os SCOM 2012R2 is CU4
You can download it from
https://support.microsoft.com/kb/2906925?wa=wsignin1.0
For detail description of SCOM 2012 R2 CU4, you may refer to
http://support.microsoft.com/kb/2992020
and
http://syscentercldman.blogspot.hk/2014/12/update-of-scom-2012-r2-ur4.html
Roger

Is there a way I can stream video from my 2012 AirMac to the Apple TV using airplay and at the same time stream the audio to an air speaker?

Is there a way stream video from a 2012 MacBook Air to a TV using Apple TV and at the same time steam the audio to an air speaker. Also the same question but using an ipad

You can try one thing. Follow these steps:
1. On your Mac, turn on AirPlay Mirroring and connect it to the Apple TV, so audio and video will stream from the Apple TV.
2. Turn off the sound of the TV where you have connected the Apple TV.
3. Then, make sure that you have turned on the AirPlay speakers. Then, open System Preferences > Sound > Output, and choose the external speakers, so sound will stream from these external speakers.
This should work correctly

Upgrade to R2 from SCOM 2012 SP 1 UR 4 - Final configuration failed to install

I was upgrading our test SCOM 2012 SP1 UR 4 sever to R2 and ran into the following issue:
Setup cannot be completed… Final configuration failed to install.
Everything else upgraded fine.
There was no rollback performed…. The log states “Skipping rollback for install item Final Configuration as it was not successfully installed”
Looking in OpsManagerSetupWizard.log in the section for Final Configuration I see the following:
[16:00:43]:           Always: :!***** Installing: POSTINSTALL ***
[16:00:43]:           Info:      :SetProgressScreen: StartMinorStep.
[16:00:43]:           Warn:    :ApplyUpdates: Unable to load QFE file.
[16:00:43]:           Always: :Doing Preinstall task for POSTINSTALL
[16:00:43]:           Warn:    :CheckAndLoadUpdateFiles: Unable to load QFE file.
[16:00:43]:           Always: :Doing Install task for POSTINSTALL
[16:00:44]:           Debug: :DoInstallTask: Found Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall;PostInstallProcessor as type and method.
[16:00:44]:           Info:      :Type: Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall Method: PostInstallProcessor
[16:00:44]:           Info:      :SetProgressScreen: Init Exe Install progress.
[16:00:44]:           Info:      :AddUninstallChangeEntry: Cleaning out existing files at the ARP file cache location D:\Program Files\System Center 2012\Operations
Manager\Setup
[16:00:44]:           Error:     :InstallActionProcessor.DoInstallTask: method PostInstallProcessor threw exception. We will return installSuccessful = false.:
Threw Exception.Type: System.Reflection.TargetInvocationException, Exception Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
[16:00:44]:           Error:     :StackTrace:   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallActionProcessor.DoInstallTask(InstallItemsInstallDataItem itemToInstall)
[16:00:44]:           Error:     :Inner Exception.Type: System.UnauthorizedAccessException, Exception Error Code: 0x80131604, Exception.Message: Access to the path 'EULA_EN_EVAL.RTF'
is denied.
[16:00:44]:           Error:     :InnerException.StackTrace:   at System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive, Boolean
throwOnTopLevelDirectoryNotFound)
   at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ARPFileCache()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.AddUninstallChangeEntry()
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall.PostInstallProcessor(Func`3 setProgressScreen)
[16:00:44]:           Error:     :ProcessInstalls: Install Item Final Configuration failed to install. We did not launch the post process delegate.
[16:00:44]:           Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Final Configuration
[16:00:44]:           Info:      :SetProgressScreen: FinishMinorStep.
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :****Starting*RollBack*******************************************
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Info:      :SetProgressScreen: StartMinorStep.
[16:00:44]:           Always: :ProcessRollback: Skipping rollback for install item Final Configuration as it was not successfully installed.
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :****Ended*RollBack**********************************************
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :Entering Page: FinishPage
The log states “Access to the path 'EULA_EN_EVAL.RTF' is denied.” I was able to find this file in D:\Program Files\System Center 2012\Operations Manager\SetupTemp\EN, but when viewing its contents I see it
was from the SP 1 upgrade as it starts off with “MICROSOFT EVALUATION SOFTWARE LICENSE TERMS MICROSOFT SYSTEM CENTER 2012 STANDARD SERVICE PACK 1.” Based on everything else referenced in the log file previously, it seems like it was trying to locate
this file in D:\Program Files\System Center 2012\Operations Manager\Setup. Also, I applied the product key after installing SP1 previously, so it was not running with an evaluation license.
Running Get-SCOMManagementGroup | ft skuforlicense, version, timeofexpiration –a
gives me:
SkuForLicense Version     TimeOfExpiration
       Retail 7.1.10226.0 12/31/9999 11:59:59 PM
The version (7.1.10226.0) is that of SCOM 2012 R2 (as I noted before, there was no rollback.) Everything seems to be functioning fine (Console, Web Console, Reporting Services.)
Is there a way to get it to re-run only the Final Configuration steps (which will probably fail again as the EULA file does not exist where it expects it)? I am not sure if there were supposed to be any further
configuration steps that did not get completed, so i dont know how stable SCOM is now. Should I re-run the R2 installer? Or is it OK as is? The only info online about a SCOM Install where the final configuration failed to install dealt with
an error upgrading the SCOM Console, which is not relevant to my situation. This is my test SCOM environment, running on a VM. I could revert to the pre-upgrade snapshot and see if another upgrade attempt completes successfully, but if that does
work I am concerned that something like this may happen in my prod environment, which is not running on a VM, so has no ability to revert to a snapshot.

Hi,
Please refer to the following links:
Do I need a specific Cumulative Update Release (UR) in order to upgrade to SCOM 2012 or 2012 SP1 or 2012 R2?
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Upgrading Operations Manager from 2012 SP1 to 2012 R2 step by step
http://www.systemcentercentral.com/upgrading-operations-manager-from-2012-sp1-to-2012-r2-step-by-step-upgrading-to-2012-r2-series/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+systemcenterforum+%28System+Center+Central+Rollup%29
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Issues with Monitoring Azure services with SCOM 2012 R2

Hi,
I'm trying to setup monitoring of our Azure subscriptions in a new installation of Operations Manager 2012 R2 which is running in-house as it is also monitoring our internal services. I've used the guide below:
http://blogs.msdn.com/b/walterm/archive/2013/04/13/first-impressions-on-system-center-management-pack-for-windows-azure-fabric-preview-for-scom-2012-sp1.aspx
This has all worked OK and I've been able to add the subscription into OP Manager and it's found the cloud service, storage and VM's. However when I try to add the monitoring and I go to create this When I select the Add option in the Add Monitoring
Wizard and click the Search button to list the components (Cloud Service, Storage and VM's) nothing is found despite me having already selected the subscription.
Has anyone else experienced this or can offer any advice?
Many Thanks
Colin

Hi,
Which version of RDP client you are using for your client?
Does more user login at same period of time?
As you have commented that after sticking the user can’t able to login in RDCB server, here I can suggest you to check the setting of connection broker. Also you can check that you have place the proper location path of UPD while configuring in collection configuration
wizard. You can take a look at below article foe virtual desktop configuration.
Deploying Virtual Desktops with Windows Server 2012
Are you trying to use same UPD for different collection then also it might happens to occur your issue. The fact of UPD is User profile disks are for a single collection only. A user connecting to two different collections will have two separate profiles. If
you want to synchronize settings, refer to Microsoft User Experience Virtualization. Go through this article for more understanding related to UPD.
Working with User Profile Disks on Session-Based Desktop Deployments
Hope it helps!
Thanks.

Need to monitor application folders in scom 2012

Hi;
I need to monitor the the size of msmq folder on various windows servers.
Here the requirement is to monitor the size of respective folders. Most of the files are located at
C:\Windows\System32\msmq--
Could someone will help me for configuring these foldes under scom 2012 management servers.
Thanks..
Regards, Rajeev Parambil

Hi,
We may use script to check file sizes and use the script to create a monitor.
In addition, hope the below article can be helpful:
Monitoring File Size with Custom WMI Performance Counter
http://blogs.msdn.com/b/steverac/archive/2009/08/30/monitoring-file-size-with-custom-wmi-performance-counter.aspx
Regards,
Yan Li
Regards, Yan Li

How do "you" monitor event logs in SCOM 2012? Need opinions.

Fairly new to SCOM. Do you monitor all event logs? Just warnings and critical? How do you filter out things you don't want to see?
Looking for opinions here not just a "how-to".
Thanks,

Steps in creating a Event based Alerting Rule.
1. Open the Operations Manager Console.
2. Go to Authoring.
3. Under Authoring - Management Pack Objects - Select Rules
4. Right click on Rules and select - Create a new rule
5. Select Alert Generating Rules - Event Based - NT Event Log (Alert)
6. On the same screen select your destination management pack and click Next
7. Give a name to your Rule and optionally give it a Description.
8. Rule Category can be anything you like.
9. Select the Rule Target as the class of your choice, normally it can be Windows Computer.
10. Make sure the Rule is Enabled and select Next.
11. Select the Event log name from where event will be monitored and click Next. (for example Application or System
or Security)
12. Build the Expression to filter the events with the below details:
     a. Parameter Name = Event ID, Operator = Equals and Value = (any event id of your choice)
     b. Parameter Name = Event Source, Operator = Equals and Value = (any source of your choice) (you
may delete this filter if you want)
     c. Click on Insert button at Top and it will put the cursor at Parameter Name, click square button
with 3 dots [...] and it will popup another screen.
     d. In that box, select the 3rd radio button named 'Use parameter name not specified above' and there
manually type 'EventDescription' (without quotes) and click OK.
     e. Then come back to filter screen, now here you will see Parameter Name = EventDescription, and
for Operator select Contains and then for Value you can type any word you want to key on from the Event description.
13. After building the desired Expression, click Next.
14. Configure Alerts as you like and click the Create button.
To get the Alerting event details. Go to Start menu and in Run window type eventvwr.
And put the details on the wizard as per the below screenshot.
Refer: http://blogs.technet.com/b/operationsmgr/archive/2008/11/12/opsmgr-2007-how-to-create-an-alert-rule-based-on-an-event-description.aspx
Gautam.75801

Getting Error code -2130771961 while Discovering Cross platform server from SCOM 2012 r2.

Below is the Error
Unexpected DiscoveryResult.ErrorData type. Please file bug report.
ErrorData: Microsoft.SystemCenter.CrossPlatform.ClientLibrary.Common.SDKAbstraction.TaskInvocationException
Task invocation failed with error code -2130771961. Error message was: Creation of module with CLSID "{ED8C18C7-FEF4-488D-AAAF-830366BF0B40}" failed with error "Illegal operation attempted on a registry key that has been marked for deletion."
in rule "Microsoft.Unix.HostEntryResolution.Task" running for instance "Linux Resource Pool" with id:"{7337E4AE-136A-1099-B024-2F4633B1AE1A}" in management group "pslmgmt".
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.SystemCenter.CrossPlatform.ClientActions.DefaultDiscovery.InvokeWorkflow(IManagedObject managementActionPoint, DiscoveryTargetEndpoint criteria, IInstallableAgents installableAgents)
can some one please help me ?

Hi Pandit,
Have you tried restarting the SCOM service on the management server that you are performing the discovery on? Refer below articles for more information.
http://social.technet.microsoft.com/wiki/contents/articles/4966.troubleshooting-unixlinux-agent-discovery-in-system-center-2012-operations-manager.aspx
http://www.systemcentercentral.com/forums-archive/topic/scom-2012-r2-discovery-was-not-succesful-for-solaris/
Thanks,
Janaka
Janaka Rangama MCT MIEEE MBCS (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable.)

Is there way to Monitor Live camera from SCOM 2012 R2

Similar Messages

Maybe you are looking for