Is this a Itnues problem or is it my ipods problem?????

well im like really frustrated right now.... i recently got some new songs that i want in my ipod touch .. i usually charge my ipod on fridays or thursdays right but i did this on tuesday but when i plugged my ipod touch into the usb i got this ............................................................................... ........
" itunes was unable to load data class information from sync services reconnect or try again later"
i did try later and nothing all that happened was it froze itunes then when the message would pop up i could see the ipod icon but i could not click it cuz itunes was frozen, i tried uninstalling itunes and apple mobile device but nothing.. ive seen some posts here but nothing they had helped. i googled this and nothing and im like really frustrated cuz ima go on vacation to vegas and i cant go with out the new songs :'( please help me!!
im running Windows XP sp2
and my ipod is a 8GB 2.2 5g77a

woops.. i found the root of my problem seems i installed the program flyakite and if f* up my shell 32 dll and i installed flyakite again but instead of 128x128 icons i put 48x48 and whala i got it

Similar Messages

Is this an Apple Problem or a Denon Problem?

I use the most recent Mac Mini as a media center in my living room. Using a DVI to HDMI adapter the Mac Mini video feeds into my Denon AVR-4306 Receiver. The audio is pumped out of the standard headphone jack. At the end of each viewing session, the TV and receiver are powered off, but the Mac Mini stays on.
Prior to upgrading to Snow Leopard this setup worked great - but after the upgrade, I'm now having a video display issue and I'm not sure if I should call Apple or Denon to help resolve this.
I set Snow Leopard to use the 1080p resolution setting. I've confirmed that both my reciever and my TV are indeed 1080p and upon first boot things work perfect. The problem starts when I turn off the TV and Receiver. What happens is, after the TV and Receiver are turned off, the Mac Mini is reverting to the 720P display setting. The next time the TV and receiver are turned on, I'm looking at a 720P display setting.
I don't understand why it's flipping to this lower resolution and am wondering if anyone has a fix that will prevent this from happening?
I have found two workarounds - neither are any good. The first is after turning back on the TV and receiver, using the keyboard shortcut to log out. Logging out triggers the display check and it reverts back to the 1080p setting. A reboot also fixes this issue.
Secondly, is this an Apple problem or a Denon Receiver problem?

After much discussion back and forth between Apple and Denon, it was discovered that the Denon receiver does not support 1080p - only 1080i - this was not the information I orginally received from Denon.
Setting the Apple to use 1080i for the resolution, then configuring the Denon Receiver to use HDMI pass through for the HDMI output resolved this problem.

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Itunes has Stopped working error. i keep getting this error iv rebooted reinstalled it was working fine till i lost power and turned my computer back on. now nothing i do seems to fix it im running windows 7 64 bit. this is the problem details box thing

This is the problem details that come up with the box that says itunes has stopped working windows will close program..etc
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.4.1.10
Application Timestamp: 4e4e1904
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7600.16850
Fault Module Timestamp: 4e211485
Exception Code: 80000003
Exception Offset: 0001280c
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:

I had the same problem. I'm using 64bit Windows7. This solution only partially worked for me. I still couldn't connect to the iTunes store.
The following solution worked for me:
COPY    QTMovieWin.dll
FROM    c:\program files (x86)\common files\apple\apple application support\
INTO     c:\program files (x86)/iTunes

Dear Ms. Qaya Ltfabh help me. I do not know why this is a problem that has been part of Russian Tvlbarmn(mozila firefox). What I Brgrdvnmsh Vnmydvnm again in En

Dear Ms. Qaya Ltfabh help me. I do not know why this is a problem that has been part of Russian Tvlbarmn. What I Brgrdvnmsh Vnmydvnm again in English. Bkhvahydmytvnm send a screenshot if I tell you to see exactly my problem. Thank you
I also say that in English I dont know if Nmdarm Mykhvahydbh help me help in the form of a video file or image...Anglysym your friends know I'm so weak, so therefore the description Vsvalattvn noticed something. If you have software that will solve my problem please let me download it, I probably am

I don't understand what question you are trying to ask. Can you restate the question?

HT5624 My husband, myself & our 2 daughters all use the same Apple ID but w different user names. Is this a potential problem?

4 members of my family use the same Apple ID but different user names
Is this a potential problem w privacy etc?

Since the Apple ID does not have a username, I suppose you mean different e-mail-adresses?
In theory, this is not a problem, but of course it can be difficult if you want to keep things separated. For example, logging in with you Apple ID will automatically set up iCloud and sync your calendar, reminder, notes, mails etc. You can disable this syncing on your daughter's devices, but then they won't be able to use functionalities unless they create their own accounts (for example set up another email account). I think (but I am not 100% on this) they will be able to create reminders/notes etc. locally on the iphone.
If you mean app-wise or legal-wise: No, this is not an issue. You can use your Apple ID and the apps you bought on up to five different devices. Still, for simplicities sake and to give everyone their share of privacy I personally would suggest different IDs for everyone.

Can't add a new event to iCal on my iMac - but the event sync's to my iPad - is this a Lion problem? iCloud is on.

Can't add a NEW EVENT to my iCal on my iMac- however the event is sync'd to my iPad with no problem. iCloud is turned on for iCal. Is this a Lion problem or something turned pff. I cannot find an answer. Help?
Williamfronsc

William,
It is a possibility that you are adding new events to your "On My Mac" calendars.
"On My Mac" calendars will not sync with iCloud. After backing up the "On My Mac" calendars, and ensuring that all events are duplicated on your iCloud calendars you can delete any "On My Mac" calendars.
For further troubleshooting advice read iCloud: Troubleshooting iCloud Calendar.

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot go back to the project at all.

If you are using 10.0.3 or above Apple added a backups folder that for a little extra protection in cases like this. If you quite FCPX go to your Final Cut Pro Projects folder. Find the folder that has the project in question. If it has a backups folder there should be a file with a date stamp and .fcpproject extention, that is your back-up. Just move the back-up from that folder one folder up to the place where you deleted CurrentVersion.fcpproject from. When I have had to do this I haven't renamed the backup but some people to recomend that you rename it to CurrentVersion.fcpproject and it seems to work both ways. Ofcourse it wont work if there is already a CurrenVersion file there you will need to delete that one first.
If you don't have the backups folder or there is nothing in it I am not sure if there is anything that can be done.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

My iPod Touch 3rd Gen is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. Is this a common problem? Is there a fix?

My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?

Try this for the freezing
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
Or if they don't work put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414

It has been only about a month that i bought my macbook pro 15 but it is heating up really fast on the left side even when the cpu usage is only 10%...i'm worried if this is a problem of the hardware.

it has been only about a month that i bought my macbook pro 15 but it is heating up really fast on the left side even when the cpu usage is only 10%...i'm worried if this is a problem of the hardware?

The way something "feels" is very subjective. We would need to know your actual temps. You can install the free iStat Pro widget which is available as a download directly from Apple:
http://www.apple.com/downloads/dashboard/status/istatpro.html
Let us know what CPU temps you're seeing at the time you feel your machine is hot. As you indicated your CPU usage was only 10%, that would imply that you already know that heavy CPU usage would be one cause for your machine to be running on the warm side... but that doesn't seem to be the cause here.

TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

I have 2 iphones registered under the same appleID. Every text message that is sent to my phone, the other phone receives as well. If I turn "imessage" off on the other phone, will this solve the problem from her receiving text messages meant for me?

I have 2 Iphones, registered under the same AppleID. Mine, and my mom's. I recently (today) did the software udate for her phone, and ever since-she receives every message i send to my girlfriend, and every response that my girlfriend sends to me. I read up on Imessage, and checked the settings on both phones. On each phone "imessage"was turned on, so i turned Imessage off. Will this solve the problem of my mom receiving every message that i send and receive? Also, if i turn Imessage back on, on my phone-will i still have privacy to text?

Why not create a second Apple ID? Wouldn't that solve the problem much more straightforwardly?
Here's a helpful website: http://www.apple.com/support/appleid/

How to solve this "amnesia" protect problem

Hi All
I have a two nodes one quorum cluster environment. I just see this problem:
I shutdown nodeA and all all othe resource groups switch to nodeB, it works fine
and I believe quorum device vote belongs to nodeB.
Then I shutdown nodeB and power on the nodeA, nodeA cannot boot as cluster,
there's messages like:
NOTICE: clcomm: Path NodeB:e1000g0 - NodeA:e1000g0 errors during initiation
WARNING: Path NodeB:e1000g0 - NodeA:e1000g0 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path.
NOTICE: CMM: Cluster doesn't have operational quorum yet; waiting for quorum.
I know this is because the quorum vote is nodeB to prevent amnesia condition.
But I still confused for this: if the problem occurs, nodeB is broken and cannot
boot anyway,what people can do is just hack the CCR?Is there any solution ,for
example, nodeA can boot as cluster master and after nodeB come up ,the DR can
update the older nodeB CCR ?is there any option for this?
thanks
lifeng

here a procedure from http://prefetch.net/reference/suncluster.txt :
# Recovering from amnesia
# (use at your own risk)
Scenario: Two node cluster (nodes A and B) with one QD,
nodeA has gone bad, and amnesia protection is preventing
nodeB from booting up.
- Boot nodeB in non-cluster mode (boot -x).
- Edit nodeB's file /etc/cluster/ccr/infrastructure as follows:
- Change the value of "cluster.properties.installmode" from
"disabled" to "enabled".
- Change the number of votes for nodeA from "1" to "0",
in the following property line:
"cluster.nodes.<NodeA's id>.properties.quorum_vote".
- Delete all lines with "cluster.quorum_devices" to remove
knowledge of the quorum device.
- Run command:
/usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/infrastructure -o
- Reboot nodeB in cluster mode.

Is this a Itnues problem or is it my ipods problem?????

Similar Messages

Maybe you are looking for