Is this just a LVDS cable problem? Help please
http://img.auctiva.com/imgdata/1/1/3/1/9/0/5/webimg/371736702_o.jpg
I was told that this could just be a LVDS cable problem, but I've also read it could be a logic board problem. Any help would be appreciated.
OK, the above was the report after the MacBook had been plugged in for a few days. I decided to see what came up when I started on the battery, but the first time I tried it, as soon as Safari launched (it's a login item) it went down. So I let the battery get back up to 100%, and restarted, bypassing login items. System Info reported this:
Battery Information:
Model Information:
Manufacturer: DP
Device Name: ASMB013
Pack Lot Code: 1
PCB Lot Code: 0
Firmware Version: 102
Hardware Revision: 300
Cell Revision: 200
Charge Information:
Charge Remaining (mAh): 4120
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 4273
Health Information:
Cycle Count: 37
Condition: Normal
Battery Installed: Yes
Amperage (mA): -2054
Voltage (mV): 10705
I note that those last two items are quite different, and indeed, the voltage had been reduced to < 11V. Dunno if that's significant.
I then tried launching Safari and it promptly went down. It occurred to me that the issue might involve Safari specifically in some way, so I let the battery charge back up again, de-logined Safari, and restarted. I was able to launch a few smaller applications; then I launched Backup, so far so good, but when I tried actually starting a backup, poof.
It's too bad I can't either find a MacBook to borrow to try with my battery or borrow a battery; no one I know has an appropriate model MacBook.
Similar Messages
-
My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.
By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position! -
PSE11 and 12 will NOT display a JPG i open..... this just occured- have no idea why - please help??
PSE11 and 12 will NOT display a JPG i open..... this just occured- have no idea why - please help??
All JPEGs or a particular one?
-
after mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please are there any settings i need to alter as it seems the wav or mp3 file i ceated is being converted to a data file somewhere between the folder and disc drive
Same thing for a movie file.. If you want to play back the movie via a DVD and a DVD player you must create a Movie DVD and not just burn files to a data DVD... as Data DVDs are just storage devices for files and therefore will only work with computers...
Movie DVDs are special formats that include things like menus and special file formats.. so they can playback via a DVD Player...
You will need a 3rd party DVD Burning app like Toast which is what i actually use.... or the more popular DVD Creator app...to create and then burn a Movie DVD that will playback on a DVD Player....
https://answers.yahoo.com/question/index?qid=20101220205435AA70beb -
I just upgraded my operating sytem to 10.6.8, to accomadate my sons new ipod which worked fine , but on plugging in my iphone 4 , itunes doesn't rcognise my phone , just says no camera found, help please.
Try Here > http://support.apple.com/kb/ts1591
-
I am trying to use mail merge in Word for Mac on My brand new MBP 13". And I get the error "there is not enough memory or disk space to convert this document". What gives? Help please!
Why do I get there is not enough memory...: Apple Support Communities
Error message in MS Word opening a .docx file "There is not enough - Microsoft Community -
im trying to buy a film from i tunes, and i put in all my card details corectly, but im just going round in circles help please?
Perhaps if you were to explain what is happening, then someone could help.
-
Everytime when i slide down to my notifications, it freezes of what im doing, AND when i go to my messages, there's nothing and it's just blank. I Need help please?
The next best suggestion I have is to back up your device in itunes and restore the software back onto your device. It sounds like you might have had a error when downloading the software update.
http://support.apple.com/kb/ht1414 -
Help please. I cannt get itunes match to work. It just stops on the first step and the status bar continues to say "sending information to apple" for hours. Any ideas?
I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.
-
Just bought new AirPort Extreme did everything on manual and light still flashing amber , it is connected to an Arris TM822 from optimum cable company , help please
Any luck with the suggestions mentioned by Bob Timmons?
I am having pretty much the same issue.
Got a new modem Arris SB6141 and a new Airport Extreme ME918LL/A. Activated with my ISP (Comcast). Worked with a savy tech who knew the modem and Airport Extreme. Ensured all items were correct from the ISP side.
I follow the instructions as indicated for Airport Extreme by it fails to detect the internet and dns servers. Comcast suggested I call apple. Reading posts above I will:
-Reset the airport extreme
-Unplug the modem for 30min
Airport Utility 6.3.4 (634.17)
Airport Extreme ME918LL/A Firmware Version 7.7.3
MBP - Yosemite Mid 2012
Appreciate the assistance folks. -
VIRUS PROBLEMS, HELP PLEASE???
I continue to have messages popping up saying my computer is infected. It wants me to cleanup and I have to register with Mac Shield 2.6. Pronograhic websites keep popping up. Anyone having this problem? Did not have this problem yesterday, but it's here today! There is also a Red Sheild on the top of the toolbar where it shows the time, battery life, etc. Right clicking on the sheild drops down Scan Now, Cleanup, Control Center, Scan, System Info, Settings, About, and Register. A pron site just popped up again! Need help Please!!
Fuony wrote:
The Mac Shield malware can come through Firefox too if you allow it to and you click on it!
Your exactly right, it is possible that if you visit a site and need the scripts to run for something that the malware that uses Javascript is on that site, then your going to be presented with it.
The thing is with the Firefox + NoScript combination defeats alot of the web side trickery the malware authors are using to get the malware to appear in the first place.
Also this "MacDefender" isn't the only malware making the rounds. There are some serious Flash vulnerabilities being hosted on hostile/adult websites that are running scripts for no apparent reason other than to try to infect your machine.
By running all scripts all the time, your computer is in a state as if you tried running across a busy highway blindfolded.
As a lifelong "MacHead" I can understand Apple loyalty, but if Apple isn't cutting the mustard on their browser security, rather place their users security at serious risk for the sake of convenience, then I have to think about using and recommending to others something else that is more secure.
As a example, I surf thousands of web pages a day, some on really nasty sites, yet I haven't seen this "MacDefender" appear on my computer. Even when I purposely visited links that people have submitted that had the malware. (I maintain a couple of bootable clones of my boot drive just in case) -
Soundtrack problems - help please
Help please. I tried doing a send to multi-track project from FCP with the base layer video option and kept getting the 'error sending selection to Soundtrack Pro' message. I did a search and the suggestion is that I have no disk space but I have over 600GB!
Then I tried a send with the full video and the file saved okay. However when I try to open the .stmp file, Soundtrack Pro starts and then freezes. I've tried opening in various ways.
Help please, I just cannot figure this out! What am I doing wrong?Not sure how much help this is, but since you're having problems with the layout, did you try deleting the layout file? MacintoshHD/users/username/Library/Application Support/Soundtrack Pro/Layouts
BTW, I found a BKiLifeConfiguration.plist in the following path:
MacintoshHD > Library > Application Support > ProApps > Internal Plug-ins > BrowserKit > iLife.bkplugin > Contents > Resources
Do you find it there? -
SQL INSERT problem - help please
Hello,
I'm having a problem with INSERT statement.
There is a "ShowFinal.jsp" page, which is a list of candidates who selected from the second
interview. The user picked some candidates from the list and conduct the 3rd interview. After
he check suitable candidates(who are selected from the 3rd interview) from the list , enter
basic salary for every selected candidate, enter date of interview and finally submit the form.
These data should be save into these tables.
FinalSelect(nicNo,date)
EmpSalary(nicNo,basicSal)
In this "ShowFinal.jsp" page, it validates the following conditions using JavaScript.
1) If the user submit the form without checking at least one checkbox, then the system should be
display an alert message ("Please select at least one candidate").
2) If the user submit the form without entering the basic salary of that candidate which was
checked, then the system should be display an alert message ("Please enter basic salary").
These are working well. But my problem is how to wrote the "AddNewFinal.jsp" page to save these
data into the db.
Here is my code which I have wrote. But it points an error.
"AddNewFinal.jsp"
String interviewDate = request.getParameter("date");
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");
String sql ="INSERT INTO finalselect (nicNo,date) VALUES(?,?)";
String sql2 ="INSERT INTO EmpSalary (nicNo,basicSal) VALUES(?,?)";
for(int i=0; i < value.length; i++){
String temp = value;
for(int x=0; x < bs.length; x++){
String basic = bs[x];
pstmt2 = connection.prepareStatement(sql2);
pstmt2.setString(1, temp);
pstmt2.setString(2, basic);
int RowCount1= pstmt2.executeUpdate();
pstmt1 = connection.prepareStatement(sql);
pstmt1.setString(1, temp);
pstmt1.setString(2, interviewDate);
int RowCount= pstmt1.executeUpdate();
Here is the code for "ShowFinal.jsp".
<form name="ShowFinal" method="POST" action="AddNewFinal.jsp" onsubmit="return checkEmpty() &&
ValidateDate();">
<%-- Loop through the list and print each item --%>
<%
int iCounter = 0; //counter for incremental value
while (igroups.hasNext()) {
Selection s = (Selection) igroups.next();
iCounter+=1; //increment
%>
<tr>
<td style="background-color:ivory" noWrap width="20">
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>"
value="<%=s.getNicno()%>"></td>
<td style="background-color:ivory" noWrap width="39">
<%= s.getNicno() %> </td>
<td style="background-color:ivory" noWrap width="174">
<input type="text" name="<%= "basicSal" + iCounter %>" size="10"> </td>
</tr>
<%
%>
Date of interview<input type="text" name="date" size="17"></td>
<input type="submit" value="APPROVE CANDIDATE" name="B1" style="border: 1px solid #0000FF">
</form>........................................................
Here is the error generated by TOMCAT.
root cause
java.lang.NullPointerException
at org.apache.jsp.AddNewFinal_jsp._jspService(AddNewFinal_jsp.java:70)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
I have goto the file "AddNewFinal_jsp.java". The line 70 points to the following line.
for(int i=0; i < value.length; i++){ [/b]
Please can someone help me to solve this problem? Please help me to do this task.
Thanks.Hi Casabianca ,
It is clearly that your problem is not on the database end, more like a servlet/jsp issue.
I will not comment on the javascript portion, but rather the 2 jsps.
a simple way to trace what's go wrong is to check the final result (the html code) of the first jsp (showFinal.jsp), and compare against what is expected by the 2nd jsp (AddNewFinal.jsp). Most browser do provide "view source" on the page visited.
the following code
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>" value="<%=s.getNicno() %>">
<input type="text" name="<%= "basicSal" + iCounter %>"
would likely to be "translated" to html code something as follow:
<input type="checkbox" name=""ChkNicno0" value="nicNo>">
<input type="text" name="basicSal0">
the original code in "AddNewFinal.jsp" using
request.getParameterValues("ChkNicno");
which looking for a none exist http request parameter (sent as "ChkNicno0",etc but look for "ChkNicno"), which has explained before.
the second attempt to use String[] value = request.getParameterValues("ChkNicno" + iCounter); give Cannot resolove symbol :iCounter. because iCounter never defined in the 2nd jsp!
Most of the error message do give clue to cause of error... : )
not too sure on your intension, assume you wish to update only those selected (checked) row to db.
some suggestions:
1) <input type="text" name="ChkNicno" size="10"> </td>...
<input type="text" name="basicSal" size="10"> instead.
then use javascript to based on checked element index (refer to javascript spec for more details), for those index not checked, clear off the correspond index "basicSal" field value.
e.g. ChkNicno[1] is not checked, empty basicSal[1] value before submission.
This will give us only selected rows values.
2) retain the code
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");at 2nd jsp, as now the http request will pass parameters using "ChkNicno" and "basicSal".
3) some change to the code for optimization
for(int i=0; i < value.length; i++){
String temp = value;
for(int x=0; x < bs.length; x++){
String basic = bs[x];
pstmt2 = connection.prepareStatement(sql2);
pstmt2.setString(1, temp);
pstmt2.setString(2, basic);
int RowCount1= pstmt2.executeUpdate();
pstmt1 = connection.prepareStatement(sql);
pstmt1.setString(1, temp);
pstmt1.setString(2, interviewDate);
int RowCount= pstmt1.executeUpdate();
to
pstmt1 = connection.prepareStatement(sql);
pstmt2 = connection.prepareStatement(sql2);
for(int i=0; i < value.length; i++){
String temp = value;
for(int x=0; x < bs.length; x++){
String basic = bs[x];
pstmt2.setString(1, temp);
pstmt2.setString(2, basic);
int RowCount1= pstmt2.executeUpdate();
pstmt1.setString(1, temp);
pstmt1.setString(2, interviewDate);
int RowCount= pstmt1.executeUpdate();
preparestatement created once should be sufficient as we do not change the sql statement throughout the loop.
there are better solutions out there, this just some ideas and suggestions.Do try out if you wish.
Hope it helps. : ) -
Hibernate-very strange problem, help please
Hi, i got such a strange problem that im sure you ll think im doin crazy talk :) , i dont see why this would happen at all, i have a class called "Package", mapped to a table "package". whenever i do a query on this table using hibernate, even the simplest "find all" kinda of query, hibernate does update on the table b4 doin the query! even more weird, it does the update when the first query on this table happens, it deletes all values of a column (yes only this column); then if i do the same query again, no update at all. however if now i mannuall add those missing values, it does the update again and deletes them! sry its confusing, heres my code and more of wat i done:
The mapping Package.hbm.xml
<hibernate-mapping package="tuition.bo">
<class name="Package" table="package">
<id name="id" column="study_package_id" type="long">
<generator class="sequence"/>
</id>
<property name="name" column="name" not-null="true"/>
<property name="satTiming" column="sat_timing" not-null="false"/>
<property name="satSubjects" column="sat_subjects" not-null="false"/>
<property name="sunTiming" column="sun_timing" not-null="false"/>
<property name="sunSubjects" column="sun_subjects" not-null="false"/>
<set name="classes" inverse="true" cascade="delete-orphan" lazy="true">
<key column="package_id"/>
<one-to-many class="Class"/>
</set>
</class>
</hibernate-mapping>
For example initialy i populated database using hibernate, like this:
package_id, name, sat_timing, sat_subjects, sun_timing, sun_subjects
1 no.1 9-12 business 9-12 law
2 no.2 9-11 business 9-11 law
Then after i populated this database, i did this query:
<b>List res=getHibernateTemplate().find("FROM Package");</b>
and you can see the log file as such: (excerpt)
16:23:06,687 INFO TransactionFactoryFactory:31 - Using default transaction strategy (direct JDBC transactions)
16:23:06,703 INFO TransactionManagerLookupFactory:33 - No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended)
16:23:09,968 DEBUG JDBCTransaction:46 - begin
16:23:09,968 DEBUG JDBCTransaction:50 - current autocommit status: true
16:23:09,968 DEBUG JDBCTransaction:52 - disabling autocommit
<b>16:23:10,640 DEBUG SQL:324 - select</b> studypacka0_.study_package_id as study1_, studypacka0_.name as name12_, studypacka0_.description as descript3_12_, ....... from _3AT_package studypacka0_
Hibernate: select studypacka0_.study_package_id as study1_, studypacka0_.name as name12_, studypacka0_.description as descript3_12_, studypacka0_.day as day12_, studypacka0_.sat_timing as sat5_12_, studypacka0_.sat_subjects as sat6_12_, .......
16:23:10,734 DEBUG JDBCTransaction:83 - commit
<b>16:23:10,796 DEBUG SQL:324 - update</b> _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
Hibernate: update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
<b>16:23:10,812 DEBUG SQL:324 - update </b>_3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
Hibernate: update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
<b>16:23:10,812 DEBUG SQL:324 - update</b> _3AT_package set name=?, description=?,
16:23:10,953 DEBUG JDBCTransaction:173 - re-enabling autocommit
16:23:10,953 DEBUG JDBCTransaction:96 - committed JDBC Connection
as you can see, it does update and changed table field values to this:
package_id, name, sat_timing, sat_subjects, sun_timing, sun_subjects
1 no.1 business law
2 no.2 business law
---------- all tiimings are gone. and now if i re-do the same query, there are NO UPDATE operations....howver if i add some values to sat_timing, sun_timing, and re-do the query, very surprisingly, i saw those update operations which delete all timing values again!
im totally lost... i havent changed any config, this doenst happen to my other classes at all but just this one.... any ideas please! even some thought of what may caused this would be great help! thank you!well i got the setters wrong.... being so stupid i am... sry for creating such a long and massy thread.
-
My 3000H will no longer connect to the internet via my cable modem - help please.
I have 3 computers and a media server on a Linksys router with a Comcast cable modem. Everything AOK. 3 weeks ago my Lenovo 3000H shut down and rebooted for no reason. Then I began getting popups while I was on the internet saying that I needed to click on a button to make a dial-up connection. I would hit X or Cancel to make it go away. It happend more frequently and other related popups started, but I could close them and continue normally. Last weekend It happened again but I lost my connection to the internet and it would not reconnect. Now I get a big error message "Connecting through Wan Miniport(PPPOE)... Error 815: The broadband netowrk connection could not be established on your computer because the remote server is not responding. This could be caused by and invalid value for the "Service Name" field for this connection. Please contact your ISP and inquire about the correct value for this field and update it in the Connection Properties..
I called Comcast. They don't have a clue what Error 815 is. I have changed every cable, rebooted the modem, router and all computers countless times, and reset the modem per Comcast. I have taken the router out and connected directly into the Lenovo. I have gone through every screen related to broadband connection to no avail although, being a beginner, I see screens that I have no clue what they do.I have a couple of friends and a Comcast fellow who tried to walk me through the steps they thought would restore my connectio. No luck.
Can anyone walk me through the necessary steps to get me back to ground zero and then through the steps to reestablish my broadband connection?
Help Please?Emma-
In Safari, press on the Bookmarks icon and select History. Then press on Clear History at the top of that menu, and see it there is any improvement.
If not, try unplugging your WiFi router for a few seconds. Then reset the iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will need to reconnect the iPad to WiFi.
Fred
Maybe you are looking for
-
New harddrive, now iPhoto won't open
The harddrive in my PowerBook G4 had to be replaced (again) but this time I thought I was smart because i had been using Backup to backup my stuff to an external harddrive on a regular basis. Now iPhoto won't open because it says: "You have made chan
-
Dear Guru's Please find my query mentioned below....... QUERY: We are using Taxinn as a procedure Scenario: Same vendor same material same plant I want to create 2 Seperate PO 1) With Zero Excise duty 2) With 16 % Excise Duty How to Solve this Quer
-
Hi, How to setup a session variable of User id in PHP in Dreamweaver Style. Is it possible to assign the session variable value equal to user id from the recordset......if yes i need the procedure. Thanks in advance.
-
Installing program runtime error
I am trying to install updated driver for HP printer photo smart c7200 series. I get a runtime error. I have downloaded the driver several times and it gets the same error every time. When I try to activate the printer and fax app it says it can't fi
-
I have not been able to get Family Sharing to work well with my child. I have set up Family Sharing where I am the organizer, my wife is a parent/guardian, and my kids are also in as family members. My youngest is under 13, so I set up an @icloud a