Is this perhaps a bug in iPhoto?

A picture I didn't edit appeared in the edited folder somehow. Now I'm trying to clear the folder but the photo will not delete no matter what I do. When I try to revert it to original, it's not highlighted so that's not gonna work. I know I didnt add captions so don't know what else to do. Its not being used in any other way except that i did upload it to Facebook. This is not new it's happened before, but only to photos I've actually edited. What I ended up doing a couple of times was delete iPhoto on my IOS and reinstall it. Seems though every time I use iPhoto this happens.

Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on iPhoto for iOS until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.

Similar Messages

Bug in iPhoto v6 when using Mail

Bug in image quality when sending photos with Mail.
Description:
I click on Email icon in iPhoto, and then choose Medium as the quality, that's when iPhoto tells me that the Photo Count = 1, and Estimated Size = 122Kb. And then the Mail app opens, and I see the same photo inside the message composition window, and now Mail tells me that the Message Size = 55Kb (on the status line at the bottom). And When I send that photo to myself, I receive a photo which is about 40Kb in size, and the photo looks just terrible... how can it look good at 640x480 with only 40Kb?
Is this a bug, or I can change the jpeg quality somewhere? My friend has a 2-year old iMac with iPhoto 5 and when she sends me pictures the same Medium size they are closer to 100Kb each
We did a little test: I sent her the same photo in original size, and then she sent me back the Medium Size, and it was around 90Kb. How can I fix/change this, or am I cursed by this BUG in iPhoto v. 6? or a bug in Mail?
Thanks.
MacBook Pro 2.4 GHz Mac OS X (10.4.10)

Misio:
Even though iPhoto said the final size would be 122 KB for a medium size, my test, a 4.2 MB file came in at 68 KB. Another test with a 2 MB file was estimated at 122 KB but came in around the 68 KB size. I think the 122 kb value is hard coded into the application as an approximation only before compressing and not really a bug. Maybe a poor approximation, however.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

I think this is a Bug of String class

I think this is a Bug of String class, do you agree with me ?
String s = "1234........"; // when "1234........". length() > 65535, there will be wrong, but
char[] c = new char[88888];...
String s = new String(c);even if c.length >65535�Cevery thing is ok.
so I think is a bug. Somebody give me a answer, thanks

below is the two Constructors Of String
    public String(String original) {
     int size = original.count;
     char[] originalValue = original.value;
     char[] v;
     if (originalValue.length > size) {
         // The array representing the String is bigger than the new
         // String itself. Perhaps this constructor is being called
         // in order to trim the baggage, so make a copy of the array.
         v = new char[size];
         System.arraycopy(originalValue, original.offset, v, 0, size);
     } else {
         // The array representing the String is the same
         // size as the String, so no point in making a copy.
         v = originalValue;
     this.offset = 0;
     this.count = size;
     this.value = v;
    }=====================
    public String(char value[]) {
     int size = value.length;
     char[] v = new char[size];
     System.arraycopy(value, 0, v, 0, size);
     this.offset = 0;
     this.count = size;
     this.value = v;
    }I don't know where has the problem.

Bug using iPhoto on Macbook Pro Retina

Hi Guys,
First post.
I have the new Macbook Pro Retina 13"
Whenever I use iPhoto, as soon as I go to another program and come back it takes me to "Last import" folder regardless of where I was.
Is there a fix for this bug? It's really annoying

Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
and select the library you want to add from those in the selection window.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
If the new library doesn't work properly try this:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
In either case your current library will be untouched for further testing if necessary.

Is this a known bug (copying text freezes up APE)?

I have had this happen to me several times now, and am now pretty sure what causes it:
APE freezes up, becoming totally unresponsive. I can't even shut it down (both Organizer and Editor) via Windows Task Manager (Ctrl+Alt+Delete).
What gets me to this juncture? When I try to rename an image, and have a series with the same base name (such as GoingOverNiagaraFallsInaBarrelOfMonkeys, as in:
GoingOverNiagaraFallsInaBarrelOfMonkeys1
GoingOverNiagaraFallsInaBarrelOfMonkeys2
etc.
...and I copy the "base" portion via Ctrl+C -- voila! Everything stops dead in its tracks as if a 900-lb. Grizzly Bear in a bad humor swatted my CPU.
Is this a known bug?

when I select all the text in a description (FIle | Info, Description text box on first tab) and copy it, it freezes up (eventually it recovers, though).
I can't reproduce that with my PSE 8. Perhaps there's something specific about one or more of your photos that's triggering the problem -- attach one of the problem photos to your reply (use the Web form, not email), and I'll see if happens with my PSE 8.

Calendar adds an extra day when creating an event in ios 8.1.3. Is this a known bug?

When i add an event using the calendar app in ios 8.1.3, it adds an extra day to the event when using a range of dates. I am able to recreate the problem. when entering the event i select a range of dates and confirm that it is what i want. after submitting, i verify and it has added an extra day at the end. Is this a known bug or am i on my own? Help please. this is annoying having to check each event after entering it.

Ive reset, restored and this is the second phone. Thought it maybe a wonky screen that would shift it while setting dates. THe only thing I can think of is that I am syncing with google calendar, but it only happens when setting events in ios not if i do it from google website on desktop PC.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

Hi j,
I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin.

In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
os x, Mac OS X (10.6)

I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum.

Project explorer doesn't show callers for .rtm (run time menu) files (is this a confirmed bug?)

Maybe I was to quick to report this as a bug... I was unable to find anything related to it at my normal sources of information. Does someone has exeperience with it?
I have a work-around and this is included in the description :
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=6776 (message 25)
** Original post **
When a library (.lvlib) that contains a file with a run-time-menu (.rtm) file is removed from the project, but there is still a file that uses this .rtm file, both the .lvlib and all of it's vis and the .rtm file are displayed in the project Dependencies.
For the Vi's the callers can be found by 'Find->calllers'. For the .rtm file this always results in 'No items found' but the .rtm file remains in the Dependencies (as it should since it is still used).
Finding the .rtm file can be hard since it is only loaded at run-time and not at edit time(?). If someone encounters this issue, a working method:
- rename the rtm file (so it cannot be found)
- open the vis that you suspect are using this file AND try to edit the run-time menu. When this vi uses the run-time menu a warning will appear (cannot load rtm file, using default menu instead)
Kind regards,
Mark

Dear Mr. Beuvink,
thank you for your reply. It seems that a while back this problem has been reported to our R&D group. The request (CAR) has ID; 41579. There is the following statement in this CAR: the caller vi is in memory or not. When a caller vi is in memory, rtm files will currently never report the vi as a caller. This confirms the behavior you are seeing.
I'm sorry to say I don't have a solution at this moment, at this moment they are busy fixing this problem. You can look this up in future release notes by searching on the CAR ID I mentioned.
If you haven any questions, please don't hesitate to contact me.
Best regards,
Martijn S
Applications Engineer
NI Netherlands

When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data. This problem does not occur when I manually sync music to my phone. Is this a common bug, and if so; is there a fix?

When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data on the phone. This problem does not occur when I manually sync music to my phone only when I access imatch. Is this a common bug, and if so; is there a fix?

yes it is. you can sign out of itunes account then sign back in. use http://support.apple.com/kb/ht1311 to sign out.

Number of address book contacts on MacBook Air using iCloud is one less than my other iDevices using iCloud. Is this a known bug?

Number of address book contacts on MacBook Air using iCloud is one less than my other iDevices using iCloud. Is this a known bug? I've checked for duplicates on my iDevices and I can't find any. Additionally, I have wiped all the data from the Application Support folder of the address book and re-connected to iCloud, but it always shows 308 contacts instead of 309 found on iCloud and the rest of my devices. Any ideas?

Number of address book contacts on MacBook Air using iCloud is one less than my other iDevices using iCloud. Is this a known bug? I've checked for duplicates on my iDevices and I can't find any. Additionally, I have wiped all the data from the Application Support folder of the address book and re-connected to iCloud, but it always shows 308 contacts instead of 309 found on iCloud and the rest of my devices. Any ideas?

Is this a JOGL bug with GLJPanel, a driver problem, or what?

I've been trying to eliminate a problem I've been experiencing with my WorldWind Java (WWJ) application and I think I've finally taken a step torward finding the root cause, but I'm not sure whose problem it is yet or who to report it to, so I thought I'd start here and work my way up; if it can't get solved here, maybe it's a driver issue.
The issue goes something like this:
(Note: this only occurs when the -Dsun.java2d.opengl=true flag is set.)
I have a GLJPanel on my primary display that works beautifully. I drag that panel onto my secondary display (slowly) and it disappears. Poof. If I position the panel halfway between screens, I can get about half of the panel to render on the secondary display, but any further than that and it disappears. I tried this on a Frame and with a GLCanvas as well and got different results: in a Frame, if I dragged the Panel over and then dragged it back into the primary display, it would disappear on the secondary display, but reappear on the primary display once it was dragged back. With the GLCanvas, I didn't have any issues.
It's fairly simple to recreate this on my computer by using a WorldWind example that extends ApplicationTemplate and just adjusting ApplicationTemplate to use WWGLJPanels.
However, I went so far as to reproduce the problem with a plain old GLJPanel:
import com.sun.opengl.util.Animator;
import java.awt.GridLayout;
import javax.media.opengl.GL;
import javax.media.opengl.GLAutoDrawable;
import javax.media.opengl.GLJPanel;
import javax.media.opengl.GLCapabilities;
import javax.media.opengl.GLEventListener;
import javax.swing.JFrame;
public class TrianglePanel extends JFrame implements GLEventListener {
    public TrianglePanel() {
        super("Triangle");
        setLayout(new GridLayout());
        setSize(300, 300);
        setLocation(10, 10);
        setVisible(true);
        initTriangle();
    public static void main(String[] args) {
        TrianglePanel tPanel = new TrianglePanel();
        tPanel.setVisible(true);
        tPanel.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    private void initTriangle(){
        GLCapabilities caps = new GLCapabilities();
        caps.setDoubleBuffered(true);
        caps.setHardwareAccelerated(true);
        GLJPanel panel = new GLJPanel(caps);
        panel.addGLEventListener(this);
        add(panel);
        Animator anim = new Animator(panel);
        anim.start();
    public void init(GLAutoDrawable drawable) {
        GL gl = drawable.getGL();
        gl.glClearColor(0, 0, 0, 0);
        gl.glMatrixMode(GL.GL_PROJECTION);
        gl.glLoadIdentity();
        gl.glOrtho(0, 1, 0, 1, -1, 1);
    public void display(GLAutoDrawable drawable) {
        GL gl = drawable.getGL();
        gl.glClear(GL.GL_COLOR_BUFFER_BIT);
        gl.glBegin(GL.GL_TRIANGLES);
        gl.glColor3f(1, 0, 0);
        gl.glVertex3f(0.0f, 0.0f, 0);
        gl.glColor3f(0, 1, 0);
        gl.glVertex3f(1.0f, 0.0f, 0);
        gl.glColor3f(0, 0, 1);
        gl.glVertex3f(0.0f, 1.0f, 0);
        gl.glEnd();
        gl.glFlush();
    public void reshape(GLAutoDrawable drawable, int x, int y, int width, int height) {}
    public void displayChanged(GLAutoDrawable drawable, boolean modeChanged, boolean deviceChanged) {}
}If it helps, the video card I'm using is a Quadro NVS 140M.

steffi wrote:
This is a bug that I'm seeing in Apple's new MobileMe service and I believe they are making use of the System Messaging Server product. (Sun Java(tm) System Messaging Server 6.3-6.03)I can't comment on what Apple may or may not be using ;)
Specifically I have an email that's MIME HTML and what I observe is that lines >999 chars are being truncated so in my case the nested table doesn't render correctly because a whole chunk of the HTML itself on this line has been truncated.The email client generating the message is broken and Messaging Server is 'fixing' the email by truncating the line to the maximum line-length as per the standards.
Refer to "2.1.1. Line Length Limits" in http://www.faqs.org/rfcs/rfc2822.html
Regards,
Shane.

Is this a know bug with the Mail server?

This is a bug that I'm seeing in Apple's new MobileMe service and I believe they are making use of the System Messaging Server product. (Sun Java(tm) System Messaging Server 6.3-6.03)
Specifically I have an email that's MIME HTML and what I observe is that lines >999 chars are being truncated so in my case the nested table doesn't render correctly because a whole chunk of the HTML itself on this line has been truncated.
The message fails to render correctly in their Web Client but also in Mail.app when it's accessed over IMAP4

steffi wrote:
This is a bug that I'm seeing in Apple's new MobileMe service and I believe they are making use of the System Messaging Server product. (Sun Java(tm) System Messaging Server 6.3-6.03)I can't comment on what Apple may or may not be using ;)
Specifically I have an email that's MIME HTML and what I observe is that lines >999 chars are being truncated so in my case the nested table doesn't render correctly because a whole chunk of the HTML itself on this line has been truncated.The email client generating the message is broken and Messaging Server is 'fixing' the email by truncating the line to the maximum line-length as per the standards.
Refer to "2.1.1. Line Length Limits" in http://www.faqs.org/rfcs/rfc2822.html
Regards,
Shane.

Is this a Weblogic bug?

Hi all,
Please help....I really don't know what to do with this problem as have try all methods that I know of...
I suspect is this a Welogic bug? It happens intermittently too.....
Need help on this weird exception i have. My stateless session EJB attempts to
create an transaction when the exception occurs. My server is WL8.1 powered by
Jdk1.4.2_05. My server is not using SSL, so find it strange that some certification
is involved.
java.lang.ExceptionInInitializerError
at javax.crypto.Cipher.a(DashoA6275)
at javax.crypto.Cipher.getInstance(DashoA6275)
at com.entrust.toolkit.security.provider.AnsiRandom1.engineSetSeed(AnsiRandom1.java)
at java.security.SecureRandom.setSeed(SecureRandom.java:369)
at weblogic.transaction.internal.XidImpl.seedRandomGenerator(XidImpl.java:378)
at weblogic.transaction.internal.XidImpl.create(XidImpl.java:266)
at weblogic.transaction.internal.TransactionManagerImpl.getNewXID(TransactionManagerImpl.java:1719)
at weblogic.transaction.internal.TransactionManagerImpl.internalBegin(TransactionManagerImpl.java:249)
at weblogic.transaction.internal.ServerTransactionManagerImpl.internalBegin(ServerTransactionManagerImpl.java:303)
at weblogic.transaction.internal.ServerTransactionManagerImpl.begin(ServerTransactionManagerImpl.java:259)
at weblogic.ejb20.internal.MethodDescriptor.startTransaction(MethodDescriptor.java:255)
at weblogic.ejb20.internal.MethodDescriptor.getInvokeTx(MethodDescriptor.java:377)
at weblogic.ejb20.internal.EJBRuntimeUtils.createWrapWithTxs(EJBRuntimeUtils.java:325)
at weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java:64)
at care2.preEnlisteeMgmt.business.assignmInstr.assignmInstrMgr.AssignmInstrMgrBean_xghsg0_EOImpl.setAssignmInstrs(AssignmInstrMgrBean_xghsg0_EOImpl.java:85)
at care2.preEnlisteeMgmt.business.assignmInstr.AssignmInstrDelegate.setAssignmInstrs(AssignmInstrDelegate.java:116)
at care2.presentation.assignmInstr.AssignmInstrDisplayAction.execute(AssignmInstrDisplayAction.java:205)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
at javax.crypto.SunJCE_b.(DashoA6275)
... 33 more
Caused by: java.security.PrivilegedActionException: java.security.InvalidKeyException:
InitVerify error: java.security.NoSuchAlgorithmException: Cannot find any provider
supporting RSA/ECB/PKCS1Padding
at java.security.AccessController.doPrivileged(Native Method)
... 34 more
Caused by: java.security.InvalidKeyException: InitVerify error: java.security.NoSuchAlgorithmException:
Cannot find any provider supporting RSA/ECB/PKCS1Padding
at iaik.security.rsa.RSASignature.engineInitVerify(RSASignature.java)
at java.security.Signature.initVerify(Signature.java:297)
at iaik.x509.X509Certificate.verify(X509Certificate.java)
at iaik.x509.X509Certificate.verify(X509Certificate.java)
at javax.crypto.SunJCE_b.c(DashoA6275)
at javax.crypto.SunJCE_b.b(DashoA6275)
at javax.crypto.SunJCE_s.run(DashoA6275)
... 35 more

Hi all,
Please help....I really don't know what to do with this problem as have try all methods that I know of...
I suspect is this a Welogic bug? It happens intermittently too.....
Need help on this weird exception i have. My stateless session EJB attempts to
create an transaction when the exception occurs. My server is WL8.1 powered by
Jdk1.4.2_05. My server is not using SSL, so find it strange that some certification
is involved.
java.lang.ExceptionInInitializerError
at javax.crypto.Cipher.a(DashoA6275)
at javax.crypto.Cipher.getInstance(DashoA6275)
at com.entrust.toolkit.security.provider.AnsiRandom1.engineSetSeed(AnsiRandom1.java)
at java.security.SecureRandom.setSeed(SecureRandom.java:369)
at weblogic.transaction.internal.XidImpl.seedRandomGenerator(XidImpl.java:378)
at weblogic.transaction.internal.XidImpl.create(XidImpl.java:266)
at weblogic.transaction.internal.TransactionManagerImpl.getNewXID(TransactionManagerImpl.java:1719)
at weblogic.transaction.internal.TransactionManagerImpl.internalBegin(TransactionManagerImpl.java:249)
at weblogic.transaction.internal.ServerTransactionManagerImpl.internalBegin(ServerTransactionManagerImpl.java:303)
at weblogic.transaction.internal.ServerTransactionManagerImpl.begin(ServerTransactionManagerImpl.java:259)
at weblogic.ejb20.internal.MethodDescriptor.startTransaction(MethodDescriptor.java:255)
at weblogic.ejb20.internal.MethodDescriptor.getInvokeTx(MethodDescriptor.java:377)
at weblogic.ejb20.internal.EJBRuntimeUtils.createWrapWithTxs(EJBRuntimeUtils.java:325)
at weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java:64)
at care2.preEnlisteeMgmt.business.assignmInstr.assignmInstrMgr.AssignmInstrMgrBean_xghsg0_EOImpl.setAssignmInstrs(AssignmInstrMgrBean_xghsg0_EOImpl.java:85)
at care2.preEnlisteeMgmt.business.assignmInstr.AssignmInstrDelegate.setAssignmInstrs(AssignmInstrDelegate.java:116)
at care2.presentation.assignmInstr.AssignmInstrDisplayAction.execute(AssignmInstrDisplayAction.java:205)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
at javax.crypto.SunJCE_b.(DashoA6275)
... 33 more
Caused by: java.security.PrivilegedActionException: java.security.InvalidKeyException:
InitVerify error: java.security.NoSuchAlgorithmException: Cannot find any provider
supporting RSA/ECB/PKCS1Padding
at java.security.AccessController.doPrivileged(Native Method)
... 34 more
Caused by: java.security.InvalidKeyException: InitVerify error: java.security.NoSuchAlgorithmException:
Cannot find any provider supporting RSA/ECB/PKCS1Padding
at iaik.security.rsa.RSASignature.engineInitVerify(RSASignature.java)
at java.security.Signature.initVerify(Signature.java:297)
at iaik.x509.X509Certificate.verify(X509Certificate.java)
at iaik.x509.X509Certificate.verify(X509Certificate.java)
at javax.crypto.SunJCE_b.c(DashoA6275)
at javax.crypto.SunJCE_b.b(DashoA6275)
at javax.crypto.SunJCE_s.run(DashoA6275)
... 35 more

Is this perhaps a bug in iPhoto?

Similar Messages

Maybe you are looking for