Is this a gradual systems failure?

Today I used my mighty mouse button to open dashboard but to my surprise all my stickies were blank, the calculator wouldn't work and the calendar was blank. I waited for a couple of minutes but it never came to life. I restarted my computer and when it came back up all my JPEGS in finder were opening in Adobe Illustrator. Not only were they opening in Illustrator, but when I told it to open in Preview, it said "Preview could not open that type of file". I also noticed that all my folders no longer had icons. Everything else does, just not the folders.
I installed Snow Leopard a month ago and things were running pretty well, just a little slower. I have verified the disk in disk utilities and everything was fine. Then I cleared everything out using "Clean My Mac", but still nothing. Is there anything I can do to get my computer back the way it was, or is my iMac gradually dieing?

I tried copying the files off the CD on another mac and then bluetoothing the files to myself, but when i double clicked the install file, nothing happens. I don't think I'm still under warranty, but I'll go to the apple store anyway and see what they think.
As you found out that simply will not work. You need the Install Disc that came with the computer because those discs are machine specific. As it sounds like you no longer have yours you can call Apple and for a nominal charge they will replace them. The original warranty is 1 year or is extended to 3 years if you purchased AppleCare. You can find out what your machine's status is by clicking here.
Regards,
Roger

Similar Messages

  • This is a copy of my crash log....any ideas on what it means and or what the fix is?  It seems to be a CPU system failure.  Interval Since Last Panic Report:  383487 sec Panics Since Last Report:          6 Anonymous UUID:                    437D4685-6299

    I have an older G5 and It has been crashing a lot lately.  Mostly when I'm using billing software or Vinyl cutting software.  It also won't launch safari and occasionally it won't launch mail.  The fan starts running faster and I get dos code that comes up on the screen over whatever program I'm running and it says:
    System Failure:cpu=0;code 1436778.
    This is a copy of the error report that appears after I reboot the comp.  When I run the disk utility I don't see any problems pop up.
    Interval Since Last Panic Report:  383487 sec
    Panics Since Last Report:          6
    Anonymous UUID:                    437D4685-6299-404C-B47F-58CAFEEA3689
    Wed Aug  1 15:46:23 2012
    Unresolved kernel trap(cpu 1): 0x300 - Data access DAR=0x0000000096000008 PC=0x00000000002AFE34
    Latest crash info for cpu 1:
      Exception state (sv=0x54d22780)
         PC=0x002AFE34; MSR=0x00009030; DAR=0x96000008; DSISR=0x00200000; LR=0x00D01C10; R1=0x551A3C50; XCP=0x0000000C (0x300 - Data access)
         Backtrace:
    0x00000000
         Kernel loadable modules in backtrace (with dependencies):
            com.apple.iokit.IONetworkingFamily(1.6.1)@0xcf2000->0xd10fff
    Proceeding back via exception chain:
      Exception state (sv=0x54d22780)
         previously dumped as "Latest" state. skipping...
      Exception state (sv=0x4c95a280)
         PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    BSD process name corresponding to current thread: Unknown
    Mac OS version:
    9L31a
    Kernel version:
    Darwin Kernel Version 9.8.0: Wed Jul 15 16:57:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_PPC
    System uptime in nanoseconds: 4892077689278
    unloaded kexts:
    com.apple.driver.Apple02DBDMAAudio          2.5.8f1 - last unloaded 6780484378
    loaded kexts:
    com.apple.filesystems.afpfs          9.0.2 - last loaded 120971065342
    com.apple.nke.asp_tcp          4.7.1
    com.apple.filesystems.autofs          2.0.2
    com.apple.driver.AppleTopazAudio          2.5.8f1
    com.apple.driver.AppleTAS3004Audio          2.5.8f1
    com.apple.GeForcePPC          5.4.8
    com.apple.driver.AudioIPCDriver          1.0.6
    com.apple.driver.AppleFCU          1.3.2b0
    com.apple.driver.AppleK2Fan          1.0.10f1
    com.apple.driver.AppleHWSensor          1.9d0
    com.apple.nvidia.nv30hal          5.4.8
    com.apple.driver.AppleCPUVoltage          1.5.2d0
    com.apple.iokit.IOFireWireIP          1.7.7
    com.apple.driver.AppleUSBDisplays          2.0.2
    com.apple.driver.AppleVSP          2.2.2
    com.apple.driver.AppleK2Driver          1.7.2f1
    com.apple.driver.AppleSlewClock          1.5.2d0
    com.apple.driver.AppleHWClock          1.5.2d0
    com.apple.driver.PowerMac7_2_PlatformPlugin          3.4.0d0
    com.apple.driver.InternalModemSupport          2.4.0
    com.apple.driver.AppleMaxim6690          1.9d0
    com.apple.driver.AppleI2S          1.0.1f1
    com.apple.driver.AppleAD741x          1.9d0
    com.apple.driver.AppleLM7x          1.9d0
    com.apple.driver.AppleUSBHIDMouse          1.2.4b3
    com.apple.driver.AppleUSBMergeNub          3.5.2
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.1.1
    com.apple.iokit.SCSITaskUserClient          2.1.1
    com.apple.driver.XsanFilter          2.7.91
    com.apple.iokit.IOATABlockStorage          2.0.6
    com.apple.driver.AppleUSBHub          3.4.9
    com.apple.iokit.IOUSBUserClient          3.5.2
    com.apple.iokit.IOATAPIProtocolTransport          1.5.3
    com.apple.driver.ApplePMU          2.5.6d2
    com.apple.driver.AppleK2SATA          1.0.4f2
    com.apple.driver.AppleGPIO          1.3.0d0
    com.apple.driver.AppleVIA          1.5.1d1
    com.apple.driver.MacIOGPIO          1.3.0d0
    com.apple.driver.AppleMPIC          1.5.3
    com.apple.driver.AppleI2C          4.0.0d2
    com.apple.driver.AppleK2SATARoot          1.0.5b1
    com.apple.iokit.AppleGMACEthernet          1.5.9f1
    com.apple.driver.AppleFWOHCI          3.9.7
    com.apple.driver.AppleKauaiATA          1.2.1f4
    com.apple.driver.AppleUSBEHCI          3.4.6
    com.apple.driver.AppleUSBOHCI          3.4.6
    com.apple.driver.AppleK2          1.7.2f1
    com.apple.driver.AppleSPU          2.5.6d2
    com.apple.driver.AppleMacRiscPCI          3.4.0
    com.apple.driver.AppleFlashNVRAM          1.0.5
    com.apple.security.seatbelt          107.12
    com.apple.nke.applicationfirewall          1.8.77
    com.apple.security.TMSafetyNet          3
    com.apple.BootCache          30.4
    com.apple.driver.DiskImages          199
    com.apple.driver.AppleMacRISC4PE          2.0.4d9
    com.apple.driver.AppleOnboardAudio          2.5.8f1
    com.apple.driver.AppleDBDMAAudio          2.5.8f1
    com.apple.iokit.IOAudioFamily          1.6.9fc5
    com.apple.kext.OSvKernDSPLib          1.1
    com.apple.NVDAResmanPPC          5.4.8
    com.apple.iokit.IONDRVSupport          1.0

    It looks lie it crashed doing Network I/O
    Have you blown the dust out of it lately?
    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    iStat Menus...
    http://bjango.com/mac/istatmenus/
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    If you have any temps in the 70°C/160°F range, that's likely it.

  • I have a 6500 officejet printer that says ink system failure what can i do to fix this if anything??

    my printer 6500 office jet says ink system failure help??

    I am having the same problem, but there is not error code associated with the message.  It says: "Ink System Failure.  Please turn Printer off and then on."  No additional codes or instructrions. 
    I have tried to clean the heads without any luck. 

  • Catastrophic system failure on internal drive, can I do this safely?

    I've had a catastrophic system failure on the internal drive of my iMac, but I have a perfectly working bootable clone of everything as of yesterday. Can I just boot up on the clone, demount the internal drive, and continue to work safely? I would just use CCC to clone back the good drive, but I don't have 4 hours to wait. I am trying to complete an FCP project on a tight deadline. What say u? thx!!!
    coocoo

    When I work from my clone (Firewire 800) I notice no performance hit. Even on my FW 400 disk, I notice no performance hit. Do a Permissions Repair from Applications/Utilities/Disk Utility on the disk when you first boot up.
    All your applications should run fine. AFA rendering, that is more dependent on your clock speed than and RAM than on the connection of the drive.
    -mj

  • System failure during locking GL account 5555 by 13113910 Message no. 8I076  and the time of saving out going excise invoice.

    Hi SAP Gurus,
    We are configuring the CIN Settings for our client and at the time of testing, while saving the Out going excise invoice the system is giving the error as “Balance in Transaction Error” and when pressed enter the system displays the error as “ system failure during locking GL account 5555 by 13113910.”
    We have configured Out going excise duty condition types  in the SD pricing procedure
    and
    also maintained the same condition types  as mentioned below  in the path IMG / LOGISTICS GENERAL  / TAX ON GOODS MOVEMENT  /  INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / MAINTAIN EXCISE DEFAULTS
    under the headings
    AR BED Cond – JEXP
    AR Cess Cond – JECS
    ECS AR – JHEC
    And also maintained the settings in the Path IMG / LOGISTICS GENERAL  / TAX ON GOODS MOVEMENT  / INDIA  / SPECIFY  EXCISE ACCOUNTS PER  EXCISE  TRANSACTION and also in SPECIFY G/L ACCOUNTS  PER EXCISE TRANSACTION .
    But still the above mentioned error is comming.
    Note : error in not coming when I am removing the  JHEC condition type  from the path IMG / LOGISTICS GENERAL  / TAX ON GOODS MOVEMENT  / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / under the heading ECR AR, But we need the JHEC(ie. Higher education cess) also in out going excise invoice.
    Please let me know what is the issue and how to resolve it.
    Thanks & Regards
    Shashi

    Dear We faced the same issue and  almost for 20 days to  get it resolved.
    For this kind of error firstly Check have you activated the Liable for AT1 indicator in(IMG>>Log.General>>Tax on goods Movement>>India>>Basic Settings>>Maintain Excise registrations)
    Also Have you assigned Proper GL account in (IMG>>Log.General>>Tax on Good Movement>>>India>>>Account Determination>>Account determination per Excise transaction type.
    Here pl check the relevant GL has been assigned for
    1.RG23A BED(for Both incoming and outgoing excise invoice  updations against your ETT)
    2 RG23C BED, (for Both incoming and outgoing excise invoice updations against your ETT)
    3 .OFF SET,(for Both incoming and outgoing excise invoice  updations against your ETT)
    4 MODVAT.CLEARING, (for Both incoming and outgoing excise invoice updations against your ETT)
    5 PLA BED& AED & SED,(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
    6 PLA CESS(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
    7 CENVAT ON HOLD(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
    8.CENVAT SUSPENSE(for Both incoming and outgoing excise invoice updations against your ETT at the time of invoice posting)
    9.PLA ON HOLD((for Both incoming and outgoing excise invoice updations against your ETT at the time of TR6c)
    10. CENVAT REVERSAL(For cancellations vs ETT)
    11. RG23A ECS(for Both incoming and outgoing excise invoice  updations against your ETT)
    12. RG23C ECS(for Both incoming and outgoing excise invoice  updations against your ETT)
    13. PLA ECS(for Both incoming and outgoing excise invoice  updations against your ETT )
    14. RG23A AT1(check this more carefully)
    15. RG23C AT1(check this more carefully)
    16. PLA AT1(check this more carefully)
    Hope this helps you...
    Phanikumar

  • "HP AIO Printer 7180 " Ink System Failure- Worth Repair ?

    Hi              I have the above all in one printer. it is maybe 8 years old now but an excellent,top of the line printer at that time. I have gotten an " ink system failure" warning and nothing works. I have been told that this means the printer is basically shot-to chuck it-and buy a new one. Its such a nice unit, it seems a shame to not try a repair. my local printer repair shop in Vancouver -eltek- has quoted me about $50 to check it out and up to repair from there. I've heard that this is a common problem with this unit. Question- As I am Disabled , on fixed low income,  can I attempt a self repair and if so , what can I attempt? Would it be worthwhile to pay for this problem repair or should I just write it off and save $100 for the newer type, disposable printers ?                                                                                                              Thanks Most Kindly   Brian Smith in North Vanc 

    Hey ,  Welcome to the HP Support Forum.  I understand your Photosmart C7180 All-in-One Printer is stuck in an error state.  I would like to assist you with this.   According to this article from HP, the sole troubleshooting recommendation is performing a hard reset.  Beyond that, I recommend you reach out to our tech support team. You can click on the following link to initiate a case: www.hp.com/contacthp/
    Once you fill out the online form to create your case you can choose from different direct contact methods.  Even though your printer's out of warranty, you might be able to look into alternative servicing or replacement options with HP.   Addressing your questions about D.I.Y. repair and third-party servicing, I do have some advice that you may want to take into consideration.  The printhead on your C7180 is fixed/permanent.  This means you can't readily take it out and clean it or replace it like you can in other printer models.  Is it possible to dismantle the entire unit and identify the source of the error status (likely the printhead) and repair it on your own?  Maybe... but there are no official guides from HP that support this approach.  With some research online (Google, cough, YouTube, cough ) you might be able to find tips on how to go about this, but we rarely advise this route as it can exacerbate existing issues or create new problems.   Third-party repair businesses may have their own methods for fixing these types of printer errors, but I'm doubtful that they can guarantee a positive outcome, especially with this type of error.  You can end up wasting  money on a fruitless repair.  We don't do pre-sales tips in the Forums, otherwise I'd recommend budget-friendly printers from HP that would match and in many cases exceed the capabilities of your C1780.  If you do end of deciding to pick up a new printer you can checkout new HP models here.   I hope this helps.  Have a great day! 

  • HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

    I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
    Does anyone have any suggestions?
    This question was solved.
    View Solution.

    Hey Spider! First off welcome to the forum.
    I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
    After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
    Thanks,
    SeanS
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • C5180 Ink System Failure hp 0xc19a0024

    Hello Everybody,
    Recently I moved from one city to another. After one week of that I run my HP C5180 printer. Unfortunately I have until today an error: "Ink system has failed. Refer to printer documentation. Error: 0xc19a0024. Turn power off then on again."
    Of course I didn’t find any information in my documentation. Also turn off and on didn't help.
    After reset this error (using Manufacturing Key Combo) I can “Print Report” but page is empty.
    Full reset to the manufacturing settings don’t help. After “Tools/Clean Printhead” or “Tools/Align Printer”... ERORR 0xc19a0024 appear again.
    I called to the HP support, but the printer is out support and I didn’t get answer what this error mean.
    I will very gratefully if somebody explain me what the error 0xc19a0024 exactly mean. Any solutions of my problem are also very welcome.
    Thank you!

    Hi andy_b23,
    Sorry that did not help, the 0xc19a0024 is an Ink System Failure message. If the guide did not resolve your issue, then the next best option is to please call our phone support at 800-474-6836 for your upgrade/replacement options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    Best of luck!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Installed new RAM and now got System Failure: cpu=0 error

    This is so frustrating! I installed a 1 GB RAM chip (4200) in addition to the original 512 RAM. I turned on the computer, everything started and was working. I went in to the System Profiler and it was showing RAM as ok, but it had this: (Reversed) <-- in the name. I thought it was odd, but it was at least showing up. I quit iCal and I got a screen full of code with errors - the one I kept seeing was a kernel error. There was also a message that I needed to restart. I did - then it would not come on (fan was running, no video). So I shut down, took out the RAM, put it back in and let it sit for a few hours. When I turned it back on, it started up and I was able to log in to Gmail and created a message reply. In the middle of typing, I got an error that starts out with "System Failure: cpu=0; code=000000004 (No saveareas)" There's a lot more (about 1/3 of my screen) and the last line says "Waiting for remote debugger connection." I live about an hour and a half from a Mac store, so if I have to get there, I can....but does this mean I have a bad RAM chip or just a bad computer?

    Odds are that it's a bad RAM module. People report many problems even with RAM modules that supposedly meet the printed specs. This is why a vendor that will easily replace modules is helpful.
    Go back to the original 512MB only and see if the computer at least works. You might also try swapping sockets. It's possible you may have exacerbated the dead RAM socket problem, or even just have lint or dust in the sockets.

  • System failure, during call of function module RSWR_RFC_SERVICE_TEST

    Hi Team,
         I am working with BW and Portal Integration, with the Netweaver
    2004s SP 11 version. I have a issue when i run the RSPOR_SETUP program
    to test the configuration.
    The error is on status 5 and 12, i get the following error:
    System failure, during call of function module RSWR_RFC_SERVICE_TEST,
    and when i enter at the dev_jrfc.trc log file, i have the following
    error:
    Exception thrown [Tue Jul 10 16:12:16,687]:Exception thrown by
    application running in JCo Server
    java.lang.RuntimeException: call FM RSWR_RFC_SERVICE_TEST to ProgId
    smxpedvc_PORTAL_EPD on host smxpedvc.grupoempresarialangeles.com.mx
    with SSO not authorized: No login module succeeded.
            at
    com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest
    (RFCDefaultRequestHandler.java:79)
            at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest
    (RFCJCOServer.java:156)
            at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
            at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest
    (MiddlewareJRfc.java:2405)
            at com.sap.mw.jco.MiddlewareJRfc$Server.listen
    (MiddlewareJRfc.java:1728)
            at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
            at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
            at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
            at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
            at com.sap.engine.core.thread.impl3.ActionObject.run
    (ActionObject.java:37)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sap.engine.core.thread.impl3.SingleThread.execute
    (SingleThread.java:100)
            at com.sap.engine.core.thread.impl3.SingleThread.run
    (SingleThread.java:170)
    Could you help me to solve this issue.
    Thanks so much.

    Have you checked the user that is used to connect from J2EE back to ABAP?
    I had a similar problem, went into the Visual Administrator and found the incorrect password (or possibly outdated password) was being used to communicate back to ABAP, and updating that sorted out my problem.
    Hope this helps.
    Cheers,
    Andrew

  • System Failure : FRONTEND_ ERROR raised While Calling RFC from R/3 to CRM

    Hi Experts,
    I'm Getting the Error System Failure Error "Error has occurred making remote call to method DISPLAY in system CRP_110".
    RFC function Module : CRM_FM_ACL_DISPLAY_FPO.
    I have Check the RFC Destination and other parameters passed is same.
    Please help me to resolve this issue in production and it's w

    Hi Nilesh,
    Well if you have already checked whether the FM is available in CRM system, then check SM58 & SM21 for logs of the RFC call. That should have the details for failure.
    Also please check if the FM is remote enabled. I dont have access to CRM system, hence cant verify.
    Thanks,
    Best regards,
    Prashant

  • Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

    Hi Planning installation Gurus,
    Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
    OS: Vista Premium
    SQL Server 2005
    Essbase:9.3.1
    Error Message: "System Failure: Error while retrieving xml file from database"
    Details of error:::::::::::::::::::::::::
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    Pls provide Solution

    Hi John,
    though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
    SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
    SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
    SYSTEM_DB_USER=windowsAuthentication
    SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
    SYSTEM_DB_CATALOG=plandb
    SYSTEM_DB_TYPE=SQL
    INSTANCE=
    my steps:
    Using SQL Server Management Studio
    Changed Widows authentication to SQL server authentication mode
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    To restart SQL Server from SQL Server Management Studio
    To enable the sa login by using Management Studio
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.}}}
    anything else should i change.................

  • Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

    Hi S9 installation Gurus,
    Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
    Detail of Problem:-
    After Susessful configuration of
    1) Foundation Services (Hyperion Shared Services)
    2) Essbase administration services
    3) Essbase Server
    4) Hyperion reporting and analysis
    5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
    Error Point: when i tick ckeck box in front of Product instance registration
    click next
    create instance
    click next
    instance name-Plan1
    Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
    server port: 8300 (system suggesting)
    tick on active instance
    click next
    Error Pop Up "System Failure: Error while retrieving xml file from database"
    Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
    SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
    SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
    SYSTEM_DB_USER=puser
    SYSTEM_DB_PASSWORD=GGAKFJ
    SYSTEM_DB_CATALOG=p1db
    SYSTEM_DB_TYPE=SQL
    INSTANCE=
    Note: puser (SQL Authenticated user)
    Thanks
    Kumar
    Edited by: user10385300 on Dec 4, 2008 5:44 AM

    This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • System Failure:-Error while retreiving xml file from database

    I install Planning 9.3.1 at Windows2003 server SP1 and MS SQL 2000 SP3A. In Hyperion Planning Instance Registration I take "System Failure:-Error while retreiving xml file from database" error in Configuration .
    Please help
    Thanks

    I also have the same error. Win2000 Server and MS SQL 2005.
    Maybe someone made request for official information from Oracle about this issue?
    I'd like to change MS SQL to Oracle 10g, I hope this can helps (if reason in RDBMS). But if reason in logic of scripts... I dont't know...

  • "ink system failure" error with code oxc19e0023 on a HP Photosmart Premium All-in-One Printer - C309

    "ink system failure" error with code oxc19e0023 on have a HP Photosmart Premium All-in-One Printer - C309g  - Have done all the resets and reseated the ink also tried replacing ink with new HP carts..getting frustrated please help
    This question was solved.
    View Solution.

    Have you tried the steps outlined in this article:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
    If not give the steps a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Maybe you are looking for