Is this card supported for 3d ray tracing optimized with CUDA?

On the system requirements list for after effects CS6, the 660 is not listed, but I just wanted to double check. According to nvidia's website the 660 supports CUDA optimized functions. There is also the fact that sometimes softwares fail to keep up to date with what hardware works. Is this one of those case?

For a list of supported hardware acceleration cards start at http://forums.adobe.com/thread/773101 and click the system requirements link
Most nVidia cards that are not in the list may be used for hardware MPE if they have at least 1Gig of video ram, by means of the hack http://forums.adobe.com/thread/629557

Similar Messages

Support for eDirectory 8.8.5 with ZEN7, current status?

What is the current status on this issue?
"Support for eDirectory 8.8.5 with ZEN7"
http://www.novell.com/support/viewCo...3796&sliceId=1
Regards
Rolf Lidvall
Swedish Radio (Ltd)

The only "known" issue is Imaging on a 64-Bit Linux Platform, AFAIK.
Other than that, it's just a matter of finishing verifications.
"Rolf Lidvall" <[email protected]> wrote in message
news:ulRem.1947$[email protected]..
> What is the current status on this issue?
>
> "Support for eDirectory 8.8.5 with ZEN7"
> http://www.novell.com/support/viewCo...3796&sliceId=1
>
>
> Regards
> Rolf Lidvall
> Swedish Radio (Ltd)
>
>

When support After Effects Ray-traced 3D the GPU of the new iMac with retina display (GPU: AMD Radeon R9 M295X 4GB)?

I would like to know whether After Effects CC Ray-traced 3D support the GPU of the new iMac with retina display.

It never will. This is nVidia-exclusive technology and the whole things is deprecated, anyway. You better learn to use Cineware, buy a 3D program like Pro Animator or Element 3D or learn a proper 3D program.
Mylenium

BCM43227 Wlan Card Support for x230t?

Hi, everyone. I have a thinkpad x230t and recently changed my OS so I need to replace my WLAN card because there's no driver for intel cards.
I checked Lenovo documents, here http://download.lenovo.com/parts/ThinkPad/x230t_fru_bom_20140421.pdf
it says BCM43227 card with FRU number 03T9015 is supported so I made my purchase online. But upon boot on it gives me 1802 error saying it's not a proved card.
The BCM43227 card I have has ID/DEV numbers: 14E4/4358/14E4/0543. I assume it's the same card mentioned in the pdf. I have bios version 2.55, will updating bios solve this problem?
Did anyone have experience with this card? Please help!

Hi, George:
Thank you for your reply!
The seller who sold me this card claims it is the same product as 03T9015, it's just Lenovo makes different lables during different periods. I compared this card with 03T9015 pictures online and they appear to have the same Lenovo P/N number and the same Cyber Tan P/N number. But the card I have is mssing the FRU numbers. I'm attaching pictures of both.
My questions are:
1. Is my card realy 03T9015?
2. If this is not, will a real 03T9015 pass the whitelist check?
To my understanding, the way whitelist works is to check the card's Dev/Ven and Sub Dev/Ven numbers. Can someone who has 03T9015 post his/her numbers so I can compare with the one I have?
Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums

Want to use touch screen in photoshop. Heard this is supported for new surface 3, is there any way to use it on any touchscreen laptop running windows 8.1?

Hi, I have the lenvo yoga 2 touch. I run windows 8.1, want to use touh facilities in photoshop. Can I do this yet? Heard surface 3 can due to special deal with adobe, will this be availble to all cc users or will there be extra charge etc. Any info appreciated. Sorry for bad english, late nights with little one!

Touch is available for all Windows 8 devices that support direct (on-screen) touch. Note: touch is only enabled of you are using open-gl, so the restriction is that your computer must be able to support open-gl/hardware accelerated drawing. You can download the trial version of Photoshop and try it out.

When Will There Be Updated Support For Blu Ray Authoring????? Good Question

Hi
What is the Hold up for Blu Ray Technology? Why is Apple dragging their feet for our great Macs to produce Blu Ray Hd authored DVDs when the windows is already ahead? I dont dont understand it, does anybody have a clue? , Ha!Ha! your secret agent news would be welcomed! Happy Editing!
Tim C.

Some rumors have been saying it will be available in the next release of Studio (FCP 6). Rumors say they are debuting this during NAB (April 16 ish). There are also rumors of FCP Extreme for about $10K per license, but I'll let you have fun thinking about that one

IDVD support for Blu ray

We want a new issue of iDVD with support to burn Bluray and more menu themes
I bought an external Lacie Bluray burner and it´s OK, but menus of Toast v.10 are...uhh!. iDVD is fantastic but need support for Bluray.
Please coment

Use Roxio's Toast Titanium.
Don't 'hold your breath' waiting for a Blu-ray version of iDVD.

GE cards supported for port- vlan based EoMPLS on 7600/sup720

Hi,
Can anyone explain/point where I can find de proper documentation where I can find the support for port- vlan based EoMPLS support cards on a 7600 with a sup720 engine on the CCO site ?
WHich GE port cards are supporting EoMPLS and which GE cards will support it not.

try
www.cisco.com/go/fn
-Waris

SDXC card support for cRIO 9031 Linux Real Time

The cRIO9031 with Linux Real Time did not support SDXC cards. Only SDGC with a maximum of 32GB supported by cRIO.
For logging application their is a need for more than 32GB => use of SDXC cards with 128/256 GB

Hi Schott,
Unfortunately, Linux does not have native (in kernel source) support for the exFAT filesystem (required for a device to be labled SDXC). As soon as such a filesystem is supported in Linux, we can enable direct support for exFAT.
In the meantime, there is nothing preventing you from formatting the card in a filesystem type that is supported on the target. FAT32 is unfortunately the most portable, accessible format, of course if you don't need to access the contents of the card from a Windows machine, you can use some of the tools on the RT controller to format the card in a more robust, journalling filesystem such as EXT4.

How to update graphics card drivers for late 2008 macbook pro with Nvidia 9600m GT?

Can anybody help me update the drivers for my 9600m GT graphics card for my Late 2008 Macbook pro? I am running OS X Lion 10.7.5 with a Windows 7 partition. I have tried finding support on Nvidia's website, but at least for the 9600m GT, it isn't supported for my operating system. Would I have to update it from my Windows side? And if so, would the update apply to my OS X side as well? I have a little computer knowledge, but nothing indepth.

Welcome to Apple Support Communities
In OS X, Apple provides the GPU drivers and you cannot update them from NVIDIA. They are updated with each OS X update, so you are running the most recent drivers for your OS X version. OS X Mountain Lion and Mavericks have got more recent GPU drivers, but it's not worth upgrading unless you need newer drivers for an app (I highly doubt this).
However, you can update the GPU drivers in Windows, and you should do it to get the best performance. You can download them from the NVIDIA site > http://www.nvidia.com/Download/index.aspx?lang=en-us Note that drivers are only applied in the operating system you are installing them, so they will not be installed in OS X

Mpeg 2 for Blu-ray audio exports with missing frames at beginning and end.

Im using a Matrox Axio LE system and the Matrox Media encoder to export an Mpeg 2 for blue-ray. My footage is shot in 1280x720p 59.94 drop frame. I have found that after exporting the file from the encoder and bringing it into Encore CS3 that the audio that was exported is a little shorter than the video. Frames are missing at the end of the file.
Because of this my video and audio are way out of sync. Has anyone else come across this issue?

Maybe on the Matrox forums.

Line Cards support for SupEngine 7

Hi,
I would like to upgrade my 4507 core switch which currently has Sup IV to Sup7.
the core switch currently has classic line cards WS-x4506-GB-T and WS-x4224-RJ45V and my worry is these May not be supported..
The datasheet list these as part of the supported classic cards but I would wish to get a confirmation that this is indeed so and what issues I should expect? please advise...
Sent from Cisco Technical Support iPad App

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Line cards shouldn't be an issue. (Don't recall us bumping into any line cards issues with the sup7.)
You may need to upgrade your chassis, though.

MicroSD card support for 808 PureView an Nokia N8-...

Hello community,
this is just an Information from my personal experience.
Yesterday I bought a 808 PureView and inserted a Sandisk Ultra Class 10 micro SD with UHS-I.
http://www.amazon.de/dp/B007JTKLEK
This memory card does not work with Symbian Belle Feature Pack 1 Software Version 112.020.0311 which is dated 2012-06-26. The same micro SD card does work very well in my Nokia N8-00 with Symbian BelleRefresh Software Version 111.040.1511 dated 2012-07-28.
I'm currently investigating which high speed 32GB micro SD will work in the Nokia 808 PureView.
Wolfgang
Wolfgang Exler
Stuttgart, Germany
Solved!
Go to Solution.

@Wolfgang_Exter
Using Sandisk 32GB Class 4 microSDHC in 808 without issue, although Class 6 advised for recording HD video.
Happy to have helped forum with a Support Ratio = 42.5

Latest google voice support for xperia ray

Good day to you all,
Well, as you know very recently google introduced there developed voice search which acts similar to Siri (in iOS) at google I/O dev conference for jelly bean. And I saw a blog on gsmarena saying now that feature is release for the ICS available devices.. I just wanted to know, when sony devices such xperia ray will get this >>
source: http://blog.gsmarena.com/google-now-hits-all-ics-devices/

Keep your eyes on the Developer Blog and Product Blog. If this will be made available in the official software I am sure there will be news posted on these blogs. For now, I don't have any information about this though.
http://developer.sonymobile.com/wp/
http://blogs.sonymobile.com/products/
What do you think about this forum? Let us know by doing this short survey.

This card game for class

i had this original program that i got to work then my teacher asked me to add in those gui stuff and now i dont know what to do
ok here are my methods:
// Demonstrating the JTextField class.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Test extends JFrame {
private JTextField input,input2;
private JLabel label1,label2;
private JButton endButton;
// set up GUI
public Test()
super( "yo" );
Container container = getContentPane();
container.setLayout( new FlowLayout() );
// construct textfield with default sizing
label1 = new JLabel("How many players?");
     input = new JTextField( 10 );
     input.setToolTipText ( "How many players?" );
container.add( label1 );
container.add( input );
// construct textfield with default text
label2 = new JLabel("How many cards?");
input2 = new JTextField( 10 );
input2.setToolTipText( "How many cards?" );
container.add( label2 );
container.add( input2 );
     endButton = new JButton( "Deal" );
     ButtonHandler ButtonAction = new ButtonHandler();
     endButton.addActionListener(ButtonAction);
container.add( endButton );
setSize( 275, 170 );
setVisible( true );
public static void main( String args[] )
Test application = new Test();
application.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
private class ButtonHandler implements ActionListener
     public void actionPerformed( ActionEvent event )
          int players=0;
          int tofinish=1;
          String player;
          player = input.getText();
          String cards;
          cards = input2.getText();
          Cards card;
          card = new Cards();
          for (;tofinish<=players;tofinish++)
          card.clearitout();
          card.deal();
} // end class TextFieldTest
and then here is my test program
import javax.swing.*;
public class TestCards{
     public static void main (String[] args) {
     Cards card;
     card = new Cards();
     card.clearitout();
     card.deal();

here is the code for the original game that worked without the gui
import javax.swing.*;
import java.util.Random;
public class Cards extends Object{
String cards[] = new String[52];
String cardnames[] = {"ace","two","three","four","five","six","seven","eight","nine","ten","jack","queen","king"};
String suitnames[] = {"spades","hearts","clubs","diamonds"};
Random rand = new Random();
//constructor
public Cards()
public void clearitout () {
for(int index=1;index<=cards.length-1;index++)
cards[index]=("unused");
public void deal () {
int cardsdelt=0;
int index;
while(cardsdelt<=5)
index=(rand.nextInt(52));
if (cards[index]=="unused")
cards[index]="used";
System.out.println(cardnames[identifycard(index)] + " of " + suitnames[identifysuit(index)]);
cardsdelt++;
System.out.println("");
private int identifysuit(int index) {
int suit=0;
suit = index/13;
return suit;
private int identifycard (int index) {
int card=0;
card = index%13;
return card;

Is this card supported for 3d ray tracing optimized with CUDA?

Similar Messages

Maybe you are looking for