Is this correct to use? wdr_task= client_window- get_parameter('parameter')

Hi,
I´ve seen the uso of wdr_task=>client_window->get_parameter() in some threads and I have used it and is working fine, my question is where can we look at some documentation about WDA objects, how can I know if it is not deprecated?
hope some body can help.
Thanx in Advanced!
kind Regards,
Gerardo J

Hi!
thanx Thomas for the Advice, Abhimanyu Thanx for the Answer I have not tryied the solution you gave me but I will post a new thread regarding this question, in the mean time I could give you the points as a very helpful answer since it seems to be a good aproach, really hope you can junmp in the other thread regarding this.
new Thread
Really apreciate the Help!
Kind Regards,
Gerardo J
Edited by: Gerardo Jiménez on Jan 11, 2011 12:00 PM

Similar Messages

Changing feed url from Blogger to Podomatic, using Feedburner...Am I doing this correctly?

Apologies in advance for my newbie-ness, but I recently started a podcast (Candid Voices) using Blogger and then burning with Feedburner, from which I submitted the feed to the Itunes Store (which was accepted).
However, I have had to switch to PodoMatic for my podcast hosting. I recently updated my Feedburner source url (just an hour ago), and I believe that should cause the Itunes store to update my Podcast eventually...however, I don't want to wait a few days and then figure out there was another step I was supposed to take to complete the changeover.
Can someone let me know if I've done this correctly and can expect the Store to reflect the changes within a couple days?
My PodoMatic url: http://candidvoices.podomatic.com
My Feedburner url: http://feeds.feedburner.com/candidvoiceswithdonny
If you need other information, please let me know.
Thanks in advance for your patience and help!

Oddly you appear to have two identical feeds:
http://feeds.feedburner.com/candidvoiceswithdonny
http://feeds.feedburner.com/CandidVoicesWithDonny
iTunes is using the latter, but they are the same and are both drawn from the Podomatic feed, so I suppose Feedburner is somehow creating two simultaneously. However on your next update you should make sure that the latter feed is indeed being updated.
Both episodes appear when subscribing, but the Store hasn't caught up yet - it was only posted today, so it should catch up in 1-2 days. There's no further action you need take.

I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

I am having trouble connecting my bluetooth headset on the ipad 1. I have now been told that Apple is only allowing several headsets to be used with Ipad. Is this correct? I have a grundig headset and a plantronics headset but these can both not be found

Check this out....
http://support.apple.com/kb/HT1664

Using 10.6.8, internet pdf documents not opening using Adobe Reader; how is this corrected?

Using 10.6.8, internet pdf documents not opening using Adobe Reader; how is this corrected? I've tried changing "sharing and permissions" to "read and write" as suggested on other help sites, but this did not correct the problem.

I had the same problem---contacted Adobe and their service rep helped me by
A.   Deleting Adobe Reader from my iMac's Applications in Finder
B.   Downloading Google Chrome browser and then
C.   Downloading the latest Adobe Reader for Mac 10.6.8 in Google Chrome--it works
Adobe acknowledges problem with the latest Snow Leopard update 10.6.8 and with this work around, I can open PDF's using the Google Chrome Browser.
Is this the ideal solution---NO. Safari is my main browser. I now have to use a separate browser for PDF's.
Am I happy to be able to open PDF's---YES
You can't believe the time I spent to solve this problem before calling Adobe for help. My Apple Care policy expired a month ago . As I use Photoshop Elements, I was not charged by Adobe for their help on the telephone.

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message. This didn't used to happen. How can this be corrected?

After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message. This didn't used to happen. How can this be corrected?

When you right (control) click on the disk and click eject "disk name", do you pull it immeadiatly or wait a few seconds for it to unmount? Try waiting and see if you get the same message. If you do, when the disk is connected go to applications/utilities/disk utility, after opening DU, select the volume in question from the left side bar and try a permissions repair, you may also run verify disk and see if it comes up with any errors (they will be in red)

I am trying to reinstall iTunes 11.1.5 after the update hung. I noticed that the 64 bit installer uses the 32-bit "Programs" folder as the default. Is this correct?

The update from v11.1.3 to 11.1.5 using the iTunes internal updater hung about 80% through the install. I had to kill it and reboot before I could uninstall the existing version since I did not know what state the program was in. When I started the reinstall using the 64 bit version, it showed a default installation directory of "Program Files (x86)". Is this correct? I know iTunes had something installed in the 64 bit "Program Files" directory.. Before I procede, I want to be sure that it is not going in the wrong place. I have a Win 8 PC.
Thanks,
JohnD

Yes... that is correct.
On 64-bit machines iTunes installs various components into the following folders (or localized equivalents):
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iPod
C:\Program Files\iTunes
C:\Program Files (x86)\Apple Software Update
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple
C:\Program Files (x86)\iTunes
tt2

Would like to use an alarm clock. I need the alarm clock to function from the sleep mode. A review said that MAC products will not allow a program to wake up a Mac. Is this correct ? Are there any products in the Mac store what will function from the

Would like to use an alarm clock. I need the alarm clock to function from the sleep mode. A review said that MAC products will not allow a program to wake up a Mac. Is this correct ? Are there any products in the Mac store what will function from the sleep mode ? How do I check this out ?

You can set times for your computer to turn on or wake from sleep in the Energy Saver system preference pane using the Schedule... button.

Can I refactor this query to use an index more efficiently?

I have a members table with fields such as id, last name, first name, address, join date, etc.
I have a unique index defined on (last_name, join_date, id).
This query will use the index for a range scan, no sort required since the index will be in order for that range ('Smith'):
SELECT members.*
        FROM members
        WHERE last_name = 'Smith'
        ORDER BY joindate, idIs there any way I can get something like the following to use the index (with no sort) as well:
SELECT members.*
        FROM members
        WHERE last_name like 'S%'
        ORDER BY joindate, idI understand the difficulty is probably; even if it does a range scan on every last name 'S%' (assuming it can?), they're not necessarily in order. Case in point:
Last_Name: JoinDate:
Smith          2/5/2010
Smuckers     1/10/2010An index range scan of 'S%' would return them in the above order, which is not ordered by joindate.
So is there any way I can refactor this (query or index) such that the index can be range scanned (using LIKE 'x%') and return rows in the correct order without performing a sort? Or is that simply not possible?

xaeryan wrote:
I have a members table with fields such as id, last name, first name, address, join date, etc.
I have a unique index defined on (last_name, join_date, id).
This query will use the index for a range scan, no sort required since the index will be in order for that range ('Smith'):
SELECT members.*
FROM members
WHERE last_name = 'Smith'
ORDER BY joindate, idIs there any way I can get something like the following to use the index (with no sort) as well:
SELECT members.*
FROM members
WHERE last_name like 'S%'
ORDER BY joindate, idI understand the difficulty is probably; even if it does a range scan on every last name 'S%' (assuming it can?), they're not necessarily in order. Case in point:
Last_Name: JoinDate:
Smith          2/5/2010
Smuckers     1/10/2010An index range scan of 'S%' would return them in the above order, which is not ordered by joindate.
So is there any way I can refactor this (query or index) such that the index can be range scanned (using LIKE 'x%') and return rows in the correct order without performing a sort? Or is that simply not possible?Come on. Index column order does matter. "LIKE 'x%'" actually is full table scan. The db engine accesses contiguous index entries and then uses the ROWID values in the index to retrieve the table rows.

I want to install hybrid drive in Macbook pro. I bought my Mac book with lion and am now running mountain lion. I was told I needed install disk to set up new drive before restoring from my time capsule.Is this correct and if so how do I get disk osx10?

I purchased a Mac book Pro in Aug 2012 with lion and have upgraded to mountain lion. I currently am looking to install the segate 750 gig hybrid drive. I watching video I shows me needing a OSX 10 disk to boot off of when the new disk is in and the use time capsule to restore system from back up drive to new hybrid. Hope I got this correct so far. that being said my Mac Book did not come with a disk therefore is one available, when I get to point of restoring from back up with it be the same mountain lion system I had. Sorr if this sounds redudant.. Thank you in advance

Connect the new hybrid drive to your MBP. Start up your MBP holding the OPTION key, the two HDD icons will appear. Select the 'restore' icon on the right. When you get to the menu where you have 4 options, select Disk Utility. Format the drive and then you can use the option of restoring it from Time Machine.
Ciao.

I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can u

I purchased photoshop elements 8 on line in 2010. I recently switched to a new desktop computer. Photoshop asked for my serial number. I entered the correct serial number (obtained from Adobe). It says it is invalid. How do I get this corrected so I can use the product I purchased?

Hi Rosera,
This is bad and I am sorry to hear that you are running into these issues.
Let me connect with you, so right now, the current state is that you have installed copy of PSE 8 in trial on your windows 7 machine, and when you are trying to enter the serial number from your PSE 8 Box, it is saying the serial number to be invalid?
It might sound pretty obvious, but please make sure that you are entering the serial number correctly and of PSE 8(in case you bought a PEPE box)?
Have you tried the steps mentioned below by Barbara?
If possible, you can send me the serial number through PRIVATE MESSAGE and I can check it on my end that whether the serial number is indeed invalid or that the issue is with your machine?
Regards,
Ankush

I read that I can have iworks for free on my iPad if I own a copy for my computer. Is this correct, and how do I download it wit out being charged?

I read that I can have iworks for free on my iPad if I own a copy for my computer. Is this correct, and how do I download it without being charged?

There really is nothing more to say than what Allan has already said, but to explain just a little further, what you may have read is that once you purchase an iOS app in the app store, you do not have to purchase it again if you need to download it to another iOS device. In other words once you buy the app, you can load it onto unlimited iPhones, iPod Touches or iPads.
You must be using the same iTunes account that you originally purchased the app with in order to download it again. But as Allan said, just because you have it on your Mac does not entitle you to download it free to your iPad.

I have original ipad and however I cant add my phone number to lmessage it will only take an email address . Is this correct ?

I have original ipad and however I cant add my phone number to lmessage it will only take an email address . Is this correct ?

I copied this from an Apple Support article.
If your phone number is not listed on an iPod touch or iPad, follow these steps:
Update to the latest version of iOS.
Verify that you're using the same Apple ID that you are using on your iPhone.
On your iPad or iPod touch, sign out of your Apple ID in the following locations:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
Sign in to your Apple ID with FaceTime and iMessage.
If your phone number is still not listed, follow these steps:
Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
Sign in to your Apple ID on your iPhone.
When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and also in Settings > FaceTime.
Now sign in to your Apple ID on your other iOS devices.
This is the website for the support article.
http://support.apple.com/kb/HT5538

So if I understand this correctly...

... there is no "great" way to manage the fans and monitor temperature levels for my new (unibody) MacBook Pro when running Windows XP via Boot Camp? I have Boot Camp 2.1, Windows (Media Center) SP2, a MacBook Pro 2.8GHz and a bit of disbelief.
So far as I understand it, Speedfan is useless because there isn't a configuration file which can acquaint the program with this motherboard/chipset, therefore Input Remapper is the only remaining choice, and fan speeds must be set manually there, instead of in a manner where they would adjust depending on CPU load and temperature.
Does this all agree with consensus?
I'm fairly unhappy at the moment. Of course I anticipated making a general switch to OSX when I purchased the MacBook 2 weeks ago, however I still have quite a few Windows apps which I intend to use extensively in the future, games included. The prospect of using this thing without a power cord in XP seems unrealistic, because I can't imagine the power settings are at all finely tuned, instead first impressions leave me thinking things are quite crude in Windows -- far from the easy dual operability that Apple had me believe.
Any suggestions or responses to my ravings would be appreciated.

Thanks for the post. The issue I have with smcfancontrol (and I assume others do as well) is a)you have to start in OSX before booting to Windows to set the fan speed, and b) this isn't a very responsive solution, in that the computer isn't choosing the ideal fan speed based on temperatures, rather a program has set a minimum fan speed regardless of what the temps are from one point to another. I believe I have this correct with smcfancontrol, but if I'm mistaken, please, someone, correct me. I remain incredulous, because perhaps the main advantage of owning a laptop -- portability -- is rendered null because I can expect little more than 1 hour of very dry use in XP as a result of what I can only assume to be poor power management and rather clumsy fan/temperature control from the current Boot Camp drivers.
Message was edited by: MacAdamy
Message was edited by: MacAdamy

Origin location in a corrected image (using calibration data)

Hi there,
I am using the vision toolkit to correct deformation in images.
I am not using the dot grid template to let the software generate the calibration
map, but instead use a set of points (which I can precisely define
in the deformed image) and provide their respective "real world"
coordinates. I can then apply this correction to other images.
Up to now everything is fine.
Now I want to overlay two sets of images, which are deformed
differently (for instance, they represent the same object, but have
been imaged in slightly different conditions). I
can correct one set using the approach above, and the other separately, using
its own separate correction, but I am stuck there.
Each calibration/correction is characterized by a scaling factor and an
origin coordinate. I need both to be able to overlay the two sets of images.
I have chosen non-linear calibrations that preserves area and I figured a
way to recover the scaling factor by computing the areas of all the square
pattern in my set of calibration points (as computed in the original image), taking
the average and then the square root of this average area: this gives the
spacing between equidistant points in the corrected image.
However, I can't figure out how to get the location of the origin in the
corrected image. One of my calibration points is associated with position
(0, 0) in the real world. However, this is neither its position (in pixel unit)
in the original image or the corrected image. I need the latter. How can I
obtain it simply (I can think of sophisticated ways to obtain it, but I suspect
there might be trivial one).
Thanks in advance for your answer.
Sincerely,
X.
Solved!
Go to Solution.

Dear X,
I'm not sure if this is the information that you are looking for, but take a look in the Vision Concepts Manual, page 3-10
start»programs»National Instruments»Vision»Documentation»NI Vision»Concepts_Manual.pdf
"If you specify a list of points instead of a grid for the calibration process,
the software defines a default coordinate system, as follows:
1. The origin is placed at the point in the list with the lowest x-coordinate
value and then the lowest y-coordinate value.
2. The angle is set to zero.
3. The axis direction is set to indirect."
If not, I don't know of a good way to recover the transformation between an original image and a correct image for a specific pixel. It would be one thing if it were a simple linear calibration, but we don't have access to the algorithm used to apply the nonlinear correction, which changes based on the locations of the distortion in the image.
What are you looking for in overlaying the images? Are you doing a comparison?
I don't know the constraints of your project, but one thing you could try is doing a pattern or geometric match for a unique feature in both of the corrected images that you want to overlay (one you know the location of, and that will serve to align the images properly), and then define the coordinate system based on that match.
Hope that helps!
~Nate

Is this correct to use? wdr_task= client_window- get_parameter('parameter')

Similar Messages

Maybe you are looking for