Is this a good machine that i purcahse

http://www.ebay.com/itm/121183498776?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m143 9.l2649

Update.
Actually,
This iMac is a DV iMac with CD writing DVD ROM optical drive.
It's a little better model, but still not spectacular.
400 MHz CPU, can hold 1 GB of RAM and has a 10 Gb hard drive.
This model can run OS X 10.4 Tiger.
I bet still not great, but run better than on a 233 MHz CPU.
I wouldn't downgrade the OS because OS X 10.4 Tiger, while still old, can still access some of the more modern Internet with the help of more RAM installed and use of different web browsers some other substitute software.
10.3 Panther is just too old and too far back and there is virtually no more support and limited Intenet access on that version of OS X.

Similar Messages

HT1386 How many different computers can I sync my iPod with? My laptop crashed and was completely wiped clean and this was the machine that my iPod synced with so I don't know if it will be counted as a "new" computer.

How many different computers can I sync my iPod with? My laptop crashed and was completely wiped clean and this was the machine that my iPod synced with so I don't know if it will be counted as a "new" computer when I sync my iPod.

You can sync with onee at a time. Syncing to another will erase the current content.
Copy everything from your backup copy of your old computer to your new one.

I created an application on a machine with Labview 6.01, can I run this application on another machine that has labview 5?

In the development center we use Labview 6.01, in the testcenter we use labview 5.
Additionally, in the development center we use a unix version of Labview and in the testcenter a Windows version.

You can Save with Option to save VIs as version 5.
Unless your VIs deal with system files in UNIX or Windows (ie. Registry...)
then you have to develop your VI specificly on that OS, since UNIX and
Windows have different ways to deal with system files. Mostly, LabVIEW is OS
independent. I used to have VIs developed from LabVIEW v.3 on UNIX, I can
still open these files from LV v.4 on Windows. Now I can still work with
these VIs on LV 6 on Windows.
Good luck,
Nam.
roybra wrote in message
news:[email protected]..
> I created an application on a machine with Labview 6.01, can I run
> this application on another machine that has labview 5?
>
> In the development center we use Labview 6.01, in the testcenter we
> use l
abview 5.
>
> Additionally, in the development center we use a unix version of
> Labview and in the testcenter a Windows version.

I was surfing the web and got tricked into downloading MacProtector. It says my system is infected!! Of course they want almost $80 to register the copy that is on my laptop. Is this a good product?? Should I get something else, like Norton antivirus?

I was surfing the web and got tricked into downloading MacProtector. It says my system is infected! Of course they want almost $80 to register the program so I can then use it to clean up my machine. Is this a good program?? Should I get something like Norton antivirus instead??

Yes, turning off Javascript works, but turning it on and off is a pain if one has to make a trip to the preferences.
Why many recommend the NoScript Add-on as one can drag a "allow" button to Firefox's toolbar and turn on scripts on a site per site, case per case basis.
NoScript also protects against other web nasties, like Clear click jacking and zillions of other web based trickery.
http://noscript.net/changelog
Apple Support Forums works fine without Javascript running, I do it all the time, it also supports HTTPS encrpytion too.
It might be that I'm not seeing a lot with Javascript and other things turned off, but the post box functions etc. work just fine.
Maybe Apple is heading towards no scripts running on all their products?
First Flash gets the axe, then Java is coming next and perhaps finally Javascript? hmmmm?
Smart move possibly.
Nope it's the same with it on or off.

The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component 'GUID′ in search application 'Search Service Application' is in a good state and try again.

Another post with a well-known title. Believe me, I know. Here's my setup;
- 1 Server 2012 WFE, SharePoint Server 2013, totally up-to-date, including the september 2014 hotfix
- 1 Server 2012 DB, SQL Server 2012
Installed SP 2013 using PowerShell, with the AutoSPinstaller. Worked like a charm. Got everything up and running, with some tweaking here and there to customize it to fit my situation. Now, I can't get the Search Service Application to work. Must have created,
deleted and recreated it at least 30 times. Used both PowerShell scripts, PowerShell line-by-line, Central Admin, heck, I even went so far as to use the configuration wizzard... No luck. I keep on getting the message that search cannot connect to the machine
that hosts the 'administration component'.
In order to avoid answers that suggest all the things I've already tried, here's a summary of the various scenarios I followed:
Tried both a dedicated application pool as well as the SharePoint Web Services Default
Timer job job-application-server-admin-service is running and not showing errors
IIS 8.0 is installed, so is .NET 4.5 (not the known perp of IIS 7.5 and .NET 4.0)
the get-SPEnterpriseSearchServiceInstance -local returns a healthy, online state
the SPEnterpriseSearchQueryAndSiteSettingsServiceInstance is also running
FireWall is disabled; registry has the BackConnectionHostNames modified with the necessary FQDNs
Accounts used to install and / or run the serviceapp all have sufficient rights - tried a dedicated managed account, SP_2013_SearchSvc, the SP admin account, and even the original Farm account; all to no avail, I keep on getting the error message.
Even tried stsadm to start the server search running - NOTHING WORKS!!!
As you might understand, this is driving me nuts. About to miss my second deadline, and no amount of IISresetting is making this go away. Been stuck on this issue for far too long, now (my searching is measured in days and weeks instead of hours, by now).
Whoever helps me solve this - you will have my eternal gratitude, and a nice bottle of Prosecco. Or whatever's your poison. You need to come get it, though. I´m situated in the Netherlands. Hey, you always meant to visit Amsterdam and see for yourself, right?
Thanks, community, for coming to my rescue!

Thanks again - Alas, I've been there. Deleted Search a dozen times, at least, and tried installing it, initially using a PowerShell script (tried several scripts actually, from full-blown total Search Applications with extensive topologies to the most basic
of basics 'please just start without showing me errors'), PowerShell line-by-line to see where things went South, next tried installing through Central Admin (hoping that it was my own stupidity in overlooking things and hoping The System would get it right
for me), and eventually even tried using the config wizzard as a total and utter last resort - Nothing worked.
At first, I found out that removing a Service App needs a *little* bit more work than simply removing it through Central Admin, but by now I can truthfully state that if there's one thing I've become supergood at, it's removing Search Service Applications.Totally.
I will check out the article, though - I realized early on in my SharePoint experience that regardless of what you think you know, there's so much more to find out. I know, that's almost philosophical. That is, my friends, indeed the point I've reached...

How do I delete folders listed in Time Machine that are no longer good?

I AM TRYING TO DELETE FOLDERS ON MY TIME MACHINE THAT I NO LONGER NEED:
MY TIME MACHINE FOLDER SHOWS AT PRESENT:
DIGI FILES_PE
DIGI FILES-PE-ACDS
DIGI-ACDS
HARD DRIVE
IPHOTO-PHOTO-PREV-PE
PREV-ELEMENTS
WORKING
I WANT TO DELETE:
PREV-ELEMENTS
DIGI FILES_PE
DIGI FILES-PE-ACDS
When I checked the Help INstructions it tell me to Highlight the file and click the Actions menu (Gear icon) from the toolbar.
Select “Delete all backups of <this file>”.
BUT...when I do that the Gear icon only shows "Move to Trash" Not “Delete all backups of <this file>”.
So when I try to move the old folders to the trash it tells me that the operation cannot be done?

See Pondini's TM FAQs for starters.

I've recently received an error message from Time Machine that my Macbook Pro's sparsebundle is in use. What is this and what can I do about it?

I've recently received an error message from Time Machine that my Macbook Pro's sparsebundle is in use. What is this and what can I do about it?

This is asked at least 5-6 times a day here.
Look at the right hand column.. more like this.
It is a bug in Mountain Lion.
Read C12 http://pondini.org/TM/Troubleshooting.html
But the fast solution.. unplug the TC.. count to 10.. plug it back in.

Good morning, my photoshop stopped working, it gives error when started, what can it be? This is the message that appears: Unable to start the program it took a unexpected end of file I hope answer

Good morning, my photoshop stopped working, it gives error when started, what can it be?
This is the message that appears:
Unable to start the program it took a unexpected end of file
I hope answer

Could not initialize Photoshop because an unexpected end-of-file was encountered. | Mylenium's Error Code Database
Mylenium

Hi, My OS X is Leopard v10.5.8, w/Safari v5.0.6. I am considering downloading ClickToFlash 2.9.2 for general security reasons. I'm assuming this a good fit, being that Apple endorses this extension on their site. Does this mean i can download it w/out hav

Hi, My OS X is Leopard v10.5.8, w/Safari v5.0.6. I am considering downloading ClickToFlash 2.9.2 for general security reasons. I’m assuming this a good fit, being that Apple endorses this extension on their site. Does this mean i can download it w/out having to worry about any conflicts?,.. that its coming from a safe source, etc? Does it have any downsides? Is it easy to install?, ..or uninstall if i dont like it?
ALSO~ I’m assuming i dont need ClickToPlugin, because when on internet i always have “Enable Plugins” ~ DISABLED.
Thanks for any advice,... Jean in NJ

I dont really understand~ When i open my Flash Player pane, click on Advanced tab, the heading "Updates" reads~ "Not updating may leave this computer vulnerable to security threats." The reason for my concern is that Adobe no longer offers FP updates for my OS [10.5.8],not even archived. So my original question probably should have read~ When visiting a web site does Flash automatically load onto safari. If so, can using Click to Flash;... and NOT clicking to flash, prevent Flash from loading, and possibly carrying a "security threat" [virus?], into Safari or my Mac? Not trying to beat a dead horse,..just trying to understand what makes him run, Thanks

I HAVE A MAC NETWORK WITH A HP LASER-JET AND EVERYTHING IS WORKING FINE. I ALSO HAVE A WINDOWS BASED MACHINE THAT I WOULD LIKE TO PRINT TO AS WELL. HOW CAN I ACCOMPLISH THIS?

I HAVE A MAC NETWORK WITH A HP1200 LASER-JET AND EVERYTHING IS WORKING FINE. THE PRINTER IS CONNECTED DIRECTLY WITH ONE OF MY MAC-MINI"S. I NOW HAVE A WINDOWS BASED PC AND WOULD LIKE TO PRINT TO IT AS WELL.. HOW CAN I DO THIS?

Make sure that you Printer Sharing enabled on the Mac Mini. System Preferences > Sharing > Printer Sharing
Do the same on the PC
On the PC, try downloading and installing Bonjour Print Services for Windows v2.0.2
Run the application on the PC to see if it will discover your printer and install the printer.

Extremely poor performance on good machine (dual xeon, Revodrive, SLI etc.)

Hello,
I've looked for answer, read all the articles about making better performance of PS and I still can't solve the problem... I even tried Photoshop CC and the performance was... worse. I measured time it took to open some files or make some of my actions.
Programs performance is so incredible bad, it's not even annoying it is some disaster... sometimes I have to wait more than 10 seconds for response when I'm moving a layer or few seconds when applying some very simple transformations to smart object (logo etc.). I spent a lot of money on my workstation hoping it will work smooth and fine, and it seems that it is working worse than my old machine for 1/10 of its price. I hoped that moving to Cloud will solve the problem and the new software understands better new hardware I own, but NO! as I mentioned it is working even slower.
The problem only affects Photoshop and Illustrator, After Effects run perfectly fast... but I work mostly on Photoshop and Illustrator. Most of the time both programs are opened.
Some more hardware details of my workstation:
Dual Xeon 2630 @ 2.3 GHz
32 GB Ram
System Drive: PCI-E Revodrive 3 x2 240 GB
Storage Drive: 3GB WD
Graphic Card: 2x GF GTX 680 in SLI (2GB memory each)
System: Windows 8.1 Pro 64-bit
Adobe Suite CS 6 Master
I keep to all advices from "Photoshop performance" articles. I tried another SSD drive as scratch drive, all drivers are up to date, system is "fresh installed" without any garbage...
I'll really apreciate any good advice that could help me solve the problem, so I'll be able to work normal. Without lost hours on waiting for the simpliest actions.

I just to reinstalled drivers and NOTHING... (Latest nVidia drivers clean install)... I also looked on my resources manager and after few munutes photoshop easly uses more than 50% of avaiable RAM... when I'M working procesor usage is about 5-9% (12% was maximum) and when I run also Adobe Illustrator memory usage goes above 60% but cpu usage is still low (5-7%). I have 32GB of memory... PSD file I work on is 750MB... Maybe there is some issue with my memory, buffer or something like this? Any idea?
When I copy 1920x1080px layer from one program to the other it takes few minutes, and sometimes programes crush... even if I'm not working the memory usage is now above 60% - shouldn't it go down?
oth Photoshop and files I work on are on the same drive (PCI-E SSD OCZ RevoDrive 3x2 - so it shoulb be super-fast...).
Sorry for bad spellings - I'm so angry now!!!
HELP PLEASE!

Has Snow Leopard made this so good, I don't have to do it?

Hi,
I have a MacBook Pro 2.66 running the latest FCPro and Snowie. I also have "Menu Meters" up in the menu bar. I've noticed when editing in FCPro 7 (7.01) and I render scenes, sometimes menu Meters (both of them) show 75 - 90% of the processors are busy working . . . rendering!
GOOD! That's what their supposed to do. But sometimes, and I can't find the pattern here . . . I'll render something and the processors are only working at 30%. I'm wondering . . . 'why don't you 2 work a little harder so this'll render faster?!!" I do have monimal programs running in the background, MAIL, maybe Preview, QT - that's it. Nothing major to distract the rendering "bosses"!
I have not played with QMaster on the MacBook Pro as I read somewhere that with "only" 2 processors, it won't do anything with a MacBook Pro.
So I guess my question is . . . why does the rendering processes frequently change so much- using more or less of my processors? Can QMaster (if I know how to set it up, which I don't really) "order" the rendering machine to work 'harder' and faster? (At the downside of multitasking slower, which I don't care about, because I'm not doing it anyway.)
OR . . . is Snowie very intelligent about my FCPro program and does Snowie "intelligently" automatically control the processors to run at their max and I should do nothing? I wish this were right, but then why do menu meters show such varied performance?
Lastly, I have a Mac Pro Tower 8 core 2.8 gig also. I've tried playing with Qmaster on that one - it's menu meters show the same "varied" performance levels - but nothing I do with Qmaster predictable effects its "use" or "control" of rendering or compressing - it seems Snowie just seems to most of the time keep them at 60% or higher. (But I really don't know what I'm doing . . . so I might be setting QMaster all wrong! I seem to lay off it now)
Is Snow Leopard doing such a good job controlling performance, I should keep my hands "OFF" and just let everything run automatically? It seems sometimes in compressor, while compressing . . . it runs all 8 cores at 75% or so much of the time - but sometimes not!
Some of the articles I're read on QMaster are dated before Snowie, so can I rely on those stories? Or have things change now.
Thanks - I always learn a lot from these chat boards, and I'm sure I'm not the only one who's wondered about this. (I hope!)
Thank you,
Larry

See:
*http://kb.mozillazine.org/Preferences_not_saved

I would like to upgrade my OS to the latest version. I now have 10.6.8 and my machine has 1Gb of memory. Need 2Gb for the new OS. Is is possible (and practical) to add memory to a machine that's five years old?

I would like to upgrade my OS to the latest version. I now have 10.6.8 and my machine has 1Gb of memory. Need 2Gb for the new OS. Is is possible (and practical) to add memory to a machine that's five years old?

You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
http://en.wikipedia.org/wiki/3_GB_barrier
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
You can buy Lion for $29 from the App Store witht a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.
These are good online stores for Mac compatible RAM
OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.
Here are instructions on replacing RAM in a MacBook with a removable battery. http://homeoffice.consumerelectronicsnet.com/articles/viewarticle.jsp?id=44404
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

Help me...does this look good?!?!?

Hey all,
I want a G4 to use in my music studio, have found one on ebay, does this look good to you...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8792713494&rd=1&sspagename= STRK%3AMEWA%3AIT&rd=1
If you can't access that, basically it's this...
Computer is in excellent condition, has been well loved and well upgraded:- 200GB hard disk (5400rpm) Dual 867 MHz, 1MB L3 cache per processor 1.25GB DDR SDRAM 16x DVD+/- RW (Superdrive) 4x DVD+ RW (original Superdrive) 4x USB 2.0 ports 2x USB 1.0 ports 2x Firewire ports Airport Card (WiFi) Ethernet Card 56kbps Modem Digital in/out for audio Again it is in excellent condition, well loved.
Oh and there is still 2 slots left for memory upgrade and 4 other slots for your other upgrades, i.e. more firewire, usb, graphics card, music adaptors etc. I used the machine mostly for video editing and graphic design and it handles everything I throw at it. It is a beast of a computer but sadly by job entails I have a laptop now I will also include all the software that comes with it.
Think it sounds good? What price do you reckon???
Thank you!
Olivia x
G4 I hope

If you do decide to bid I'd keep in mind that it's the base model MDD G4 with a 133MHz system bus (the others had 167MHz). It's also one of the original models that got the nickname of wind tunnel as they could be fairly noisy, so much so that Apple under went a power supply replacement program using quieter fans, which may be an issue if it's intended for audio use. I'm not sure whether it's had the power supply replaced, but Verax also offered a noise reduction kit, which may give some indication of how noisy it can be.
I'm not trying to put you off though, but I'd keep the above in mind if you do intend to place a bid.

When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

When I listen to music on my iPhone and pause it, if I come back to it later, the playlist has started over. I have a 4S running on iOS 7.0.4. Is there any way to keep this from happening so that my playlist will start off where I last was?

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Is this a good machine that i purcahse

Similar Messages

Maybe you are looking for