Is this a candidate for virtual key figure ?

Hello BW Experts,
discount amount = sale amount * disc rate
discount amount is only for the analysis purposes, sale amount comes from the billing document, disc rate is manually maintained in a custom r/3 table (brought to BW as ODS).
Disc rate can change daily. In the Bex report discount amount should be calculated based on the month end disc rate.
wondering different methods to achive the same:
1) make the discount amount as the virtual kf and lookup the month end rate from disc rate ods
2) is it possible to declare the disc amount as the keyfigure with some sort of aggregation / cumulation ?
any suggestions appreciated..
Thanks,
BWer

Hello,
Option 1 is simple and more practical where as option 2 falls under the category of non-cumulative key figures, which is slightly complex to handle.
Option 2 also depends on number of entries in the Info cube, if the data in the Info cube is not huge then 2nd option won't cause any performance issues.
You can also look at other option of creating Global calculated key figures with exception aggregation "Last value" but for this, you need to include discount rate a part of the Info cube.
Hope this helps.
Cheers
Bala

Similar Messages

Create Badi for Virtual Key Figure

Hi experts,
i have to create badi for virtual key figure in BIW for dat i m creating Badi in BI development but its asking for Access Key.
Badi name is RSR_OLAP_BADI
i want to know while creating classic Badi with Implementation Name do developer need access key or thr any othr way to develop Badi for Virtual Key Figure.
Tell me for creating virtual key figure in biw we use Badi and for dat we have to create the Badi in BIW Dev. or in R/3 Dev.
it first time dat i m creating BAdi.
Ankit
Edited by: ankit375 on Feb 3, 2011 11:14 AM
Edited by: ankit375 on Feb 3, 2011 11:14 AM

To see how to create this BADI see here:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90b2babc-15ad-2d10-c4b2-bd3af67d86b1
You you need to be registered as developer (you have to have dev.key) to do the coding.

Do we write variable customer exits for virtual key figures in Bex?

Hi all,
Am I thinking the right here " We write variable customer exits in CMOD for virtual key figures in BEx " or am I totally wrong. If thats the case where do we write it.
Thanks,
JB

Nevermind

Type conflict with ASSIGN in BADI for Virtual Key Figures

We get the below error dump in ST22 when executing BEx queries that contain virtual key figures.
error message - 'Type conflict with ASSIGN in
program "ZCL_IM_THR_RSR_OLAP_BADI======CP".'
We have a BADI implementation that calculates few virtual key figures included in some infocubes & multiproviders. The error would arise if we execute two queries (containing common Virtual Key figures) one after the other without closing the first query.
We found a note "Note 1237689 - Virtual chars. and key figures in input-ready querys" that could be relevant to our issue and wanted to apply this note but unfortunately the note is only applicable to SAPKW70016 to SAPKW70018 and we are support pack 15.
Can you please advise what the problem could be/suggest corrections for the same.

Hi Kulmohan,
Did you fix your issue? We are facing the same issue. Could you please let me know if you have any solution for this issue,
Thank you,
Mike

Problems with creating badi implementation for virtual key figures

Hi,
I'm running BI 7.0 (unicode).
I have been trying to follow this blog to calculate the virtual keyfigure in my infoset - Using Virtual Key Figure and Characteris in an InfoSet
My infoset includes 1 infocube, and 3 master data infoobjects. I have created everything the blog was referring to, and activated fine. However, it seems that when the field symbols are assigned from the c_s_data structure, they do not get referenced correctly, so that no correct memory area is assigned and instead the whole c_s_data structure is assigned to the field symbol, which prevents me from referencing the right mem area correctly.
For example, in this statement
ASSIGN COMPONENT P_CHA_ZMYINFOSET___F120 OF STRUCTURE c_s_data
TO <fs_ZMYINFOSET___F120>.
the component p_cha_zmyinfoset___F120 of c_s_data supposed to be assigned to the field symbol (point to the correct place in structure c_s_data). In other words when this statement is executed, the program looks at structure c_s_data, finds the component zmyinfoset___F120 in it, and assignes the position of that component in the structure to the field symbol, so that it could be referenced in the code. However, the correct assignment does not happen.
When I debug the code and view the structure c_s_data, I can never find any component with any of the names I can find in my BEX query like ZMYINFOSET___F120. All I see are the components that are named like these: Z____5179 (C_S_DATA-Z____5179), C_S_DATA-S____5150, etc. I see the correct values, but components all have weired names like that. I thought in Infosets the components are named in the following fashion: INFOSETNAME___FXXX which you can see from your BEX query designer. Why is this happening? Why don't I see the correct names in the c_s_data structure? If instead I try to assign those components with their weired names directly, I still get incorrect assignment.
what am I doing wrong?
I was reading abap help on this statement: assign COMPONENT comp OF STRUCTURE struc
and the following I found:
With this expression for mem_area, the memory area of a component comp of a structure struc is assigned to the field symbol. While the structure struc is specified directly, a data object must be specified for comp. The evaluation depends on the data type of comp:
If the field comp has a non-text, elementary type, the content is converted to the type i and interpreted as a position of the component in the structure. if the value for comp is 0, the storage area of the entire structure is assigned to the field symbol.
From what it says above, my value for comp is always 0, so that the entire structure is always assigned to my field symbol instead of a specific position in that structure.
please let me know what is wrong here.
thanks.
Edited by: AG on Oct 11, 2008 10:41 AM
Edited by: AG on Oct 11, 2008 10:42 AM

Hi,
I am facing the similar issue. Can you please tell me how you solved this problem in more details?
which sample code and how u can find that in SE24 and where to copy that code.
Thanks in advance..
vamsi.

Help needed for Virtual Key Figure BADI

I am trying to implement Virtual Key Figures via BADI.
Here is what I have done
Define Method
method IF_EX_RSR_OLAP_BADI~DEFINE.
DATA: l_s_chanm TYPE rrke_s_chanm,
l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
<l_s_chanm> TYPE rrke_s_chanm.
Insert Code
CASE i_s_rkb1d-infocube.
WHEN 'ZMCOPA_02'.
l_s_chanm-chanm = '0CUSTOMER'.
l_s_chanm-mode = rrke_c_mode-read.
APPEND l_s_chanm TO c_t_chanm.
APPEND 'ZCPRC_FLG' TO c_t_kyfnm.
APPEND 'ZRTNS_PRC' TO c_t_kyfnm.
ENDCASE.
ENDMETHOD. "if_ex_rsr_olap_badi~define
Compute Method
method IF_EX_RSR_OLAP_BADI~COMPUTE.
FIELD-SYMBOLS <fs_ZRTNS_PRC> TYPE ANY.
FIELD-SYMBOLS <fs_ZCPRC_FLG> TYPE ANY.
FIELD-SYMBOLS <fs_0customer> TYPE ANY.
DATA: l_zv_20dv TYPE curr09.
ASSIGN COMPONENT p_kyf_ZRTNS_PRC OF STRUCTURE c_s_data
TO <fs_ZCPRC_FLG>.
ASSIGN COMPONENT p_kyf_ZCPRC_FLG OF STRUCTURE c_s_data
TO <fs_ZCPRC_FLG>.
ASSIGN COMPONENT p_cha_0customer OF STRUCTURE c_s_data
TO <fs_0customer>.
DATA: l_zrtns_prc TYPE /bic/pzcust_prc-/BIC/ZRTNS_PRC.
DATA: lt_zcust_prc TYPE TABLE OF /bic/pzcust_prc.
DATA: ls_zcust_prc TYPE /bic/pzcust_prc.
IF NOT p_cha_0customer IS INITIAL.
<fs_0customer> =
ENDIF.
SELECT SINGLE *
INTO ls_zcust_prc
FROM /bic/pzcust_prc
WHERE /bic/zcust_prc = <fs_0customer>.
IF sy-subrc = 0.
<fs_ZCPRC_FLG> = 1.
<fs_ZRTNS_PRC> = ls_zcust_prc-/BIC/ZRTNS_PRC.
ELSE.
<fs_ZCPRC_FLG> = 0.
<fs_ZRTNS_PRC> = 0.
ENDIF.
endmethod.
I have commented out line in the Compute method because I was getting an error on my SELECT statement. I think the error is due to the fact that <fs_0customer> is not being populated.
In debug mode, p_kyf_ZRTNS_PRC, p_kyf_ZCPRC_FLG and p_cha_0customer all return 0. Shouldn't they have a different value. I have to admit that I don't really understand how ASSIGN COMPONENT works.
I have defined p_kyf_ZRTNS_PRC, p_kyf_ZCPRC_FLG and p_cha_0customer in the Attribute tab.
Any help would be appreciated. I have spent several hours trying to figure out how this works.
Thanks.
Ryan

Check this if it helps:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c

Creating BADI for Virtual Key fig: Error: RSR_OLAP_BADI does not exist

Hi,
I am following some instructions to test the implementation of virtual key figure and came to the point to create the BADI.
Intructions on page 5:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c
SE19
Create Implementation; New BADI; Enhancement Spot:    RSR_OLAP_BADI
At this point I get an error that RSR_OLAP_BADI does not exist.
I then chose at random APB_LAUNCHPAD but this works in the sense that it took me to the next screen
1. What does it mean by RSR_OLAP_BADI not existing?
2. I know the instructions points to choose RSR_OLAP_BADI, but why that particular program and how does one gets to know that it is the one to use for virtual key figure/char implementation?
3. When I tested with APB_LAUNCHPAD, I did not get the same screen on page 5 of the link, is it different for BI 7? Or, am I missing a point?
Thanks

Hi,
thanks for the guidance.
Yes, I tried to implement exactly as in the article.
Yes, I defined the filter for the Infoprovider, as ZV*
Are you suggesting that at this point, if in the method if_ex_rsr_olap_badi~define, I change the value of
"ZV_ZIPER" to my DSO or Cube, I should now see the virtual key figure in my query?
Based on this understanding, I modified the method as follows, (my cube name is 2LIS_11_VASCL):
method IF_EX_RSR_OLAP_BADI~DEFINE.
DATA: l_s_chanm TYPE rrke_s_chanm,
l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
<l_s_chanm> TYPE rrke_s_chanm.
Insert Code
CASE i_s_rkb1d-infocube.
CASE i_s_rkb1d-2LIS_11_VASCL.
      WHEN '2LIS_11_VASCL'.
      l_s_chanm-chanm = 'ZVAR_SHPR'.
      l_s_chanm-mode = rrke_c_mode-read.
      APPEND l_s_chanm TO c_t_chanm.
      l_s_chanm-chanm = 'ZVARDT'.
      l_s_chanm-mode = rrke_c_mode-read.
      APPEND l_s_chanm TO c_t_chanm.
      APPEND 'ZV_20DV' TO c_t_kyfnm.
ENDCASE.
endmethod. "if_ex_rsr_olap_badi~define
After activation, I checked the query and still I am not seeing the virtual key figure in the query for selection.
Any more ideas?
Thanks
Edited by: Amanda Baah on May 24, 2009 8:01 AM

Virtual key figure BADI - does not change value

I wrote a badi for virtual key figure according to guidelines from an SDN doc on how to create virtual chars and kf's.
However, the value of the key figure is not changed at all. Below is my code. Please see what I'm doing wrong
method IF_EX_RSR_OLAP_BADI~DEFINE.
   APPEND 'ZRANKS' TO c_t_kyfnm.
endmethod.
method IF_EX_RSR_OLAP_BADI~COMPUTE.
if P_KYF_ZRANKS > 0.
    assign component p_kyf_zranks of structure c_s_data
    to <fs_ranks>.
    <fs_ranks> = '1.0'.
endif.
endmethod.

There is something you need to do which I have not seen described in any of the documention here.
You need to copy the source code for the INITIALIZE method directly from the code given in the example class CL_EXM_IM_RSR_OLAP_BAPI. That is where the P_KYF<object> and P_CHA<object> attributes are assigned their values. If you do not copy this code into your own implementation, these attributes have no value in the COMPUTE method and your code will probably not work.
Bryan

BW : Virtual key figures

Hii experts ,
What are virtual key figures .
Plz explain .
Thanks & regards ,
Madhavi S Bichakal

Dear Madhavi,
Virtual Key figure
virtual key figures are key figures within an InfoProvider that are not filled with data. Instead the key figure value is determined at runtime of the query using custom ABAP coding .
this keyfigure is not populated with the data by using update rules. but this virtual keyfigures will detemine the value only at the runtime of the query.
nomally when we store the key figure value in the cube as we do it for a normnal keyfigure it gives us the fact(Fixed truth ) information but by using virtual keyfigures we can show the present truth in the report.
for example :- let say we have a transaction on 01/01/2007 for material M100 @ price of 100 and on 02/01/2007 the price of material M100 has changed to 200.
when we store price as a normal keyfigure in the cube it will give fact i.e, 100
but if we design the price as a virtual keyfigure it will give out present truth as 200.
Virtual characteristics and Key figures are useful if you want to dynamically pouplate data from the fact table to the field which doesn't have any data in the fact table and also used to build an internal security model before the data gets passed to DATA_PROVIDER.
You can get more information if you review the documentation for enhancement RSR00002.Go to SMOD type in RSR00002 and select the documentation radiobutton..
Some ABAB coding samples:
Virtual Characterstics & Key Figures
Virtual Characteristic problem
how to read characteristic variable value into virtual characteristic
How to implement Virtual Characteristics or Virtual key figures
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5#search=%22SAP%20Customer%20Exit%20virtual%20key%20figure%22
For more info
You can go through the following links.
Virtual Key Figures
sampel code for virtual key figures
Virtual Key Figure - ZXRSRU02
Virtual Keyfigures and Characterisitics
How to implement Virtual Characteristics or Virtual key figures
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20use%20variable%20time%20references%20in%20currency%20conversion
Search for the keyword virtual keyfigure in the following link :
https://www.sdn.sap.com/sdn/developerareas/bi.sdn?page=BW_How_To.htm
Creating Virtual keyfigures
you create virtual keyfigure just like create normal keyfigure (RSD2),
populate not via transformation/transfer/update rules, but when query execution via user exit, take a look
Virtual Characteristic problem
virtual key figure
http://www.bwexpertonline.com/downloads/Nissen.doc
Also
How to implement Virtual Characteristics or Virtual key figures
Check post by Sree Rama Tata
Hope it helps
Regards
Bala

Virtual Key figure not getting populated

Hi All,
I have included a virtual key figure in a multiprovider on which the query is created and its underlying ODS.
This issue is the virtual key figure is not getting populated . I am not sure what I am missing
I did the following :
1) Tried Debugging - Put a break point and execute the query in RSRT.It did not go to the Exit. I also tried generating the query from RSRT.
I am using the BADI (RSR_OLAP_BADI) to populate the Vir Key Fig.
Please guide me.
Thanks,
HM

Hi All,
Now that I am able to get the logic to come up in debug. I am faced with another issue.
I am implementing avery simple logic . I added a integer type key figure to the ODS and I am tryin to assign value 1 to the the key figure in the code (I am assigning 1 just ot check if the value is passed to query or not. I do have acomplex logic tha i need to implement).
Here I am able ot see the value in the debug but in the qury the value is not populated.
N ot sure what might be going wrong.
code is
l_z_avg = 1.
<fs_zavglate> = l_z_avg .
Appreciate help.
Thanks,
HM

BADI for populating virtual Key Figure : Exception Occurs

Hello,
I am using BADI for populating virtual Key Figure.
Since my info provider in a Cube , query is built on it with addition to Virtual Key figure.
I have used select statement for retrieving data from cube as input for the variables in BADI.
But after debugging it , it stop or exception occurs at the select statement.
Need help for the same.
My code : Cube name : ZGMR_C01
DEFINE ******
method IF_EX_RSR_OLAP_BADI~DEFINE.
DATA: l_s_chanm TYPE rrke_s_chanm,
l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
<l_s_chanm> TYPE rrke_s_chanm.
Insert Code
CASE i_s_rkb1d-infocube.
    WHEN 'ZGMR_C01'.
      l_s_chanm-chanm = 'ZEC_PLOAD'.
      l_s_chanm-mode = rrke_c_mode-read.
      APPEND l_s_chanm TO c_t_chanm.
      l_s_chanm-chanm = 'ZCOM_BLM'.
      l_s_chanm-mode = rrke_c_mode-read.
      APPEND l_s_chanm TO c_t_chanm.
      APPEND 'ZVKF_TTBL' TO c_t_kyfnm.
ENDCASE.
endmethod.
DEFINE ******
COMPUTE *****
method IF_EX_RSR_OLAP_BADI~COMPUTE.
FIELD-SYMBOLS <fs_ZVKF_TTBL> TYPE ANY.   -
Virtual Key Figure
FIELD-SYMBOLS <fs_ZEC_PLOAD> TYPE ANY. -
Variable 1
FIELD-SYMBOLS <fs_ZCOM_BLM> TYPE ANY.   -
Variable 2
DATA: l_ZVKF_TTBL TYPE /BIC/OIZVKF_TTBL.
TYPES : BEGIN OF TY_ITAB,
PLOAD TYPE /BIC/OIZEC_PLOAD,
BLMONTH TYPE /BIC/OIZCOM_BLM,
TOTBL TYPE /BIC/OIZKF_TOTBL,
END OF TY_ITAB.
data: IT_ITAB TYPE STANDARD TABLE OF TY_ITAB,
      WA_ITAB type TY_ITAB.
data: IT_ITAB1 TYPE STANDARD TABLE OF TY_ITAB,
      WA_ITAB1 type TY_ITAB.
ASSIGN COMPONENT P_KYF_ZVIR_TOT OF STRUCTURE c_s_data
TO <fs_ZVKF_TTBL>.
ASSIGN COMPONENT P_CHA_ZVIR_POL OF STRUCTURE c_s_data
TO <fs_ZEC_PLOAD>.
ASSIGN COMPONENT P_CHA_ZVIR_MON OF STRUCTURE c_s_data
TO <fs_ZCOM_BLM>.
break-point id z_routines.
SELECT /BIC/DZGMR_C011SID_ZEC_PLOAD /BIC/DZGMR_C01TSID_0CALMONTH /BIC/VZGMR_C01F~/BIC/ZKF_TOTBL
FROM /BIC/VZGMR_C01F
INNER JOIN /BIC/DZGMR_C011 ON /BIC/VZGMR_C01FKEY_ZGMR_C011 = /BIC/DZGMR_C011DIMID
INNER JOIN /BIC/DZGMR_C01T ON /BIC/VZGMR_C01FKEY_ZGMR_C01T = /BIC/DZGMR_C01TDIMID
INTO TABLE IT_ITAB
WHERE /BIC/DZGMR_C011~SID_ZEC_PLOAD = <fs_ZEC_PLOAD>
AND /BIC/DZGMR_C01T~SID_0CALMONTH = <fs_ZCOM_BLM>.
break-point id z_routines.
LOOP AT IT_ITAB INTO WA_ITAB.
WA_ITAB1-PLOAD = WA_ITAB-PLOAD.
WA_ITAB1-BLMONTH = WA_ITAB-BLMONTH.
WA_ITAB1-TOTBL = WA_ITAB-TOTBL.
COLLECT WA_ITAB1 INTO IT_ITAB1.
CLEAR : WA_ITAB1 , WA_ITAB.
ENDLOOP.
break-point id z_routines.
IF sy-subrc EQ 0.
<fs_ZVKF_TTBL> = WA_ITAB1-TOTBL.
endif.
endmethod.
COMPUTE *****

Exception :
Exception CX_SY_NO_HANDLER triggered
An exception with the type CX_SY_OPEN_SQL_DB occured, but was not handled
This comes when i debug the BADI.

Virtual Key Figure

Hi all,
Before implementing a virtual key figure, I'd like to make sure this will answer my need. I work for a brewery, and I am looking at our customer taps activity.
Records in the cube:
Trading Region A, Brand X, Customer 001, Action "Install": 1 "Tap action"
Trading Region A, Brand X, Customer 002, Action "Install": 2 "Tap action" (<i>new taps</i>)
Trading Region A, Brand X, Customer 002, Action "Removal": 1 "Tap action" (<i>old tap</i>)
So what I want to have in my report is :
Trading Region A Brand X: 2 "customer activity"
I am thinking I could use a virtual key figure that will look in the cube and check if there was any activity for a customer on that brand and trading region, and then will allow me to aggregate the result in the query.
But I am not sure because it seems to me that Virtual Key Figure are calculated at record level...
Could any of you clarify this for me ?
Many thanks for your help,
Nicolas

Thanks a lot !
I don't know why I tried such a complicated solution...
Tried to assign points and close the issue, let me know if it didn't work as this is my first post...

Virtual Key Figures - Field Symbol

Dear guru's,
We had obtained an ABAP error in the execution of a query when obtaining a virtual key figure. We analyzed the problem and identified the error. We fixed it in our dev system and tested ok.We then transported the includes ZXRSRU02, ZXRSRTOP, ZXRSRZZZ to our quality system and the problem persisted. The error occurs because the structure c_s_data has not updated to include the added object and therefore assigns the structure to the field symbol and not its value.
I have checked the versions of these includes and they are identical. What could be the possible causes for this problem and solutions?
Thanks and Kind Regards,
Alex

We transfered many times the corrected code and still the probem persisted. If my understanding is correct the structure c_s_data is created by BW according to the appends you make in the code (...RU02).
The problem was resolved when we regenrated the queries. If anyone can explain why this is so, please let me know so that I may have a better understanding of this process.
Thanks and Kind Regards,
Alex

Using Virtual Key Figures/ Characteristics is possible to use in InfoSets

Hi All,
Is it possible Using Virtual Key Figures/ Characteristics is possible to use in InfoSets?
I have tried all the possibilities using the BADI implementation RSR_OLAP_BADI without success.
The VKF / Characteristics works fine when it is being used with a query based on the ODS however it is not populated when i am using the infoset. Moreover i have used the code for InfoSet as well it is not working.
I would appreciate any help in this regard.
Regards
Noor

Hi PV,
r u sure about that, as i have tried all sort of permutation and combinations for using the same in RSR_OLAP_BADI without any luck.
I have the got felling about the same however if you look into the following SAP note it puts me into doubt.
Note 657690 - Virtual characteristics and key figures in InfoSets
Note 618738 - Virtual characteristics or key figures and InfoSets.
It describe about using the RSR00002.
Many thanks for the information.
Kind Regards
Noor

Virtual Key Figure ( Currency Problem)

Hi All,
I am facing one problem in virtual key figure using BADI. Need your help...
Scenario: I have a DSO with all many fields. Requirement is to add one more VKF in DSO to get specific period balance of a GL from 0FIGL_O10 DSO and then display it as a column in Bex report. Added VKF is of type amount and unit/currency 0CURRENCY.
Required Report Format:
Material --- Col1 u2013 Col2 u2013 Col3(VKF)
M1--$4, 00-$140, 00u2014<Balance form 0FIGL_O10 for a period>
Work done so far:
I have added a virtual key figure ZVKF_BAL in my ZSD_O06 of type amount unit/currency as 0CURRENCY. In RSR_OLAP_BADI I have added a new implementation ZVAR_IMPL.
In class ZCL_IM_VAR_IMPL there are total three attributes.
P_KYF_ZVKF_GL u2013 Virtual key figure
P_CHA_0FISCPER u2013 Period is from ZSD_O06 for which we have to get the balance of a fixed GL account from 0FIGL_O10.
Given is the code added in define method:
DATA: l_s_chanm TYPE rrke_s_chanm,
        l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
        <l_s_chanm> TYPE rrke_s_chanm.
CASE i_s_rkb1d-infocube.
WHEN 'ZSD_O06'.
    l_s_chanm-chanm = '0FISCPER'.
    l_s_chanm-mode = rrke_c_mode-read.
    APPEND l_s_chanm TO c_t_chanm.
    APPEND 'ZVKF_GL' TO c_t_kyfnm.
ENDCASE.
No code added in initialize method
Given is the code added in compute method:
FIELD-SYMBOLS <fs_ZVKF_GL> TYPE ANY.
FIELD-SYMBOLS <fs_0FISCPER> TYPE ANY.
DATA :LV_FS_ZVKF_GL TYPE /BI0/OIBALANCE,
p_cha_0FISCPER = 8. "ASSINGING POSITIONS TO THE FIELD AS THEY ARE NOT GETTING IT
p_kyf_ZVKF_GL = 16.
ASSIGN COMPONENT p_kyf_ZVKF_GL OF STRUCTURE c_s_data
            TO <fs_ZVKF_GL> .
ASSIGN COMPONENT p_cha_0FISCPER OF STRUCTURE c_s_data
            TO <fs_0FISCPER>.
Customized function module which will calculate the GL Balance.
CALL FUNCTION 'ZGLBALANCE'
    EXPORTING
     FISCPER_I    = <fs_0FISCPER>
     GL_ACCOUNT_I = '0000476000'
    IMPORTING
      BALANCE_O    = LV_FS_ZVKF_GL.
<fs_ZVKF_GL> = LV_FS_ZVKF_GL.
Code of ZGLBALANCE:
DATA: lv0_fiscal type /BI0/OIFISCPER.
DATA : X TYPE I VALUE 0,
types: BEGIN OF ty_/BI0/AFIGL_O1000,
       FISCPER type /BI0/OIFISCPER,
       GL_ACCOUNT type /BI0/OIGL_ACCOUNT,
       BALANCE type /BI0/OIBALANCE,
       CURRENCY TYPE /BI0/OICURRENCY,
        END OF ty_/BI0/AFIGL_O1000.
data: it_/BI0/AFIGL_O1000 type TABLE OF ty_/BI0/AFIGL_O1000, " Internal table
      wa_/BI0/AFIGL_O1000 type ty_/BI0/AFIGL_O1000.          " Work area
select single FISCPER GL_ACCOUNT BALANCE CURRENCY from /BI0/AFIGL_O1000 into CORRESPONDING FIELDS OF TABLE it_/BI0/AFIGL_O1000 where GL_ACCOUNT eq GL_ACCOUNT_I and FISCPER eq FISCPER_I and CURRENCY = 'USD'.
BALANCE_O = X .
Problem:
We are getting the balance values but it is coming with numeral with postfix ERROR.
M1--$4, 00-$140, 00u201412,00 ERROR
M2--$24, 00-$130, 00u201414,00 ERROR
Is it something to do with currency? Please let us know what is worng in code?
If yes please let me know how to get the currency along with the numeric values there in the report.
Thanks & Regards,
Mayank

Hello mayankmishra135,
Were you able to find a solution for this? I am facing the same issue (with the ERROR in the currency field), wuold appreciate your help.
Best regards,
Aleksander Dyl

Is this a candidate for virtual key figure ?

Similar Messages

Maybe you are looking for