Is this how i control frame rate with IMAQdr property node?

Is this how i control frame rate with IMAQdr property node? if not, can someone point me in the right direction? for some reason, it doesnt work..
Attachments:
pic.JPG ‏75 KB

Please see this related thread http://forums.ni.com/t5/LabVIEW/IMAQdr-Property-Node/m-p/1642950/highlight/false#M590168
Matt
Product Owner - NI Community
National Instruments

Similar Messages

Multiplot waveform graph plots are different colors when set to be the same with a property node.

The graphs were working yesterday. I made a few changes to another part of the block diagram and now the graphs do not plot all of the plots the same color. I am using a for loop with a property node with the elements active plot connected to the iteration terminal, and plot color to a color box. My for loop increments programmaticaly from another part of the code to create plots as it runs. I have replaced the graphs with new ones and they will work sometimes.
I am using Win2k and LV 7.1
Thanks,
Brett

Hi bh3560,
Have you tried chaging the color by right clicking on the line in the plot legend. There is an option to change the color of the plot.
Brian K.

Can you adjust the frame rate with quicktime?

I need to slow the frame rate on an .avi file, and I can find how to do that in big chunks, but how to fine tune. Is this possible on the latest release (just downloaded it) and if not can someone tell me what I can use to change the framer ate on the .avi itself (either way is fine)
I am SO not tech savvy so please assume you are replying to an idiot but thank you very much in advance for any help.

p.s. I discovered that holding the option button and the fast forward give me this control for speeding things up, but I can't figure out how to slow it down - sorry for the missing info

Low Frame rate with new Apple TV.

Hi,
I just watched a purchased TV show (Top Gear) on my new Apple TV, connected to a 42" flatscreen, and I am not impressed at all with the quality. Apart from the resolution, which we all now, the image is jittery, and the frame rate is so low that when somebody moves his arm you can wee it jump from one frame to another.
Looked at settings on my TV (Sony Bravia) to see if there is something there, but I don't see any setting that might affect this.
Anyone else has this experience?
Kind Regards,
Erwin

Same issue with a British movie I just tried to stream and I didn't think this would help, but it worked like a charm! Definitely the cinemotion. I didn't even know I had that setting. It's way to the left under picture in my Bravia onscreen menu. Just make sure that you turn it off for the correct input. Im more used to using the motion enhancer toggle under options, but that wasn't it.

How to control transaction isolation with tjdo + jboss

When running TJDO (a jdo-implementation) in conjunction with JBoss, tjdo's PersistanceManagerFactory is created by jboss as a service and can be retrieved using jndi when needed.
This tjdo is configured by a file tjdo-ds.xml in the deployment directory. Does anybody know if it is possible (and how) to control the transaction isolation level of tjdo in this case? The default is serializable, but experience indicates that using read_committed should be more useful if Oracle is used as database.
Best regards
Karl Brodowsky

this can be achieved by using
<config-property name="TransactionIsolation" type="int">2</config-property>

What is frame rate with 1920x1080/60p?

I'm currently shooting and editing HD 1920x1080/60i (interlaced format, 29.97 frames/sec). To reduce motion artifacts, I'm considering a change in my workflow to HD 1920x1080/60p (progressive format), but first I must update my understanding of this newer format. Question 1: What is the frame rate for this format, 30 or 60 frames/sec? If the answer is 30 frames/sec, why is it called 60p? Question 2: How many complete scans (combining odd and even lines) are produced per frame? Question 3: Would a Master File exported from Final Cut Pro X (by default, a QuickTime movie file) be progressive or interlaced? Question 4: Would iDVD v.08 accept a progressive movie file for making standard DVDs?
Your answers to these questions are very much appreciated.

Thank you, Tom Wolsky and Karsten Schlüter, for your fast replies!
Tom, regarding my Question 4: Are you sure that the latest version of iDVD can accept progressive 1920x1080 QuickTime movie files at 59.94 frames/sec? As you may know, iDVD is no longer supported by Apple, and their Technical Support is unable to answer my question. I respect your experience in this area and would like you to advise me in my proposed switch to a progressive workflow. I can't afford to shoot in a format that will not allow me to make standard DVDs.
Best regards from Interlacer.

Slow frame rate with Prosilica SmartCam

Have here a Prosilica AVT GT1600C and a very slow frame rate...
Here are my .icd information.
I tried to cope with the balance between the ExposureTimeAbs and AcquisitionFrameRateAbs but dont help.
The .icd file is attached (renamed to .txt), installed version: Vision 2013f2
Does some of the vision cracks find some optimizing issues?
thx in advance
Attachments:
Allied Vision Technologies GT1600C.txt ‏12 KB

Ah well, yes... the variables/options are:
lighting - this is the most commonly overlooked, and often the easiest to fix; use/buy more/better lighting!
lensing - be sure you select a good quality lens (a good lens is more expensive but passes light better), and that the aperture is open as far as possible (unless you have depth of field issues)
exposure duration - as long as possible relative to framerate desired or to prevent blurring if motion involved
use of gain - this should be a last resort as "noise" increases with gain... but slight use of gain can be helpful under marginal lighting conditions
Regards,
Scott

Low frame rate with mac to pc video chat

I have a mac with isight using Ichat and 10.4.3. My brother has XP with AIM 5.9 with the latest and greatest Logitech USB 2.0 webcam.
We are able to connect and start a video chat. We see each other. The frame rates from the isight are great on both ends. However, the frame rates from the logitech are about 1 fps on both his computer and mine. We have tried adjusting settings and installing the AIM patch that was referred to in one of the articles.
what to try next.
thanks in advance

No Problem.
New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
Alternatively, you can change the status to Answered.
If we use the forums properly they will work well...
Ralph

NVidia GT 120 and intermittent low frame-rate with Expose, Dashboard...

I have an iMac early 2009 with a NVIDIA GeForce GT 120 (256 Mo) graphic card.
I have intermittent low frame-rate problems with Expose, Dasboard and several other large animations...
For example, when I trigger Expose or Dashboard, the animation may sometimes be choppy (with few intermediate images) to very choppy (practically no intermediate images)...
The second after, the same animation may feature a very high frame-rate...
Neither Apple diagnostic tool nor TechTool Deluxe finds any hardware problem.

I have the same iMac, and also have this same problem.
When I first activate Dashboard, the animation is choppy. If I activate it several times in a row very quickly, the animation smooths out noticeably. It's as though the video card is asleep, or cycled down, and then wakes up and springs into action.
This is testable. If I run the command line utility OpenCL Bench immediately following a restart, my iMac's GT 120 gives a time of 14 seconds. If I open iTunes, turn on the visualizer, and then run OpenCL Bench again, the GT 120 gives a time of 1.7 seconds! If I turn off the visualizer, wait a few seconds, and re-run OpenCL Bench, the GT 120's time increases to 5.6 seconds.
The same performance increase/decrease shows up with Dashboard. If I open Dashboard with the iTunes Visualizer running, right off the bat, Dashboard's animation is very smooth. If I turn off the visualizer and wait about 30 seconds, Dashboard's animation is back to choppy.
This is not dependent on the iTunes Visualizer. I can have the "OpenCL Procedural Grass and Terrain Example" running, for example, and get the same results from OpenCL Bench and Dashboard.

STO- How to control Over delivery with batch split?

Dear All,
In STO Scenario, how to control the over delivery?
I created a PO for the Intra Company stock transfer & Delivery created in the Background with the T Code VL10B. When I am doing picking using T code VL02N, the system is allowing to add more than PO Quantity in batches and system displaying the warning message (Specified quantity is greater than the open quantity/Message no. VL287) & allowing to save the deliver document..
Hence plz suggest how to restrict the same.
Hope it is clear.
Thanks & Regards
varun

I am also in the same boat.
I searched the forum and got the link STO - How to control Over delivery ?
I checked OSS notes 548914, 386340,215488 but to no avail.
I suggested user exit USEREXIT_SAVE_DOCUMENT_PREPARE in include MV50AFZ1 to my technical team for finding the resolution. So far it is still on hold.
If you come across any other solution, you can update the forum so that it would be helpful for many others.
Regards,

Change frame rate with no slowdown (Premiere Pro)

Hello, I am making a project and need to re-create a film in the style of a silent film, the most common frame rate for silent film is 16 fps. Is there anyway in the post production stage to change the frame rate of the video to 16 from 29.97 without making the clip longer?

See if you can get the look you want by experimenting with the Posterize Time effect. Leave the frame rate alone.
Cheers,
Jeff

How to change frame rate on JPEGS

I have some downloaded JPEGS from stock photgraphy. I realized that they are all at a frame rate of 29.97.
My footage and timeline in FCP Studio is 59.94.
Should I use Compressor for JPEGS? Is it necessary at atl?
I noticed that there is an orange line when I insert a JPEG and thought matcing the frame rate would elminate that and
avoid other problems.
Thanks!

Stills don't have a frame rate. They are stills. FCP will SAY they have a frame rate in the bin...for some odd reason. The stills inherit the frame rate of your EASY SETUP. So even if you have a 59.94 sequence and media, if the project Easy Setup is 23.98, the JPEG will say 23.98. But since every frame is exactly the same, as stills aren't moving footage...they are stills...you won't have any issue with them.
You will always have to render stills. But the larger in pixel size and data size, it can go from a green render to an orange one. But stills will always have to be rendered. Because they aren't media...moving QT footage...until you create a render file for them.

How do I use the Index Values property node with a multidimensional array.

I am using a 2D array to store operator inputs on my front panel. I only want to display one element to the operator at a time. I am trying to use the Index Values property node to change the displayed element. However, I can only get the Rows index to work. How do I direct the Columns index as well? The help says to use one per dimension. I need clarification on what this is talking about. I've tried adding a second element to the property node, 2 seperate property nodes, and diferent wiring techniques. (series, parallel)

If you only wire up one of the inputs (col or row) what you get out is a 1D array of either the column or row. If you wire controls to both, then you will get one element out of the array. Getting a single element in a 2D array requires you to specify both a row and column.
Message Edited by Dennis Knutson on 02-08-2007 08:34 AM
Attachments:
Index 2D Array.PNG ‏2 KB

Control text with a property node

Hello all,
I have an application where I need to change the text displayed on the screen. This is not a text control, or indicator, nor is it any other "obect" in the controls palette. This is just plain text (press shift and right click to enable writing text). I've seen this done before, so I know it can be done. I did it myself a couple years ago, but that example was lost to a drive crash. It involved somehow getting the refnum of the text, or something like that, and using a property node to change it. Does anyone know exactly how this is done in LavVIEW 7.0?
Thanks.
Rick

Here's a way to do it (LV 7.0). You should clean up the code to make sure references are closed, etc.
Attachments:
Change text.vi ‏21 KB

How do I get the DSR state property node to correctly read?

I can toggle the DTR line high and
low using a property node for the serial port, modem line settings, DTR line state, and it works fine. However, I cannot get the DSR line to
read properly. Seems to go to unasserted no matter what the input is (and I've verifed the input). I've turned handshaking on and jumpered DTR to DSR (pin 4 to 6 on DB-9), but the DSR line will not read correctly. I'm using 6.1 with Windows 2000.

Here's a simple version. Writes and reads to itself fine, and can toggle the DTR high and low. DSR is always unasserted. Thanks for your help.
Nick
Attachments:
CommProgSubset.vi ‏85 KB

Is this how i control frame rate with IMAQdr property node?

Similar Messages

Maybe you are looking for