Is this a bug or just a major inconvenience?

Hello. first off let me say that this is my first iPhone, the 3G. LOVE IT!!
Here is my situation... I work in a laboratory where NO wireless devices are allowed. So, what I do is leave my phone in the car and use the 3G's call forward option in settings/phone. The problem is that the iphone will not save the forwarding phone # and I have to input it twice every day (upon arriving to work in morning and returning from lunch break)
Is there a work around? It would be nice to just press the call forwarding button to "ON" and thats it!
thanks in advance.

What happens during your lunch break, that is does a incoming call go to your IPhone 3G or is it still forwarded? Enabling it is the only option I know of for call forwarding but you must be in a area where the IPhone 3G can receive calls (have a good signal) when you enable it. So, I wonder what happens if you are driving through somewhere that there is no signal and if this causes the IPhone 3G's call forwarding to turn off?
The Omega

Similar Messages

[SOLVED] Is this a bug or just me ?

Chromium freezes when I type something on the adress bar.
[6884:6898:0124/014216:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.freedesktop.NetworkManager': no such name
[6884:6898:0124/014216:ERROR:object_proxy.cc(513)] Failed to call method: org.freedesktop.DBus.Properties.Get: object_path= /org/freedesktop/NetworkManager: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
[6884:6906:0124/014216:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
[6884:6906:0124/014216:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
[6884:6884:0124/014216:ERROR:object_proxy.cc(513)] Failed to call method: org.chromium.Mtpd.EnumerateStorage: object_path= /org/chromium/Mtpd: org.freedesktop.DBus.Error.ServiceUnknown: The name org.chromium.Mtpd was not provided by any .service files
Is anyone facing the same issue ?
L.E Installing dbus solved the issue.
Last edited by xfce (2013-01-23 23:58:57)

I would still consider this a bug -- if the CAS doesn't like it then it can reject the formula like it does elsewhere in the calculator eg...
in Home (13)(3) is entered and when the enter key is pressed it becomes: (13)*(3) 39
in CAS (13)(3) is entered, enter key pressed it becomes: 39 39
in Home (13)(3)^2 is entered, enter key pressed it becomes: (13)*(3)^2 117
in CAS (13)(3)^2 is entered, enter key pressed it becomes: 39^2 1521
true
Home sees MN as M*N ; whereas
CAS sees mn as one variable mn ; whereas
Solver sees MN as M*N but
Solver sees M(N) as a Syntax error which needs to be corrected, but
Solver sees (M)(N) as (M)*(N) pretty much the same as in Home....
just seems like unneccessare confusion setting students up for failure,
but thanks for your help and insight

Is this a bug or just my issue?

when synchronising images the white balance frequently does not sync whereas everything else does. If I do it again with white balance the only ticked box it still doesn't change the other images to be the same. HOWEVER!...sometimes it does...

The issue appears when the update process creates the index cndx_BusinessDataLocalizedLabel. This is a known cause which is under investigation internally. Currently it seems to plan to release in CRM 2015 SP1

HT4236 on syncing photos to my iphone from my mac (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version o

on syncing photos to my iphone from my mac (snow leopard) (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version on iphn?

Thanks for your reply
I solved my problem,
Definitely a bug in syncing through itunes.
- Connect Iphone with MacBook Pro through USB
- Go to iphone on itunes, photos, deselect photo synchronization.
- Sync (all pics will be removed from iphone)
- Close itunes, iphoto, disconnect iphone
- Select in finder: (home)-pictures-iphoto library.
- Sec click on iphoto library and choose "show package contents"
- Delete iPod Photo Cache
- Close finder
- Empty trash
- Reconnect iphone
- Allow photo synchronization again and everything works smooth.
After this, changes made in iphoto are instantaneously reflected in iphone photos.
Once every hundred photos, one gets detached from iphoto and then changes are no longer reflected (buggy) :-(
In this case I erase the photo in iphoto, sync, go back to iphoto trash, reestablish the photo from the trash and sync again.
Hope this improves. Still have to try cloud though.
Thanks
RC

In iOS 7 you can still make calls from the locked screen. Just swipe the missed call numbers to the right. Is this a bug?

In iOS 7 you can still make calls from the locked screen. Just swipe the missed call numbers to the right. Is this a bug?

How is it a security breach? You're free to turn off lock screen notifications for the phone app so that no one can do that.... even if they can, they can only call the number that called you... nothing else. (well, except for 900 or whatever the emergency services number is where you are, but that's required by law).

Is this bug or just me? HELP PLEASE!!!!!!!!!

hi all, i have 3 very simple class it just calling a method from Layout class. they are all from different package. class path are fine because i can create Layout but i cant call it methods from package ROSServer with package ROSGui.sharedGui it is fine. i dont kno what kinda error or bug this is
have never come across one even a simple class like this :(
this is kinda urgen, please help me!!!!!!!!!
thanks in advance <3
this class can compile just fine no problem
package Domain;
import java.util.*;
* This Class Create a Layout Object
public class Layout{
     /** Create an empty Layout */
     public Layout(){
     public String getName(){return name;}
     public String name;
this class can compile just fine no problem
package ROSGui.sharedGui;
import Domain.*;
public class SharedToolBar{
     public SharedToolBar(Layout l){
          Layout layout = l;
          layout.getName();
// Variables declaration
// End of variables declaration
this class can not compile error "cannot resolve symbol"
package ROSServer;
import Domain.*;
* This Class contains all SQL methods required to modify database and getting Connection
* from DBConnect
final class ServerHandler{
     ServerHandler(Layout l){
          Layout layout = l;
          layout.getName();
// Variables declaration
// End of variables declaration
}

It's an easy problem:
Do yourself a favor and post the actual error next time. Or, better yet, read the error yourself, think about what it's telling you, BELIEVE WHAT IT SAYS, and act on it. There's no reason why anybody should be posting compilation errors to a forum.
You can only have one package statement in a .java source file, and it's got to be the first statement in the file.
Put each class in its own file and make them all public. Recompile. When I did that, they all compiled just fine.

Why is the message app popping up on my mac when everything has been disabled on my iphone and mac, I use my phone for messages, not my mac. Is this a bug? I just want it off my mac forever!

Why is the message app popping up on my mac when everything has been disabled on my iphone and mac as per the instructions all over this forum, I use my phone for messages, not my mac. Is this a bug? I just want it off my mac forever!
Have disabled in Messages > preferences on the Mac
imessage is disabled on my iphone
Same goes for Safari which pops up on the mac when I open it on my iphone, how can I disable it all?

Thanks but have signed out, disabled and nothing.
It's Yosemite not Mavericks.
What it won't let me do is delete the account as the - button is greyed
out.
It won't let me delete the app from the OS
On Monday, February 2, 2015, Apple Support Communities Updates <

I bought LR 5 on Oct 16, 2014. I just tried to export photos with watermark and it wont work. After reading tutorials and following directions, only a few photos out of 100 show up with watermark, but not everytime. Is this a bug and how does it get fixed

I bought LR 5 Oct 16 this year. Why doesn't my watermark work when I export photos? I followed tutorials and still it does not work. Once, a few photos out of about 100 exported with the watermark, but only once. Is this a bug? how to fix? Also, how to I get rid of unwanted presents?

Are you exporting as JPG or TIFF or PSD?
Any other format (including "Original") will not show a watermark.

XFCE bug or just me ?

I can't reboot or logout using the panel buttons neither to start firefox trough xfce menu.
Starting mozzila from XFCE Menu:
Menu > Internet > Firefox - > i get nothing on the screen, no errors
Menu > Web Browser - > i get an eror: Failed to execute default web browser Input/output error.
Trying to reboot/logout and i get this: Failed to run action "Log Out" Session Manager must be in idle state when requesting a shut down.
Right now im running firefox as root from CLI.
root@pyndrive]# firefox
GLib-GIO-Message: Using the 'memory' GSettings backend. Your settings will not be saved or shared with other applications.
dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Aug 9 19:24:46 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 37a58000 - 37d24000
[ 0.000000] Allocated new RAMDISK: 37532000 - 377fdc44
[ 0.000000] Move RAMDISK from 0000000037a58000 - 0000000037d23c43 to 37532000 - 377fdc43
[ 0.000000] ACPI: RSDP 000e0000 00024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 3fff0030 00034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 3fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 3fff0410 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 3fff0200 00040
[ 0.000000] ACPI: SSDT 3fff0240 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c151ec80, node_mem_map f6d31200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bffc0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d1d000 s31424 r0 d21824 u53248
[ 0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c15dc78e-e70d-4eb5-a0b2-c25b79bc6b34 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2096896 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[ 0.000000] Memory: 1027300k/1048512k available (3810k kernel code, 20760k reserved, 1472k data, 524k init, 139208k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1529000 - 0xc15ac000 ( 524 kB)
[ 0.000000] .data : 0xc13b8837 - 0xc1528840 (1472 kB)
[ 0.000000] .text : 0xc1000000 - 0xc13b8837 (3810 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3062.475 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6127.15 BogoMIPS (lpj=10208250)
[ 0.003340] pid_max: default: 32768 minimum: 301
[ 0.003357] Security Framework initialized
[ 0.003361] AppArmor: AppArmor disabled by boot time parameter
[ 0.003373] Mount-cache hash table entries: 512
[ 0.003498] Initializing cgroup subsys cpuacct
[ 0.003502] Initializing cgroup subsys memory
[ 0.003508] Initializing cgroup subsys devices
[ 0.003511] Initializing cgroup subsys freezer
[ 0.003515] Initializing cgroup subsys net_cls
[ 0.003518] Initializing cgroup subsys blkio
[ 0.003667] mce: CPU supports 0 MCE banks
[ 0.003726] using mwait in idle threads.
[ 0.004052] SMP alternatives: switching to UP code
[ 0.016665] Freeing SMP alternatives: 16k freed
[ 0.016665] ACPI: Core revision 20120320
[ 0.017157] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.017305] ftrace: allocating 16939 entries in 34 pages
[ 0.026695] weird, boot CPU (#0) not listed by the BIOS.
[ 0.026702] SMP motherboard not detected.
[ 0.026704] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.029998] SMP disabled
[ 0.029998] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[ 0.046700] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.046716] Brought up 1 CPUs
[ 0.046717] Total of 1 processors activated (6127.15 BogoMIPS).
[ 0.046797] devtmpfs: initialized
[ 0.047527] NET: Registered protocol family 16
[ 0.047616] ACPI: bus type pci registered
[ 0.120467] PCI: PCI BIOS revision 2.10 entry at 0xfc040, last bus=0
[ 0.120470] PCI: Using configuration type 1 for base access
[ 0.120823] bio: create slab <bio-0> at 0
[ 0.120861] ACPI: Added _OSI(Module Device)
[ 0.120863] ACPI: Added _OSI(Processor Device)
[ 0.120864] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.120865] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.121097] ACPI: EC: Look up EC in DSDT
[ 0.121296] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.123127] ACPI: Interpreter enabled
[ 0.123132] ACPI: (supports S0 S5)
[ 0.123139] ACPI: Using PIC for interrupt routing
[ 0.124453] ACPI: No dock devices found.
[ 0.124457] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.124499] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.124559] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.124561] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.124563] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.124565] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffdfffff] (ignored)
[ 0.124566] PCI: root bus 00: using default resources
[ 0.124587] PCI host bridge to bus 0000:00
[ 0.124589] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.124590] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.124631] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.124979] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.125505] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.125890] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
[ 0.126170] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[ 0.126989] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.132279] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.132960] pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
[ 0.134025] pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
[ 0.137088] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.137730] pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
[ 0.138343] pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
[ 0.138952] pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
[ 0.142047] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[ 0.142145] pci 0000:00:05.0: reg 10: [io 0xd100-0xd1ff]
[ 0.142219] pci 0000:00:05.0: reg 14: [io 0xd200-0xd23f]
[ 0.142677] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.143395] pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
[ 0.146872] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.147490] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.148158] pci 0000:00:0d.0: reg 10: [io 0xd240-0xd247]
[ 0.149357] pci 0000:00:0d.0: reg 18: [io 0xd250-0xd257]
[ 0.150594] pci 0000:00:0d.0: reg 20: [io 0xd260-0xd26f]
[ 0.151197] pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff]
[ 0.152141] pci_bus 0000:00: on NUMA node 0
[ 0.152150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.152779] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.155212] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
[ 0.155372] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.155426] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.155485] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.155574] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.155577] vgaarb: loaded
[ 0.155578] vgaarb: bridge control possible 0000:00:02.0
[ 0.155606] PCI: Using ACPI for IRQ routing
[ 0.155607] PCI: pci_cache_line_size set to 64 bytes
[ 0.155769] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.155771] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[ 0.155836] NetLabel: Initializing
[ 0.155837] NetLabel: domain hash size = 128
[ 0.155838] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.155846] NetLabel: unlabeled traffic allowed by default
[ 0.158830] pnp: PnP ACPI init
[ 0.158842] ACPI: bus type pnp registered
[ 0.158896] pnp 00:00: [bus 00-ff]
[ 0.158899] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.158900] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.158902] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.158903] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.158905] pnp 00:00: [mem 0x40000000-0xffdfffff window]
[ 0.158924] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.158941] pnp 00:01: [io 0x0060]
[ 0.158942] pnp 00:01: [io 0x0064]
[ 0.158944] pnp 00:01: [irq 1]
[ 0.158957] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.158963] pnp 00:02: [io 0x0000-0x000f]
[ 0.158965] pnp 00:02: [io 0x0080-0x008f]
[ 0.158966] pnp 00:02: [io 0x00c0-0x00df]
[ 0.158967] pnp 00:02: [dma 4]
[ 0.158980] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.159007] pnp 00:03: [irq 12]
[ 0.159020] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.159028] pnp 00:04: [io 0x0378-0x037f]
[ 0.159030] pnp 00:04: [io 0x0778-0x077f]
[ 0.159031] pnp 00:04: [irq 7]
[ 0.159043] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.159396] pnp: PnP ACPI: found 5 devices
[ 0.159397] ACPI: ACPI bus type pnp unregistered
[ 0.195989] Switching to clocksource acpi_pm
[ 0.196010] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.196012] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.196040] NET: Registered protocol family 2
[ 0.196075] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.196148] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.196307] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.196380] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.196381] TCP: reno registered
[ 0.196383] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.196386] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.196422] NET: Registered protocol family 1
[ 0.196429] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.196453] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.196479] pci 0000:00:02.0: Boot video device
[ 0.196479] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.196479] PCI: setting IRQ 11 as level-triggered
[ 0.250191] PCI: CLS 0 bytes, default 64
[ 0.250221] Unpacking initramfs...
[ 0.293939] Freeing initrd memory: 2864k freed
[ 0.294414] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.294524] apm: BIOS not found.
[ 0.294683] audit: initializing netlink socket (disabled)
[ 0.294698] type=2000 audit(1344869699.293:1): initialized
[ 0.294934] highmem bounce pool size: 64 pages
[ 0.294940] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.296000] VFS: Disk quotas dquot_6.5.2
[ 0.296033] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.296090] msgmni has been set to 1740
[ 0.296202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.296217] io scheduler noop registered
[ 0.296219] io scheduler deadline registered
[ 0.296222] io scheduler cfq registered (default)
[ 0.296298] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.296299] vesafb: scrolling: redraw
[ 0.296300] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.296352] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
[ 0.297093] Console: switching to colour frame buffer device 80x30
[ 0.297818] fb0: VESA VGA frame buffer device
[ 0.297881] GHES: HEST is not enabled!
[ 0.297889] isapnp: Scanning for PnP cards...
[ 0.619715] isapnp: No Plug & Play device found
[ 0.619771] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.620131] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.620518] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.620538] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.620588] mousedev: PS/2 mouse device common for all mice
[ 0.620838] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.621270] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.621300] rtc0: alarms up to one day, 114 bytes nvram
[ 0.621311] cpuidle: using governor ladder
[ 0.621312] cpuidle: using governor menu
[ 0.621437] TCP: cubic registered
[ 0.621502] NET: Registered protocol family 10
[ 0.621642] NET: Registered protocol family 17
[ 0.621645] Registering the dns_resolver key type
[ 0.621672] Using IPI No-Shortcut mode
[ 0.621723] PM: Hibernation image not present or could not be loaded.
[ 0.621728] registered taskstats version 1
[ 0.622117] rtc_cmos rtc_cmos: setting system clock to 2012-08-13 14:55:00 UTC (1344869700)
[ 0.622138] Initializing network drop monitor service
[ 0.622170] Freeing unused kernel memory: 524k freed
[ 0.622287] Write protecting the kernel text: 3812k
[ 0.622302] Write protecting the kernel read-only data: 1124k
[ 0.629298] systemd-udevd[34]: starting version 187
[ 0.652855] SCSI subsystem initialized
[ 0.656712] usbcore: registered new interface driver usbfs
[ 0.656712] usbcore: registered new interface driver hub
[ 0.657996] libata version 3.00 loaded.
[ 0.658210] ata_piix 0000:00:01.1: version 2.13
[ 0.660267] usbcore: registered new device driver usb
[ 0.660540] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.660549] scsi0 : ata_piix
[ 0.663678] scsi1 : ata_piix
[ 0.663712] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 0.663714] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 0.663989] ahci 0000:00:0d.0: version 3.0
[ 0.664466] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 0.664469] PCI: setting IRQ 5 as level-triggered
[ 0.664569] ahci: SSS flag set, parallel bus scan disabled
[ 0.664708] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 0.664711] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 0.666961] scsi2 : ahci
[ 0.667004] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 5
[ 0.667068] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.667084] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
[ 0.667110] ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
[ 0.720357] hub 1-0:1.0: USB hub found
[ 0.720368] hub 1-0:1.0: 8 ports detected
[ 0.820420] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 0.820777] ata2.00: configured for UDMA/33
[ 0.821241] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 0.986822] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.986891] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 0.986893] ata3.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 0.986975] ata3.00: configured for UDMA/133
[ 0.987185] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 0.992040] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 0.992042] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.992220] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.992309] sd 2:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
[ 0.992335] sd 2:0:0:0: [sda] Write Protect is off
[ 0.992337] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.992348] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.000483] sda: sda1 sda2
[ 1.000643] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.106793] usb 1-1: new full-speed USB device number 2 using ohci_hcd
[ 1.300886] Refined TSC clocksource calibration: 3062.629 MHz.
[ 1.300892] Switching to clocksource tsc
[ 1.343527] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input1
[ 1.343621] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 1.343732] usbcore: registered new interface driver usbhid
[ 1.343734] usbhid: USB HID core driver
[ 1.442375] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.403131] systemd-udevd[136]: starting version 188
[ 2.812740] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 2.812743] PCI: setting IRQ 9 as level-triggered
[ 2.813203] input: Unspecified device as /devices/virtual/input/input2
[ 2.813300] vboxguest: major 0, IRQ 9, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[ 2.813302] vboxguest: Successfully loaded version 4.1.18_OSE (interface 0x00010004)
[ 2.836261] vboxsf: Successfully loaded version 4.1.18_OSE (interface 0x00010004)
[ 2.948069] Linux agpgart interface v0.103
[ 2.956064] [drm] Initialized drm 1.1.0 20060810
[ 2.956575] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.956576] [drm] No driver support for vblank timestamp query.
[ 2.956578] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
[ 3.030274] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.030280] ACPI: Power Button [PWRF]
[ 3.030471] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
[ 3.030474] ACPI: Sleep Button [SLPF]
[ 3.046817] ACPI: AC Adapter [AC] (on-line)
[ 3.094543] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.094545] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.094837] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 3.094840] PCI: setting IRQ 10 as level-triggered
[ 3.214262] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.316722] psmouse serio1: hgpk: ID: 10 00 64
[ 3.318607] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 3.321611] parport_pc 00:04: reported by Plug and Play ACPI
[ 3.393294] ppdev: user-space parallel port driver
[ 3.428764] microcode: CPU0 sig=0x206a7, pf=0x1, revision=0x0
[ 3.439417] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 3.541306] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:4f:73:56
[ 3.541314] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.541340] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 3.871259] intel8x0_measure_ac97_clock: measured 52595 usecs (6240 samples)
[ 3.871261] intel8x0: measured clock 118642 rejected
[ 4.226780] intel8x0_measure_ac97_clock: measured 53281 usecs (7200 samples)
[ 4.226783] intel8x0: measured clock 135132 rejected
[ 4.583408] intel8x0_measure_ac97_clock: measured 53223 usecs (7200 samples)
[ 4.583411] intel8x0: measured clock 135279 rejected
[ 4.583412] intel8x0: clocking to 48000
[ 5.046848] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 5.046980] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 5.506731] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.507267] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 5.507655] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.897707] eth0: no IPv6 routers present
[ 33.270665] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
I've just reinstalled XFCE but nothing has changed.:( I think has something to do with https://bugs.launchpad.net/ubuntu/+sour … comments/3
Sorry for my bad english. Thank You.
Last edited by xfce (2012-08-14 05:48:24)

xfce wrote:
I can't reboot or logout using the panel buttons neither to start firefox trough xfce menu.
Starting mozzila from XFCE Menu:
Menu > Internet > Firefox - > i get nothing on the screen, no errors
Menu > Web Browser - > i get an eror: Failed to execute default web browser Input/output error.
Trying to reboot/logout and i get this: Failed to run action "Log Out" Session Manager must be in idle state when requesting a shut down.
Right now im running firefox as root from CLI.
root@pyndrive]# firefox
GLib-GIO-Message: Using the 'memory' GSettings backend. Your settings will not be saved or shared with other applications.
dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Aug 9 19:24:46 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 37a58000 - 37d24000
[ 0.000000] Allocated new RAMDISK: 37532000 - 377fdc44
[ 0.000000] Move RAMDISK from 0000000037a58000 - 0000000037d23c43 to 37532000 - 377fdc43
[ 0.000000] ACPI: RSDP 000e0000 00024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 3fff0030 00034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 3fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 3fff0410 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 3fff0200 00040
[ 0.000000] ACPI: SSDT 3fff0240 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c151ec80, node_mem_map f6d31200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bffc0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d1d000 s31424 r0 d21824 u53248
[ 0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c15dc78e-e70d-4eb5-a0b2-c25b79bc6b34 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2096896 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[ 0.000000] Memory: 1027300k/1048512k available (3810k kernel code, 20760k reserved, 1472k data, 524k init, 139208k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1529000 - 0xc15ac000 ( 524 kB)
[ 0.000000] .data : 0xc13b8837 - 0xc1528840 (1472 kB)
[ 0.000000] .text : 0xc1000000 - 0xc13b8837 (3810 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3062.475 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6127.15 BogoMIPS (lpj=10208250)
[ 0.003340] pid_max: default: 32768 minimum: 301
[ 0.003357] Security Framework initialized
[ 0.003361] AppArmor: AppArmor disabled by boot time parameter
[ 0.003373] Mount-cache hash table entries: 512
[ 0.003498] Initializing cgroup subsys cpuacct
[ 0.003502] Initializing cgroup subsys memory
[ 0.003508] Initializing cgroup subsys devices
[ 0.003511] Initializing cgroup subsys freezer
[ 0.003515] Initializing cgroup subsys net_cls
[ 0.003518] Initializing cgroup subsys blkio
[ 0.003667] mce: CPU supports 0 MCE banks
[ 0.003726] using mwait in idle threads.
[ 0.004052] SMP alternatives: switching to UP code
[ 0.016665] Freeing SMP alternatives: 16k freed
[ 0.016665] ACPI: Core revision 20120320
[ 0.017157] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.017305] ftrace: allocating 16939 entries in 34 pages
[ 0.026695] weird, boot CPU (#0) not listed by the BIOS.
[ 0.026702] SMP motherboard not detected.
[ 0.026704] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.029998] SMP disabled
[ 0.029998] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[ 0.046700] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.046716] Brought up 1 CPUs
[ 0.046717] Total of 1 processors activated (6127.15 BogoMIPS).
[ 0.046797] devtmpfs: initialized
[ 0.047527] NET: Registered protocol family 16
[ 0.047616] ACPI: bus type pci registered
[ 0.120467] PCI: PCI BIOS revision 2.10 entry at 0xfc040, last bus=0
[ 0.120470] PCI: Using configuration type 1 for base access
[ 0.120823] bio: create slab <bio-0> at 0
[ 0.120861] ACPI: Added _OSI(Module Device)
[ 0.120863] ACPI: Added _OSI(Processor Device)
[ 0.120864] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.120865] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.121097] ACPI: EC: Look up EC in DSDT
[ 0.121296] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.123127] ACPI: Interpreter enabled
[ 0.123132] ACPI: (supports S0 S5)
[ 0.123139] ACPI: Using PIC for interrupt routing
[ 0.124453] ACPI: No dock devices found.
[ 0.124457] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.124499] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.124559] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.124561] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.124563] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.124565] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffdfffff] (ignored)
[ 0.124566] PCI: root bus 00: using default resources
[ 0.124587] PCI host bridge to bus 0000:00
[ 0.124589] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.124590] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.124631] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.124979] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.125505] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.125890] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
[ 0.126170] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[ 0.126989] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.132279] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.132960] pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
[ 0.134025] pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
[ 0.137088] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.137730] pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
[ 0.138343] pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
[ 0.138952] pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
[ 0.142047] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[ 0.142145] pci 0000:00:05.0: reg 10: [io 0xd100-0xd1ff]
[ 0.142219] pci 0000:00:05.0: reg 14: [io 0xd200-0xd23f]
[ 0.142677] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.143395] pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
[ 0.146872] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.147490] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.148158] pci 0000:00:0d.0: reg 10: [io 0xd240-0xd247]
[ 0.149357] pci 0000:00:0d.0: reg 18: [io 0xd250-0xd257]
[ 0.150594] pci 0000:00:0d.0: reg 20: [io 0xd260-0xd26f]
[ 0.151197] pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff]
[ 0.152141] pci_bus 0000:00: on NUMA node 0
[ 0.152150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.152779] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.155212] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
[ 0.155372] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.155426] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.155485] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.155574] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.155577] vgaarb: loaded
[ 0.155578] vgaarb: bridge control possible 0000:00:02.0
[ 0.155606] PCI: Using ACPI for IRQ routing
[ 0.155607] PCI: pci_cache_line_size set to 64 bytes
[ 0.155769] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.155771] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[ 0.155836] NetLabel: Initializing
[ 0.155837] NetLabel: domain hash size = 128
[ 0.155838] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.155846] NetLabel: unlabeled traffic allowed by default
[ 0.158830] pnp: PnP ACPI init
[ 0.158842] ACPI: bus type pnp registered
[ 0.158896] pnp 00:00: [bus 00-ff]
[ 0.158899] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.158900] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.158902] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.158903] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.158905] pnp 00:00: [mem 0x40000000-0xffdfffff window]
[ 0.158924] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.158941] pnp 00:01: [io 0x0060]
[ 0.158942] pnp 00:01: [io 0x0064]
[ 0.158944] pnp 00:01: [irq 1]
[ 0.158957] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.158963] pnp 00:02: [io 0x0000-0x000f]
[ 0.158965] pnp 00:02: [io 0x0080-0x008f]
[ 0.158966] pnp 00:02: [io 0x00c0-0x00df]
[ 0.158967] pnp 00:02: [dma 4]
[ 0.158980] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.159007] pnp 00:03: [irq 12]
[ 0.159020] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.159028] pnp 00:04: [io 0x0378-0x037f]
[ 0.159030] pnp 00:04: [io 0x0778-0x077f]
[ 0.159031] pnp 00:04: [irq 7]
[ 0.159043] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.159396] pnp: PnP ACPI: found 5 devices
[ 0.159397] ACPI: ACPI bus type pnp unregistered
[ 0.195989] Switching to clocksource acpi_pm
[ 0.196010] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.196012] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.196040] NET: Registered protocol family 2
[ 0.196075] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.196148] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.196307] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.196380] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.196381] TCP: reno registered
[ 0.196383] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.196386] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.196422] NET: Registered protocol family 1
[ 0.196429] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.196453] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.196479] pci 0000:00:02.0: Boot video device
[ 0.196479] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.196479] PCI: setting IRQ 11 as level-triggered
[ 0.250191] PCI: CLS 0 bytes, default 64
[ 0.250221] Unpacking initramfs...
[ 0.293939] Freeing initrd memory: 2864k freed
[ 0.294414] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.294524] apm: BIOS not found.
[ 0.294683] audit: initializing netlink socket (disabled)
[ 0.294698] type=2000 audit(1344869699.293:1): initialized
[ 0.294934] highmem bounce pool size: 64 pages
[ 0.294940] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.296000] VFS: Disk quotas dquot_6.5.2
[ 0.296033] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.296090] msgmni has been set to 1740
[ 0.296202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.296217] io scheduler noop registered
[ 0.296219] io scheduler deadline registered
[ 0.296222] io scheduler cfq registered (default)
[ 0.296298] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.296299] vesafb: scrolling: redraw
[ 0.296300] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.296352] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
[ 0.297093] Console: switching to colour frame buffer device 80x30
[ 0.297818] fb0: VESA VGA frame buffer device
[ 0.297881] GHES: HEST is not enabled!
[ 0.297889] isapnp: Scanning for PnP cards...
[ 0.619715] isapnp: No Plug & Play device found
[ 0.619771] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.620131] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.620518] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.620538] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.620588] mousedev: PS/2 mouse device common for all mice
[ 0.620838] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.621270] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.621300] rtc0: alarms up to one day, 114 bytes nvram
[ 0.621311] cpuidle: using governor ladder
[ 0.621312] cpuidle: using governor menu
[ 0.621437] TCP: cubic registered
[ 0.621502] NET: Registered protocol family 10
[ 0.621642] NET: Registered protocol family 17
[ 0.621645] Registering the dns_resolver key type
[ 0.621672] Using IPI No-Shortcut mode
[ 0.621723] PM: Hibernation image not present or could not be loaded.
[ 0.621728] registered taskstats version 1
[ 0.622117] rtc_cmos rtc_cmos: setting system clock to 2012-08-13 14:55:00 UTC (1344869700)
[ 0.622138] Initializing network drop monitor service
[ 0.622170] Freeing unused kernel memory: 524k freed
[ 0.622287] Write protecting the kernel text: 3812k
[ 0.622302] Write protecting the kernel read-only data: 1124k
[ 0.629298] systemd-udevd[34]: starting version 187
[ 0.652855] SCSI subsystem initialized
[ 0.656712] usbcore: registered new interface driver usbfs
[ 0.656712] usbcore: registered new interface driver hub
[ 0.657996] libata version 3.00 loaded.
[ 0.658210] ata_piix 0000:00:01.1: version 2.13
[ 0.660267] usbcore: registered new device driver usb
[ 0.660540] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.660549] scsi0 : ata_piix
[ 0.663678] scsi1 : ata_piix
[ 0.663712] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 0.663714] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 0.663989] ahci 0000:00:0d.0: version 3.0
[ 0.664466] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 0.664469] PCI: setting IRQ 5 as level-triggered
[ 0.664569] ahci: SSS flag set, parallel bus scan disabled
[ 0.664708] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 0.664711] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 0.666961] scsi2 : ahci
[ 0.667004] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 5
[ 0.667068] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.667084] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
[ 0.667110] ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
[ 0.720357] hub 1-0:1.0: USB hub found
[ 0.720368] hub 1-0:1.0: 8 ports detected
[ 0.820420] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 0.820777] ata2.00: configured for UDMA/33
[ 0.821241] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 0.986822] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.986891] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 0.986893] ata3.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 0.986975] ata3.00: configured for UDMA/133
[ 0.987185] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 0.992040] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 0.992042] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.992220] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.992309] sd 2:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
[ 0.992335] sd 2:0:0:0: [sda] Write Protect is off
[ 0.992337] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.992348] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.000483] sda: sda1 sda2
[ 1.000643] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.106793] usb 1-1: new full-speed USB device number 2 using ohci_hcd
[ 1.300886] Refined TSC clocksource calibration: 3062.629 MHz.
[ 1.300892] Switching to clocksource tsc
[ 1.343527] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input1
[ 1.343621] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 1.343732] usbcore: registered new interface driver usbhid
[ 1.343734] usbhid: USB HID core driver
[ 1.442375] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.403131] systemd-udevd[136]: starting version 188
[ 2.812740] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 2.812743] PCI: setting IRQ 9 as level-triggered
[ 2.813203] input: Unspecified device as /devices/virtual/input/input2
[ 2.813300] vboxguest: major 0, IRQ 9, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[ 2.813302] vboxguest: Successfully loaded version 4.1.18_OSE (interface 0x00010004)
[ 2.836261] vboxsf: Successfully loaded version 4.1.18_OSE (interface 0x00010004)
[ 2.948069] Linux agpgart interface v0.103
[ 2.956064] [drm] Initialized drm 1.1.0 20060810
[ 2.956575] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.956576] [drm] No driver support for vblank timestamp query.
[ 2.956578] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
[ 3.030274] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.030280] ACPI: Power Button [PWRF]
[ 3.030471] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
[ 3.030474] ACPI: Sleep Button [SLPF]
[ 3.046817] ACPI: AC Adapter [AC] (on-line)
[ 3.094543] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.094545] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.094837] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 3.094840] PCI: setting IRQ 10 as level-triggered
[ 3.214262] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.316722] psmouse serio1: hgpk: ID: 10 00 64
[ 3.318607] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 3.321611] parport_pc 00:04: reported by Plug and Play ACPI
[ 3.393294] ppdev: user-space parallel port driver
[ 3.428764] microcode: CPU0 sig=0x206a7, pf=0x1, revision=0x0
[ 3.439417] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 3.541306] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:4f:73:56
[ 3.541314] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.541340] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 3.871259] intel8x0_measure_ac97_clock: measured 52595 usecs (6240 samples)
[ 3.871261] intel8x0: measured clock 118642 rejected
[ 4.226780] intel8x0_measure_ac97_clock: measured 53281 usecs (7200 samples)
[ 4.226783] intel8x0: measured clock 135132 rejected
[ 4.583408] intel8x0_measure_ac97_clock: measured 53223 usecs (7200 samples)
[ 4.583411] intel8x0: measured clock 135279 rejected
[ 4.583412] intel8x0: clocking to 48000
[ 5.046848] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 5.046980] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 5.506731] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.507267] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 5.507655] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.897707] eth0: no IPv6 routers present
[ 33.270665] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
I've just reinstalled XFCE but nothing has changed.:( I think has something to do with this https://bugs.launchpad.net/ubuntu/+sour … comments/3
Sorry for my bad english. Thank You.
Please post your daemons from rc.conf. Also, how are you starting Xfce? Reinstalling things usually doesn't accomplish much. I've found it's much better and more efficient to fix the problems when they crop up. Besides, you learn much more that way.

Media Encoder CC - Bug or just finicky?

I'm confused about Media Encoder, and hoping someone can help.
I have a short film that's primarily 4K ProRes augmented with some "flashbacks" that are 1920 by 1080 h264 files. All edits beautifully in my 4K ProRes timeline.
I have some Magic Bullet B&W corrections on the 1080 footage. On the 4K footage, I just have an overall grade in an Adjustment Layer (for now). I can play in Software Mode (CUDA won't work on my Retina Mac - separate thread!) at 1/4 resolution. The 4K stuff looks great, the 1080 pretty bad.
I've been outputting by matching sequence settings. The file is TITANIC, but looks great. I use that file to make various smaller files in APPLE COMPRESSOR. I find it better and more flexible (especially with cropping for 2.35, etc.) What can I say. All in all, the workflow works for me.
So here's the problem. Today I wanted to use In and Out to export a small section for music review with a colleague. No need to have a huge file, I just used Media Encoder in a Vimeo SD mode.
In the first attempt, the 1080 stuff oddly looked terrible. Just as it does when viewed at 1/4 resolution. To make sure everything was okay, I outputted that section at Matched Sequence settings. All good - the 1080 stuff had the Magic Bullet B&W look working great.
Then I tried again with the Vimeo SD setting. Only this time I checked Render at Maximum Resolution. Took FOREVER, but all good again. The 1080 stuff was fine.
Next I renendered "in to out" in my sequence (I hadn't done so previously - I was working "red line"). Output without checking Max Render Quality. Back to the horrible 1080 stuff.
Finally, I chose "use previews", but not max render. All good again.
So, at last a question. Does this make sense? I never before had to use either Maximum Render OR Use Previews to get acceptable quality with "device" settings. Is this a bug? Or related to my disparate picture sizes? Or something else? Thank you all!

[Moved to AME forum.]
I can see where this would be expected behavior.

Iphone 6 tells me that "Item not available" in my country UK, when i click on the itunes store icon for the app to open the music, movies or tv shows section of the app. is this a bug?

I am based in the UK and have just got a new iphone 6, everything works well except when i try to turn on the itunes store app - i can do a search and buy music etc that way, within the app, however, if i go to Music, Movies or the TV shows section within the Store app, i get a message come up saying "Item Not Available" - This item you've requested is not currently available in the UK Store, but it is available in the US store. Tap Change Store to view this item". I therefore cannot browse the music, movies or tv shows sections at all, nothing shows up except that message. All my previous itunes purchases have downloaded ok, and i can access them. My apple ID works fine and restrictions on the iphone are turned OFF. The App Store app works normally. Connection etc is all fine and I can access itunes in the normal way on my ipad and laptop, so this is just an iphone problem. Any ideas? is this a bug? I cant find anyone else with exactly the same problem. By the way, the same message comes up when i click on the red Music icon, on the iphone (situated next to the Safari icon) and then go to the "Store" via that app. my playlists are in tact, but as soon as i click that Store button, I am told that the Item is unavailable - not that i have chosen any Item lol, I just want to access the store in the normal way. Thank you in advance for any suggestions you can give

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

Open Cursor Issue because of file browse Item - Is this a Bug in APEX 3.2

Hi All,
I am using file browse Item to upload file into the database at two places in my application, but it seems whenever I am submitting those two pages, with file path or without file path, its opening an cursor which remains open after that, because of this open cursor count in the application is getting exceeding every time.
For testing this I have made an dummy page containing just file browse item and submit button, and still it is increasing the open cursor count.
Is this a bug in Apex file browse item or there is some other way to handle this.
Please kindly help me in the above issue as this is affecting the production application.
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 5, 2010 9:57 PM
Edited by: user11204334 on Dec 5, 2010 9:58 PM

Hi,
One observation, Apex is switching the Session ID after one got killed ? I was working on Apex page with browse Item to test open cursor count,
after killing the SID (227) on which the open cursor count was getting increase, it APEX automatically switches to new SID(149) for that session.
Now the problem is even if I have two SID's and one hits the maximum open cursor count, It is not switching to other SID instead the whole application becomes unavailable.
STATNAME SID VALUE USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 74 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 227 325 APEX_PUBLIC_USER Killed
opened cursors current 244 15 APEX_PUBLIC_USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 76 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 244 15 APEX_PUBLIC_USER
Please kindly help in this.
Thanks in Advance
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 8, 2010 1:02 AM

Is this a bug of Outlook 2007 about images displaying in signature?

I've done many tests and researched on website or MS KB. But still got no solution.
My issue is:
I make a signature with images linking from website which can be easily accessed.
I setup this signature in Outlook 2007, when I compose a new mail, and choose the signature I set. It won't show the images with a high percentage rate, meanwhile, I try to get into "Signature"-"Signature...",
Outlook2007 gets stuck, then you can not close Outlook or open Internet Explorer unless you kill the process of OUTLOOK.exe.
1. Test are done under a clean XP system and Office 2007 standard fresh installed. Also there are some other staffs who help me test the signature that report the same issue on Office 2007.
2. Images are rendered in 96dpi. They are all in very small size stored on website, can be easily accessed without network connctivity problem.
3. The signature is made by simple HTML language not by Outlook signature setup wizard. but in this case, you can ignore which method I use to create the signature. The images in signature can be displayed well in Outlook 2003 &
2010. Also I have tried insert images using "link to file" in Outlook signature setup wizard, got same issue.
4. Don't suggest me to store the images locally. These images should be updated after a period. You can not ask the company staffs to update these images manually by themselves. and even if the images are stored locally, the images won't be shown
in Outlook 2007 with a high percentage rate.
5. I've tried setup signature with or without an account profile, got same issue.
6. I 've tried without an accout profile, just copy the signature file to Outlook signature folder, unplug the network cable, and "new mail" then load the signature, of course, the images won't be shown because network connection doesn't exist,
and then when I try to get into "Signature"-"Signature...", the Outlook interface also gets stuck. So I think Outlook 2007 may have some problem on detecting the network connectivity.
7. It is not possible to upgrate the version of Office. Since Office 2007 isn't out of date and is powerful enough for us, no one want to pay more money just to avoid this issue.
I don't know why I cannot upload a screenshot for troubleshooting. If needed. I can send a mail with screenshot attached.
So far to now, I still get no solution, I think this is a bug of Outlook 2007, because the same signature, there is no problem on Outlook 2003 & 2010. Hope someone of MS staff can see this article and report to technical support center.
I would appriciate anyone's kindly help but please consider that you understand what I am talking about. I don't want to waste time for each of us.
thanks in advanced.

What kind of problem about the display image in signature?
How do you add the image into the message body when you send the message?
Does it show correct through Web-based access?
Outlook 2007 doesn't support some of Style Element, you may reference the link as below:
http://www.campaignmonitor.com/css/
Thanks.
Tony Chen
TechNet Community Support
Thanks for your reply, I know that some Style Elements won't be supported in Outlook, but this is not the reason.
Please refer to my post previously, I post it but get no response.
http://social.technet.microsoft.com/Forums/office/en-US/481170b1-f23f-4d46-9914-823326491846/is-this-a-bug-of-outlook-2007-about-images-displaying-in-signature?forum=outlook

Is this a bug for 10.3.9 installation

Hi everyone especially mac experts
This is my first visit to this forum. I have been using my Powerbook g4 12 inch for 3 - 4 years, never had any problem til now!!
My mac has problem all the sudden, got hacked or something, I dont know, I cannot even restart, it hung since apple logo appear, only way is insert install disc + press C with only one option it allowed me to do "erase and install" no backup no upgrade!!!!
Anyway, that is not my question, it just a whining, my question is when i tried to reinstall with my installation CD that came with my powerbook and/or panther CD with 3 blacks and 1 codeX, which I got it when I was a member of developer connect. The series of problem are as follow
1. during installation of CD2, i got installation failure with error messages said some packages cannot install!!!
2. after i ignore (1), by click "quit" which is only one option anyway, os started to ask me to fill in all information include setting user name and password for admin account. so i did. Then I start to do "software update", and it failed to update/install QuickTime 7.x.x. Then i tried to download only, unpackage and install myself, it has the same results
3. From (2) i search solution on mac website by using winXP, and found that i have to remove some packages in /Library/../receipts/ and reinsert CD 2 again to reinstall, cool.. i will give it a shot. Unfortunately, it asked for admin password and i could not give a correct password, but i remember and have it written down on a paper. Then i check at Preference->account->admin and see it shows 7 digits or * instead of 9 digits. I wonder that someone might hacked into my computer and change it.
Therefore, I decide to reinstall again, this time, i spent more time by include erase disk with option "write zero to disk" and no network connection to make sure there is no trace from hacker! Unfortunately, I got the same problem from (1) to (3) without update software d/l. therefore, i believe (3)is a bug it is obvious from my observation, if i cannot solve (3) i will not be able to solve (1) and (2), and i will not have my mac back to work
Please give me advice, i already lost all my data and spent my weekend trying to fix these problems, which non can be fixed (yet)
Thanks in advance

Roam,
Thanks again for your suggestion,
"Furthermore one should always Repair Permissions both before doing a Software Update and again afterwards."
I honestly dont know anything about this "Repair Permissions" from the name, i though it is a verification of authentication to repair OS or some kind of credential issue, and since i m admin user then there is no point to verify it, i should be allowed to do so. Again it is my first time to do this thing in 3 - 4 years of using panther, every time i update software i never ever do this! If this step is essential for every update and installation why dont apple put them as one of TODO step during the processes (as licensing agreement) instead of keep them as an option (just my thought) Anyway, I m glad u tell me about it, and i will give it a shot tonight.
"That may because you didn't have sufficient disk space. In fact running out of disk space can create all sorts of problems. Please tell me how disk space is available on your
start up drive."
That what I thought coz i have only 5.x GB left in 60 GB HD. Thats why I claimed as whining and have to scarify the lost of data by reinstall panther in order to get my mac back to work
"So are you saying it is a bug or it is a hacker, I don't believe it is either"
Please see second update info about password, and i m not impose anyone to believe, thats why the topic is a questioning sentence "Is this a bug.."
"This Discussion site is not Applecare. The people here give their time voluntarily to those who are receptive to help."
Thats why i ask for "mac expert" not "apple authority/technician" and always appreciate any suggestion.
Anyway, that great to hear from you and i have learned new thing from your suggestion. I will let u know when i have tried it.

Is this a bug?: copied movie clip has wrong frame rate and ruins the main movie's sync

Hello,
I am trying to copy a movieclip with a frame rate of 30 frames per second to a movie that has a frame rate of 30 frames per second. Both movies are actionscript 3 movies. When I do this, my copied movie clip's frame rate reverts to 12 frames per second and all my audio synched animation is trashed. Then when I change it back manually to 30 frames per second it makes my main movie's stage animation go crazy at full possible speed and the audio is all out of sync. I have not set export for sharing or action script on this movie clip. I've tried other movie clips that are 30 frames per second and it is all crazy!
Is this a bug? What can I do? I've got 100s of movie clips I need to make. I can't keep remaking them just because flash has a screw loose. I'll go crazy!
-theGibler

Oh sorry I goofed! My main time line is 12 fps! I can't belive I didn't see this before.

Is this a bug or just a major inconvenience?

Similar Messages

Maybe you are looking for