Is this a bug or just my issue?

when synchronising images the white balance frequently does not sync whereas everything else does. If I do it again with white balance the only ticked box it still doesn't change the other images to be the same. HOWEVER!...sometimes it does...

The issue appears when the update process creates the index cndx_BusinessDataLocalizedLabel. This is a known cause which is under investigation internally. Currently it seems to plan to release in CRM 2015 SP1

Similar Messages

[SOLVED] Is this a bug or just me ?

Chromium freezes when I type something on the adress bar.
[6884:6898:0124/014216:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.freedesktop.NetworkManager': no such name
[6884:6898:0124/014216:ERROR:object_proxy.cc(513)] Failed to call method: org.freedesktop.DBus.Properties.Get: object_path= /org/freedesktop/NetworkManager: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.freedesktop.NetworkManager.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.NetworkManager.service' for details.
[6884:6906:0124/014216:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
[6884:6906:0124/014216:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.chromium.Mtpd': no such name
[6884:6884:0124/014216:ERROR:object_proxy.cc(513)] Failed to call method: org.chromium.Mtpd.EnumerateStorage: object_path= /org/chromium/Mtpd: org.freedesktop.DBus.Error.ServiceUnknown: The name org.chromium.Mtpd was not provided by any .service files
Is anyone facing the same issue ?
L.E Installing dbus solved the issue.
Last edited by xfce (2013-01-23 23:58:57)

I would still consider this a bug -- if the CAS doesn't like it then it can reject the formula like it does elsewhere in the calculator eg...
in Home (13)(3) is entered and when the enter key is pressed it becomes: (13)*(3) 39
in CAS (13)(3) is entered, enter key pressed it becomes: 39 39
in Home (13)(3)^2 is entered, enter key pressed it becomes: (13)*(3)^2 117
in CAS (13)(3)^2 is entered, enter key pressed it becomes: 39^2 1521
true
Home sees MN as M*N ; whereas
CAS sees mn as one variable mn ; whereas
Solver sees MN as M*N but
Solver sees M(N) as a Syntax error which needs to be corrected, but
Solver sees (M)(N) as (M)*(N) pretty much the same as in Home....
just seems like unneccessare confusion setting students up for failure,
but thanks for your help and insight

Is this a bug or just a major inconvenience?

Hello. first off let me say that this is my first iPhone, the 3G. LOVE IT!!
Here is my situation... I work in a laboratory where NO wireless devices are allowed. So, what I do is leave my phone in the car and use the 3G's call forward option in settings/phone. The problem is that the iphone will not save the forwarding phone # and I have to input it twice every day (upon arriving to work in morning and returning from lunch break)
Is there a work around? It would be nice to just press the call forwarding button to "ON" and thats it!
thanks in advance.

What happens during your lunch break, that is does a incoming call go to your IPhone 3G or is it still forwarded? Enabling it is the only option I know of for call forwarding but you must be in a area where the IPhone 3G can receive calls (have a good signal) when you enable it. So, I wonder what happens if you are driving through somewhere that there is no signal and if this causes the IPhone 3G's call forwarding to turn off?
The Omega

I can sync bookmarks on my Firfox for android, but folders aren't sync, i can only get bookmarks from bookmarks main folder. Is a bug or a config issue?

I can sync bookmarks in firefox for android, but only the ones that are on Bookmarks main folder, the folders create below the main folder are not synchronized. Is this a bug or a config issue?
Thanks

Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

Open Cursor Issue because of file browse Item - Is this a Bug in APEX 3.2

Hi All,
I am using file browse Item to upload file into the database at two places in my application, but it seems whenever I am submitting those two pages, with file path or without file path, its opening an cursor which remains open after that, because of this open cursor count in the application is getting exceeding every time.
For testing this I have made an dummy page containing just file browse item and submit button, and still it is increasing the open cursor count.
Is this a bug in Apex file browse item or there is some other way to handle this.
Please kindly help me in the above issue as this is affecting the production application.
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 5, 2010 9:57 PM
Edited by: user11204334 on Dec 5, 2010 9:58 PM

Hi,
One observation, Apex is switching the Session ID after one got killed ? I was working on Apex page with browse Item to test open cursor count,
after killing the SID (227) on which the open cursor count was getting increase, it APEX automatically switches to new SID(149) for that session.
Now the problem is even if I have two SID's and one hits the maximum open cursor count, It is not switching to other SID instead the whole application becomes unavailable.
STATNAME SID VALUE USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 74 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 227 325 APEX_PUBLIC_USER Killed
opened cursors current 244 15 APEX_PUBLIC_USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 76 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 244 15 APEX_PUBLIC_USER
Please kindly help in this.
Thanks in Advance
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 8, 2010 1:02 AM

Hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.

hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.
please help. this issue prevents music from syncing. I have set the sync setting to convert songs to 192kbps AAC to save space, I figure that could slow the sync
down, but it's hanging indefinitely (I've left it for 24 hours with out it completing.)
the the only music that appears on the phone are songs purchased from the iTunes Store. 95% of my collection are rips from my CDs.
thank you for any help!

Yeah it's pretty sad that $1000 phone they put out you such cheap memory It causes issues, I have iPhone 6+128 GB actually this is the second brand-new one they gave me because they keep affording it trying to act like that's not the issue because they're too stupid to know how to check what memory is in each one before they give it to me when I have told them multiple times my back up runs perfectly fine on two 5s phones and a 6 64GB of course running MLC memory.
I told them it's because just like the write ups say I have 809 apps but I have not even put all my music on the phone so I'm still running 50 to 60 gigs free and it crashes and reboots itself sometimes in multitasking and more often than it does that in between multitasking I get a black screen for 1 to 2 seconds in between apps and upon start up the Apple logo screen will flicker and do weird things, One of the genius idiots asked me if I could just delete some of my apps, really that's the answer to fix the phone the customer needs to limit the amount to apps they put on their phone, why the **** get a 128 gig if you can't put on anything you want to it guess they need to start selling them saying you can only put a limited number of apps on them, it's really is a **** joke, I have over $20,000 of Apple merchandise easily and always get the new phone every year but I'm starting to reconsider my decisions in the future because this company is starting to go downhill, The reason water not recalling the phones is because they're dealing with their top-of-the-line thousand dollar phones in this case and most people don't have over two or 300 apps so they're not having as many issues, so basically they have messed up phones they just don't know it in their hands and Apple is just too **** greedy to recall the phones, they'd rather sell customer spends that only work half ***.
Stuff like this will be the downfall of their company, all the people that stay with them because as long as you don't jailbreak their stuff it normally just works without issue will be soon jumping ship if stuff like this keeps up, because I can guarantee they got me thinking now.
not that I wanted to know or should I be expected to but I even offered for them to open up my brand-new phone and just replace the memory to MLC memory which is something I shouldn't have to do with a brand-new **** phone, they should just make one with the right memory and give me a new phone, actually just don't sell customers that buy the top-of-the-line phone from you trash ones in the first place that would be a great option.
what burns me up the most is when you talk to AppleCare and Genius Bar they try to act like the issue isn't there and they're unaware of it, they say that Apple hasn't come out with any information about it, yeah that's because they don't want to recall the trash.
Apple has became nothing better than your run-of-the-mill company, android is becoming just as good as they are sad to say this since I have been an Apple fan for so long but there is no excuse for BS like this they have been looking for options to fix my phone for a month now this is not the way you should treat loyal customers, I would've been better off keeping my 5S and in the future just switching to android.
it's pretty sad that the company has no idea how to check which memory is in their **** phone and even after I offered to let them just replace the memory in my new phone by opening up my brand-new phone to replace it they have no idea how to do that either, yeah Genius Bar sure, I think that should change the name to idiot bar and Apple don't care instead of Apple care.

HT4236 on syncing photos to my iphone from my mac (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version o

on syncing photos to my iphone from my mac (snow leopard) (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version on iphn?

Thanks for your reply
I solved my problem,
Definitely a bug in syncing through itunes.
- Connect Iphone with MacBook Pro through USB
- Go to iphone on itunes, photos, deselect photo synchronization.
- Sync (all pics will be removed from iphone)
- Close itunes, iphoto, disconnect iphone
- Select in finder: (home)-pictures-iphoto library.
- Sec click on iphoto library and choose "show package contents"
- Delete iPod Photo Cache
- Close finder
- Empty trash
- Reconnect iphone
- Allow photo synchronization again and everything works smooth.
After this, changes made in iphoto are instantaneously reflected in iphone photos.
Once every hundred photos, one gets detached from iphoto and then changes are no longer reflected (buggy) :-(
In this case I erase the photo in iphoto, sync, go back to iphoto trash, reestablish the photo from the trash and sync again.
Hope this improves. Still have to try cloud though.
Thanks
RC

In iOS 7 you can still make calls from the locked screen. Just swipe the missed call numbers to the right. Is this a bug?

In iOS 7 you can still make calls from the locked screen. Just swipe the missed call numbers to the right. Is this a bug?

How is it a security breach? You're free to turn off lock screen notifications for the phone app so that no one can do that.... even if they can, they can only call the number that called you... nothing else. (well, except for 900 or whatever the emergency services number is where you are, but that's required by law).

My MBP wouldn't start this morning, it was just stuck on white screen with grey logo and fan running. I replaced my magsafe power cord and resolved starting issue. Now I can't connect to internet and iTunes won't load??? Help?

This morning I was just getting the white screen with logo and status bar with fan running. I thought it was an issue with the power adapter so I went out and replaced it. MBP will start now, but won't connect to internet. I have full wi-fi signal. Also, when I try to launch iTunes, it just quits right away. Please help?
-A

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Is this bug or just me? HELP PLEASE!!!!!!!!!

hi all, i have 3 very simple class it just calling a method from Layout class. they are all from different package. class path are fine because i can create Layout but i cant call it methods from package ROSServer with package ROSGui.sharedGui it is fine. i dont kno what kinda error or bug this is
have never come across one even a simple class like this :(
this is kinda urgen, please help me!!!!!!!!!
thanks in advance <3
this class can compile just fine no problem
package Domain;
import java.util.*;
* This Class Create a Layout Object
public class Layout{
     /** Create an empty Layout */
     public Layout(){
     public String getName(){return name;}
     public String name;
this class can compile just fine no problem
package ROSGui.sharedGui;
import Domain.*;
public class SharedToolBar{
     public SharedToolBar(Layout l){
          Layout layout = l;
          layout.getName();
// Variables declaration
// End of variables declaration
this class can not compile error "cannot resolve symbol"
package ROSServer;
import Domain.*;
* This Class contains all SQL methods required to modify database and getting Connection
* from DBConnect
final class ServerHandler{
     ServerHandler(Layout l){
          Layout layout = l;
          layout.getName();
// Variables declaration
// End of variables declaration
}

It's an easy problem:
Do yourself a favor and post the actual error next time. Or, better yet, read the error yourself, think about what it's telling you, BELIEVE WHAT IT SAYS, and act on it. There's no reason why anybody should be posting compilation errors to a forum.
You can only have one package statement in a .java source file, and it's got to be the first statement in the file.
Put each class in its own file and make them all public. Recompile. When I did that, they all compiled just fine.

FXO card disconnect issues!!!!!!!!!! IS this a bug !!!!!!!!!! help out !!!!

I have 2620 router with fxo card. The call is not disconnecting at the fxo side after the call is complete. This issue is happening only with PBX. With PSTN no problem.
I tested all options of our discconecting FXO card from cisco site. It didn't help.
Whether this is bug !!!!!!!!!!! help out guys!!!!!!!!!!!
Anybody faced similiar issues
Thankx

hi
we are facing the same issue : also be careful of the fxo as a source of crosstalk
I will let you know when we have these issues resolved

Why is the message app popping up on my mac when everything has been disabled on my iphone and mac, I use my phone for messages, not my mac. Is this a bug? I just want it off my mac forever!

Why is the message app popping up on my mac when everything has been disabled on my iphone and mac as per the instructions all over this forum, I use my phone for messages, not my mac. Is this a bug? I just want it off my mac forever!
Have disabled in Messages > preferences on the Mac
imessage is disabled on my iphone
Same goes for Safari which pops up on the mac when I open it on my iphone, how can I disable it all?

Thanks but have signed out, disabled and nothing.
It's Yosemite not Mavericks.
What it won't let me do is delete the account as the - button is greyed
out.
It won't let me delete the app from the OS
On Monday, February 2, 2015, Apple Support Communities Updates <

I bought LR 5 on Oct 16, 2014. I just tried to export photos with watermark and it wont work. After reading tutorials and following directions, only a few photos out of 100 show up with watermark, but not everytime. Is this a bug and how does it get fixed

I bought LR 5 Oct 16 this year. Why doesn't my watermark work when I export photos? I followed tutorials and still it does not work. Once, a few photos out of about 100 exported with the watermark, but only once. Is this a bug? how to fix? Also, how to I get rid of unwanted presents?

Are you exporting as JPG or TIFF or PSD?
Any other format (including "Original") will not show a watermark.

Issue when creating SPFILE from pfile;Is this a bug ?

Version : 11.2
os : AIX
I created a pfile from spfile stored it in a non-default location ie. a location other than ORACLE_HOME/dbs
create pfile='/u01/oracle/mytest_pfile.ora' from spfile;I brought down the DB , and started the DB using the above pfile from non-default location
startup pfile='/u01/oracle/mytest_pfile.ora' -- pfile in a non-default locationNow i am creating an SPFILE from the pfile without explicitly mentioning the pfile file name in the non-default file location.
create spfile='/u01/oracle/mytest_spfile_sep23_2011.ora' from pfile;Using strings command (in AIX) I verified the contents of the spfile . It seems that if you don't mention the file name of pfile , then oracle reads the pfile which is in
ORACLE_HOME/dbs and NOT the pfile from the non-default location which is used to startup the instance !!! . Isn't this a bug?

No ,it's not a bug.
order of precedence of parameter file is as follow :
1.) spfileSID.ora --- non default
2.) default spfile
3.) initSID.ora --- non default pfile
4.) default pfile
In your case i.e; create spfile='/u01/oracle/mytest_spfile_sep23_2011.ora' from pfile;
here it is reading pfile from fefault pfile because it will always search the pfile or spfile in dba directory .
if you want to create the spfile from non-default pfile then create spfile as :
create spfile='/u01/oracle/mytest_spfile_sep23_2011.ora' from pfile='/u01/oracle/mytest_pfile.ora' ;
--neeraj

Is this a bug of Outlook 2007 about images displaying in signature?

I've done many tests and researched on website or MS KB. But still got no solution.
My issue is:
I make a signature with images linking from website which can be easily accessed.
I setup this signature in Outlook 2007, when I compose a new mail, and choose the signature I set. It won't show the images with a high percentage rate, meanwhile, I try to get into "Signature"-"Signature...",
Outlook2007 gets stuck, then you can not close Outlook or open Internet Explorer unless you kill the process of OUTLOOK.exe.
1. Test are done under a clean XP system and Office 2007 standard fresh installed. Also there are some other staffs who help me test the signature that report the same issue on Office 2007.
2. Images are rendered in 96dpi. They are all in very small size stored on website, can be easily accessed without network connctivity problem.
3. The signature is made by simple HTML language not by Outlook signature setup wizard. but in this case, you can ignore which method I use to create the signature. The images in signature can be displayed well in Outlook 2003 &
2010. Also I have tried insert images using "link to file" in Outlook signature setup wizard, got same issue.
4. Don't suggest me to store the images locally. These images should be updated after a period. You can not ask the company staffs to update these images manually by themselves. and even if the images are stored locally, the images won't be shown
in Outlook 2007 with a high percentage rate.
5. I've tried setup signature with or without an account profile, got same issue.
6. I 've tried without an accout profile, just copy the signature file to Outlook signature folder, unplug the network cable, and "new mail" then load the signature, of course, the images won't be shown because network connection doesn't exist,
and then when I try to get into "Signature"-"Signature...", the Outlook interface also gets stuck. So I think Outlook 2007 may have some problem on detecting the network connectivity.
7. It is not possible to upgrate the version of Office. Since Office 2007 isn't out of date and is powerful enough for us, no one want to pay more money just to avoid this issue.
I don't know why I cannot upload a screenshot for troubleshooting. If needed. I can send a mail with screenshot attached.
So far to now, I still get no solution, I think this is a bug of Outlook 2007, because the same signature, there is no problem on Outlook 2003 & 2010. Hope someone of MS staff can see this article and report to technical support center.
I would appriciate anyone's kindly help but please consider that you understand what I am talking about. I don't want to waste time for each of us.
thanks in advanced.

What kind of problem about the display image in signature?
How do you add the image into the message body when you send the message?
Does it show correct through Web-based access?
Outlook 2007 doesn't support some of Style Element, you may reference the link as below:
http://www.campaignmonitor.com/css/
Thanks.
Tony Chen
TechNet Community Support
Thanks for your reply, I know that some Style Elements won't be supported in Outlook, but this is not the reason.
Please refer to my post previously, I post it but get no response.
http://social.technet.microsoft.com/Forums/office/en-US/481170b1-f23f-4d46-9914-823326491846/is-this-a-bug-of-outlook-2007-about-images-displaying-in-signature?forum=outlook

Is this a bug or just my issue?

Similar Messages

Maybe you are looking for