Is this even possible with itunes

Hi everybody,
Just wondering if it were possible to see the album artwork change in itunes after you play the next song -- currently I have to reclick on the screen to see the album art work...
thanks a million

Sorry I should clarify -- the artwork is shown in the lower left corner but when i press the right arrow to change a song it shows the previous songs artwork and not the current songs artwork. Is there a setting so that it shows the current songs artwork during each song?
Thanks

Similar Messages

  • Is this even possible with Bridge?

    I do alot of work with Photoshop and some other products but am new to Bridge.  I've been tasked to use Bridge to find a specific type of TIFF file that is being generated by one of our legacy patient record systems.  It isn't in a standard TIFF format but some type of 8BPP format.
    Is it possible to use Bridge to find these type of files in a directory and search all subdirectories (about 500)?
    Any help would be really appreciated as I don't even know where to start.
    Thanks!

    It depends if that information is entered as a metadata point.  Click on picture and see if that has specific data in the metadata tab.  Also check the metadata in preferences to see if you have checked this data to be displayed.
    If so I believe you can search the "all metadata" in Find.  Type in the appropriate fields in search boxes.

  • Is this even possible with a selectManyCheckbox???

    I know I can do one of two layouts with a selectManyCheckbox, line or page. I would like to have the checkboxes go horizontally i.e. line, but after x number of them, say 5, I would like to start a new row rather than scrolling off to the right... I see that a selectManyCheckbox actually renders an HTML table so I tried to use the pass-through attribute "cols" to set it but no dice. Anyone have any idea how to do this or even if it is possible?

    I would say that you would have a device at the dsl first then connect everything else up that is needed. It would have to be wired to the dsl.

  • Is this even possible with Automator???

    I have a workflow that drains every bit of my memory and resources after it loops about 250 times in a row. I have to close out automator and then reopen it and the workflow to free up resources and continue.
    Is it possible to somehow have automator close itself and then restart itself?
    I'll gladly pay a pro to help me with a script or some help.
    Thanks

    Thanks Chris, you by chance in Los Angeles? I am. I'm not sure I understand. Are you saying, "do not do step 2 and step 6" and instead choose "command S"?
    If that's so, I have no "save as source" option. It pulls up "save page as" and gives the options of:webpage complete, webpage html only, text files and all files.
    I viewed each one and none will give me the source code. Even the "webpage html only" does not do it.
    By the way, the forward arrow is an embedded hyperlink on the webpage, that progresses you to the next page of what is over 100,000 pages. Easily!
    Any more ideas? I do currently (in step 6) have it paste to the same open word pad file. What I'm doing is very odd. I would tell you over the phone, but not on the boards. Listen, I'm willing to pay for some help, if you think you can help me.

  • Is this even possible with PSE 11?

    I am a long time user of PSE 2.  It lacks one functionality I would like to use: when I make a custom brush that uses multiple separate points, such as the ones shown at the beginning here: http://div.dyndns.org/EK/tutorial/froofy/, the brush has no pressure sensitivity.
    After discussing the problem with a friend who has PSE 8, and who was able to get pressure sensitivity with just such a brush, I purchased PSE 11.  To my dismay, the custom brush still lacks pressure sensitivity.
    Did I just waste eighty bucks?  Is it simply impossible to get pressure sensitivity with a multielement brush in PSE 11? (Fade does not count.)

    That was helpful, thank you.  Now I have pressure sensitivity.
    Unfortunately, now ALL my brushes have unremovable spacing, as seen in the image... but I was able to fix this by removing all presets, which is exactly how I fixed it in PSE 2.  This bug should NOT be in the program after fifteen years of updates.
    The good news is despite the image below, everything is now working fine.

  • Is this even possible with a Linksys product?

    I am doing an installation at a laundrymat and heres the situation:
    This gentleman currently has 1 DSL line coming into a Meraki wireless hub.  If you arent familiar with these, they have no out ports for hardwiring.  This hub takes his one DSL line and splits it on the out to two independent static IP addresses.  He uses one for personal that is secured, and one for wifi for customers to use.  He wants to add a DVR to the system that needs to be hardwired in to a network connection, which as I stated before, would be impossible (I believe) due to the fact there are no out ports on this router.  My question is this, is there a Linksys product that will maintain two seperate static IP addresses so that he can still maintain the 2 virtual lines coming out and also enable me to hook up the DVR?  
    Thank you in advance,
    Kevin

    I would say that you would have a device at the dsl first then connect everything else up that is needed. It would have to be wired to the dsl.

  • User Uploads - is this even possible with BC?

    For the sake of simplification, consider this potential site to be an art showcase site.
    I am looking to build a site where people can upload their artworks and have them displayed full-screen with captions about said art.  I've found an HTML template which works beautifully provided you manually upload images and adjust the HTML accordingly.
    So now, I want to let users create an account and get their own personal "site" for their art.  So far so good with BC, but now comes the part where I get stuck.  So far, all I can do is add single 'upload' fields to a form.  Problem is, they can have 1 image or 50 - I have no idea.
    Is there such a thing as a 'dynamic' upload app so they can upload as many images as they want?
    So they've theoretically uploaded 20 images.  They all go into the same 'userupload' folder though and get mixed in with everyone else's images.  Their 'site' will be a BC web app so it will already be in a subfolder on the server.
    Can user uploads in a web app be uploaded to a unique 'userupload' folder in that web app subfolder?
    So now 'X' number of images are saved in a unique folder for that user's web app.  Now I have to display those images on the page.  I can use the {tag_image1}, {tag_image2}, etc tags to provide the URL of the images in the HTML.  Problem is, the images are in a javascript list and I need to dynamically create that list of the correct length with the 'X' number of pictures the user has uploaded.
    {image : '/img/image1.jpg', title : '<h1>Title</h1><br><p>description</p>'},
    {image : '/img/image2.jpg', title : '<h1>Title</h1><br><p>description</p>'},
    {image : '/img/image20.jpg', title : '<h1>Title</h1><br><p>description</p>'},
    Can I count the number of images in a folder and generate the correct number of {tag} elements and also create a list in which to put that number of tags?
    Of course, the site doesn't have to follow the exact requirements above, but that's the idea.  Can I do any of this or something to the same effect in BC since I can't use PHP or anything else server side?
    Thanks!

    Hi there,
    - Every custom web app field you add as an image type field will become an upload field on web app creation But you are limited to the amount you create, say 20.
    - There is no dynamic upload.
    - There is one folder for the web app you set, there is no way of splitting the files up. But the associated files referenced to that user only. You can also associate custom CRM fields if you wish.
    - {tag_yourimage_value} Gets the raw path of an image.
    - You cant run read through a folder to generate the number of tags.

  • Is This Even Possible? eDirectory syncing passwords with external RADIUS servers.

    We are currently have a solution that allows us to use a campus RADIUS
    server as the authentication mechanism for accessing the Internet. We want
    to integrate this so users can authenticate with their campus IDs but gain
    access to the Novell server (home directory and printing) using the same
    information.
    Is this even possible?
    So, essentially, we would like the external RADIUS' user/password data to
    be synced with the eDirectory data, but have the eDirectory receive updates
    from the RADIUS (or LDAP, Kerberos or whatever system is necessary). Or is
    an all-Novell solution the only possible way to use RADIUS authentication?
    Any input would be greatly appreciated.
    -=Bryan

    Hi Bryan,
    As jim said, you can use idm to do this, but another option for you
    might be to use somthing like freeradius and point it back to
    edirectory as its authentication source.
    Cheers,
    Steve
    On Thu, 23 Feb 2006 15:50:11 GMT, [email protected] wrote:
    >Michael,
    >
    >Thanks for the info. I really wasn't sure where to post this question. I
    >really wasn't sure if I needed to be using Novell's RADIUS server or not to
    >do this. Reading the online docs didn't really help me to know which
    >solution or solutions to choose.
    >
    >-=Bryan
    >
    >> [email protected] wrote:
    >>
    >> > Is this even possible?
    >> >
    >> > So, essentially, we would like the external RADIUS' user/password data to
    >> > be synced with the eDirectory data, but have the eDirectory receive updates
    >> > from the RADIUS (or LDAP, Kerberos or whatever system is necessary). Or is
    >> > an all-Novell solution the only possible way to use RADIUS authentication?
    >>
    >> What you want should be possible with Novell Identity Manager (formerly
    >> DirXML) product. This particular forum is for help with the NetWare
    >> Radius server, which would not factor into what you are trying to
    >> accomplish... you have a non-Novell Radius server that you want to sync
    >> eDirectory information with, and that is the realm of identity manager.
    >>
    >> As to the "hows", you might as in the nsure-identity-manager group here.
    >>
    >> --
    >> Jim
    >> NSC SYsop

  • Everytime I try to download a song purchase from itunes I get the error message. 'Unable to Download Song' could not be downloaded at this time. I cannot even sync with itunes on the PC.

    Hi guys,
    I need some everytime I try to download a song purchase from itunes I get the error message. 'Unable to Download Song' could not be downloaded at this time. I cannot even sync with itunes on the PC.
    Kind regards
    Ian

    One correction, from the icloud I was not able to listed to the entire song.  So when you purchased the song if it wasn't downloaded to your library, chances are you have lost your opportunity to listen to it.

  • Since updating to iTunes 11.1.4(62) both my iPhone 5 and iPad Air do not sync.hen I plug them into my lap top directly, using the USB cord, they don't even register with iTunes as being present. I am completely stumped. I had no problem before.

    When I plug my iPhone or iPad directly into my lap top, using the USB cord, the devices don't even register with iTunes as being present. I am completely stumped. I believe this bagan with my last iTunes update. The last time I syced any device was Oct 23, 2013. During that time I bought two new apple products and the same problem, when I plug them in they do not even show up as being available to sync. Any ideas why this is happening?

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503
     Cheers, Tom

  • How is this even possible? Folders out of sync. Backlog command says in sync.

    Two 2008 R2 servers.  Been running DFS-R for about a year now.  Generally no problems.
    If I run the DFSRdiag backlog command on either server, for one particular folder, it says there is no backlog.  The only problem with that is;  on one server there are 11 files in that folder, on the other server, in the same folder, there are
    15 files.  How is this even possible!

    Hi,
    Please check if DFS Replication filter some special file from replication. For more detailed information, please refer to the article below:
    Exclude files or subfolders from replication
    http://technet.microsoft.com/en-us/library/cc758048(v=ws.10).aspx
    If the issue still exists, please create a Diagnostic Report to see if there is any error message.
    Create a Diagnostic Report for DFS Replication
    http://technet.microsoft.com/en-us/library/cc754227.aspx
    Best Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • HT1212 Ipad disabled. Won't even sync with itunes

    My son accidentally tried to change his password. he's 6. Says Ipad disable on the screen. Wont even sync with Itunes. Help?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • The "power search" yields no results whatsoever when i attempt to search. Is this a problem with itunes or my computer? Everything else seems to load just fine involving the itunes store.

    I am attempting to search for artists on itunes and for some reason it keeps telling me there are no results when I know I am tying in the correct artist. I have been trying this repeatedly and using different artists and song names and I am still getting no results. Is this a problem with itunes?

    The only thing I would be concerned about is.
    1st, Where did the media come from.
    2nd, Was it clean and free of scratches.
    Most of the CD&DVD Drives in Powerbooks seem to be very very picky about the media they like to play with.
    Always be carefull of the Source from where it came.
    Commercially produced Media is rarely a problem.
    It doesn't take much eiter to make them act silly.
    Good Luck....Don

  • PLEASE LET ME KNOW IF THIS IS POSSIBLE WITH FLUID GRID LAYOUT?

    This is an example of what I'm trying to do. Excel was the best way for me to provide a visual. Is this possible? Every time I try to place divs in a similar layout, the div will not take up multiple rows. For example div 4 would move down and where row 7 is would now be row 4. Div 2 would have also moved down because of 5. I have a large image that needs to be placed to the left of a header and vertical menu. I'm trying to keep the header and menu seperate and the image needs to be aligned to the top left of the text. I'm sorry that I'm overcomplicating this. I must admit it surprises me that the fluid grid appears to be dictated by rows. I'm wondering if for this particular design I should just stick to a table.

    I'm perplexing by your question.  How do you expect the divs to move in other resolutions?  For the question to be whether this is possible with a fluid grid there has to be some transformation between the layouts.  If you are just looking for a static layout, that is possible.  If the heights are to be fixed like that you could just specify the heights on the divs to make the height.  If the divs are moving down then add the attribute clear:none; to the div, in this case 2 and 4.  This will prevent the float from being cleared and pushing the element down.

Maybe you are looking for