Is this a bug no one has caught
Has anyone done an install with the 7.9.6.3 apps new or have most been upgrades? I have dealt with a lot of upgrades and rarely any new installs but the issue being seen is happening in 11.1.1.5 and 11.1.1.6 using the 7.9.6.3 apps. When installing the apps, 1 Web Catalog called "EnterpriseBusinessAnalytics" is created with pretty much every subject area. 2 RPD's get created "EnterpriseBusinessAnalytics.rpd (all the apps) and OracleBIAnalyticsApps.rpd (only the apps selected). Now I would assume that every user, whether native or external has at least authenticated-user which would allow them access to login, just not really see anything. If you use the OracleBIAnalyticsApps.rpd, then no one can login;native or external unless they have been assigned the BIAdministrator role. Even the BIConsumer or BIAuthor roles fail. If you use the EnterpriseBusinessAnalytics.rpd then any user is able to login without being provisioned to a role...so the question is, am I looking at this wrong or is this a major bug that has not been caught. I would assume if the RPD with everything works, there should be no reason the RPD with just the apps I am using should not. A easy test, if you have the BI Apps installed, use the OracleBIAnalyticsApps.rpd. Create a native user and assign them nothing. Try and login and it will fail. Now go back and add them to the BIConsumer group. Try and login and again failure. Now if you add the to the BIAdministrator role that will allow them in. If you go back and change the RPD to EnterpriseBusinessAnalytics.rpd and remove user ID from any group and login, no issue.
Edited by: J.A.M on Mar 24, 2012 8:47 AM
Hi
Thanks for bringing this issue. Yes it seems to me a bug. I had two identical but separate installations, but i am having same issue. when i assign BIAdministrator it works but when i assign BIConsumer or BIAuthor Role it would n;t work. I was doing my RND on it but didnt got any result to solve this issue.
I am also having feeling this is a bug.
Regards
sher
Similar Messages
-
Is This A BUG or One Of Logics New Features
of course i'm ready to mix and on the mixer, none of the faders or pans work. they won't move. then it crashes. the only way i can change levels is from the arrange page. has anyone else experienced this? i can tell you this, every new project has at least 20 crash projects. in the past this hardly ever happened. this is by far the buggiest program i have ever worked on. too bad cause i like the new features.
By chance are you working on an L7 song that you opened in L8?
-
I have charges on my account I did not approve. I have sent requested for return phone calls to discuss this problem nd no one has called. If his problem is not corrected. I am reporting it as fraud.
We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple. You will need to contact iTunes Support again : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
I have configured a new one iphone 4s I have done it via wifi i has caught myself for defect the you ID (mail) of a person that toward a lot of time habia lived in my house. Someone can tell me the because??
PinguXeF wrote:
, while I have taken a backup of the iTunes Library,
this means nothing if it was not done correctly...
To have EVERYTHING on a New Computer...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751 -
my mail app on I phone 4s crashes every time when i try to open, and i can see it thru the setting>general. also phone is overheating and spending battery fast. does any one has some answer on this or same issue? what to do did any has same issue? if i do an complete phone restore what will hapend ?
You can call Verizon to replace it or go to an applestore to replace it since it won't even power on with multiple chargers.
-
I have three computers backing up onto the same Time Machine. The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers. How can I do this?
"You can also browse the original backup disk for past backups by using "Browse other Time Machine Disks"--to see this choice, hold the Option key then click the Time Machine menu in the Finder (to see the menu, "Show Time Machine status in the menu bar" must be selected in Time Machine preferences."
Mac 101: Time Machine -
Is anyone facing the similar problem of visible lag while opening app with 3G data on? It seems apple has made 5s slow to improve iphone 4 performance.5s was very smooth on 7.0.6 even with 3G data on. Is this a bug? Is apple going to fix this soon?
I have same Problem. I tried all options - Reset All Settings, Erase Content & reset all settings, Upgrated to IOS8.1, Restore using iTune. But problem persists.
When I turn Cellular Data or Wifi ON, then there is a lag while opening the Apps. But If I turn Data/Wifi off, phone becomes super fast. I have checked with my friends. They are not facing this issue. Not sure if Apple know this. -
Is this a bug?: copied movie clip has wrong frame rate and ruins the main movie's sync
Hello,
I am trying to copy a movieclip with a frame rate of 30 frames per second to a movie that has a frame rate of 30 frames per second. Both movies are actionscript 3 movies. When I do this, my copied movie clip's frame rate reverts to 12 frames per second and all my audio synched animation is trashed. Then when I change it back manually to 30 frames per second it makes my main movie's stage animation go crazy at full possible speed and the audio is all out of sync. I have not set export for sharing or action script on this movie clip. I've tried other movie clips that are 30 frames per second and it is all crazy!
Is this a bug? What can I do? I've got 100s of movie clips I need to make. I can't keep remaking them just because flash has a screw loose. I'll go crazy!
-theGiblerOh sorry I goofed! My main time line is 12 fps! I can't belive I didn't see this before.
-
Had Photoshop Elements 12 on my other Mac that recently got smashed, new one has no CD drive. How do I install Elements with my product key? Purchasing an external CD drive is not an option at this time after forking over the 2500 for the new Mac...
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Some one is trying to change my password. Last week i had my icloud accessed and my contacts were deleted. And now i have had an email apparently from myself asking for my apple id password because i change the password when my contacts were wiped. i had my last phone stolen i reported it and blocked the phone if they have managed to access it then how are they getting my details. i am not very happy with this as the icloud didn't back up my photos last time there are pics and videos on that phone of my child. if i cloud did back them up they why haven't they appeared on i cloud. My new phone has also backed up to photo stream and they aren't showing up on icloud either. I am not happy with the security of your system if it is this easy for some one to access all my details on a stolen phone!!!!
You need a new Apple ID to create a new iCloud. After you create an Apple ID, go to System Preferences > iCloud and set up iCloud with it
-
I updated to Adobe Muse 2014 and now the anchors on my site stop working on the page after one click. Vertical scroll and active state on the buttons also do not work. Is this a bug?
I am also dealing with an anchor that stopped working. I tried everything i can think of to make it work, but no luck so far. I hope to see a helpful response here. Thanks.
-
i've updated my iphone 4 (gsm) to ios 6.0.1 and after that it's stuck in recovery mode (itunes logo cable), i tried many solutions but nothing works, did any one has an idea about this , thank you
I should add that this has never been Jailbroken. I keep reading that a lot of times this is the case for a jail broken phone.
I have also gone through the not very helpfull steps on apples site to fix this.. It is not a security issue since i dont have an antivirus or any 3rd party software for my computer. -
I am about to go get my 4th iphone 4s since November! Up in the left corner where it shows your signal strength, it goes into searching mode and stays there. Kills my battery. While in searching, no calls can be made/recieved, no internet, etc. This one has lasted the longest-I got it December 23. Any ideas out there?
Both. The first two, I did use my itunes. The guy at the apple store said that could be the problem. The last time they gave me a new phone and SIM card, and the tech said it wouldnt be the itunes. Just to be safe, I never connected this phone to the itunes until last night-after it started searching- to save everything since I'm sure they will be replacing the phone today. But hey, thanks for the suggestions. I'm about at my wits end with Apple!! Especially since i added a third line to my account just so I could get an iphone back.
-
Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied any one has a solution?? please...
Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Thank you for your service.
I was most disappointed to find, however, that the letters I really wanted (Adobe Garamond Alternate Caps) is not in this collection and indeed, one now has to use another fancy designing program to construct those letters. I can’t afford to buy Photoshop just to construct two special capital letters. I’ve used the B and M in my logo for Balquhidder Music for years - but from jpgs - and I was hoping to have more flexibility in the future. I spent $169 to make sure I am in compliance. But I didn’t get anything of use to me.
I can’t understand why those Alternate Caps are not part of this - or any other package. I thought Adobe was capable of amazing things.
I assume I am whistling in the dark. So have a nice day.Actually, when Adobe moved from Type 1 fonts to OpenType CFF fonts, all the so-called “expert typefaces” were consolidated into the base fonts. In other words Adobe Garamond Pro Regular not only has the Western Latin characters of the original Type 1 version of Adobe Garamond, but also has alternate Latin capitals (with titling, titling floating accents, and stylistic alternates), alternate Latin lowercase (swash and superiors), Latin small capitals (alphabetic and floating accents), ligatures, multiple numeric forms (including lining tabular, lining proportional, oldstyle tabular, oldstyle proportional, superscripts, scientific inferior, numerator, denominator forms, fractions, mathematical operators, etc.) plus a raft of other special symbols.
OpenType fonts are Unicode-based and allow for more than the 256 characters in Type 1 fonts which required multiple typefaces all with mappings to a standard keyboard to accommodate all these glyphs.
Thus, hopefully your disappointment will turn to joy.
To assist you in understanding OpenType fonts and to show you what is in the current Adobe Garamond fonts, I have attached a few PDF files for your perusal.
Let us know if you have any questions.
- Dov
Maybe you are looking for
-
I have a redirect virus/malware that I can't get rid of - Stopzilla ID MalPac.D - any suggestions
I have picked up either a virus or some malware that frequently redirects my browser to intermediate sites. Stopzilla calls it MalPac.D but repeated attempts to remove it with Stopzilla have failed. I tried to update my antivirus (Bitdefender) but ev
-
Static Objects as global Object?
I want to have an object in my application that is global, and changeable to all the other classes/objects inside the program. I was wondering if this is what a static class is? AFAIK, static classes mean that there are only ever one instance of them
-
To implement a hash structure for multidimensional data
hi I have to implement a hash structure (multidimensional data) i.e., like a Grid file. I have to find data points in the given range of the grid file. Any one could help me .... Thanks
-
Where is ADF FACES HTML tags in JDeveloper 11g?
I am using JDeveloper 11.1.1.2.0 for my project. I remembered in 10g I have a list of HTML tags such as, afh:tableLayout, afh:cellFormat, etc under ADF FACES HTML package. However, in new JDeveloper 11g, I could only see ADF Cores and there is no ADF
-
Need media 64 bit server 2003 r2 standers
require media image for installation my original me idea is physical damage so required new one please send it urgent thank you