Is this good or bad?

Question

I've been a BT Customer for about 6 years now ... just got my Home Hub 3, to replace my 2.0 Hub.
I've been having some need to reboot the hub for the past month, due to it just not being connected to the Broadband, this happened to the old HH2 and happens now and then to the HH3 too (notice the Connection time being only like just over an hour - cause I needed a reboot.
I noticed a lot of people post this screen, so here it is ... just wanted to find out if anything bad/good stands out!
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 01:37:58
Downstream:
4.898 Mbps
Upstream:
1.09 Mbps
 ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.3 Annex A
Latency type:
Fast
Noise margin (Down/Up):
8.8 dB / 6.4 dB
Line attenuation (Down/Up):
40.1 dB / 21.4 dB
Output power (Down/Up):
19.1 dBm / 12.4 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
28 / 33
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
32 / 8
Error Seconds (Local/Remote):
26 / 1

Answer 1

have you tried connecting to the test socket (with a filter) which is behind the bottom detachable half of the master socket. this is your direct connection to the exchange
have you removed the orange bellwire on terminal 3 from all your sockets?  http://www.filesaveas.com/jarviser/index.html
I know accelerator should do this but removal also works
if wireless is dropping you can try downloading inssider2 (istumbler if MAC) and then run it. This will show the broadcasting networks round about you and their channels including your own. If you then enter your router and change your wireless channel to a free or less congested channel.
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.